How to use TB-DVI adapter?

connect a monitor with a TB-DVI adapter(A1305), but there is no signal。

Create your Servlet under the directory
%ORACLE_HOME%\panama\server\classes\oracle\panama\adapter\servlet.
The servlet should have the package declaration
package oracle.panama.adapter.servlet;
Copt the class file to the above mentioned directory.
Then create a service using this class.
Give the entire class name for the service
eg
package oracle.panama.adapter.servlet.Test
where test is the servlet class name.
null

Similar Messages

  • How to use digital av adapter with iphone4

    How to use digital av adapter with iphone4

    you can connect it to the iphone4's connector and then you can start an app which support av out like apples video app and then it will display on the tv connected
    the iphone4 don't support mirror though so only apps which support tv out will work with it

  • Help! Problem using Mini-DVI adapter

    I'm a teacher, and I need some help.
    I've been using a Mitsubishi XD 250 data projector at school. The setup I have is exactly the same as it was last year, but something strange is happening.
    The data projector uses VGA, so I have the VGA-to-Mini-DVI adapter from Apple.
    I turned on the projector this morning, as I have a presentation for one of my classes today, but it's not working! The projector comes on, and the iMac shows that it recognizes the external display, but the projector says "No Signal." I have no idea what the problem is, as I've tried restarting both the iMac and the projector as well as connecting and disconnecting the cables.
    Any suggestions? I suppose it's possible that something happened to the VGA cable over the summer, but is that likely considering that the iMac recognizes the external display?
    I really need to give this presentation today, so any help would be greatly appreciated!

    Dett;
    It is probably simply the wrong signal source being set on your projector. This is normally a remote control switch or your projector. I don't know this model but they all have multiple input choices. Change the input until you see your Mac.
    Hope this helps
    Steppenwolf

  • How to use a servlet adapter ?

    Hi all,
    I try to use the servlet adapter, but documentation is not very usefull on this point (like on many other point).
    The first step in documentation is : Create a directory in the classpath oracle.panama.adapter.servlet for the .class
    file. The MasterService creation should go smoothly (if you pray I suppose) if you also have the .class file in a similar directory where you
    are running the Service Designer.
    Questions :
    - I dont understand ' create a directory in the classpath oracle.panama.adapter.servlet'.
    What does it mean ?
    - How can I make the same thing on the client which running the Service Designer ?
    All input are welcome.
    rgds,

    Create your Servlet under the directory
    %ORACLE_HOME%\panama\server\classes\oracle\panama\adapter\servlet.
    The servlet should have the package declaration
    package oracle.panama.adapter.servlet;
    Copt the class file to the above mentioned directory.
    Then create a service using this class.
    Give the entire class name for the service
    eg
    package oracle.panama.adapter.servlet.Test
    where test is the servlet class name.
    null

  • How to use USB Y adapter with HDD 500GB V63700-A

    Hi,
    My external HDD V63700-A500GB has difficulty working in my USB2.0 4 port adapter.
    I thought perhaps it needs more power going into it.
    So I bought a USB-Y but I can not figure out how to use it.
    It has 2 male USB connector wires and a very small narrow one which does not go into the thin wide socket of the above HDD.
    Anybody uses these things to advise me how to?
    ...... thanx
    .....nick

    Thanx Joel,
    definitely looks like the correct one but, can you give me a link on where to get it?
    I keep googling for a "USB-Y cable for external hd" with no luck.
    .........nick

  • How to use SOAP sender adapter

    Hi all
    i have configured the SOAP sender adapter. Now my 3rd party needs to send me a soap message. 
    I have checked that the status at the following URL is OK:
    http://host:port/XISOAPAdapter/MessageServlet?channel=:MXII_Web_Service:SOAP_MXII_Sender.
    This is fine, however
    I am unsure of the following:
    1. Does XI make a wsdl available to the 3rd party?
    2. Where does my 3rd party send the soap message to?
    3. Is the SOAP message sent via a query string?
    4. Do I need to create a web service?
    Thanks for all your help in advance
    Clinton

    Hi Moorthy
    Thanks for your answer.
    The problem was solved, we used .Net to write a webservice to our wsdl.
    I have now another problem.... When the message comes into XI it shows that no receiver found(RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC). If I just test the scenario with a file adpter as Sender, and Receiver it is fine, but when using the SOAP adapter as Sender, it gives me the no receiver found message.
    Any help with this issue will be appreciated.
    Thanks again
    Clinton

  • How To Use External Bluetooth Adapter?

    My desk is about 15' from my Mac Mini (running 10.8.2). I'm using an Apple Bluetooth Keyboard and Magic Mouse. The keyboard works pretty well but the mouse is awful. It frequently drops the connection and is erratic most of the time when it is connected. Signal strength is low, varrying between -75 and -84 dBm according to the Connection RSSI graph in System Preferences. In hopes of improving the situation I got a USB extension cable and a USB Bluetooth dongle with the thought that I could find a location for the dongle that would give me better signal strength.
    So far, I'm not seeing much – if any – improvement and I'm wondering if I'm actually using the external adapter. Does anybody know of a way to tell which adapter is being used? Of if this strategy will even work?

    Hi
    Can you please tell me which USB adapter you try to use? Please send the PAXXXX number.

  • How to use a result adapter ????

    Hi all,
    I try to use a result adapter. I use the result adapter wich is in the walkthrough of this marvelous documentation :-(
    I just make some adaptations,very simple, but nothing work, the result is always an empty page.
    If someone could give me a simple sample of adaper result, I will be very happy.
    Thanks,

    I tested this stylesheet and got this error message:
    oracle.panama.pasm.PASMException: Missing entity 'href'.
    Any help would be appreciated.
    Thanks,
    Dario
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Aparikh:
    Use this adapter result
    <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
    <xsl:template match="/">
    <xsl:apply-templates select="ServiceRequest//AdapterResult"/>
    </xsl:template>
    <xsl:template match="AdapterResult">
    <SimpleResult>
    <SimpleContainer>
    <SimpleMenu title="Portfolio Results">
    <xsl:for-each select="Table/Row">
    <SimpleMenuItem>
    <xsl:attribute name="target">___REQUEST_NAME__?PAservicepath=___SERVICE_URL_ENC__&PAsection=PortfolioDetails&href=<xsl:value-of select="./href"/></xsl:attribute>
    <xsl:value-of select="./name"/>
    </SimpleMenuItem>
    </xsl:for-each>
    </SimpleMenu>
    </SimpleContainer>
    </SimpleResult>
    </xsl:template>
    </xsl:stylesheet>
    Thanks .<HR></BLOCKQUOTE>
    null

  • How to use the JDBC adapter

    Hello Every one,
    we have third party sales order process systems in our company, one system is in Borland data base and the other is using SQL Server. presently what we are doing is sending this orders from respective databases to SAP using LSMW (XLs spreadsheets)on nightly basis. so the challenge is we want to USE SAP-XI instead of LSMW, could any one tell me what could be the right idea for this. please give me some  suggestions. thanks in advance.
    kind regards,
    Gayatri.

    Hi Gayatri,
    You can refer the following links to give you a clear idea about your query.
    http://help.sap.com/saphelp_nw04/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
    The links there can be further expanded to get more information
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
    /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
    then
    check this document:
    How To Install and Configure External Drivers for JDBC & JMS
    https://websmp206.sap-ag.de/~sapdownload/011000358700003994312004E/HowTo_ConfigExtAdapters.pdf
    Regards,
    Ramesh.

  • How to use Oracle File Adapter in OSB

    We are trying to use File Adapter in OSB 11g. Is it supported in this version? If yes then some one can specify a document which contains File Adapter - OSB integration steps.

    according to the ESB JCA transport:
    [ESB JCA|http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15866/jca.htm#i1106345]
    http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15866/jca.htm#i1106345
    there is only these adapters:
    _25.2.1 Adapter Support_
    The Oracle Service Bus JCA transport lets you interact with the following JCA-compliant adapters:
    Oracle Adapter for Oracle Applications
    Oracle JCA Adapter for AQ
    Oracle JCA Adapter for Database
    Oracle JCA Adapter for Files
    Oracle BAM Adapter (Business Activity Monitoring)
    PeopleSoft (Oracle Application Adapters 10g)
    SAP R/3 (Oracle Application Adapters 10g)
    Siebel (Oracle Application Adapters 10g)
    J.D. Edwards (Oracle Application Adapters 10g)
    See the following guides for more information on Oracle adapters:
    I wanna use FTP Adapter and MQ Adapter in Oracle ESB 11.1.1.3, can we make it?

  • How to use a HTTP adapter

    Hi experts,
    We have the following scenario: ABAP PROXY -> XI -> HTTP
    We must send several parameters, in XML format, to the HTTP destination (something like http://abc.com.br/xy/ml). The expected parameter in the HTTP server is names ParXML. Anyone got an example of that.
    Thanks,
    Haroldo

    Please Refer following links...
    http://help.sap.com/saphelp_nw2004s/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
    /people/siva.maranani/blog/2005/09/15/push-data-to-mvc-architectured-application-using-xi
    Http response in XML format
    HTTP Adapter - xml format ?
    Venkat.

  • How to use File Adapter Receiver to write attachments

    Hi,
    i have a scenario, in which our own XInotes adapter sends an XIMessage from an IBM Lotus Notes database into XI. This XIMessage contains an XML document as application main document and several PDF files as additional attachments 
    On the receiver side, i must use a File Adapter to write both the XML documents and the PDF attachments into a directory.
    The problem is i don't know how to use the file adapter receiver to write the attachments. In the Channel Monitoring, i can see that all PDF files are transferred to the file receiver. But the file adapter writes only the XML document into the directory.
    I've also tried the AF_Modules/PayloadSwapBean, but it can only swap one PDF file into the application payload. And the file name must be hard coded in the module configuration as swap.KeyName.
    Could anyone give me any ideas?
    thanks a lot in advance
    Xiang

    hi,
    receiver file adapters do not supprt attachments.
    Only File Sender adapter is capable of handling attachments not the receiver.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/a20c4cfea96b498b1e1af3f32f0670/frameset.htm
    Configuring the sender FILE adapter
    The sender file adapter is configured to pick the normal payload (file1.xml), which is specified in the File
    access parameters, and the additional image file (file1.jpg) that is to be sent as an attachment is configured
    under the Additional File(s) as shown in the screenshot below. The file type would still remain binary.
    Since, by default, XI sends payload and attachments in XML format, we need to call two beans, namely the
    MessageTransformBean and the PayloadSwapBean to help us is transforming the content to jpeg format
    and also change the file extension.
    The PayloadSwapBean module is used to replace the application payload of the XI message that holds the
    data with another payload which is appended to the message as an attachment. In our case, the payload
    would be file1.xml whereas the attachment would be file1.jpg
    The swap module is denoted in our scenario with the module key ‘swap’. It has two parameters from the
    MIME header.
    regards,
    pradeep.

  • How to Use JCA adapter

    Hello.
    I have a JCA compliant adapter that i like to use to integrate a legacy application but i have seen no information on how to use a JCA adapter from Oracle Integration.
    Any help is appreciated.

    Hi Gerardo
    Oracle Interconnect 10g enables third party adapter integration through a proprietary SDK, which is not JCA compliant.
    Oracle ProcessConnect relies on JCA (plus more) for communicating with standard and third party adapters. Since ProcessConnect 10g is based on JCA 1.0 (due to spec availability), Oracle had to extend the JCA 'contract' with certain Design Time and Runtime inbound API's which an adapter also must implement in order to seamlessly interoperate with ProcessConnect. Oracle can provide you with the necessary ADK (Adapter Development Kit) if you join the Early Access program.
    Please indicate here if you would like to join this program and I will provide you with pertinent contact information so you can initiate this.

  • Black bands cut off full projection with DVI adapter

    I used my DVI adapter for the first time today to connect my MacBook Pro (17") to a projector. I selected video mirroring from my System Preferences and ran a PowerPoint (for Mac) presentation in slide show mode.
    The projector displayed the presentation but black bands appeard on my laptop display, which cut off some of the left and right side of the projected PowerPoint presentation.
    Anyone know how I get rid of the black bands and get the full image from my laptop display projected?
    (FYI, I use PowerPoint instead of Keynote because it's easier for my clients. I know, I know, that's sad.)

    How are you actually connected to the TV?  Does it have HDMI?  Most non-widescreen TVs would not.
    I would suspect a converter is either not outputting properly, your TV not interpreting the signal properly or you have some form of Zoom setting enabled on the TV.
    How does your TV handle widescreen from say cable or terrestrial TV sources ?
    Unfortunately AppleTV is not designed to be used with non-widescreen TVs so there's no setting on AppleTV to tweak.
    AC

  • Using the Ariba adapter

    Can anyone tell me how to use the Ariba adapter, and where to find documentation?

    Can you explain more about your requirement and the use of ariba adapter in your implementation.?
    Thanks
    Sree

Maybe you are looking for