How to use Text Variables to make Running Footers

I'm confused about how Text Variables are behaving in the creation of Running footers on a pair of master page.
My document has 3-6 Steps on each page. Each Step is designated with a unique character style called StepName.
I want a running footer that has the first instance of StepName on the left page and the last instance of StepName on the right page. Like a dictionary.
I can get the correct text to appear, but then it adds an unwanted ParagraphStyle (a substep letter) that gives me this:
A) Open the File
when what I want is just this:
Open the File
The Character Style StepName is not based on any other style.
I have seen this done but can't understand why I'm picking up a lettering scheme on the footer.
-Christian

Sounds like you have a numbered list applied to the paragraph style of your footer. It's either part of the paragraph style of the footer or it's local formatting. Either way, you can turn it off by selecting the paragraph and clicking on the numbered list button on the paragraph panel or the main control panel. Or you can edit the style and under bulleted and numbered lists change the list to none.

Similar Messages

How to use text variables?

Hi,
I have a text variable 'ZEMAIL' with data element 'COMM_ID_LONGu2019.The routine corresponding to this is 'GET_ZEMAIL' in 'ZHKMIT30' program.
Now I have to retrieve emloyee E-mail ID (infotype 0105 i.e.PA0105 DB table, subtype 0010, field USRID_LONG) and has to populate in ZEMAIL. How?
I am very new to this text variables concept
How to get this text variable implemented? Please help.

select pernr subty usrid_long
         from pa0105
             into table it_pa0105
          where pernr in s_pernr
         and subty = '0010' .
loop at it_pa0105.
ZHKMIT30-ZEMAIL = it_pa0105-usrid_long.
insert ZHKMIT30.
endloop.

Time Format using text variable with replacement path

Hi Friends,
I've used "Text variable with replacement path" to make the column heading dynamic by replacing the values referring from "0calday"...
everything is working fine, but here it is displaying the time format like
YYYYMMDD (20030101), i want it to be displayed DDMMYYYY (01012003) in the column heading... how to make it possible?
pls waiting for ur inputs, it's an urgent...
Regards,
Pattnaik

Hi Satyakam,
In the text variable properties make sure that in the replacment path you have chosen "Text" to appear date as per user setting . Other wise as in your case it must be set to "Key" which always shows in the format YYYYMMDD.
Hope that helps.
Regards
Mr Kapadia

Using Text Variable in BEx Formula

Hi Everyone,
I have two columns in BEx query. First column shows the value based on variable ZFISCPER_M(based on fiscal year/period).
The other column shows the value for period ZFISCPER_M minus 1 (I have used offset in variable).
So if my user inputs 009.2009, the first column will show values for 009.2009 and 2nd column will show values for 008.2009.
In the third column I have formula : 2nd column minus 1st column. I want to use text variable to display column heading. The heading in the 3rd column should be 009.2009.
Can anyone guide me how to achieve this?
Regards
Utpal

Hi Rakesh,
My first column shows cumulative balance upto 009.2009; My second column shows the cumulative balance upto 008.2009; In the third column I am trying to display balance for the month - not the cumulative figure. So for the third column my heading should be For the month 009.2009
But when I substract col 2 - col 1in third column; the text variable finds two different values(009.2009 & 008.2009). Hence it is not displaying any text.
I hope this makes my question clear.
Regards
Utpal

How to use the variables used in the message mapping

Hi ,
In the message mapping we can declare variables in the JAVA section , these variables could be used across the mapping .
I have tried using it but I am unable to retrieve the values assigned to the variables in one UDF into the another UDF .
Please guide me how to use the variables declared in the JAVA section in the message mapping .
Thanks
Anita Yadav

Anita,
I have worked on the Global variables and i found no issues. Make sure that the variable is declared in the Declaration Section and then initlaized in the Initialization section.
If you declare a variable in the Declaration Section ,
int i;
then in any udf you can use if directly. No need to re declare the variable in the UDF. If you do this, then it becomes a local variable.
Regards,
Bhavesh

How to use ADF variables in C:when test?

I have a <af:iterator in my page fragment as follows
<af:iterator id="i1" value="#{queryModel.currentDescriptor.conjunctionCriterion.criterionList}" var="criterion" varStatus="vs">
Within this iterator, I want to make a decision absed on the index of the iterator. To do this test, I am using jstl as follows
<c:when test="${vs.index == '0' or vs.index == '2' or vs.index == '4'}">
This test is however always evaluating to false. I have tried cahnging my code using various combiantion as below ...
<c:when test="#{vs.index == '0' or vs.index == '2' or vs.index == '4'}">
<c:when test="${vs.index == 0 or vs.index == 2 or vs.index == 4}">
<c:when test="${vs.index == '0' || vs.index == '2' || vs.index == '4'}">
But nothign seems to be working fine.
Can some one help me with what I am doing wrong?
Thanks.

How to use ADF variables in <C:when test?

How to use a variable on columns using Oracle Data Integrator

How to use a variable in oracle Data Integrator expically on colums.

yes exactly,i selected update on new column,if i didn't select update on new colum then error is not coming regarding update.
but this time error is coming on "insert new rows".
java.lang.NullPointerException
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.bindSessVar(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.bindSessVar(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskPreTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source).
Can u please tell me what stpes i have to follow to solve this

How to use shared variables?

Hello..
Can anybody please guide me in using shared variables... I'm learning LabVIEW 8.5.... But did not understand how to use shared variables... I tried to read web pages regarding shared variables but got confused.... So anyone can please help me...?
Thanks for any help from you...

You will have to give us the whole picture. What is your client computer; a PAC, desktop etc? What are you running on the client computer; a VI or an executable? Where are you going to deploy your library? On the host machine or the client machine?
If I assume that you are running a VI on the client machine and are depolying the library on the host, all you have to do is to create another shared variable and bind it to the variable on the host machine. You can do this by checking the Bind to Source option when creating the variable and browsing to the network item in options. Be sure to have the library deployed on the host side before you attempt to do this otherwise you won't be able to find the variable.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

How to display text variable of type customer exit

Hi to all,
I have created a query in query designer which display sales value according to plant.
There i have also used a variable which will take input from user and restricted on 0CALDAY.
I have also created 2 text variable to display the text for sales based on input in variable.
I need when user enter the 01.02.2010 - 31.12.2010 value in variable , text variable should display SALES FROM 01.02.2010 TO 31.12.2010
i knew how to do that by using text variable of processing type customer exit.
But display of text variable is like SALES FROM 01022010 TO 31122010 ,
But i need that SALES 01.02.2010 TO 31.12.2010
i shall be thankfull to you for this.
Regards
Pavneet Rana
Edited by: pavneet rana on Dec 22, 2010 7:46 AM
Edited by: pavneet rana on Dec 22, 2010 8:03 AM

Hi,
Give Description on Sales Amount as SALES FROM &ZVAR_YEAR1& TO &ZVAR_YEAR2&.
ZVAR_YEAR1 & ZVAR_YEAR2 are the two text variables. These two variables should NOT be input enabled.
In the Exit - under I_STEP = 2, write the below code.
WHEN 'ZVAR_YEAR1'.
DATA:   l_s_range       TYPE rs_s_range,
               loc_var_range TYPE rrs0_s_var_range.
READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'ZVAR_INPUT_CALDAY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
l_s_range-low = loc_var_range-low.
APPEND l_s_range to e_t_range.
WHEN 'ZVAR_YEAR2'.
DATA:   l_s_range       TYPE rs_s_range,
               loc_var_range TYPE rrs0_s_var_range.
READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'ZVAR_INPUT_CALDAY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
l_s_range-low = loc_var_range-high.
APPEND l_s_range to e_t_range.

How can use a variable in the folowing code?

How can use a variable 'W_ROWNUM2' in the folowing code?
MOVE '1' TO CNT.
LOOP AT L_T_PM2.
              CONCATENATE '0' CNT INTO W_ROWNUM2.CONDENSE W_ROWNUM2.
               CONCATENATE 'F110V-VARI'W_ROWNUM2'(01)' INTO FLD2.
    perform DYNPRO_FIELD       using FLD2
                                 L_T_PM2-vari12_con.
               CNT = CNT + 1.
               CONDENSE CNT.
ENDLOOP.
I need to increment the value of W_ROWNUM2.
Please ,it is urgent!!

Hello
CONCATENATE 'F110V-VARI'W_ROWNUM2'(01)' INTO FLD2.
Try using spaces between parts of the resulting string.
CONCATENATE 'F110V-VARI' W_ROWNUM2 '(01)'   INTO FLD2
Regards
Greg Kern.

How to use bind variables in the following query

CREATE OR REPLACE PROCEDURE MMDB.test IS
sel_qtn VARCHAR2 (10);
CURSOR PT_QUANTITY IS select * from mmdb.product_tree WHERE QUANTITY_CHECK ='E'
AND run_id = 100
a PT_QUANTITY%ROWTYPE;
BEGIN
FOR i IN PT_QUANTITY
loop
sel_qtn := i.quanttity-1;
While sel_qtn>=1
loop
insert into mmdb.product_tree (BILLING_ACCOUNT_NO ,S_CODE) values (i.BILLING_ACCOUNT_NO ,i.S_CODE||'E');
sel_qtn :=sel_qtn -1;
End loop;
commit;
end;

Don't duplicate threads: How to use bind variables in the following query

Show the period value in column header using Text Variable

We are using Posting Period & Financial Year to calculate YTD & MTD, for current year and previous years. These posting period and financial year characteristics are custom created characteristics we are using due to customer specific requirement.
Input values are posting period, financial year and numeric value. To calculate previous year, I need to subtract numeric value from the input financial year. Every thing is working fine up to this.
In the report I need to show the posting period and financial year values dynamically in each column header of the report for MTD, YTD for current year & previous year. I tried to achieve this using Text Variables, but I didnt succeed. If some one can give me some idea to resolve this, it would be very helpful.
I am excellent in ABAP coding. If you can specify me to code in User Exit, I can do it.
Column headers should be 08.1999 Sales Qty, 08.2008 Sales Qty, 1999 Sales Qty, 2008 Sales Qty.

Hi Abhinav,
Try using the content text variables 0T_FYEAR and 0T_FPER3, when used in the head these variable should display the year and period specified in the RKF.
e.g
&0T_FPER3&. &0T_FYEAR& Sales Qty = 08.1999 Sales Qty
If that doesnt work, try creating text replacement path variables referencing the variables you created for the year and period input. To do this click on the RKF and click on the dropdown by the yellow box next to the description on the general tab and select New Variable, enter the description, tech name and set processng by to Replacment Path, then select period as the ref. characteristic, then on the replacement path tab change replace variable with to variable and then select the variable you are using for the period input, save then hit ok, this is now a text representation of the variable your are inputing for period and can be used in the column headers, you will need to repeat the process for the fiscal year.
Hope this helps
Josh

How to use bind variables in this procedure

Hi Experts,
How to use bind variables in this procedure for static queries.
PROCEDURE DELETE_MER_PROC (M_id IN NUMBER)
IS
BEGIN
V_date DATE;
SELECT PD_DATE INTO v_date FROM PD_MAINTAIN;
    DELETE FROM MER_CLEAR
    WHERE MER_DT < v_date
    AND ID = M_ID;
COMMIT;
END;
How to use v_date and m_id as bind variables in this procedure to avoid hard parsing.
Please help me.
Thanks.

976208 wrote:
How to use v_date and m_id as bind variables in this procedure to avoid hard parsing.
You cannot avoid hard parsing - as the 1st time a SQL statement (like the SELECT or DELETE statements in your code) is encountered, it does not reside in the server's Shared Pool, and needs to be added into the pool via a hard parse.
Bind variables does not prevent hard parsing. Hard parsing happens when the SQL statement (with or without bind variables) is a brand new statement encountered by the server.
Bind variables enables the same SQL cursor to be reused, by simply changing the bind variable value.
Not using bind variables means that each SQL statement is unique and not shareable - as the value is hardcoded into the statement and cannot be changed via a bind value. This typically means LOTS of different SQL statements (where the only difference is the changed value in the statement) are created - with each statement being a new statement not seen before in the Shared Pool and needing to be hard parsed.
One does not design one's code not to be hard parsed. There ALWAYS will be a hard parse in order to get a SQL statement into the Shared Pool. One designs one's code to REUSE cursors in the Shared Pool.

How to use Bind Variables in Essbase data control

Hi,
I am trying to use Bind Variables in MDX query while creating the Essbase Data Control. I have used the below query with the Bind Variable.. this query is working in Essbase admin console..but it is throwing error (*Invalid MDX Query)* while creating Essbase Datacontrol in JDeveloper.
MDX Query : SELECT {[Measures].Msr_2} ON COLUMNS, [Time].Children ON ROWS FROM cube
where ($name)
Could any body suggest me on how to use bind variables with Essbase Data control.
Thanks,
Swathi

Hello Swathi, can you please help me how you created Essbase DataControl? Also were you able to figure out this?
Thanks, Praveen.

How to use bind variable

Hi,
I have the below cursor 1 which is working already.For my requirement i want to use bind variable like second cursor.But its telling Bind Variable "p_col_list" is NOT DECLARED.Please any onehelp me on this.
How to use bind variable Here.
Cursor1:
DECLARE
emp_cv sys_refcursor;
iid NUMBER := 1;
i_sql varchar2(100);
p_col_list varchar2(2000) := 'aaa,bbb,ccc,ddd';
BEGIN
i_sql := 'select '''||REPLACE(p_col_list, ',', ''',''')||''' from dual '||CHR(10) ;
dbms_output.put_line(i_sql);
OPEN emp_cv FOR i_sql ;
END;
Cursor2:
DECLARE
emp_cv sys_refcursor;
iid NUMBER := 1;
i_sql varchar2(100);
p_col_list varchar2(2000) := 'aaa,bbb,ccc,ddd';
BEGIN
i_sql := 'select '''||REPLACE(:p_col_list, ',', ''',''')||''' from dual '||CHR(10) ;
dbms_output.put_line(i_sql);
OPEN emp_cv FOR i_sql using p_col_list;
END;

hello,
the reports parameterform capabilities are limited. if you want
to create sophisticated parameterforms, you should do that with
oracle forms or html forms.
regards,
the oracle reports team --pw

How to use Text Variables to make Running Footers

Similar Messages

Maybe you are looking for