How to use the bootp_enabled key with dscl command create

During Netboot service configuration I wanted to do it right and followed the suggestions in "System Imaging and Software Update Administration" (page 22):
+"To prevent the NetBoot BootP server from responding to+
+requests for IP addresses, use the dscl command-line tool to open the local folder on the NetBoot server and add a key named bootp_enabled with no value to the /config/dhcp/ folder."+
so I first tried to read the local directory:
xadmin$ *sudo dscl . -read /config/dhcp/*
AppleMetaNodeLocation: /Local/Default
RecordName: dhcp
RecordType: dsRecTypeNative:config
and then to create the key:
xadmin$ *sudo dscl . -create /config/dhcp/ bootp_enabled*
* Uncaught Exception: <NSInvalidArgumentException> ([DSoDataNode initWithDir:value:] value is not a valid NSString nor NSData)
but did not succeed. Somthing must be wrong with the syntax. Tried several (Config, dhcp noslash, bootp_enabled:) but nothing helped.
You dscl experts - please enlighten me!
Btw. Apple why not include to correkt syntax in a manual?

worked for me, too
Thanks a lot,
Willi

Similar Messages

Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

Out of the box, to use the function keys as function keys, hold down the fn key when you press the key. Otherwise, you get the picture function on the key. You can reverse this behavior in the Keyboard system prefs.

How to use the class CL_CTMENU with the method DISABLE_FUNCTIONS

Hi Friends,
How to de-activate some functions in the Menu bar?
Eg: - Sales document
             Create
             Change
             Display
I want to de-activate "Change"
In other words: - How to use the class CL_CTMENU with the method DISABLE_FUNCTIONS in my program.
Regards,
Hari
Edited by: Bhatlapenumarthy Hari Krishna on Jun 9, 2008 5:22 PM

Krishna,
It is not possible to deactivate the CHANGE option in themenu bar using the method disable_functions of cass CL_CTMENU. This method allows you to deactivate only the function codes of the CONTEXT MENU, which is available only when u press the left mouse button.
U can use the SET PF-STATUS 'XXX' EXCLUDING fcodes option to disable the CHANGE.
*****Reward points if useful
Regards,
Kiran Bobbala

How to use the windows key (super or hiper) as a keystroke modifier?

I can associate the windows key (KeyEvent.VK_WINDOWS) as a regular key on a KeyStroke without problem.
It can be alone or with a modifier, like CTRL+WIN
KeyStroke.getKeyStroke( KeyEvent.VK_WINDOWS, InputEvent.CTRL_DOWN_MASK )My doubt is: Is there a way to use it as a modifier?
In other words, is it possible to create the KeyStroke using the windows key with any other? e.g. "WIN+K"
Thanks,
Henrique Abreu

Thanks a lot for the quick answer.
Your KeyboardCommands class doesn't do it (but gives the idea), because it can only trigger an action on one key (like KeyStroke, that handles key+modifier).
I could make big changes on it to add the functionality of triggering an event on a combination of keys, which would solve my problem.
Although this solution is not so good because we totally give up of actions in Swing, which I mean stuff like actionMaps, InputMaps WHEN_ANCESTOR_OF_FOCUSED_COMPONENT, etc.
If KeyStroke class really doesn't provide this (unbelievable!), I wonder if there is a way to extend and enhance it? (or AWTKeyStroke)
Can anyone say if its possible, before I go deep and find out that it isn't?
Another secondary question (that I think doesn't worth a new topic), what's the META_DOWN_MASK or META_MASK? or where is this key?
Henrique Abreu

How to use the default database service name on creating procedure for data

how to use the default database service name on creating procedure for datagaurd client failover ??? all oracle doc says create a new service as below and enable at DB startup. but our client is using/wanted database default service to connect from application on the datagaurd environment (rac to non rac setup).please help.
Db name is = prod.
exec DBMS_SERVICE.CREATE_SERVICE (service_name => 'prod',network_name =>'prod',failover_method => 'BASIC',failover_type => 'SELECT',failover_retries => 180,failover_delay => 1);
says already the service available.
CREATE OR REPLACE TRIGGER manage_dgservice after startup on database DECLARE role
VARCHAR(30);BEGIN SELECT DATABASE_ROLE INTO role FROM V$DATABASE;
IF role = 'NO' THEN DBMS_SERVICE.START_SERVICE('prod');
END IF;
END;
says trigger created, but during a swithover still the service is listeneing on listener.
tns entry.
prod =
(DESCRIPTION =
(ADDRESS_LIST =
(LOAD_BALANCE = YES)
(ADDRESS = (PROTOCOL = TCP)(HOST = prod1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = prod2)(PORT = 1521)) ---> primary db entry
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = proddr)(PORT = 1521)) --> DR DB entry
(CONNECT_DATA =
(SERVICE_NAME = prod)
thanks in advance.
Edited by: 854393 on Dec 29, 2012 11:52 AM

Hello;
So in the example below replace "ernie" with the alias you want the client to use.
I can show you how I do it :
First an entry need to be added to the client tnsnames.ora that uses a SERVICE_NAME instead of a SID.
ernie =
(DESCRIPTION =
    (ADDRESS_LIST =
       (ADDRESS = (PROTOCOL = TCP)(HOST = Primary.host)(PORT = 1521))
       (ADDRESS = (PROTOCOL = TCP)(HOST = Standby.host)(PORT = 1521))
       (CONNECT_DATA =
       (SERVICE_NAME = ernie)
)Next the service 'ernie' needs to be created manually on the primary database.
BEGIN
   DBMS_SERVICE.CREATE_SERVICE('ernie','ernie');
END;
/After creating the service needs to be manually started.
BEGIN
   DBMS_SERVICE.START_SERVICE('ernie');
END;
/Several of the default parameters can now be set for 'ernie'.
BEGIN
   DBMS_SERVICE.MODIFY_SERVICE
   ('ernie',
   FAILOVER_METHOD => 'BASIC',
   FAILOVER_TYPE => 'SELECT',
   FAILOVER_RETRIES => 200,
   FAILOVER_DELAY => 1);
END;
/Finally a database STARTUP trigger should be created to ensures that this service is only offered if the database is primary.
CREATE TRIGGER CHECK_ERNIE_START AFTER STARTUP ON DATABASE
DECLARE
V_ROLE VARCHAR(30);
BEGIN
SELECT DATABASE_ROLE INTO V_ROLE FROM V$DATABASE;
IF V_ROLE = 'PRIMARY' THEN
DBMS_SERVICE.START_SERVICE('ernie');
ELSE
DBMS_SERVICE.STOP_SERVICE('ernie');
END IF;
END;
/lsnrctl status - should show the new service.
When I do this the Database will still register with the listener. I don't give that to the clients. That one will still be available but nobody knows about it. Meanwhile "ernie" moves with the database role.
So in my example the default just hangs out in the background.
Best Regards
mseberg
Edited by: mseberg on Dec 29, 2012 3:51 PM

SSL: How to use the same key pair for ABAP & JAVA?

Hello,
I want to setup an XI (3.0 on Netweaver04)installation in the way, that ABAP AS and JAVA AS use the same key pair for SSL. My problem is to define the same private key on ABAP and JAVA. With the JAVA Administrator I am able to define or import a private key. But I could not find a possibility in ABAP to manage private keys in order to use the same on as in JAVA. What is the procedure for this?
Thanks and Regards,
Frank Tottleben

Hello,
I want to setup an XI (3.0 on Netweaver04)installation in the way, that ABAP AS and JAVA AS use the same key pair for SSL. My problem is to define the same private key on ABAP and JAVA. With the JAVA Administrator I am able to define or import a private key. But I could not find a possibility in ABAP to manage private keys in order to use the same on as in JAVA. What is the procedure for this?
Thanks and Regards,
Frank Tottleben

How to use the Function keys as function keys instead of action keys?

When I press F1 or any of the other F keys it does what the symbol says on the key (volume/skip track etc).
How do I actually use the F keys and not the symbols?

Hi again John,
...is there a way to switch that around so I use the "fn" key for sound etc?
Do the following:
1. Fire up System Preferences
2. Select Keyboard & Mouse
3. Select the Keyboard tab.
4. Tick the "Use all F1, F2, etc. keys as standard function keys" box.
That's it. You have now reversed the default use of the function keys. If you need to increase/decrease sound, brightness etc then press 'fn' plus the appropriate function key.
Kryten

UIX/JSP - How to use the UIX Controller with UIX/JSP

After reading the UIX Developers Guide I am under the impression that I could use the UIX Controller with UIX/JSP pages. Is this correct and are there any available examples?
Bill G...

It's correct, but I'm afraid we don't have much (read as "any")
documentation on how to do that - besides reading through the
gobs of Javadoc and guessing how to put it together.
Half of the problem is solved by registering JspPageDescriptions
on a PageBroker (e.g., UIXPageBroker) to tell the UIX Controller
to use a JSP to render a particular page, instead of a UIX XML
document.
The other half is getting the JSP to send requests back to
the UIX Controller. Depending on how you've chosen to name
your pages, create either a DefaultPageEncoder or ExtensionPageEncoder
inside your JSP, and use that to create destination URLs.

How to use the crypto api with gemalto cyberflex 32k ?

Hello ,
I've done many javacard programs using this method :
_compilation with javacard kit 2.2.1
_convertion into ".cap" with the javacard kit 2.1.2
All this programs work fine with this method : helloworld, read, write in the card, ....
But when i want to use the crypto api, i can't charge the program in the card (just by adding 2 lines for generating keys):
----------> returns 0x80206A80 (6A80: Wrong data / Incorrect values i data.)
I think it's because i use the 2.1.2 version , but if i use the 2.2.1 to convert , it's another error and no program work with this method.....even helloworld doesn't work...
-----------> returns 0x80206985 (6985: Command not allowed - Conditions of use not satisfied.)
I thing i must change my gpshel command , but i have read many forums but can't find the configuration for my card cyberflex 32k, some people had similar problems so they used the kit 2.1.2 combined with 2.2.1 like me, but i think they can't use the crypto api with this.........
Any help will be apreciated,
kind regards
Franck
Edited by: jojo85 on Mar 20, 2009 11:03 AM

Hello,
Thanks Sonnyyu,
I deleted my gpshell 1.4.2 directory and i installed gpshell 1.4.0 instead like they said , to avoid some bugs
i've tested the exemple CardEdgeII.ijc ,
here's what i got:
mode_201
enable_trace
establish_context
card_connect -readerNumber 1
select -AID a0000000030000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f
delete -AID A0000003230101
delete -AID A00000032301
delete -AID A00000000101
delete -AID A000000001mode_201
enable_trace
establish_context
card_connect -readerNumber 1
select -AID a0000000030000
Command --> 00A4040007A0000000030000
Wrapped command --> 00A4040007A0000000030000
Response <-- 6F188407A0000000030000A50D9F6E060011020201009F6501FF9000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f
Command --> 8050000008674672AE4B85E01800
Wrapped command --> 8050000008674672AE4B85E01800
Response <-- 000081410002B2C600E4010151982BB4CF843B1431E57DB6418652AE9000
Command --> 848201001073CF9B92B3F11E10BE12D1318E9A8095
Wrapped command --> 848201001073CF9B92B3F11E10BE12D1318E9A8095
Response <-- 9000
delete -AID A0000003230101
Command --> 80E40000094F07A000000323010100
Wrapped command --> 84E40000114F07A000000323010149D51E784E07966B00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID A00000032301
Command --> 80E40000084F06A0000003230100
Wrapped command --> 84E40000104F06A00000032301E3788AF4A9E32C2100
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID A00000000101
Command --> 80E40000084F06A0000000010100
Wrapped command --> 84E40000104F06A00000000101C3CC96E6E54AF0ED00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID A000000001
Command --> 80E40000074F05A00000000100
Wrapped command --> 84E400000F4F05A000000001DA73D168B218692C00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
install -file CardEdgeII.ijc -nvDataLimit 12000 -instParam 00 -priv 2
install -file CardEdgeII.ijc -nvDataLimit 12000 -instParam 00 -priv 2
Command --> 80E602001705A00000000107A00000000300000006EF04C60231000000
Wrapped command --> 84E602001F05A00000000107A00000000300000006EF04C60231000019F52839EB52A80200
Response <-- 009000
Command --> 80E80000EFC48230F401000FDECAFFED010204000105A00000000102001F000F001F000A00290256006C2307000A04230000067F00060000000004010004002904000107A0000000620101010107A0000000620102010107A0000000620201000107A000000062000103000A0106A0000000010119CE06006C00800313000C040400051856FFFF1BA41A2A17FB1818183718A61971008300020001011100001E4F1EC51F771F9A1FA71FAC1FB31FBC1FCD1FF41FFD20082043204B205520662071008300030001010D0000209520B520C520D52101211C21742196221F2230226F227D22E1072307000640188C00861803880010
Wrapped command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
Response <-- 9000
Command --> 80E80001EF08900B7F001C7B001C03104D387B001C041075387B001C051073387B001C061063387B001C07106C387B001C081065387B001C10061030387B001C1007103038187B001C037B001C925B8C004D6108119CFF8D005318100891008087011810089100808702AD02038F00803D0610108C002037AD020324940000807B001C037B001C925B8B002A7A05361A0525321A062529071F62071F10086C08119C108D00531607610EAD021F24940000802804700CAD011F2494000080280415046708119C108D0053031A07258D002E2905198B003016056A081167008D00531605076D08119C0F8D00531A08252906160504
Wrapped command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
Response <-- 9000
°
°
°
there are again many lines and the response is always 9000
i'll try to find a converter to convert the .cap files of my crypto application into .ijc files
thanks,
kind regards
Franck
Edited by: jojo85 on Mar 21, 2009 2:48 PM

How to use the Bloggie camera with Apple iMovie software.

Solved!
Go to Solution.

Follow these steps to use the Bloggie® camera with the Apple® iMovie® program.
Power on the camera and connect directly to a USB port on the computer.
Once the camera is detected by your computer, the iMovie software should open automatically. If the iMovie software does not open automatically, go to the Applicationsfolder and open it from there.
In the iMovie window, choose Import from Camera...
Choose which clips you want to import and choose the Done button or choose the Import All...button to import all the clips.
NOTE: You can use the standard iMovie interface to edit and create movies from your video taken with the camera. For more information about how to use the iMovie program, refer to the Help menu in iMovie or visit http://www.apple.com/support/imovie.

How to use the distinct key in formula field in SAP Crystal Reports

I want to use the distinct key in formula field in SAP Crystal reports.
When i'm using it shows an error.
Please suggest me....

Hi,
Use DistinctCount keyword directly for your calculation instead of count(distinct(....
Alternatively, if you want to avoid duplicate records, under "File" > "Report Options" make the 'Select Distinct Records' as True.
Thanks,
Raghavendra

How to use the JE database with other data types than byte arrays?

Hi! I searched the javadoc of Berkley DB JE, for a way to introduce entry (but I need also retrieve) data with other type than byte arrays, e.g. String, or anything else, as int may be, etc.
Still, I didn't find any such way, because the main (only?!) method to entry data into an open database - according what I found in javadoc - is:
"public OperationStatus put(Transaction txn, DatabaseEntry key, DatabaseEntry data) throws DatabaseException"
and both this and the corresponding method for retrieves, are based on the same DatabaseEntry type, which allow only entry data on byte[] support.
What if I need to use Strings or int, or even char? I must do a special conversion from these types, to byte[], to use the database?
Thank you!

On the doc page (this is also in the download package),
http://download.oracle.com/docs/cd/E17277_02/html/index.html
see:
Getting Started Guide
Java Collections Tutorial
Direct Persistence Layer (DPL)
All of these describe how to use data types other than byte arrays.
--mark

How to use the class CL_PT_EMPLOYEE with GET PERNR?

Hi,
I saw this sample code on the forum.
Is it more performant than using the "RP-PROVIDE-..." macros?
Does the employee instance needs to be killed after each pass? How does it affects memory?
start-of-selection.
GET pernr.
<b>* Create employee instance</b>
gif_employee = cl_pt_employee=>get_employee( pernr ).
go_employee ?= gif_employee.
<b>* Append all other required infotypes to itab</b>
APPEND '0003' TO gt_infotypes.
CALL METHOD go_employee->get_infotypes
    EXPORTING
      i_itlist      = gt_infotypes
      i_fromdate    = id_fromdate " start date
      i_todate      = id_todate    " end date
*      I_FILTER      =
      i_noauthcheck = 'X'
    IMPORTING
      e_result      = gt_infty_request
      e_retcd       = gd_retcd.

I think it that way. You are trying to compare and analyse old (don't say bad) programming school with a new (OO one) approach. Although, I am OO enthusiast and in any case I will try to convice you that OO aproach is better than classical one, you should know what SE30 was designed for. If you want to stress on OO design, use the one you mentioned, otherwise stick what SAP recommmends (please note, that I am "middle" school pupil, so I tried to learn all courses with my own experience and feelings from OO).
IMHO, OO aproach is a way of thinking, not something we can messure in sec. and compare to old school teaching. Some of your report should be desinged in classical way, some should be pure OO. Which one you choose, is up to you, your conclusions, your percives of ABAP language. For me OO was not injected in ABAP enough, to affect developers or to convince them using it in any case w/o doubts you have.
Regards
Marcin

Don't know how to use the air print with my ipads.

i just bought an mg3222 printer and i don't know how to figure out how to use air print with my ipad and ipad minis. Can anybody help??? Thanks

Hello.
In order to use the printer with your iOS devices, please make sure that the units are all connected to the same WI-Fi router. Once this has been done you should be able to print.
The initial Wi-Fi setup of the MG3222 would have to be done from a compatible Windows or Mac OSX computer.
If additional assistance is needed, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to use the pid vis with a two-state output

Hello
Could someone tell me how to regulate the temperature of a room with
a two-state heater (on/off), using the pid vi's.
Thanks,

>> Could someone tell me how to regulate the temperature of a room
>> with a two-state heater (on/off), using the pid vi's.
In <[email protected]> [email protected] (Helmut Hullen) writes:
>You don't need the PID. A simple 2-state control does the work.
^^^^^^ ^^^^^^^ ^^^^^^^
Frankly, I tend to agree. However, if you _need_ PID control and _if_
your two-state heater is solid-state switched, there are other
options. For example, commerical PID temperature controllers with
zero-voltage switching (ZVS) operate by generating a slow enabling
pulse, then achieving proportional control by varying the duty cycle of
this enabling pulse. For instanance, if your enabling pulse is running
at 10-Hz, with 50% duty cycle,
then your heating element will be on for
50% of the time every 0.1 second.
You can use a programmable timer (National includes two on their MIO
cards) to program the 5 or 10 Hz output and its duty cycle. You might
have LabView execute the PID subVI once every two or three seconds to
adjust the duty cycle on the programmable timer so as to minimize the
feedback error=(tempSetPoint-currentTemp).
Why are you wanting to use LabView for PID temperature control in the
first place? There are some very good PID temperature controllers
(programmable through a serial port) with built-in solid-state ZVSs
and readouts for $900 that you can buy. They'll fit right into
a control panel, display and all. Sure beats messing with a
programmable timer card and its outputs, plus you get a digital panel
readout to boot.
/\ Mark M Mehl, alias Superticker (Supertickler to some)
<><> Internet: [email protected]
\/ Preferred UUCP: uunet!iastate.edu!mehl
Disclaimer: You got to be kidding; who would w
ant to claim anything I said?

How to use the bootp_enabled key with dscl command create

Similar Messages

Maybe you are looking for