How to use the crypto api with gemalto cyberflex 32k ?

Hello ,
I've done many javacard programs using this method :
_compilation with javacard kit 2.2.1
_convertion into ".cap" with the javacard kit 2.1.2
All this programs work fine with this method : helloworld, read, write in the card, ....
But when i want to use the crypto api, i can't charge the program in the card (just by adding 2 lines for generating keys):
----------> returns 0x80206A80 (6A80: Wrong data / Incorrect values i data.)
I think it's because i use the 2.1.2 version , but if i use the 2.2.1 to convert , it's another error and no program work with this method.....even helloworld doesn't work...
-----------> returns 0x80206985 (6985: Command not allowed - Conditions of use not satisfied.)
I thing i must change my gpshel command , but i have read many forums but can't find the configuration for my card cyberflex 32k, some people had similar problems so they used the kit 2.1.2 combined with 2.2.1 like me, but i think they can't use the crypto api with this.........
Any help will be apreciated,
kind regards
Franck
Edited by: jojo85 on Mar 20, 2009 11:03 AM

Hello,
Thanks Sonnyyu,
I deleted my gpshell 1.4.2 directory and i installed gpshell 1.4.0 instead like they said , to avoid some bugs
i've tested the exemple CardEdgeII.ijc ,
here's what i got:
mode_201
enable_trace
establish_context
card_connect -readerNumber 1
select -AID a0000000030000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f
delete -AID A0000003230101
delete -AID A00000032301
delete -AID A00000000101
delete -AID A000000001mode_201
enable_trace
establish_context
card_connect -readerNumber 1
select -AID a0000000030000
Command --> 00A4040007A0000000030000
Wrapped command --> 00A4040007A0000000030000
Response <-- 6F188407A0000000030000A50D9F6E060011020201009F6501FF9000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f
Command --> 8050000008674672AE4B85E01800
Wrapped command --> 8050000008674672AE4B85E01800
Response <-- 000081410002B2C600E4010151982BB4CF843B1431E57DB6418652AE9000
Command --> 848201001073CF9B92B3F11E10BE12D1318E9A8095
Wrapped command --> 848201001073CF9B92B3F11E10BE12D1318E9A8095
Response <-- 9000
delete -AID A0000003230101
Command --> 80E40000094F07A000000323010100
Wrapped command --> 84E40000114F07A000000323010149D51E784E07966B00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID A00000032301
Command --> 80E40000084F06A0000003230100
Wrapped command --> 84E40000104F06A00000032301E3788AF4A9E32C2100
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID A00000000101
Command --> 80E40000084F06A0000000010100
Wrapped command --> 84E40000104F06A00000000101C3CC96E6E54AF0ED00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID A000000001
Command --> 80E40000074F05A00000000100
Wrapped command --> 84E400000F4F05A000000001DA73D168B218692C00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
install -file CardEdgeII.ijc -nvDataLimit 12000 -instParam 00 -priv 2
install -file CardEdgeII.ijc -nvDataLimit 12000 -instParam 00 -priv 2
Command --> 80E602001705A00000000107A00000000300000006EF04C60231000000
Wrapped command --> 84E602001F05A00000000107A00000000300000006EF04C60231000019F52839EB52A80200
Response <-- 009000
Command --> 80E80000EFC48230F401000FDECAFFED010204000105A00000000102001F000F001F000A00290256006C2307000A04230000067F00060000000004010004002904000107A0000000620101010107A0000000620102010107A0000000620201000107A000000062000103000A0106A0000000010119CE06006C00800313000C040400051856FFFF1BA41A2A17FB1818183718A61971008300020001011100001E4F1EC51F771F9A1FA71FAC1FB31FBC1FCD1FF41FFD20082043204B205520662071008300030001010D0000209520B520C520D52101211C21742196221F2230226F227D22E1072307000640188C00861803880010
Wrapped command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
Response <-- 9000
Command --> 80E80001EF08900B7F001C7B001C03104D387B001C041075387B001C051073387B001C061063387B001C07106C387B001C081065387B001C10061030387B001C1007103038187B001C037B001C925B8C004D6108119CFF8D005318100891008087011810089100808702AD02038F00803D0610108C002037AD020324940000807B001C037B001C925B8B002A7A05361A0525321A062529071F62071F10086C08119C108D00531607610EAD021F24940000802804700CAD011F2494000080280415046708119C108D0053031A07258D002E2905198B003016056A081167008D00531605076D08119C0F8D00531A08252906160504
Wrapped command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
Response <-- 9000
°
°
°
there are again many lines and the response is always 9000
i'll try to find a converter to convert the .cap files of my crypto application into .ijc files
thanks,
kind regards
Franck
Edited by: jojo85 on Mar 21, 2009 2:48 PM

Similar Messages

How to use the class CL_CTMENU with the method DISABLE_FUNCTIONS

Hi Friends,
How to de-activate some functions in the Menu bar?
Eg: - Sales document
             Create
             Change
             Display
I want to de-activate "Change"
In other words: - How to use the class CL_CTMENU with the method DISABLE_FUNCTIONS in my program.
Regards,
Hari
Edited by: Bhatlapenumarthy Hari Krishna on Jun 9, 2008 5:22 PM

Krishna,
It is not possible to deactivate the CHANGE option in themenu bar using the method disable_functions of cass CL_CTMENU. This method allows you to deactivate only the function codes of the CONTEXT MENU, which is available only when u press the left mouse button.
U can use the SET PF-STATUS 'XXX' EXCLUDING fcodes option to disable the CHANGE.
*****Reward points if useful
Regards,
Kiran Bobbala

How to use the windows API GetCaretPos with FireFox? It works with IE

I want to get caret position from a windows desktop application using the Windows API GetCaretPos. It works in any windows Application and in IE. It worked also in FireFox for some minutes in version 3.6.8 but than it stopped working. Can anyone tell me how to make it work?
== This happened ==
Every time Firefox opened

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Did this fix your problems? Please report back to us!

How to use the UME api in order to search the LDAP?

Hello,
I have an application which connects to the LDAP the portal is connecting to and search users according to a certain search criteria.
Here is the relevant piece of code:
Hashtable env = new Hashtable();
DirContext ctx = new InitialDirContext(env);
SearchControls controls = new SearchControls();
String filter = "firstName=..."
NamingEnumeration results = ctx.search("OU=OUs", filter, controls);
I would like to do this same search using the UME API.
Can someone please show me the equivalent code to it using the UME API?

Hi Roy,
you find the Configuration File you are using in your portal via System Administration -> System Configuration -> UM Configuration -> Data Sources
or in sapume.properties where you can find
##xml file that configures the persistence except roles
ume.persistence.data_source_configuration=YOUR_DATASOURCE_CONFIG_FILE.xml
In this xml file, there is the entry
<principal type="user">:
<principal type="user">
     <nameSpaces>
     <nameSpace name="com.sap.security.core.usermanagement">
<attributes>
<attribute name="firstname" populateInitially="true"/><attribute name="displayname" populateInitially="true"/>               <attribute name="lastname" populateInitially="true"/>                    <attribute name="fax"/>                         <attribute name="email"/>                    <attribute name="title"/>               <attribute name="department"/>                    <attribute name="extensionAttribute2"/>               <attribute name="mobile"/>          <attribute name="telephone"/>                    <attribute name="streetaddress"/>               <attribute name="pobox"/>                    <attribute name="location"/>               <attribute name="telephoneShort"/>               </attributes>
     </nameSpace>
     <nameSpace name="com.sap.security.core.usermanagement.relation">
     <attributes>
     <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE"/>
     </attributes>
     </nameSpace>
    </nameSpaces>
</principal>
According to your company LDAP attributes, you will have to extend the above attributes, telephoneShort for example is an attribute within our company.
The UME API does the rest.
All you have to do, is request the right attribute (in my above example it was the last name).
(Sorry for the format, but it is quite cumbersome to format it properly with the available editor )
Kind regards,
Rebecca

UIX/JSP - How to use the UIX Controller with UIX/JSP

After reading the UIX Developers Guide I am under the impression that I could use the UIX Controller with UIX/JSP pages. Is this correct and are there any available examples?
Bill G...

It's correct, but I'm afraid we don't have much (read as "any")
documentation on how to do that - besides reading through the
gobs of Javadoc and guessing how to put it together.
Half of the problem is solved by registering JspPageDescriptions
on a PageBroker (e.g., UIXPageBroker) to tell the UIX Controller
to use a JSP to render a particular page, instead of a UIX XML
document.
The other half is getting the JSP to send requests back to
the UIX Controller. Depending on how you've chosen to name
your pages, create either a DefaultPageEncoder or ExtensionPageEncoder
inside your JSP, and use that to create destination URLs.

How to use the Bloggie camera with Apple iMovie software.

Solved!
Go to Solution.

Follow these steps to use the Bloggie® camera with the Apple® iMovie® program.
Power on the camera and connect directly to a USB port on the computer.
Once the camera is detected by your computer, the iMovie software should open automatically. If the iMovie software does not open automatically, go to the Applicationsfolder and open it from there.
In the iMovie window, choose Import from Camera...
Choose which clips you want to import and choose the Done button or choose the Import All...button to import all the clips.
NOTE: You can use the standard iMovie interface to edit and create movies from your video taken with the camera. For more information about how to use the iMovie program, refer to the Help menu in iMovie or visit http://www.apple.com/support/imovie.

How to use the Worklist API from Java (classpath ??)

Hi all,
Sorry for a novice question but I couldn't find the way to go about this (probably because it's such common knowldge...)
I would like to try and use the Worklist API from my Java code in Eclipse, and according to the BPEL dev-guide I need to add an Import command for oracle.tip.pc.api.worklist. Where do I find these classes ?????
I guess I need to change my CLASSPATH but I couldn't find a single word about this in the BPEL dev-guide (chapter 17), BPEL installation guide or elseware.
thanks.

Hi all,
Ok now.
To summarize - I was trying the code from BPEL developer guide, chapter 17, page 40 for using the Worklist local API's.
Only after adding the following JAR's to the build path, was I able to compile it:
orabpel-common.jar
orabpel.jar
bpm-infra.jar
bpm-services.jar
So, these 4 JAR's are required for using the Worklist local API's (not a clue in the dev guide itself for this requirement though...)
Thank you very much for your help,
assaf.

How to use third party APIs with Sun J2ME Toolkit

I've installed Sun J2ME Toolkit 2.1. If I intend to use other third party APIs with my existing toolkit, how do I do that. I can manage to get the jar file of the associated API classes, but how to integrate the same with the toolkit. Thanks in advance to all who support.

if I remember right, it is enough, if you put the .jar of the api in the lib/ directory of your project (<WTK>/apps/<yourProject>/lib/ )
hth
Kay

How to use the RequestService API to create request in OIM 11g

Hi Guys,
We are trying to build a custom ADF app (Request Forms) to allow users to request access to resources. We want to use the OIM RequestService APIs (oracle.iam.request.api.RequestService).
We can't seem to find a proper guide to use this service.
Is there anyone who has done this or know how we can achieve this in OIM 11g?
Thanks in advance
Tav

Try here
http://java.net/projects/openptk/sources/svn/show/branches/Oracle/OIM11g/examples/java?rev=1313
Fred

How to use the class CL_PT_EMPLOYEE with GET PERNR?

Hi,
I saw this sample code on the forum.
Is it more performant than using the "RP-PROVIDE-..." macros?
Does the employee instance needs to be killed after each pass? How does it affects memory?
start-of-selection.
GET pernr.
<b>* Create employee instance</b>
gif_employee = cl_pt_employee=>get_employee( pernr ).
go_employee ?= gif_employee.
<b>* Append all other required infotypes to itab</b>
APPEND '0003' TO gt_infotypes.
CALL METHOD go_employee->get_infotypes
    EXPORTING
      i_itlist      = gt_infotypes
      i_fromdate    = id_fromdate " start date
      i_todate      = id_todate    " end date
*      I_FILTER      =
      i_noauthcheck = 'X'
    IMPORTING
      e_result      = gt_infty_request
      e_retcd       = gd_retcd.

I think it that way. You are trying to compare and analyse old (don't say bad) programming school with a new (OO one) approach. Although, I am OO enthusiast and in any case I will try to convice you that OO aproach is better than classical one, you should know what SE30 was designed for. If you want to stress on OO design, use the one you mentioned, otherwise stick what SAP recommmends (please note, that I am "middle" school pupil, so I tried to learn all courses with my own experience and feelings from OO).
IMHO, OO aproach is a way of thinking, not something we can messure in sec. and compare to old school teaching. Some of your report should be desinged in classical way, some should be pure OO. Which one you choose, is up to you, your conclusions, your percives of ABAP language. For me OO was not injected in ABAP enough, to affect developers or to convince them using it in any case w/o doubts you have.
Regards
Marcin

How to use the COMM API in a JAR file

I have developed an application, using the NetBeans IDE, to communicate with a modem over the COM1 serial port using the Java Comm API. The application works fine within the IDE, but when a JAR file is created and "double-clicked", the application launches correctly, but when the code is executed to "talk" over the COM1 serial port - nothing happens. No exceptions and no warnings are thrown. My environment is XP, SP1.
The manifest file is as follows:
Manifest-Version: 1.0
Class-Path: ../j2sdk1.4.2/jre/lib/ext/TimerBean.jar ../j2sdk1.4.2/jre/
lib/ext/AbsoluteLayout.jar ../j2sdk1.4.2/jre/lib/ext/comm.jar
Created-By: NetBeans IDE
Specified-By: Projects/TheApp/Files/TheApp.jarContent
Main-Class: Main
According to the Comm API installation instructions, the following files are copied:
copy comm.jar \j2sdk1.4.2\jre\lib\ext
copy wind32com.dll \j2sdk1.4.2\bin
copy javax.comm.properties \j2sdk1.4.2\jre\lib
I suspect it has something to do with the paths.
Any help would be greatly appreciated. Thanks.

Thanks for your input, but after trying what you suggested the problem still exists. I think your right to be suspicous of the javax.comm.properties file. The application, that worked in the IDE, exhibits the same behavoir as the JAR file if the javax.comm.properties file is removed from the ../jre/lib directory. In other words it compiles correctly in the IDE, but when executed, nothing happens when the code that "talks" to the serial port is run.
I've tried moving the javax.comm.properties file into the working directory. Also, the CLASSPATH and PATH system variables were modified to include the path to javax.comm.properties.
If you have anymore ideas, please let me know.
Thanks.

How to use the JE database with other data types than byte arrays?

Hi! I searched the javadoc of Berkley DB JE, for a way to introduce entry (but I need also retrieve) data with other type than byte arrays, e.g. String, or anything else, as int may be, etc.
Still, I didn't find any such way, because the main (only?!) method to entry data into an open database - according what I found in javadoc - is:
"public OperationStatus put(Transaction txn, DatabaseEntry key, DatabaseEntry data) throws DatabaseException"
and both this and the corresponding method for retrieves, are based on the same DatabaseEntry type, which allow only entry data on byte[] support.
What if I need to use Strings or int, or even char? I must do a special conversion from these types, to byte[], to use the database?
Thank you!

On the doc page (this is also in the download package),
http://download.oracle.com/docs/cd/E17277_02/html/index.html
see:
Getting Started Guide
Java Collections Tutorial
Direct Persistence Layer (DPL)
All of these describe how to use data types other than byte arrays.
--mark

Don't know how to use the air print with my ipads.

i just bought an mg3222 printer and i don't know how to figure out how to use air print with my ipad and ipad minis. Can anybody help??? Thanks

Hello.
In order to use the printer with your iOS devices, please make sure that the units are all connected to the same WI-Fi router. Once this has been done you should be able to print.
The initial Wi-Fi setup of the MG3222 would have to be done from a compatible Windows or Mac OSX computer.
If additional assistance is needed, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to use the pid vis with a two-state output

Hello
Could someone tell me how to regulate the temperature of a room with
a two-state heater (on/off), using the pid vi's.
Thanks,

>> Could someone tell me how to regulate the temperature of a room
>> with a two-state heater (on/off), using the pid vi's.
In <[email protected]> [email protected] (Helmut Hullen) writes:
>You don't need the PID. A simple 2-state control does the work.
^^^^^^ ^^^^^^^ ^^^^^^^
Frankly, I tend to agree. However, if you _need_ PID control and _if_
your two-state heater is solid-state switched, there are other
options. For example, commerical PID temperature controllers with
zero-voltage switching (ZVS) operate by generating a slow enabling
pulse, then achieving proportional control by varying the duty cycle of
this enabling pulse. For instanance, if your enabling pulse is running
at 10-Hz, with 50% duty cycle,
then your heating element will be on for
50% of the time every 0.1 second.
You can use a programmable timer (National includes two on their MIO
cards) to program the 5 or 10 Hz output and its duty cycle. You might
have LabView execute the PID subVI once every two or three seconds to
adjust the duty cycle on the programmable timer so as to minimize the
feedback error=(tempSetPoint-currentTemp).
Why are you wanting to use LabView for PID temperature control in the
first place? There are some very good PID temperature controllers
(programmable through a serial port) with built-in solid-state ZVSs
and readouts for $900 that you can buy. They'll fit right into
a control panel, display and all. Sure beats messing with a
programmable timer card and its outputs, plus you get a digital panel
readout to boot.
/\ Mark M Mehl, alias Superticker (Supertickler to some)
<><> Internet: [email protected]
\/ Preferred UUCP: uunet!iastate.edu!mehl
Disclaimer: You got to be kidding; who would w
ant to claim anything I said?

How to use the Camileo H30 with Power Supply

Hello
First: excuse my english, im from germany ;)
I have a Camilio H30. its was boughted used. I only got the camcorder & the original battery.
no extras (like usb cable or original power supply)
what i want: i need to film over some hours. The Battery cant make it. so i wanna use it with a power supply but when i put it in (throughh the mini usb a connector) the camcorder goes to charing mode (no actions are possible) but i want to use it fully functionality when power supply is connected.
how do i handle it ??
i got a power supply with 5V an 2,25A , i think its enough... or not??
The Label on the bottum side from the camcorder tells me 5V 2A....
Thanks 4 helping me :D
greetz

oh ok i thought this is possible because in the main manual at the part when the display icons being explaind they show a full, half-full, emtpy- battery and a power connector icon. they call it "gleichstrommodus" sorry i have only the german manual. in english it should be co-corent flow mode or ac power mode.
im looking for a way to make the cam work with power supply only. i dont want to charge or even use the battery because i film over few hours ago and for that i dont need it.
my old dv cam works when the battery was plugged out with ac adapter only. thats very nice for me.
whatever. if this is not possible i sell this cam and buy another one ;)
thanks for your help !

How to use the crypto api with gemalto cyberflex 32k ?

Similar Messages

Maybe you are looking for