How to use the filter facet on af:column

I have a column in my VO that is defined as a boolean and that shows as a selectBooleanCheckbox in my table. My table has filters on but above the boolean column it shows a regular input field.
I checked the filter facet and i also put a selectBooleanCheckbox in it but i don't know how to set the values so the data will be filtered when the value of the checkbox changes.
<f:facet name="filter">
<af:selectBooleanCheckbox id="cbFilt"/>
</f:facet>

For an example that uses a selectOneChoice, easily adaptable to a selectBooleanCheckbox solution, please see:
Re: how create selectOneChoice in filter facet of af:column _ jdeveloper11g.
Regards,
Matthew

Similar Messages

Where to locate and how to use the filter thershould to binarized image

Good morning friends. I am using
Labview with VDM and let me know where to locate and how to use the
filter thershould. Also that parameters used to binarized image captured
via webcam and display it in black and white.
Thank you very
much.

Is the image that you are getting a RGB one? Use color plane extraction and then use a binary threshold to convert it into a binary image. You can also directly use a color threshold and convert a rgb (color) image to a binary image.

How to use the same function in a column so it varies from row to row.

In a spreadsheet, I have four columns: item, quantity, price, total cost.
How can I write a function (product) for the entire "total cost" column that automatically will place the correct "total cost" for the item in that row; i.e.: =product(quantity,price)
This would save time by writing one function for the entire column so that the function would not have to be written for each row.
Thanks for your help.

Question asked and responded several times.
If quantity is in column C and price in column D,
the common soluce is to use the formula:
=C2*D2 in E2
then use the fill down tool which will automatically create the formulas
=C3*D3
=C4*D4
As I am a lazy guy, I use a shorter formula:
=C*D
and fill down reproduce it as is in the other cells.
In fact I use
=ROUND(C*D,2)
Yvan KOENIG (from FRANCE samedi 4 juillet 2009 11:31:06)

How to use the prompted value in the filter expression

Hi
Is it possible to use the prompted value in the filter expression?
My requirement is that user will be prompted for a date field and I need to filter the records such that the records are displayed for the last 5 weeks from the date entered by the user.
If somehow I know how to use the prompted value in the filter expression then this requirement is easy to be done. If this is possible, please guide me?
If there are other ways to acheive the desired results then please suggest.
Thanks
-Jaz

Edit: example added
SQL> create table tb_test
2 ( id number(5)
3 , tot number(5)
4 , mon_tot number generated always as (tot*15) virtual
5 );
Table created.
SQL> insert into tb_test (id, tot) values (1, 5);
1 row created.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1          5         75
1 row selected.
SQL> update tb_test
2 set    tot = 15
3 where id = 1;
1 row updated.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1         15        225
1 row selected.

How to use the Columns Hidden | space in the bottom of af:panelCollection?

Hi,experts,
In jdev 11.1.2.3,
I can see a row of Columns Hidden | Columns Frozen in the bottom of component af:panelCollection - pc1 which have an af:table - t1 component inside in designer view,
and can see there is a blank row space only with "|" inside when the page is running.
Now I want to use this blank row space such as to display row numbers for the table, so I set the property for the panelColletion as following source code:
==========================
<af:panelCollection id="pc1" inlineStyle="width:1250px; height:500px;">
<f:facet name="menus"/>
<f:facet name="toolbar"/>
<f:facet name="statusbar">
<af:group id="g4"/>
</f:facet>
<af:table value="#{bindings.TView1.collectionModel}" var="row"
rows="#{bindings.TView1.rangeSize}"
emptyText="#{bindings.TView1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.TView1.rangeSize}" rowBandingInterval="1"
filterModel="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}" filterVisible="false"
varStatus="vs"
selectedRowKeys="#{bindings.TView1.collectionModel.selectedRow}"
selectionListener="#{bindings.TView1.collectionModel.makeCurrent}"
rowSelection="single" id="t1" inlineStyle="font-size:xx-large; font-weight:bolder;">
<af:column sortProperty="#{bindings.TView1.hints.GoodsStatus3.name}" filterable="true"
sortable="true"
headerText="#{bindings.TView1.hints.GoodsStatus3.label}"
id="c42">
<af:outputText value="#{row.GoodsStatus3}" id="ot33"/>
</af:column>
<f:facet name="footer">
<af:group id="g3">
*<af:outputText value="RowsNumber：" id="ot44"/>*
*<af:outputText value="#{bindings.TView1Iterator.estimatedRowCount}"*
id="ot43" partialTriggers="::pc1:t1"/>
</af:group>
</f:facet><f:facet name="detailStamp"/>
</af:table>
</af:panelCollection>
=====================
but when run the page there is no display for the row number, instead on the bottom of the table, there is only a blank row with "|" inside.
How to use the Columns Hidden | Columns Frozen space in the bottom of component af:panelCollection ?
Thanks!

Hi, Arun
It works.
As in my use case, can draw an af:toolbar component into statusbar of Panel Collection facets in Structure view.
There is still a small issue:
cannot see the Columns Hidden|Columns Frozen component in the Structure view,
and if drop more than one af:toolbar into statusbar, the sencond one will fall/wrap into second row, even though there is enough space on the first row (to occupy a second row in statusbar will be a waste of space), and cannot see how to adjust.
Thank you very much!
bao

How to use the out parameter of a transformation

Hi All,
I have a requirement where I need to move all the transformations from process flows to map.SO for each transformation I need to have 1 map which calls this transformation.I have 1 transformation which has both input and output parameter.If I use this transformation in mapping then how to use the out parameter of thsi transformation.This out parameter needs to beused in other mappings.Can soemone please help me.
Thansk in advance

Hi,
I'm not quite sure what you are trying to do.
What works: Connect the outgroup of a pre- or post-mapping process operator to the mapping output parameter operator..
What does not work: Connect the outgroup of an operator that can return more than one row (e.g. table operator, filter, joiner ,...) to the mapping output parameter operator. The mapping output parameter just returns "one row", like a pl/sql function call.
You cannot pass a "data stream" from one mapping to another. Maybe the pluggable mappings is what you are looking for.
Regards,
Carsten.

Gantt chart: Don't know how to use the tooltipkeys and toolkeylabel

I have a problem. Don't know how to use the tooltipkeys and toolkeylabel. I used jquery to select the gantt bars and on mouse over i was getting the task id "tid" then passing it to adf bean with serverlistener and showing a popup that is adf component with javascript. For positioning of the popup I used a button that has width and height 0 and has position absolute and gets the coordinates of the mouse.
"div[et]" is a jquery selector that selects all the elements that have attribute et. I noticed that all the bars have that attribute as a few other attributes as well "part"...
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
        xmlns:dvt="http://xmlns.oracle.com/dss/adf/faces">
    <af:document title="untitled1.jsf" id="d1">
        <af:resource type="javascript" source="https://ajax.googleapis.com/ajax/libs/jquery/1.7.0/jquery.min.js"/>
        <af:resource type="javascript" source="resources/js/home.js"/>
        <af:messages id="m1"/>
        <af:form id="f1">
           <af:commandButton text="commandButton 1" id="cb1" inlineStyle="visibility:hidden; width:0; height:0" />
            <af:popup id="noteWindow" contentDelivery="lazyUncached" binding="#{homeBean.popup}">
                <af:noteWindow id="popupWindow">
                    <af:panelFormLayout id="pfl2">
                        <af:panelLabelAndMessage label="Task id" id="plam5">
                            <af:outputText value="#{homeBean.taskId1}" id="ot64"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="Start Location Name" id="plam6">
                            <af:outputText value="#{homeBean.startLocation}" id="ot7"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="Stop Location Name" id="plam7">
                            <af:outputText value="#{homeBean.stopLocation}" id="ot8"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="tasktype" id="pla2m7">
                            <af:outputText value="#{homeBean.taskType}" id="ot9"/>
                        </af:panelLabelAndMessage>
                    </af:panelFormLayout>
                </af:noteWindow>
            </af:popup>
            <af:serverListener type="jsServerListener" method="#{homeBean.serverEventHandler}"/>
            <dvt:schedulingGantt id="gantt1" value="#{bindings.PersonView1.schedulingGanttModel}" var="row"
                                 startTime="2011-07-04 00:00:00" endTime="2011-07-04 23:00:00" summary="gsg"
                                 showMenuBar="false" showToolbar="false" iconPlacement="left"
                                 showTasksAsDailyBar="false">
                <f:facet name="major">
                    <dvt:timeAxis scale="days" id="ta1"/>
                </f:facet>
                <f:facet name="minor">
                    <dvt:timeAxis scale="hours" id="ta2"/>
                </f:facet>
                <f:facet name="nodeStamp">
                    <af:column sortProperty="#{bindings.PersonView1.hints.PersonId.name}" sortable="false"
                               headerText="#{bindings.PersonView1.hints.PersonId.label}" id="c1">
                        <af:outputText value="#{row.PersonId}" id="ot1">
                            <af:convertNumber groupingUsed="false"
                                              pattern="#{bindings.PersonView1.hints.PersonId.format}"/>
                        </af:outputText>
                    </af:column>
                </f:facet>
            </dvt:schedulingGantt>
        </af:form>
    </af:document>
</f:view>javascript:
$(document).ready(bindEvents());
function bindEvents() {
    $("div[et]").live('mouseover', function (e) {
         $('#cb1').css("position", 'absolute');
         $('#cb1').css("top", e.pageY-4);
         $('#cb1').css("left", e.pageX);
        var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
        var element = AdfPage.PAGE.findComponent("f1");
        var taskIdToPass = null;
        if ($(this).attr("tid") !=undefined) {
             taskIdToPass = $(this).attr('tid').toString();
        } else {
            taskIdToPass = $(this).parent().attr('tid').toString();
        var param = {            taskId : taskIdToPass        };
        AdfCustomEvent.queue(element, "jsServerListener", param, true);
        if (!popup.isPopupVisible()) {
            var hints = {};
            hints[AdfRichPopup.HINT_LAUNCH_ID] = "cb1";
            hints[AdfRichPopup.HINT_ALIGN_ID] = "cb1";
            hints[AdfRichPopup.HINT_ALIGN] = AdfRichPopup.ALIGN_AFTER_START;
            popup.show(hints);
    }).live("mouseout", function () {
        var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
        popup.hide();
};My bean that is session bean:
package view;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCDataControl;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.render.ClientEvent;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import oracle.jbo.ViewObject;
public class HomeBean {
    private RichPopup popup;
    private String taskId1;
    private String startLocation;
    private String stopLocation;
    private long taskId;
    private String taskType;
    public HomeBean() {
        super();
    public void serverEventHandler(ClientEvent clientEvent) {
        String taskIdString = clientEvent.getParameters().get("taskId").toString();
        this.taskId = Long.parseLong(taskIdString);
        DCDataControl dc1 = BindingContext.getCurrent().findDataControl("AppModuleDataControl");
        ApplicationModule am = dc1.getApplicationModule();
        ViewObject vo = am.findViewObject("PdTrfDayView1");
        RowSetIterator rowSetIterator = vo.createRowSetIterator(null);
        Row[] rows = rowSetIterator.findByKey(new Key(new Object[] {taskId}), 1);
        Row row = rows[0];
       this.taskId1 = row.getAttribute("PdTrfDayId").toString();
       this.startLocation = row.getAttribute("StartLocation").toString();
       this.stopLocation = row.getAttribute("StopLocation").toString();
       this.taskType = row.getAttribute ("PdTrfTypeId").toString();
        RichPopup.PopupHints ph = new RichPopup.PopupHints();
        vo.closeRowSetIterator();
    public long getTaskId() {
        return taskId;
    public void setPopup(RichPopup popup) {
        this.popup = popup;
    public RichPopup getPopup() {
        return popup;
    public String getTaskId1() {
        return taskId1;
    public String getStartLocation() {
        return startLocation;
    public String getStopLocation() {
        return stopLocation;
    public String getTaskType() {
        return taskType;
}I am wondering If i can use setCurrentRow on the iterator that i create and use it for displaying on the popup instead of binding startLocation and stopLocation to the bean and if there is any benefit of that at all...
Edited by: 897833 on Nov 24, 2011 11:37 AM

Hi,
To use tooltipkeys and tooltiplabel in gantt, you can add following code in managed bean
public String[] getTooltipKeys()
return new String[]{"columnA", "columnB", "StartDate", "EndDate"};
public String[] getTooltipLabels()
return new String[]{"A", "B", "Start Date", "End Date"};
where , the string array in the ToolTipKeys represents the columns, of the table you have in the gantt component , and the string array in TooltipLabels displays the label you want to display for the table columns.
In the jsff, you could call the bean methods as follows:
tooltipKeys="#{GanttBean.tooltipKeys}"
tooltipKeyLabels="#{GanttBean.tooltipLabels}"

How to use Hierarchy Filter Selection?

Hi, experts !
Could anyone give me a detail for how to use hierarchy filter selection ?
When i locate a Hier filter selection in the template and execute it, a false info
accured while filtering data,and the IE inferred the hier node object was missing.
Then i add another hier filter in the same template, and the secend runs well, however the first one didn't.
At last, i hide the first one, but the second one can't either.
Help me !!!
Thx in advance!

Thanks Toja !
Sorry to reply so late !
The error is line: 51. error:'document.HIERARCHY_MENU_1.NODEID' is null or is not the object.
The code on line of 51 says:document.HIERARCHY_MENU_1.NODEID.value = i_node;
Could you please give me some documents on the topic of Hierarchy Filter Selection ?

How to Use and Filter Table contents after execution of Bapi

Can anybody guide me how to Use and Filter the table Contents which i got after successful execution of a Bapi
I used Component Controller in my Project
Ex: My table contains Redundant data for a single column but i want to display the column contents with out Redundancy
Name
Raghu
Raghu
Raghu
Debasish
Debasish
I want to filter the table contents and i want to display the table with out Redundancy
and Even when i am using a Dropdown i selected a Column from a Table as the values for that Dropdown but that table is having redundant data and the same data is getting displayed in that Dropdown i want the Dropdown to display data with out redundancy
Thanks

I also got that problem recently and after debuging for a while I figured out, that it was resulting from an error in my table's model: When the model received new items to display I
1.) Fired an delete event for the old items
2.) Fired an insert event for the new items
Problem was that when firing the delete event I didn't already assigned the new items to the model. Therefore it had still the old row count.
Maybe you have also a faulty table model?...

How to keep the filter when jump from one report to another report?

Hi experts,
How to use the "Link" or "Button Group" Web Item in BEx Web Application Designer to jump from one report A to another report B, both the filter of report A and report B could be kept and not missing.
When I use jump from report A to report B, the filter of Report B disappears.
But I need the filter of Report B to stay there and could be used.
Thanks
Alex

Hi..
I tried Your approached but I got an error as the field are connected to Entity Object and they are mandatory.
I achieved it using another way. Using " setForwardURL " method only.
As I am calling this method to delegate back to first page. This method takes 8 input parameters.
The 6 no parameter is about to retain AM or not. It a boolean type. Initially it was TRUE as soon as I changed it to False it worked as I needed. :)
Thanks and Regards,
Ajay

How we use the rights on LOV

Hi,
How we use the rights on LOV to filter.

What you need to do is to edit the LOV sql (assuming it is custom folder) and insert there some
kind of security mechanism.
Also you can create dependencies in the parameters so that if you will select on the "Region" parameter the value of "New York" when opening the values for "Departments" you will get only the relevant departments.
This can be done in the parameters definition, you can choose there to limit the results according to another condition. (note that it might create some performance issues)
Tamir

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

JNI - How to use the error reporting mechanism?

I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.

Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL;

How to use the t-code vf31 tor taking print out of invoice

Hi,
How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
venu

Hi,
Please find the steps
Output type                     RD00
Transmission medium             1
Sort order                      01
Processing mode                 1
Please give the oppropriate fields,
if the still error persists check the configuration in NACE transaction code.
thanks
Kuntla

How to use the filter facet on af:column

Similar Messages

Maybe you are looking for