How to use the Table Valueset in another Table Valuset

Hi Friends ,
I have one requirement let me explain you the scenario.
in one segment of the Keyflex filed i need to get the all the grades of the business. which i did using the table valueset.
now in another segment of the kff, i need to get all the grade steps depending on the selected grade.
like if i have a grades say G1,G2,G3,G4...........
and grade steps
for G1-steps(1,2,3,4,5,6)
for G2-steps(1,2,3,4)
for G3-steps(1,2,3)
for G4-(1,2,)
etc.
Now my requirement is if the user select the grade G1 from the valueset. then in the next filed of the segment should come only those steps which are valid for that grade.
i hope i have given clear pic of my requirement can anyone please help me out, how to proceed for this.
thanks in advance.

Well, I know what you're talking about, but this is something that is usually done in different ways depending on the front end interface being used.
Are you referring to Oracle Forms? Apex? .NET? Java? or what???
This forum is for SQL and PL/SQL questions, so doesn't relate to a particular interface. SQL and PL/SQL do not have key flex fields, so, either ask your question in the correct sub-forum or give us more details as to your requirements.

Similar Messages

How to call the Table Valueset in another Table Valueset

Hi Friends ,
I have one requirement let me explain you the scenario.
in one segment of the Keyflex filed i need to get the all the grades of the business. which i did using the table valueset.
now in another segment of the kff, i need to get all the grade steps depending on the selected grade.
like if i have a grades say G1,G2,G3,G4...........
and grade steps
for G1-steps(1,2,3,4,5,6)
for G2-steps(1,2,3,4)
for G3-steps(1,2,3)
for G4-(1,2,)
etc.
Now my requirement is if the user select the grade G1 from the valueset. then in the next filed of the segment should come only those steps which are valid for that grade.
i hope i have given clear pic of my requirement can anyone please help me out, how to proceed for this.
thanks in advance.

Hi Manoj,
Pls follow Metalink Note: How To Create Value Sets Where One Segment Is Dependent On The Previous Segment Selection? [ID 818624.1]
Regards,
Sujoy

How to use the :$PROFILE$ token in a table validation value set

Hi Community,
Let me explain the scenario.
We have a Flex Value Set (CLIENTES SERVICIO DIRECTO) with a table validation, included in the PO Headers DFF, which shows a LOV with the Ship-to addressfrom the customer which we want to serve the goods; i.e. we are acting as a commisionists and the supplier puts the goods in the Ship-to address of the customer.
This Flex Value Set, as I mentioned, have a table validation, with the following validation table information:
Table Application: Oracle Receivables
Table Name: RA_ADDRESSES_ALL a, RA_CUSTOMERS b
Table Columnns: b.CUSTOMER_NAME Varchar2(20), a.PARTY_LOCATION_ID Varchar2(20)
Where/Order By: a.CUSTOMER_ID = b.CUSTOMER_ID
Additional Columns: a.ADDRESS1 "Dirección"(20), a.CITY "Ciudad"(10)
If we translate this to a SQL code:
select a.address1,
a.city,
a.party_location_id,
b.customer_name
from ra_addresses_all a,
ra_customers b
where a.customer_id = b.customer_id
and b.customer_id = 6283 <--- This last condition clause is for narrowing the result to the interested customer.
This select retrive us two records; for the same customer, one of them for one organization_id (let's say 85) and one of them for the other organization_id (84).
What we are looking for and want is that the LOV, which actually display the two records, shows only the ship-to site of the customer that belongs to the organization_id which belongs the user who queries or creates the Purchase Order.
I.e. Suppose that we enter to Purchasing using the responsibility assigned to the Operating Unit or Organization_id 84. We want that theLOV only shows the Ship-to Site from the customer that belongs to the Operating Unit or Organization_id 84.
I believe that we can achieve this using the :$PROFILE$ token, but we do not know how.
Any ideas?
Thanks a lot for your answer.

Hi Rcana,
We have just test your suggestion and it works. We believe that the correc sentence was fnd_profile.get('profile_name'), but the value feature solve the problem. Thanks for your help.
Regards.

[HTML DB] How to use the existing database table?

[HTML DB] How to use the existing database table?
I installed Oracle 10g database in Computer A(Windows 2000), and I already create all the tables with data and the data size is about 300MB.
In Computer B(Windows 2000), I installed HTML DB 1.6.
How can I use /get the existing database table (in computer A) for HTML DB?
Could anyone help me on this? I am newbie and I need some detail instructions. or Where can I find the examples.....
Thanks

Well I guess if you wish to retain that architecture, i.e. HTMLDB on one machine and your data on another, you will have to establish database links to access the data. Oracle documentation will describe how to achieve that.

HT2492 How do I use the calculator widget in another window?

How do I use the calculator widget in another window? For ex: if I want to move the calculator to a window that shows prices of products on a web page. I used to be able to click on the calculator and use it in another window, before I upgraded to OSX. What am i doing wrong?

I think you have to bring it back up in widgets in a new window, you can set up a hot corner to make tis qciker

How to use the table maintenance events for validating the input entries..?

Hi,
I have created a Z table with 6 fields in which all are KEY fields. All are of CHAR type. I have created the Table Maintenance Generator for the same. While maintaining the entries in the table, even though I maintain a blank entry for a field it is saving the entry. But, I don't want that way. All the fields are mandatory in my table. One should enter all the fields. Otherwise it should not allow to save the entry. So, I think it can be done using the Table Maintenance Events. can someone tell me how to use the Table Maintenance Events. and which event to use for my reuqirement and what is the logic to be written.
Or Is there any other way to solve my problem.
Please share your inputs. Thanks in advance.
Best regards,
paddu.

In the table maintenance generator, Environment --> Modifications --> Events then a screen will be appear here,we need to create the Events.In the EVENTS screen, press new Entries, there give 01(Before Saving the Data in the Database) and give a name(This will become a PERFORM), then click the Editor pushbutton, this will be there at the right side of the entry, then a popup will be appear, you can create an include program, there inside of the include program write ur code.
Here is documentation for Event 01(Before Saving the Data in the Database )
Event 01: Before Saving the Data in the Database
Use
This event occurs before new, changed or deleted entries are written to the database. Other activities can be performed, for example:
hidden entry processing
fill hidden fields
flag data to be written to hidden tables after the database change.
To have the changes saved by the central maintenance dialog routines, SY-SUBRC must be set to 0 at the end of the routine.
Realization
This event has no standard routine. The following global data is available for the realization of the user routine:
internal table TOTAL
field symbols
field symbols <ACTION> and <ACTION_TEXT>
<STATUS>-UPD_FLAG
If internal table data are to be changed before saving, t he changes should be made in both the internal table TOTAL and in the internal table EXTRACT.
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM.
Regards,
Joy.

How to use the item of table(ms access) in pl/sql

I want to use oracle forms builer developer application with ms access database
I don't know how to use the item of table in the pl/sql;please help me !

MERGE INTO EmpDept Target
Using (SELECT E.Address,
e.Design,
e.EmailId,
e.EmpId,
e.Ename,
e.ManagerId,
e.Salary,
D.DeptId,
D.DeptName,
D.Location
FROM Employee E
INNER JOIN Dept D
ON E.DeptId = D.DeptId) AS Source (Address, Design, EmailId, EmpId, EName, ManagerId, Salary, DeptId, DeptName, Location)
ON Source.EmpId = Target.EmpId
WHEN NOT matched THEN
INSERT (Address,
Design,
EmailId,
EmpId,
Ename,
ManagerId,
Salary,
DeptId,
DeptName,
Location)
VALUES (Address,
Design,
EmailId,
EmpId,
EName,
ManagerId,
Salary,
DeptId,
DeptName,
Location)
WHEN matched THEN
UPDATE SET Address = Source.Address,
Design = Source.Design,
EmailId = Source.EmailId,
Ename = Source.Ename,
ManagerId = Source.ManagerId,
Salary = Source.Salary,
DeptId = Source.DeptId,
DeptName = Source.DeptName,
Location = Source.Location;

How To Replace the column data of one table to another table

Currently I'm Using Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production.
My Sample Data is,
create table emp1(ename varchar2(20),deptno number);
create table emp2(ename varchar2(20),deptno number);
emp1 Table Data:
ename deptno
Surendra 120
Chandra 180
Ram 190
Raj 170
emp2Table Sample Data:
ename deptno
xx 121
yy 181
zz 191
hh 171
So, My requirement is ,
How to repalce the ename data of emp1 table into ename of emp2 table .
My Requred OutPut like:
select * from emp2;
ename deptno
Surendra 121
Chandra 181
Ram 191
Raj 171
Note:-This is Only Sample data, Actually ,my table haiving more than 1mollions of records.So Performence wise the Query Or Procedure sholud be good.
Please Help me on this !!
Thanks in Adv!!

this ?
with t as
select 'Surendra' ename,120 deptno from dual
union all
select 'Chandra' ename,180 deptno from dual
union all
select 'Ram' ename,190 deptno from dual
union all
select 'Raj' ename,170 deptno from dual
),t1 as
select 'xx' ename,121 deptno from dual
union all
select 'yy' ename,181 deptno from dual
union all
select 'zz' ename,191 deptno from dual
union all
select 'hh' ename,171 deptno from dual
),t3 as
select ename,deptno+1 deptno from t
select t3.ename,t1.deptno from t1,t3 where t1.deptno=t3.deptno;
ENAME     DEPTNO
Surendra     121
Chandra     181
Ram     191
Raj     171

How do I reorganize my photos on iPad 2? I need to move (not copy) photos from one album to another. When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all a

How do I reorganize my photos on iPad 2? I need to move (not copy) photos from one album to another. When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums. Please help.

You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad

How to find the font and replace another font using javascript in illustrator?

Dear All,
how to find the font and replace another font using javascript [batch process] in illustrator?
i have 700 image file, it very deficult replace one by one.
regards,
.Suresh.S

Ask the creator of the file for a unprotected version.

How could I insert the deleted row into another table within a trigger?

Hi,
How could I insert the deleted row into another table within a trigger? The destination table has the same columns as the source table. Since the statements are in the trigger, it is not allowed to query the source table named 'test'. Thanks! The trigger is as follows, uncompleted:
CREATE TRIGGER delete_trigger
AFTER DELETE
ON test
FOR EACH ROW
BEGIN
-- How could I insert the deleted row into another table
END delete_trigger;
Message was edited by:
user569548

Hi,
I'm not sure what's wrong there.
I read the oracle docs about ANALYZE and ALL_TAB_COLUMNS, and did the following:
ANALYZE TABLE my_tab VALIDATE STRUCTURE; //went ok.
SELECT column_name
FROM all_tab_columns
WHERE table_name = 'my_tab'; //but no rows selected?
This topic might not be what this thread should be about. Here I posted a new thread:
How to get colum names of the newly created table?
Thanks.
Message was edited by:
user569548

Hi could you show or tell me how to unlock my iphone 5? I baught an iphone 6 plus and would like to use the iphone 5 with another carrier could anyone help me.

hi could you show or tell me how to unlock my iphone 5? I baught an iphone 6 plus and would like to use the iphone 5 with another carrier could anyone help me.

Ask the carrier it's locked to if they'll unlock it. Nobody else can.
(117723)

How to use the out parameter of a transformation

Hi All,
I have a requirement where I need to move all the transformations from process flows to map.SO for each transformation I need to have 1 map which calls this transformation.I have 1 transformation which has both input and output parameter.If I use this transformation in mapping then how to use the out parameter of thsi transformation.This out parameter needs to beused in other mappings.Can soemone please help me.
Thansk in advance

Hi,
I'm not quite sure what you are trying to do.
What works: Connect the outgroup of a pre- or post-mapping process operator to the mapping output parameter operator..
What does not work: Connect the outgroup of an operator that can return more than one row (e.g. table operator, filter, joiner ,...) to the mapping output parameter operator. The mapping output parameter just returns "one row", like a pl/sql function call.
You cannot pass a "data stream" from one mapping to another. Maybe the pluggable mappings is what you are looking for.
Regards,
Carsten.

What is the use for lock object and how to use the lock objects

Hi Guru's,
I am new to ABAP .Can you please clarify the that what is the use of lock object and how to use the loct object .what is use of the Deque & Enque function modules .

hi ,
below are some minfo about lock objects :
Lock Objects
These types of objects are used for locking the access to database records in table. This mechanism is used to enforce data integrity that is two users cannot update the same data at the same time. With lock objects you can lock table-field or whole table.
In a system where many users can access the same data, it becomes necessary to control the access to the data. In R/3 system this access control is built-in on database tables. Developers can also lock objects over table records.
To lock an object you need to call standard functions, which are automatically generated while defining the lock object in ABAP/4 dictionary. This locking system is independent of the locking mechanism used by the R/3 system. This mechanism also defines LUW i.e. Logical Unit of Work. Whenever an object is locked, either by in built locking mechanism or by function modules, it creates corresponding entry in global system table i.e. table is locked. The system automatically releases the lock at the end of transaction. The LUW starts when a lock entry is created in the system table and ends when the lock is released.
Creating Lock Objects
Lock object is an aggregated dictionary object and can be defined by using the following steps:
o From initial data dictionary screen, enter the name for the object, Click Lock object radiobutton and then click on Create. The system displays a dialog box for Maintain Lock Objects screen
o Enter short text as usual and the name for primary table.
-Save
-Select Tables option
From this screen you can:
Select secondary tables, if any, linked by foreign key relationship.
Fields for the lock objects. This option allows you to select fields for objects (R/3 system allows locking up to record level). Lock object argument are not selected by user but are imposed by the system and includes all the primary keys for the table.
1) Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
2) Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
3) Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
Also, last but not the least, locking the object is logical (locking with any enqueue ) .so, you have to use the lock object while trying to access from second program .
reward if helpful ,
Regards,
Ranjita

How to use the custom control ?

Hi Friends,
plz help to use of custom control in screen painter ?
and how to use the custom control ?
Thanking you.
Regards,
Subash.

HI,
Screen Elements
A screen can contain a wide variety of elements, either for displaying field contents, or for allowing the user to interact with the program (for example, filling out input fields or choosing pushbutton functions). You use the Screen Painter to arrange elements on the screen.
You can use the following elements:
·        Text fields
Display elements, which cannot be changed either by the user or by the ABAP program.
·        Input/output fields and templates
Used to display data from the ABAP program or for entering data on the screen. Linked to screen fields.
·        Dropdown list boxes
Special input/output fields that allow users to choose one entry from a fixed list of possible entries.
·        Checkbox elements
Special input/output fields that the user can either select (value X) or deselect (value SPACE). Checkbox elements can be linked with function codes.
·        Radio button elements
Special input/output fields that are combined into groups. Within a radio button group, only a single button can be selected at any one time. When the user selects one button, all of the others are automatically deselected. Radio button elements can be linked with function codes.
·        Pushbuttons
Elements on the screen that trigger the PAI event of the screen flow logic when chosen by the user. There is a function code attached to each pushbutton, which is passed to the ABAP program when it is chosen.
·        Frame
Pure display elements that group together elements on the screen, such as radio button groups.
·        Subscreens
Area on the screen in which you can place another screen.
·        Table controls
Tabular input/output fields.
·        Tabstrip controls
Areas on the screen in which you can switch between various pages.
·        Custom Controls
Areas on the screen in which you can display controls. Controls are software components of the presentation server.
·        Status icons
Display elements, indicating the status of the application program.
·        OK field
Every screen has a twenty-character OK_CODE field (also known as the function code field) that is not displayed directly on the screen. User actions that trigger the PAI event also place the corresponding function code into this field, from where it is passed to the ABAP program. You can also use the command field in the standard toolbar to enter the OK field. To be able to use the OK field, you need to assign a name to it.
All screen elements have a set of attributes, some of which are set automatically, others of which have to be specified in the Screen Painter. They determine things such as the layout of the screen elements on the screen. You can set the attributes of screen elements in the Screen Painter - either for a single element, or using the element list, which lists all of the elements belonging to the current screen. Some of the attributes that you set statically in the Screen Painter can be overwritten dynamically in the ABAP program.
with regards,
sowjanyagosala

How to use the Table Valueset in another Table Valuset

Similar Messages

Maybe you are looking for