How to use Toshiba Bluetooth USB adapter?

I bought a new Toshiba Bluetooth for my laptop but Windows Vista doesn't recognise and is saying that is not compatible. How do I sort this out?
Thank you

Hi
Can you please tell me which USB adapter you try to use? Please send the PAXXXX number.

Similar Messages

How to use Toshiba Bluetooth stack longer than 30 days on 3rd party computer

Sorry if this is back to basics.
I have a Dell Latitude 610 with Bluetooth built in and driver versions 3.03.
When I try to connect my Nokia via PC Suite it says the drivers are old version and should be 7.0plus.
How do I get updated drivers that last longer than 30 days?

Hi
You should check this Toshiba BT portal and the HowTO section:
http://aps2.toshiba-tro.de/bluetooth/?page=howto
There you can find this document:
http://aps2.toshiba-tro.de/kb0/FAQ81021V0000R01.htm
It says that you have to use the BT stack/driver from your notebook manufacturer!
Cheers

I have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this

i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks

sos1der wrote:
pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
sos1der wrote:
but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
That's an entirely different issue, unrelated to your iOS devices.

My Blu-Ray player has a USB input but it doesn't have an HDMI input. Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter? It would allow me to run the audio through my stereo. Thanks to all for your help.

My Blu-Ray player has a USB input but it doesn't have an HDMI input. Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter? It would allow me to run the audio through my stereo. Thanks to all for your help.

Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter?
If you can find such a thing. I really doubt that exists since USB is a data connector not a video connector.
would allow me to run the audio through my stereo.
That would depend on this adapter.

How to use IDOC and RFC adapter in 1 scenario?

We have AAA field and BBB field and we want to send AAA field to receiver sap system using IDOC adapter and BBB field to receiver sap system using RFC adapter. But how to use IDOC and RFC adapter in 1 scenario and how to map and what are the design and configuration objects we require to create?

To achieve this you have to use
Two Interface Determinations
Two Communication Channels (IDOC & RFC)
& Two Receiver Aggrements.
Use the Enhanced Interface determination and give your conditions there. Based on you condition your interface mapping will be triggered and data will be sent to IDOC & RFC respectively.

Can someone tell how to use the digital av adapter to hook up my iPod to the tv

Can someone tell me how to use the digital av adapter with my iPod to the tv

Per this YouTube discussion it appears it does not nsupport TV out, only mirroring
https://productforums.google.com/forum/#!searchin/youtube/tv$20out/youtube/wbm8v 35tbyg/ULbLJ3sAnVUJ

How to using a bluetooth

How to using a bluetooth i have to iPhone and i want switch music

Apple does nto support transfer of music, photos and other stuff via bluetooth....
You can find apps on the app store for transfer of files via bluetooth.

HT4106 How much current the lightning/USB adapter can supply to an USB device

I bought a caméra terminated with a USB cable.
I want to connect that camera to my ipad mini using lightning to USB adapter
sold by Apple.
What is the maximum current supplied by the ipad mini through this adapter.?
Tks
Michel

The lightning to USB camera adapter cable doesn't provide output power. It only transfers the pic files from the camera. The camera's battery provides the power to operate the camera during this operation.
The lightning to USB cable is used to charge the iPad and the charger is rated at 10 or 12Watts of 5V power. So this cable carries 2+ Amps.
Why are you concerned?
 Cheers, Tom

How To Use External Bluetooth Adapter?

My desk is about 15' from my Mac Mini (running 10.8.2). I'm using an Apple Bluetooth Keyboard and Magic Mouse. The keyboard works pretty well but the mouse is awful. It frequently drops the connection and is erratic most of the time when it is connected. Signal strength is low, varrying between -75 and -84 dBm according to the Connection RSSI graph in System Preferences. In hopes of improving the situation I got a USB extension cable and a USB Bluetooth dongle with the thought that I could find a location for the dongle that would give me better signal strength.
So far, I'm not seeing much – if any – improvement and I'm wondering if I'm actually using the external adapter. Does anybody know of a way to tell which adapter is being used? Of if this strategy will even work?

Hi
Can you please tell me which USB adapter you try to use? Please send the PAXXXX number.

How to use a bluetooth dongle instead of built-in BT?

Just got an "Ultra Long Range Industrial" bluetooth dongle (BTD Bluetooth Dongle BT-6610). I want to use it instead of the built-in bluetooth because it has a much longer range.
How do I disable the built in bluetooth and enable the BT-6610?
The dongle shows up:
USB Bus:
Host Controller Location:          Built-in USB
Host Controller Driver:          AppleUSBOHCI
PCI Device ID:          0x0aa7
PCI Revision ID:          0x00b1
PCI Vendor ID:          0x10de
Bus Number:          0x06
Bolutek BTD-6610:
Product ID:          0x0001
Vendor ID:          0x0a12 (Cambridge Silicon Radio Ltd.)
Version:          59.41
Speed:          Up to 12 Mb/sec
Manufacturer:          Bolutek Technology Co.,Ltd.
Location ID:          0x06200000
Current Available (mA):          500
Current Required (mA):          200
BRCM2046 Hub:
Product ID:          0x4500
Vendor ID:          0x0a5c (Broadcom Corp.)
Version:           1.00
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0x06100000
Current Available (mA):          500
Current Required (mA):          0
Bluetooth USB Host Controller:
Product ID:          0x8217
Vendor ID:          0x05ac (Apple Inc.)
Version:           1.80
Serial Number:          xxxxxxxxx
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0x06110000
Current Available (mA):          500
Current Required (mA):          0
Here are my bluetooth setting:
Apple Bluetooth Software Version:          2.4.0f1
Hardware Settings:
Address:          xx-xx-xx-xx-xx-xx
Manufacturer:          Cambridge Silicon Radio
Name:          billbarnes
Firmware Version:          5941
Bluetooth Power:          On
Discoverable:          No
Vendor ID:          0
Product ID:          0x1
HCI Version:          4 (0x4)
HCI Revision:          5941 (0x1735)
LMP Version:          4 (0x4)
LMP Subversion:          5941 (0x1735)
Device Type (Major):          Computer
Device Type (Complete):          Macintosh Portable
Composite Class Of Device:          3670284 (0x38010c)
Device Class (Major):          1 (0x1)
Device Class (Minor):          3 (0x3)
Service Class:          448 (0x1c0)
Requires Authentication:          No
Services:
Bluetooth File Transfer:
Folder other devices can browse:          ~/Public
Requires Authentication:          Yes
State:          Enabled
Bluetooth File Exchange:
Folder for accepted items:          ~/Downloads
Requires Authentication:          Yes
When other items are accepted:          Ask
When PIM items are accepted:          Ask
When receiving items:          Prompt for each file
State:          Enabled
Devices (Paired, Favorites, etc)
Manufacturer:          Cambridge Silicon Radio (0x3, 0x10db)
Incoming Serial Ports:
Serial Port 1:
Name:          Bluetooth-PDA-Sync
RFCOMM Channel:          3
Requires Authentication:          No
Outgoing Serial Ports:
Serial Port 1:
Address:
Name:          Bluetooth-Modem
RFCOMM Channel:          0
Requires Authentication:          No

Hi X42:
Your last paragraph intrigued me as I had the same impression:
I thought unlicensed BT devices were legally limited by the FCC to about 30 feet (3 meters)
Actually, 30 feet is 10 meters.
Anyway, I researched and found this as part of a Wikipedia item:
Bluetooth is a standard wire-replacement communications protocol primarily designed for low power consumption, with a short range (power-class-dependent, but effective ranges vary in practice; see table below) based on low-cost transceiver microchips in each device.[7] Because the devices use a radio (broadcast) communications system, they do not have to be in visual line of sight of each other, however a quasi optical wireless path must be viable.[2]
Class
Maximum Permitted Power
Range
(approximate)
mW
dBm
Class 1
100
20
~100 meters
Class 2
2.5
4
~10 meters
Class 3
1
0
~5 meter
The effective range varies due to propagation conditions, material coverage, production sample variations, antenna configurations and battery conditions. In most cases the effective range of class 2 devices is extended if they connect to a class 1 transceiver, compared to a pure class 2 network. This is accomplished by the higher sensitivity and transmission power of Class 1 devices.[8]
Apparently there are BT devices that will transmit about 300 feet. I did look at the FCC site, but quickly became confused in the technbabble.
Barry

D-Link Bluetooth USB Adapter DBT-120

Is this adapter still the "most" compatible USB adapter for the Mac Pro? I have it and it works great but the option for waking up the computer with devices attached to this adapter is unavailable. Do you have to have the pre-installed Apple Bluetooth module for this functionality?

On the D-Link question, yes probably so. BT is finally getting so common, you don't see many choices with 3rd party suppliers.
On the WAKE option, you'll need the real Apple hardware. I just went through the same thing myself on my Dual G5. The bluetooth mouse wouldn't wake the computer from sleep mode using the DBT-120. Once I installed the Apple Bluetooth module, the BT preference panel gave me the wake/sleep option and everything works fine now.
The G5 model's BT and AirPort modules were DIY, the Pro model should be also? Others here may know for sure. If so, I'm betting it's also a lot easier!
Hope this helps.

How to use a bluetooth cellphone for audio input and output

Hello, I was wondering how to set-up my Mac Book so that I can use my bluetooth cellphone for audio in and audio out. Ideally, I would like to use my handset for talking on iChat and Skype. Has anyone had any luck doing this? When I bond my cellphone these optiosn do not appear. I know that this is easy to do on a Windows machine but I am not sure about how to do it on my Mac Book.
Thanks!

Yes it should do what you want.
Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices.

How to use the Bluetooth module natively in Parallels Desktop

link to the instructions on how to enable bluetooth natively in parallels:
http://www.mattiouz.com/blog/2007/04/13/how-to-use-the-built-in-mac-bluetooth-in -windows-under-parallels/
link to the .exe that installs the apple driver for the bluetooth module needed in parallels: http://www.mattiouz.com/download/AppleBluetoothInstaller.exe
now my bluetooth is accessible under parallels 3.0.5158. i scanned with a bluetooth netowrk scanner and i had no problems connecting to my treo 650.
i took my some time to find the info but @ last i found it;-)
Message was edited by: smokeonit

Hi,
You canr use text modules in script. You have to use standard texts .
Standard text are maintained in SO10 transaction.
you can create translation text for other languages also . So based on logon language it will print translation text.
go to SO10
give textname it say Ztextname id as ST and language as EN
say create, then you will get editor there maintain your text and save it . then come back . Now change language (say for german DE) say create and eneter translation text and save it.
so now you have created a text called ztextname which you can use in your script.
Inorder to insert the texts in your script do as below
go to any window editor and select path
Insert->texts->symbols->standard symbols
then you will get popup in which you have to mention all the parameters that you have created earlier.
after inserting just change language EN to sy-langu
Reward points if useful
About text elements Sravan already given some informatiomn
Regards,
Nageswar

How To use certificate in SOAP-Adapter

Hi, well because the invoked external WebService needs a certification in SOAP-Adapter the option <i>Configure Certificate Authentication</i> exists.
I know that i have to put some values in keystore via VisualAdmin but i only got a certificate key. Do i need to generate some other values?!
Can somebody provide me with some links or a blog on this issue?!
br

See this
/people/rahul.nawale2/blog/2006/05/31/how-to-use-client-authentication-with-soap-adapter
Regards,
Prateek

How to use URL for http adapter

Hello,
Iam working on IDOC2HTTP scenario. Here the end user system they have given only url address userid and password.End user is htttp. Please can u help me how ot use that.
Thanks in Advance.
Regards,
Abhiram

Hi Abhiram,
you can put there the URL directly or link to a destination where you store the address.
Have a look to [Configuration of HTTP receiver adapter|http://help.sap.com/saphelp_nw2004s/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/frameset.htm]
Regards,
Udo

How to use Toshiba Bluetooth USB adapter?

Similar Messages

Maybe you are looking for