How to use "where" condition when we use update or delete in a dbadapter?

Hi
I want to update/delete a record in a database table based on one of its fields. Which means I have to use "where" condition to check the value of the field and only then I can decide whether or not the record can be updated/deleted.
When I try to use the dbadapter update/delete options, I dont see any provision for writing the "where" condition.(May be I am missing something).
I know that I can use the custom sql option and write an sql command to achieve this.
But I would like to know if this can be done when using the update/delete option itself in the dbadapter.
Thanks in anticipation.
Ravi

Hi,
You can use the logical delete option. In that case you can supply a value for the column that indicates if a record is changed and have it picked up by the db adapter.
Andre

Similar Messages

HT201612 how to use ctrl+alt+delete to restart with boot camp

how to use (ctrl+alt+delete) to restart?

You press all the keys (ctrl+alt+delete) at once
Some information
In a personal computer with the Windows operating system, Ctrl-Alt-Delete is the combination of keyboard keys that the computer user can press at the same time to terminate an application task or to reboot the operating system (have it shut down and restart itself). In Windows 95 or any later systems, Ctrl-Alt-Delete brings up a window that allows a user to see the status of all currently running programs and to terminate any of them, and also offers the options of shutting down, restarting, and so on (the specific options vary slightly with the particular version of windows). In Windows 95 or 98, if Ctrl-Alt-Delete is pressed a second time or twice in a row quickly, the operating system closes all programs that are running and then restarts.
When the operating system seems to hang suspended while waiting for an application program to continue, a user is also left without a way to regain control of the system. The Ctrl-Alt-Delete key combination allows the user to terminate the "hung" application and, if that doesn't work, to reboot the system. The system can also be restarted using the mouse to select Start-->Turn Off the System-->Restart. However, Ctrl-Alt-Delete sometimes works when the menu option doesn't.

How to Use PowerShell to Delete FIM Users That Have a Null attribute name

FIM Community Information Center Article
Wiki Page:
How to Use PowerShell to Delete FIM Users That Have a Null <attribute name>
Go to the FIM Community Information Center
Mike Crowley | MVP
My Blog --
Planet Technologies

Have you run side-by-side metrics on this?
I've run the Delete Object method and your script against similar data sets and yours appears to take a fair bit longer. I'd have to re-run in identical circumstances, a few times, to really say for sure, but my initial impression is that it will take hours
longer.
I guess the point is somewhat moot anyway, as for me the bit that generally takes longest is the actual query, rather than the deletions.
Boy how I wish I could just enter something into the FIM Portal directly that would blast out a bunch of users matching a query. One day...
FIMSpecialist.com | MCTS: FIM 2010 | Now Offering
ECMA1->ECMA2 Upgrade Services

Once I accept a calendar invite on my iPhone, I cannot delete or otherwise modify it. Even when it is updated or deleted by the invitor, it does not change on my iPhone. Is there a fix for this?

Once I accept a calendar invite on my iPhone, I cannot delete or otherwise modify it. Even when it is updated or deleted by the invitor, it does not change on my iPhone.

My husband and I both have iphone 4's and we both have this same problem. I have an open ticket with apple, but so far they haven't been able to figure this out. First, they told me the problem was the mail server I was using. So, I tried sending/receiving invites from gmail and yahoo which they told me should work. Neither did. It doesn't matter whether the original invite was created in iCal or in Outlook or Google, once I open the invite in my mail and hit "add to calendar" the event is locked into my calendar. If the originator sends an update or cancels the meeting, I will receive an email with the new info, but the event doesn't change in my iphone calendar. This is completely lame. Why bother putting a calendar app on the phone if it can't handle basic functions?
Did you ever get a response from anyone or figure out a workaround? I'll post if I hear back from Apple with a fix.

How to know where and when my account logged in by...

Recently my account was used by someone and sent out a misleading message, which cause a great trouble to me. I sensed the one was in purpose. Can I check where and when my account was used on that date? How? Please help !!! waiting for your reply...

hi dominic.
thanks for the help and the links.
there is something terribly lacking in mac UI with respect to this unless i am missing something. if i do a search in Spotlight i see results and even when i see the file i want to know something about i have to OPEN FINDER which shows a ton of results (including hundreds if not thousands of eml file that i have to call mac and probably pay to find out why they are still showing up when prefs in Spotlight say to not show them...) and only then can i actively select the file and have it show a file path at the bottom of the finder window.
this is maddening. isn't there an option to show this information in Spotlight or to show this information WHEN THE FILE IS OPEN (apologies for the caps). i mean, if i have a file open, maybe i don't know /where/ it came from for some reason.
for instance, if i am in a hurry and i open the file directly from Spotlight i can edit it and save it but i still have no idea where it resides on my hard drive. similarly if i open a file directly from spotlight and DUPLICATE a file and i want to save it as Version 2 - i have to - - - - well i guess i have to run another search for the file i just opened and am working upon in order to just save the dang file to the same location the original is in?
i mean, the links are showing that i should open Get Info but i think i need to see the file in finder to run this command anyway since i have to right click on the file itself.
maybe i am missing something but can't MAC OS just show me the FILE PATH at the top of the document like it does in Finder and also show me the FILE PATH in Spotlight? seems like the current implementation is like a big game of hopscotch for no good reason except the information is not shown to the (power) user.
maybe i am missing a new feature in ML or in Mavericks or maybe i am using the wrong terms in the original title?
THANK YOU

How to pass where condition to report for condition

hello people ,
i want to pass where condition for the report statement .
for example ,
select ename from emp
i want to pass parameter carry <where deptno=40>
thanks

Good Morning oracleuser,
If we understood correctly, Bind references (or bind variables) should use this issue.
a>select ename from emp where deptno= :Dept_Number
If you have any more questions, please post it.
Otherwise:
Mark Helpful or Answer accordingly.

Difference between View Creiterias and Where Condition when defining a VO

Hi Friends,
I am trying to understand the difference between specifying Where clause conditions in the View Criteria or directly in the VO Query.
both meet the same requirement in executing the Query with the Where Conditions. Is there ay specific diff.?
Thanks,
User

Hi Rade
There are many ways to optimize the performance of your querys or VO, the most importantly is thing is not to make full scans of your table, always use the explain plain testing the query execution, filter using the indexs atributes, VO editor have a tuning SQL execution in the query optimizer hint you can use FIRST_ROWS for example.
More information to tuning your query check this link [http://download.oracle.com/docs/cd/B28359_01/text.111/b28303/aoptim.htm#i1006353]
Good Luck

How to use CSAP_MAT_BOM_MAINTAIN for deleting / changing sub-items?

I'm trying to use CSAP_MAT_BOM_MAINTAIN for BOM create / change / delete.
Issue: This Function module is not working when I'm trying to delete / change sub-items of a BOM. I'm getting update termination (ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC) during BOM post.
Is there a way to fix this?
(1) BOM creation part is working fine
(2) BOM item (without any sub-item change) change / delete is also working

hi
The following parameter are important parameter and mandatory
Matnr ; Enter the material Number
BOM_USAGE : Ther many BOM available that is sales BOM and Production BOM etc here you need to mention usage of BOM that is for sales or production
I_STKO : Enter the BOM Header information . Note : Ask your Functional consultand
Apart form this parameter, all are optional so do worry
regards
anand kumar

Using Update and Delete Links in QBE Reports with a Template

QBE Reports in Portal allow Update and Delete links against Report output rows.
When run, if I press the Update link it displays a simple form and utilises the Template I specified for the Report (as expected).
If I press the Delete link it displays a page with a default Oracle template (including Navigator, Home and Help buttons I wish to suppress)
How can I get the Delete to use the specified Template?
Any simple fix appreciated.

QBE Reports in Portal allow Update and Delete links against Report output rows.
When run, if I press the Update link it displays a simple form and utilises the Template I specified for the Report (as expected).
If I press the Delete link it displays a page with a default Oracle template (including Navigator, Home and Help buttons I wish to suppress)
How can I get the Delete to use the specified Template?
Any simple fix appreciated.

How to use Update Manager

I am new to VMWare. I have 2 ESXi 5.5 hosts with 2 virtual machines(WS 2008R2) on one and 1 virtual machine(WS2008R2) on the other. I have VMWare VCenter Server installed on one of the windows vms that has the 2 vms. Update Manager is installed on that windows vm also. I do not have centralized storage. These windows vms are production servers. I have never updated these host. They have over 200 updates.
Question: How do I go about updating these host? I know the windows server vms have to be shut down. If I shut down the vm with Update Manager on it, how will it update the host its on? Should I allow every update to update? If not, how do you chose which updates to update. Is there a way to move these vms around when you don't have centralize storage?
I have had these questions out there for 2 days and no one seems to be able to answer them.
Can someone answer this one question: Is it possible to update the ESXi host that vCenter server is install on, with some sort of schedule that will shut down the vms(even the one that vCenter is install on) and put it in to maintenance mode and run the updates on the ESXi host.
Ok, here is how I did it:
I cloned the vm with vCenter Server on it. I put the clone on the other host.
I changed the ip address of the original server before I shut it down. I deleted the dns entry on my dns server that pointed to it and flush the cache.
I booted the clone and change the ip address and rebooted.(It will not let you use the ip address of the original server, it still sees the ip address of that server on the network).
Make sure you give the vCenter Server services enough time to come up before you log on.
You will loose connectivity to the Update Manager Plugin because of the ip address change. Follow these kb articles to fix that-kb 1013222,kb 1014639,2007398. Did not have any trouble with the fixes.
Once you get Update Manager running you can scan and do the update for the host.
You have to do your normal shut down the vms and put in maintenance mode to update.
After that shut down the clone and delete it.
Bring up the original vCenter Server and change the ip and reboot.
I answered this in case someone else runs across this problem.

Hi, I'm not familiar with that Mac feature since I don't use a Mac. However, you can go to this site and Install:
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Also you can now use the automatic Flash Player notification for the Mac here:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
With this, the next time Flash Player has an update you will receive a prompt and can choose to "Install now"/"Remind me later" or "Don't Install" I use it all of the time and the update is done in under 2 minutes!!
Hope that helps,
eidnolb

How to use Update Statement in ODI Procedure

Hi,
How can I use an update statement inside an ODI procedure.
Thanks

Hi,
You do not need the BEGIN and END. ODI procedures are free text, so you can simply write your update statement, as you would in toad/sql developer etc etc. Just make sure you set the Technology and the logical schema. It is how ever best practice to also use the API:
<%=odiRef.getSchemaName("YOUR_LOGICAL_SCHEMA_NAME", "D")%>. to prefix tables. This way, you select data from different schema's in the same instance (as long a your user has the correct privs).
Cheers
Bos
Edited by: Bos on Jun 22, 2011 3:09 PM

How to use COPA to delete Order status "ORRQ"

Dear Gurus
When I use Tcode: COPA to store a process order, the system returns "0 order stores", why was that?
Prequisition:
1, The order status with ORRQ, TECO
2, The customizing of Order-dependent parameter have selected "order record required"
Please kindly tell me what should I to do?
Thanks in advance.
BRGs
Sivan

Sivan,
Check in OAC3 transaction whether for Object type BUS0001 content server link is maintained.
Check whether the inspection lots for the inspection during production and for the incoming inspection have statuses Inspection close completed and Usage decision has been made.
Regards,
Prasobh

Where, when, how to run install-csdatabase when you're updating everything

If my persistent chat database is on the same sql server and instance as all the other databases, do I only need to run
Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn FEBE.FQDN -Verboseon a lync enterprise pool server or do I still have to runInstall-CsDatabase -DatabaseType PersistentChat -SqlServerFqdn PChatBE.fqdn -SqlInstanceName DBInstance -Verboseon the same enterprise pool server I just upgradedor do I run the command on the persistant chat server after I upgraded it?
http://support2.microsoft.com/kb/2809243#6 is confusing when running install-csadatabase
"When Persistent Chat Services are collocated with the SQL BE Databases". Does this mean the persistent chat databases or all the databases?
thanks,
rudif

Agreed, it's not clear. Check out this article too:
http://technet.microsoft.com/en-us/library/jj721942.aspx
From the above article: "If this is an Enterprise Edition Back End Server and there are collocated databases on this server, then type the following at a command line:"
Install-CsDatabase –Update –ConfiguredDatabases –SqlServerFqdn <SQL Server FQDN> -ExcludeCollocatedStores
Then from the article you referenced: "When Persistent Chat Services are collocated with the SQL BE Databases, run the following command:"
Install-CsDatabase -DatabaseType PersistentChat -SqlServerFqdn <SQL Server FQDN> -SqlInstanceName DBInstance -Verbose
I typically run those two, when it says ""When Persistent Chat Services are collocated with the SQL BE Databases" it means if you're using the same SQL instance for your Enterprise Edition Front End databases rather than have a separate SQL
Server or instance just for Persistent Chat.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to use rules to delete old messages from a certain mailbox?

This has bugged me for years. I keep waiting for it to be fixed in the next update of Apple Mail, but it never is!
Is there a way to apply a rule to a certain mailbox? For instance, I have a mailbox (folder) that all of my newsletters get automatically thrown into, and I'd like the older ones to be deleted as the new ones come in. The problem is, there is no way (that I know of) that allows me to apply a rule to this mailbox.
Years ago I had no trouble achieving this function with OutlookExpress. IF MESSAGE IN MAILBOX XXX IS OLDER THAN XXX THEN DELETE. Why is Apple Mail missing this feature? Frustrating. Possibly this has been fixed in Leopard/Mail but I wouldn't know, I'm stuck with Tiger for a while because my g4 won't play nice with Leopard... I'm using Mail 2.1.3

Mail's rules only apply to incoming messages. You can create such a rule but it will not run automatically. You would need to select the all the messages in that mailbox then select Apply Rules from the Messages menu. Alternatively you can create a Smart Mailbox that's configured to contain messages older than a set criterion. Periodically delete the contents of the Smart Mailbox.
You could purchase Microsoft Office in order to use Entourage instead of Mail, Address Book, and iCal. Entourage has additional rules programming.
"Why is Mail missing this feature?" Perhaps because it isn't very much needed. Perhaps to give you a reason to ask the question. Or maybe just to aggravate those who feel they cannot live without it. Best you email Steve Jobs for an answer. It has not changed in Leopard.
You can always submit a feature request at Feedback.
Or, you can return to OS 9 or Windows where you can use Outlook Express.

How to use update trigger in sql server 2008 with specific column

Hello friends currently my trigger updates on table update, and I need to change this to only fire when specific column changes.
/****** Object: Table [dbo].[User_Detail] ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[User_Detail](
[sno] [int] IDENTITY(1,1) NOT NULL,
[userid] [nvarchar](50) NULL,
[name] [nvarchar](max) NULL,
[jointype] [nvarchar](50) NULL,
[joinside] [nvarchar](50) NULL,
[lleg] [nvarchar](50) NULL,
[rleg] [nvarchar](50) NULL,
[ljoining] [int] NULL,
[rjoining] [int] NULL,
[pair] [int] NULL
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[User_Detail] table data ******/
SET IDENTITY_INSERT [dbo].[User_Detail] ON
INSERT [dbo].[User_Detail] values (1, N'LDS', N'LDS Rajput', N'free', N'Left', N'jyoti123', N'SUNIL', 6, 4, 4)
INSERT [dbo].[User_Detail] VALUES (2, N'jyoti123', N'jyoti rajput', N'free', N'Left', N'mhesh123', N'priya123', 3, 2, 2)
SET IDENTITY_INSERT [dbo].[User_Detail] OFF
/****** Object: Table [dbo].[User_Detail] trigger ******/
CREATE TRIGGER triggAfterUpdate ON User_Detail
FOR UPDATE
AS
declare @userid nvarchar(50);
declare @pair varchar(100);
select @userid=i.userid from inserted i;
select @pair=i.pair from inserted i;
SET NOCOUNT ON
if update(pair)
begin
insert into Complete_Pairs(userid,pair)
values(@userid,1);
end
GO
/****** Object: Table [dbo].[Complete_Pairs] Script Date: 05/22/2014 21:20:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[Complete_Pairs](
[Sno] [int] IDENTITY(1,1) NOT NULL,
[userid] [nvarchar](50) NULL,
[pair] [int] NULL
) ON [PRIMARY]
GO
my query is TRIGGER triggAfterUpdate is fired only when pair column in User_Details table is update only and when we update other column like ljoin or rjoin then my trigger is not fired
please any one can suggest us how it can done or provide solution
Jitendra Kumar Sr. Software Developer at Ruvixo Technologies 7895253402

>select @userid=i.userid
frominserted i;
select
@pair=i.pair
frominserted i;
The code above assumes a single row UPDATE.
You have to setup the trigger for set processing like when 100 rows are updated in a single statement.
UPDATE trigger example: http://www.sqlusa.com/bestpractices2005/timestamptrigger/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

How to use "where" condition when we use update or delete in a dbadapter?

Similar Messages

Maybe you are looking for