How to user Smart form for the BID in SRM 4.0

Hello,
We have SRM 4.0 and we need to send the BID information to the vendor. This is because we have vendors that are not able to get in to our system and we have to send them a print out of the bid information so that they give us back the information. Then our users will insert it in the system.
It could be as an attach to the email or it could be printable in the program SPPS - Selecting and Processing Outputs.
SAP says that there is a smart form BBP_BIDINV_BID and BBP_BID_NOTIFICATION but I am not managing to make them work.
I found some messages to help solving specific problems so I assume it is possible to do this...
Is there someone that can help me?
Thanks very much.
My best regards,
Catarina Campos

Hi
Here is the standard solution to use your own forms:->
- copy the smartform BBP_BIDINV_BID to ZBBP_BIDINV_BID (transaction SMARTFORMS) and apply your changes
- use BADI to call your custom form ZBBP_BIDINV_BID
For PDF output form change use BADI BBP_OUTPUT_CHANGE_SF.
For email notification change use BADI BBP_CHANGE_SF_BID instead.
You will find all relevant documentation in SPRO --> Supplier Relationship Management -->
SRM Server --> Business Add-Ins (BAdIs) --> Document Output -->
- Change Forms for Document Output
- Change Smart Form for E-Mails Relating to Bids
Please go through the links below for more details ->
Re: how to use cutom smartform instead standard?
Re: Email message customization ?
Re: Bid Invitation Email Subject
Re: Email notification to bidder should reflect start/end date and time
Re: RFQ Smartform in SRM
Re: Standard Text
Do let me know.
Regards
- Atul

Similar Messages

How to Generate a complex smart form for the Sales Order different pages h

How to Generate a complex smart form for the Sales Order different pages has different page Layouts explain me?

in print program in interface when calling the form there should be some option to tell it to make a NEW spool everytime.
I have it in mind for sap-script it is ITCPO-TDNEWID. Dont have it in mind for SAMRTFORMS but still it should work somehow similar.

Smart Form for the CRM Survey

Hi Experts,
I want to do a smarform for the CRM Survey, is there any standard smart form for this.
How do we trigger the smart form for the same.
Thanks in Advance,
Praveen

Hi Praveen,
As per my understanding u have to make a custom smartform for CRM.
Try using FM CRM_ORDER_READ with importing Parameters IT_HEADER_GUID and for Bar Code
use standard smartform BC470_FLOWD_LABELS.
Hope This Helps...
Thanks
Ravi

How to use smart form for production orders

Hello Experts,
I have a couple of questions about printing out production orders from SAP, from OPK8.
My ABAPer has developed a smart form and I am trying to use the same for the list LG01, i.e. the object list.
Since, there was no place to assign a smart form directly, so the ABAPer has copied the existing print program , defined for my ref. order type and LG01 and assigned the new smart form inside the program. This new program has now been assigned against my ref. ord type, LG01 and all the plants, as seen in screenshot below.
Now, what is happening is that when I give print for my order, a pop-up screen asks for the printer. I give LOCL , check 'print now' and then click on the print preview.
I can see the new form that has been developed and it is alright.
Then, when I click on the back arrow, once again the print pop-up screen appears. Now, when I enter LOCL, print now and click the print preview, then I see another form open up before me. I am assuming that this is some form which was pre-configured in the system, under the section 'Forms', for the same object list LG01.
Do I have to assign the new smart form under the section "Forms' also, for the ref order type and LG01? or the change in the section 'print programs' is enough for the new form to kick in? Please guide me. I tried to but it gave the error that the form is not created in English. Also , my form is a smart form, not a SAPScript or PDF form, so I wonder if that will help at all.
Requirement :- I need to suppress this second form somehow but do not know how to do it. I want that only one form, i.e. my smart form should be printed out when someone gives print from the order.
Let me know if something is not clear.
Regards
P.R

Hi P,
Go a few steps down and remove flags on the documents you don't want to print:
this are just suggestions, they can be changed in your production order, in CO02, menu Order->Settings->List Control.
regards,
Edgar

Creation of Smart Forms for PDF

Hi All,
I am new to SFP. So, please tell me how to create Smart Forms for PDF.
I already have an SAP standard form of Customer Invoice in this format (SFP) and I need to change the layout and add some additional fields in it as well.
Please guide me through the process. Earliest reponse will be highly appreciated.
Regards,
Shabbar

Hi,
I take that you meant PDF Forms in SAP.
Refer the following help links.
http://help.sap.com/saphelp_nw04s/helpdata/en/dc/f1783fe3263042e10000000a114084/content.htm
This PDF link (Has got many Pdf files)
https://www.sdn.sap.com/irj/sdn/interactiveforms?rid=/webcontent/uuid/d1088b7e-0c01-0010-c78e-984c0537e3ec [original link is broken]
Also check this Tech-ed 06 session at Amsterdam.
http://www.sapteched.com/emea/edu_sessions/session.htm?sid=317
Check this download from SDN.
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/2dd3dbcd-0401-0010-55b8-b10808ff688e
Is this you are looking for?
Feel free to revert back.
--Ragu

How to provide security settings for the adobe form using livecycleDesigner

Hello,
I am very new to form designing,
can any one please tell me how to provide security settings for the adobe forms at client side?
Regards,
Menaka

Hi,
that is a good topic for the ADFS forum.
ADFS forum - http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
But you could pass the user-agent as incoming claim type Client User agent. User-agents can be manipulated, so if that is an issue you can look into Device Registration and the Device OS type from there. That is also a incoming claim but requires DRS and
DRS is not available for all plattforms.
Hth,
Lutz

How to define new colors for the form?(Finish)

Hello! Everyone!
I want to define new colors for the new form.
But I don't find where I can define it.
How to define new color for the form?
Thanks in advance!

You have to set the Canvas color or as I said earlier you need to use one of the available color schemas on the OAS or Builder runtime.
If you want to use user defined colors in the builder, then you need to create a new color palette and use it.
I personally haven't tried it, but there is a section in the online help that describes how to do this.
Tony

How To Get The Smart Form Into The PDF File

Hello Friends,
Can Any One Tell How To Get Smart Form in PDF.
I used this RSTXPDFT4 Program.
It is asking The Spool Number.
How to get the Spool Number.

the steps are
SmartForms Output to PDF
There is a way to download smartform in PDF format.
Please do the following:
1. Print the smartform to the spool.
2. Note the spool number.
3. Download a PDF file (Acrobat Reader) version of the spool by running Program RSTXPDFT4 and entering the
noted spool number.
how to get spool number
The simplest method is to read the spool table directly, table TSP01
example code
REPORT zsuresh_test.
* Variable declarations
DATA:
w_form_name TYPE tdsfname VALUE 'ZSURESH_TEST',
w_fmodule TYPE rs38l_fnam,
w_cparam TYPE ssfctrlop,
w_outoptions TYPE ssfcompop,
W_bin_filesize TYPE i, " Binary File Size
w_FILE_NAME type string,
w_File_path type string,
w_FULL_PATH type string.
* Internal tables declaration
* Internal table to hold the OTF data
DATA:
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
* Internal table to hold OTF data recd from the SMARTFORM
t_otf_from_fm TYPE ssfcrescl,
* Internal table to hold the data from the FM CONVERT_OTF
T_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE.
* This function module call is used to retrieve the name of the Function
* module generated when the SMARTFORM is activated
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_form_name
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
fm_name = w_fmodule
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Calling the SMARTFORM using the function module retrieved above
* GET_OTF parameter in the CONTROL_PARAMETERS is set to get the OTF
* format of the output
w_cparam-no_dialog = 'X'.
w_cparam-preview = space. " Suppressing the dialog box
" for print preview
w_cparam-getotf = 'X'.
* Printer name to be used is provided in the export parameter
* OUTPUT_OPTIONS
w_outoptions-tddest = 'LP01'.
CALL FUNCTION w_fmodule
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
control_parameters = w_cparam
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
output_options = w_outoptions
* USER_SETTINGS = 'X'
IMPORTING
* DOCUMENT_OUTPUT_INFO =
job_output_info = t_otf_from_fm
* JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
t_otf[] = t_otf_from_fm-otfdata[].
* Function Module CONVERT_OTF is used to convert the OTF format to PDF
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
* ARCHIVE_INDEX = ' '
* COPYNUMBER = 0
* ASCII_BIDI_VIS2LOG = ' '
* PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = W_bin_filesize
* BIN_FILE =
TABLES
otf = T_OTF
lines = T_pdf_tab
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* To display File SAVE dialog window
CALL METHOD cl_gui_frontend_services=>file_save_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILE_NAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* WITH_ENCODING =
* PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = w_FILE_NAME
path = w_FILE_PATH
fullpath = w_FULL_PATH
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Use the FM GUI_DOWNLOAD to download the generated PDF file onto the
* presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_bin_filesize
filename = w_FULL_PATH
FILETYPE = 'BIN'
* APPEND = ' '
* WRITE_FIELD_SEPARATOR = ' '
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
* DAT_MODE = ' '
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* WK1_N_FORMAT = ' '
* WK1_N_SIZE = ' '
* WK1_T_FORMAT = ' '
* WK1_T_SIZE = ' '
* IMPORTING
* FILELENGTH =
tables
data_tab = T_pdf_tab
* FIELDNAMES =
* EXCEPTIONS
* FILE_WRITE_ERROR = 1
* NO_BATCH = 2
* GUI_REFUSE_FILETRANSFER = 3
* INVALID_TYPE = 4
* NO_AUTHORITY = 5
* UNKNOWN_ERROR = 6
* HEADER_NOT_ALLOWED = 7
* SEPARATOR_NOT_ALLOWED = 8
* FILESIZE_NOT_ALLOWED = 9
* HEADER_TOO_LONG = 10
* DP_ERROR_CREATE = 11
* DP_ERROR_SEND = 12
* DP_ERROR_WRITE = 13
* UNKNOWN_DP_ERROR = 14
* ACCESS_DENIED = 15
* DP_OUT_OF_MEMORY = 16
* DISK_FULL = 17
* DP_TIMEOUT = 18
* FILE_NOT_FOUND = 19
* DATAPROVIDER_EXCEPTION = 20
* CONTROL_FLUSH_ERROR = 21
* OTHERS = 22
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Do reward if helpful
Edited by: sharad narayan on Apr 4, 2008 2:14 PM
Edited by: sharad narayan on Apr 4, 2008 2:18 PM

*configure the Picking list(PL) output type,a smart form for PL.

Hello SIR,
I want to configure the Picking list(PL) output type,a smart form for PL but there should be an output type to print*.
i have assign the out type to shipping point in t.code ovlt .i have created picking list in t.code nact. i created sales order and delivery. i have check my picking list in ovl2n change mode picking out put is available in extra-picking output. i have checked my picking out put for smart form in systems-service-output control if i execute it show like no data to list. no spool request number has generated there.
so were i have to check picking list preview for smart form . is spool request number is necessary.plz help me to view preview of picking list.or plz say the steps to configure this to preview.
thanks,
agilarasan

Hi,
Go to Nace .The application for Goods Issues is
ME - Inventory Management -> select and click on output types ->select wa03 output type and click on processing routines here you can find the form name and the driver program name.So while printing select wa03 as the output type.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards,
Harini.S
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 3:46 PM

How to CAC (Smart Card) enable the server within JDev

I need to know how to CAC (Smart Card) enable the server within JDev, or if it is even possible.

Kamran,
you are definitely thinking in the right direction.
1) Would I need to export or enter all the existing users of the system presently available through an internal database to the SSO Repository or there is a different way of getting the users to the OID when they first run the url or our Oracle Forms App?
You have a choice: pre-load (probably using LDIF) or create what I call a self-registration process. Pre-load will require the arduous task of gathering the CAC user CN's in advance. This is technically easy but logistically a nightmare.
I created a self-registration JSP which is invoked by a failure to lookup a user in OID. Registration involves requiring a user to enter valid database credentials, testing the credentials (by making a connection) and binding the database userid/password to the CAC identity.
2) How would I get the CAC Certificate CN from the Browser or CAC Card so I can make the comparison to the OID CN?
When you configure the SSO for certificate authentication, the HTTP_Server will pass the SSL variables (which include the CAC certificate which was authenticated in the SSL handshake) to the sso/web application deployed in the OC4J_SECURITY container. You can install your own plug-in that the SSO will invoke where you can retrieve the authenticated certificate and get any of the information therein from Java.
I recommend you get very acquainted with the SSO Admin Guide (esp. Cert authentication chapter), as well as, the Forms Deployment Guide (esp. SSO chapter).
There is too much to fit here. Things would be a lot easier if Forms Server supported enterprise users for authentication to database. Forms apps are relegated to the whole business of RADs and such which gives you X.509 certificate (and thus CAC) authentication but is rather convoluted IMHO (password in the clear in the RAD, orclResourceViewer permission for Forms Server, userid/password login in the background) but that is a different discussion.
Good Luck.
regards,
tt

How to make a form for input in web interface builder

Hi expert:
How to make a form for input in web interface builder?I have already used it to do PS planning, but I don't know how to draw lines and checkboxes . Thanks in advance.
Allen

WAD:
Open the WAD and create a new template. On the left hand navigation you will have several Web Items available. Under 'Standard' you have 'Analysis' item. Pull that into your template to the right. Under the Properties tab you need to pick the query [form/layout] that you have built in Query Designer.
You will also find other items such as Button group, Checkbox, drop down, list box etc available. Pick and drag into the template whatever it is you require. Lets say you want a button. Under the Properties tab select the 'Command' that you require. You could use standard commands that are available there. You could also define functions and commands that you require.
Query Designer:
Open the QD and drag the characteristics and key figures that you require into the rows and columns of the QD. You would need to specify restrictions under the Filter tab of the QD based on the granularity of data that you require. You would need to remember that the key figures need to be made Input Ready [do this by clicking on KF and on the planning tab select "change by user and planning functions"].
This shouldgive you a start. After you've explored it yourself a bit we can discuss further and I can certainly provide you additional details/material on these areas.
Srikant

How to display Smart form in Multiple Languages ?

Hello,
Very Good evening!
How can I print the Smart Form in Multiple Languages like Korea, German and Japneese....
I got a requirement where I need to display the developed Smart form in these languages. As of now it is displayed only in the Language ENGLISH.
Any Suggestions will be appreciated!
Regards,
Kittu

Hello kittu....
I would recommend that you create a single Smart Form in the primary supported language (or the one which you're most comfortable maintaining forms). Embed all necessary logic in this form, and design it with the idea that it would need to be viewable in multiple languages .
Then use transaction SE63 to translate all necessary form components into each desired language -- one by one -- and they will all be bound together under the same form name. In my experience, a basic multi-column spreadsheet (put together with the guidance of professional translators) works well as a translation guide.
The advantages of a single, shared form include: consistent look and feel, avoiding dual maintenance for shared logic (or, in your case, up to 10x maintenance), and simplified output determination. On the other hand, a single form does constrain your design and can make for a more complex implementation.
Hope this is useful
Best of luck,
Bhumika

Smart form for cutting list---Urgent

Hi Experts,
I have to create a smart form for cutting list in PP module.
Selection criteria are:
1.) select all orders(AFKO-AUFNR) wiht AFVU-USR00 = 'CUT' where AFVU-AUFPL = AFKO-AUFPL
2.) Group according to material no.(AFKO-PLNBEZ)
Form fields are as follows:
Name : MARC-MATGR
Cut & Process date: AFVV-FSAVD where AFVV-AUFPL=AFKO0AUFPL
Ref Packing date:   AFVU-USR00= ASSY_GAL of th superior order(AFKO-MAUFNR,where AFVU-                             AUFPL   = AFKO-AUFPL)
Order : AFKO-AUFNR
Sales Order: AFPO-KDAUF of superior order(AFKO-MAUFNR,where AFVU-AUFPL   = AFKO-AUFPL)
Item Number :
Qty: AFVV-MGVRG where AFVU-USR00='CUT' & AFVU--AUFPL = AFKO-AUFPL
& co many other fields form AFKO table.
I am bit confused what will be the fields & tabels i have to declare in Form interface & Global parameters.
What will be the internal table for the table which display data.
In the main page i have to show 10 colums i dont no how to define table for those 10 columns
As per the requirement can anywone please tell me in detail to solve these problems. like which r te tables i have to use in interface parameters & which wil be in global paramenters.
Which itab i will use to create the table in main window
& how i can declare 10 columns in that table.
Regards,
Nik

hi nikil.
        I use to follow this procedure.
1) Based on the select criteria.fetch values in to differnet itab's from differnet tables.
2) then try to put the selected rows based on condition into a single internal table.
3)u can send that final internal table from program and u have to use that internal table in form interrface.
4)design the smartforms and call the fields accordingly from the final inetrnal table .
5)u should be good in using select query ,read table statement etc.
check this with other and take a decision.some of them use to write codes then and there before using the fields using progarm lines.
but i am comfortable in my method.
mani

Smart form for a invoice

Dear All,
We have designed a smart form for printing of excise invoice. The invoice is in two pages. The second page printing is not aligned and starts immediately after the finish of the 1st page.
There is no buffer place between two pages.
How can we provide a buffer between two pages so as to print the 2nd page in alignment with the pre printed stationary and the first page?
Regards.
Milind Dugade

It very dificult to give you guidance w/o seeing your smartform config. page format. If you are using custom page format or standard page format. Have define next page properly or not. What are line count in first page etc etc.

In weblogic server when I Setting Up a User and Tablespace for the Server M

In weblogic server when I Setting Up a User and Tablespace for the Server Migration Leasing Table in Sql Plus I got an error. ORA-00972: identifier is too long

Refer: How to: Grant User Access to a Report Server (Report Manager), but this gives a step-by-step procedure for
adding users who are a part of the Domain. In your case you are trying to add users who are not a part of the domain, meaning, you are trying to create users only specific to Reporting Services, am I right?
But Reporting Services either relies on AD to authenticate the users, or you can create a custom-authentication extension to authenticate the users.
In your case, you might need use a custom security extension, and use that to create/delete/modify users. Check the Forms authentication Sample here:
http://msftrsprodsamples.codeplex.com/wikipage?title=SS2008%21Security%20Extension%20Sample&referringTitle=Home
Other references:
Implementing a Security Extension
How to: Configure Custom or Forms Authentication in Reporting Services
Hope this helps
Chaitanya( Twitter |
Blogs )
Any documentation bug? Tell us about it at
Connect. Please feel free to add any community comments in any of the MSDN/technet articles.
This posting is provided "AS IS" with no warranties, and confers no rights.
The next CTP for SQL Server Code Name "Denali" is coming soon.
Sign up now to be notified of the next CTP release.

How to user Smart form for the BID in SRM 4.0

Similar Messages

Maybe you are looking for