How to using the JSP print the byte[] or byte?

how to do?

this byte[]'s content is a PIC,if let this byte[] to string did print is character string, not the PIC.you see?:)

Similar Messages

How to use the t-code vf31 tor taking print out of invoice

Hi,
How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
venu

Hi,
Please find the steps
Output type                     RD00
Transmission medium             1
Sort order                      01
Processing mode                 1
Please give the oppropriate fields,
if the still error persists check the configuration in NACE transaction code.
thanks
Kuntla

How to use the print option for photos?

How to use the print option for photos. I have a wireless printer but how do I set it up?

http://www.apple.com/support/iphone/assistant/airprint/

How to use the cartridge HP122 in the printer CH340B?

How to use the cartridge HP122 in the printer CH340B - HP DJ 1000? cartridgeHP301 in our country is not found!
UKRAINE.

You will need to Contact HP to request a "Regionalization Reset". There should not be any charge for this, it is covered as part of the cartridge warranty. You will need to have access to your computer and printer while on the line with HP. You will also need to have a set of cartridges for the new region, once the reset is complete cartridges from the original region will no longer work. HP's web page on the subject is here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to use the JE database with other data types than byte arrays?

Hi! I searched the javadoc of Berkley DB JE, for a way to introduce entry (but I need also retrieve) data with other type than byte arrays, e.g. String, or anything else, as int may be, etc.
Still, I didn't find any such way, because the main (only?!) method to entry data into an open database - according what I found in javadoc - is:
"public OperationStatus put(Transaction txn, DatabaseEntry key, DatabaseEntry data) throws DatabaseException"
and both this and the corresponding method for retrieves, are based on the same DatabaseEntry type, which allow only entry data on byte[] support.
What if I need to use Strings or int, or even char? I must do a special conversion from these types, to byte[], to use the database?
Thank you!

On the doc page (this is also in the download package),
http://download.oracle.com/docs/cd/E17277_02/html/index.html
see:
Getting Started Guide
Java Collections Tutorial
Direct Persistence Layer (DPL)
All of these describe how to use data types other than byte arrays.
--mark

HT1688 I am trying to find answers about how to use the earphones that came with my new iPhone 4s. Does this work similarly as a Bluetooth or do I need to still buy one. The printing in the manual is SOOO small, it is too hard to read!

Does anyone know how to use the earphones( plugs) that come with iPhones?
Mine is still fairly new and I am just learning how to use certain things.

They're pretty straightforward. You plug them into the headset jack (the hole on the top left of your phone). You put the buds in your ears. All sounds, except for the phone ringing will now come through the earbuds.

JNI - How to use the error reporting mechanism?

I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.

Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL;

How to use the sharing function with other pc on the Finder sidebar?

I discver my housemates' pc's names under "sharing" on the Finder sidebar. We all use the same wifi network at home. Neither they nor I have enabled anything so I'm just wondering what is that for and where am I able to control sharing options?
Also I can even access their iTunes libraries. How do these all work? Am I able to set any security options at all?

On the doc page (this is also in the download package),
http://download.oracle.com/docs/cd/E17277_02/html/index.html
see:
Getting Started Guide
Java Collections Tutorial
Direct Persistence Layer (DPL)
All of these describe how to use data types other than byte arrays.
--mark

How to use the text module in script

hi,
i script how to use the text modules and how to write the code in layout of the script?

Hi,
You canr use text modules in script. You have to use standard texts .
Standard text are maintained in SO10 transaction.
you can create translation text for other languages also . So based on logon language it will print translation text.
go to SO10
give textname it say Ztextname id as ST and language as EN
say create, then you will get editor there maintain your text and save it . then come back . Now change language (say for german DE) say create and eneter translation text and save it.
so now you have created a text called ztextname which you can use in your script.
Inorder to insert the texts in your script do as below
go to any window editor and select path
Insert->texts->symbols->standard symbols
then you will get popup in which you have to mention all the parameters that you have created earlier.
after inserting just change language EN to sy-langu
Reward points if useful
About text elements Sravan already given some informatiomn
Regards,
Nageswar

How to use the Bluetooth module natively in Parallels Desktop

link to the instructions on how to enable bluetooth natively in parallels:
http://www.mattiouz.com/blog/2007/04/13/how-to-use-the-built-in-mac-bluetooth-in -windows-under-parallels/
link to the .exe that installs the apple driver for the bluetooth module needed in parallels: http://www.mattiouz.com/download/AppleBluetoothInstaller.exe
now my bluetooth is accessible under parallels 3.0.5158. i scanned with a bluetooth netowrk scanner and i had no problems connecting to my treo 650.
i took my some time to find the info but @ last i found it;-)
Message was edited by: smokeonit

Hi,
You canr use text modules in script. You have to use standard texts .
Standard text are maintained in SO10 transaction.
you can create translation text for other languages also . So based on logon language it will print translation text.
go to SO10
give textname it say Ztextname id as ST and language as EN
say create, then you will get editor there maintain your text and save it . then come back . Now change language (say for german DE) say create and eneter translation text and save it.
so now you have created a text called ztextname which you can use in your script.
Inorder to insert the texts in your script do as below
go to any window editor and select path
Insert->texts->symbols->standard symbols
then you will get popup in which you have to mention all the parameters that you have created earlier.
after inserting just change language EN to sy-langu
Reward points if useful
About text elements Sravan already given some informatiomn
Regards,
Nageswar

Hello anyone know how to use the locked iphone outside USA

hello anyone know how to use the locked AT&T iphone 5 outside US. I'll go to Japan. Don't know if the phone can be used there.any idea will be appreciated.

You'll need to get it unlocked by ATandT to avoid paying huge roaming costs.
See: http://www.att.com/esupport/article.jsp?sid=KB414532&cv=820

How to use the result from a taglib?

Hi people.
I've been looking arround for some feedback on how to use the output generated by a taglib on jsp code but I haven't been able to find any.
Could somebody tell me how to do that please?

It works something like this:
The tab library consists of a class library and a tag libraray descriptor file. In your jsp header you include a taglib directive which associated athe TLD with a particular name prefix. Then you can include XML tags with that prefix and the tag library class to which they are connected will be invoked from the servlet that is generated from the JSP. This tag code can do pretty much anything, but usually what it mostly does is write HTML to the response stream. Opening tags and closing tags can both add whatever text they like to the stream which is sent to the client.
So including the tag in you JSP will usually suffice to cause generated output, it's up to the taglib.

How to use the Embedded PDF plugin

Hi all,
I have installed a plugin Embedded PDF.
Does anyone know how to used this for printing an interactive report??

Have you read the documentation? It is very clear, when reading how to implement the plugin, how it generates your PDF.... You have to copy the select that you are using in your report to the plugin...
Thank you,
Tony Miller
Webster, TX
Never Surrender Dreams!
JMS
If this question is answered, please mark the thread as closed and assign points where earned..

SQL QUERRy (how to use the SQVI)

Hi all,
can anyone explain the process and how to use the Tcode SQVI.....
thanks in advance
srinivas...

thanks for imm responce....
as per ur mail ...
If a report got created through SQVI Transaction it will not allows you to transport..
the same senario will effect to the Tcodes SQ01,SQ02,SQ03.....
could you please look into below my question also..can any one please responce to this,,,,
The below link will explain to genereate the normal or ALV report using ABAP query without any programming language.i have few questions......
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40bec8da-4cd8-2910-27a9-81f5ce10676c
1.here in this link pdf doc explained how to get the data in two tables usuing ABAP quesry,,,
is it possible for getting the data from more than two tables and how ,canone please guide me....
2.using ABAP query i got the ALV single grid report ,is it possible to get more than single grid usuingABAP query ....?
3.using ABAP query i got the ALV single grid report then how to give the print and how copy and paste in the edit pad....
note : the above PDF link step by step is helpfull for generating report using Tcodes like SQ01,SQ02,SQ03.
can anyone provide the similar type pdf documents for generating report using Tcode SQVI...?
thanks in advance
Srinivas...........

How to get the byte[] size dynamically from the StreamMessage object

Hi all,
Using JMS, I am receiving the FDF file as StreamMessage from the queue and attaching it to the PDF file which is present in the local system.
For that, I have written the code as follows:
{color:#0000ff} Message msg = jmsTemplate.receive();
if(msg !=null && msg instanceof StreamMessage)
StreamMessage message = (StreamMessage) msg;{color}
{color:#ff6600}//hardcoded the byte array size value
{color}{color:#0000ff} byte[] bytes = new byte[{color:#ff0000}856{color}];
System.out.println("read msg="+message.readBytes(bytes));{color}
{color:#0000ff}PdfReader pdfreader = new PdfReader("D:\\Managing_Workflows_No_Comment.pdf");
PdfStamper stamp = new PdfStamper(pdfreader, new FileOutputStream("D:\\12345.pdf"));
FdfReader fdfreader = new FdfReader(bytes);
stamp.addComments(fdfreader);
{color} {color:#0000ff} stamp.close();
{color}{color:#000000}The above code is working fine except with the hardcoded of {color:#ff0000}byte array{color}{color:#ff0000} size value{color} which is given in {color:#ff0000}RED{color} in color.
Can anybody know, {color:#000000}*how to get the byte[] size dynamically from the StreamMessage*{color} object ?
Any help would be highly beneficial for me !!!!
Thanks and Regards,
Ganesh Kumar{color}

When you create your stream message you could add an property to your message, something like streamSize that would contain the number of bytes in your stream message. Then you could get this property from the message before declaring your array.
Tom

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

How to using the JSP print the byte[] or byte?

Similar Messages

Maybe you are looking for