How to view ACCNTS payble reconaccount Line Item wise after cheking tick

I want to see the ACCOUNTS Payble RECONCILITION acoount LINE ITEM wise.
I had seen the GL Master and their I found that The LINE ITEM was not Checked.
later I had checked the Line Item Display, but Iam not able view the previous transactions Line Item Wise For that GL Account.
1. Kindly suggest me how I can see the Previous Line Items after cheking the Line Item Disply.
2. kindly Tell Me if I can Run any Programme.
3.If its so what programme I can run and how.
4. Is there any problem by checking the line item display to the GL account.
Thanks In Advance
I will definately reward the points
Akash Narayana

Hi,
1. Enable Line Item Display in GL master.
2. Block the GL for Posting in Company Code.
3. Run the Program RFSEPA01.
4. Check whether Line item details are available and then unblock the GL.
Regards
Hari

Similar Messages

How to delete the Cost center line item data

How to delete the cost center line item data of particular cost center and only one cost center is exisiting for that company code.
Is there any way to delete the line items in that cost center.
Can data archiving & deleting can help us..........
does it have any effect over other cost center data....
any input needed.........
regards
rajesh

Hi,
i found 2 reports for you:
1) CO_TOTAL_WRI - Archiving CO Totals Records
2) RKCOITW1 - Archiving CO Line Items: Write Program
from 2) is a linlk to customize archiv-parameters
-> start it with transaction se38 / sa38
A.

How to Count Number of completed line items in past 6 months / 12 months ?

How to Count Number of completed line items in past 6 months / 12 months ?
Hi,
I am trying to count "Number of Completed Line Items in Purchase Order Document" for my Key Figure ZPO_CNT.
Purchase Order document = ZEBELN
Line Item = ZEBELP.
I need to find and count if the Line Item has been received in the past 6 months from today and similarly in the past 12 months.
I have "Delivery Completed" field, ELIKZ.
So, based on this would I be able to calculate it in Query Designer?
If so, Please let me know how

Hello Deva
If youe want to calculate the completed line item for last 6 or 12 month then i think u will be displaying the query data for these montrhs...create a customer exit to give you date range and restric it in filter area....
Now Choose any of the below option
1. I would suggest to implement an additional key figure "counter" in cube and fill values with one for which delivery is completed.
Now use calculated key figure in Query Designer based on logic
IF counter = 1 THEN counter ELSE 0
OR
2. create a formula variable based on ELIKZ and use replacement path variable, it will display you no. of docs for which delivery is completed....
Award points if it solves your problem
Revert back in case of further assistance...
Thanks
Tripple k

How can I add a new line item for production order?

HI all,
How can I add a new line item for production order through BAPI/FM? Thanks in advance.

Hi Mil,
Unfortunetly SAP is not in front of me.
But if possible go to BAPI transaction , check for any production order's bapi for CHANGE purpose. Where you will be able to add your new line.
Reward if useful!

How to make reports on FI Line items

Hi all,
Let me know how to make reports on FI Line items especially drill down reports. suggest me steps for developing reports through Bex query designer. Am new in reporting on FI. How to make the drilldown reports. Plz let me know step by step.
Thanks,
Jack

Hi
Follw the steps
Step1
Lets take an example of ODS Accounts Payable: Line Items Technical Name: 0FIAP_O03
install all this 0FIAP_O03 ODS from the Business content.
For more details on FI Line item ODS
http://help.sap.com/saphelp_nw04/helpdata/EN/af/16533bbb15b762e10000000a114084/frameset.htm
Step2
After installing make sure that all the infoobjects and transfer rules and update rules are in active state
Step3
Now type the transaction code RRMX , you will get into the query designer
Step4
Select the Infoprovider from the above example 0FIAP_O03 . now you will arrive to the screen where you can see Rows and colums
Step5
Drag and drop the characteristic infoobject in to the row which is necesseayfor the report output
Step6
Drag and drop the Keyfigure infoobject into the column which is necesseayfor the report output
Step7
Now under Free characteristics draga and drop the charactor infoobject which you need to navigate in the reporting.
Note: Before dragging the objects in the freecharacteristic make sure that you need to check the navigation in the ODS level
Step8
Now save the report , when you save give the technical name of the report and save
now execute the report
Santosh
Edited by: Santhosh Nagaraj on Nov 15, 2009 1:35 AM

How can create and change PCA line items.

How can create and change PCA line items.
Please tell me the process and t.codes.

If you are in version < 4.7 ee then use 9KE0 tcode for passing profict center entries or trasnafer of balances from one profit center to another.
If you are in new GL regular FI entry like FB50 will hold good for account types "S"

Please let me know how to Count Number of completed line items in past 6 mo

How to Count Number of completed line items in past 6 months / 12 months ?
Hi,
I am trying to count "Number of Completed Line Items in Purchase Order Document" for my Key Figure ZPO_CNT.
Purchase Order document = ZEBELN
Line Item = ZEBELP.
I need to find and count if the Line Item has been received in the past 6 months from today and similarly in the past 12 months.
I have "Delivery Completed" field, ELIKZ.
So, based on this would I be able to calculate it in Query Designer?
If so, Please let me know how
Krishna

Hi Experts,
I dont have a defined Restricted key figure yet.
I have populated 0COMPL_DEL(Delivery Completed Indicator) and 0EBELN (Purchasing Document Number) and 0EBELP (Line Item Number in Purchasing Document) .
This is what I think how I need to calculate:
Number of completed line items in past 6 months:
If Delilvery Completed Indicator (0COMPL_DEL) = x, calculate No. of Line Items (ZPO_CNT) from 0CALDAY to 6 months
and
Number of completed line items in past 12 months:
If Delilvery Completed Indicator (0COMPL_DEL) = x, calculate No. of Line Items (ZPO_CNT) from 0CALDAY to 12 months
Please let me know if the logic is correct. If so, how I can create this in report

Line item wise Qty in Handling Unit Management

Dear All,
I am working and testing Handling Unit Management. As per the client requirement, he wants Multilevel Packaging (Manually) for materials as-
E.g. 100 Pieces will be packed in 1 Small Carton.
       100 Small Cartons will be packed in 1 Big Carton.
       10 Big Cartons will be packed in 1 Pallet.
Now while creating delivery I packed 2 materials separately. And in the item level it is showing as a whole, means total 1100 PC packed in 11 Small carton, 11 Small cartons packed in 5 Big cartons and 5 Big cartons packed in 2 Pallets. Please find the below screen shot.
Now when I check this delivery number in tables LIPS-VBELN, it is showing the entire qty of Small carton, Big carton and Pallets as 11, 5, 2 respectively. But actually it has show each material or line item wise No. of Small carton, Big carton and pallet used.
E.g. For 1st material Small Boxes = 5
                               Big Carton = 2
                               Pallet = 1
      For 2nd material Small Boxes = 6
                               Big Carton = 3
                               Pallet = 1
My question is, is there any table or logic where I can fetch all these details for all material that how many packaging material and qty has been used. Because in packing list the same needs to get printed each line item wise. I checked in VEPO and VEKP table as well but not getting any input.
Kindly help.
Regards:
Abhishek

First of all, why you don't have any quantities assigned against Small cartons, big cartons and pallets?
Well, for your requirement. As functional consultant, you should be smart enough to interpret & analysis the data when you have tables and data in hand. Anyways, in your case,
As Pallet is the highest level pack material.
Pass HU no of pallet in VEKP- EXIDV, in your case for one of the pallet, it is 1000013558.
For that you will get, Internal HU no. VEKP-VENUM, say, 86.
Pass VEKP-VENUM = VEPO-VENUM.
With that you will get Lower-level HU, VEPO-UNVEL, that will be internal HU No for Big Cartons & VEPO-VEANZ for packing material quantity.
Then pass VEPO-UNVEL = VEPO-VENUM, by this you will get internal HU No for Small Cartons in VEPO-UNVEL & VEPO-VEANZ for packing material quantity.
Again, pass VEPO-UNVEL = VEPO-VENUM, by this you will get following info:
Table - Fields
Field Desc
VEPO-VEPOS
HU item
VEPO-VBELN
Delivery
VEPO-POSNR
Delivery Item
VEPO-VEMNG
Packed quantities
Try and share your feedback.
Thanks, JP

Goods Receipt Value line item wise

Hi Experts,
My client wants show Goods Receipt Value line item wise at the time of GR entries.
He wants show GR Value before saving the GR document.
Please advise me how it is possible.
Thanks in advance,
Chandhu

and what will be the benefit of such request? do you think a receiver (warehouse personell) can valuate whether the Po price is correct maintained by a buyer?
Maybe it is better to create check reports for the buyers instead.
you can certainly check in a user exit if price is far away from the price maintained in material master and can issue a warning or even an error.

Fbl1n and fbl5n line item wise display the cutomer and vendor name

Hi,
My user is asking report for fbl5n and fbl1n line itemwise dispaly vendor and customer.See the report for one time vendor and customer name displaythe line item wise display in FBL!N/FBL5N. but not the display the regular vendors/customer.So one time table name BSEC
Please advise
Regards.
Edited by: yps y on Nov 13, 2008 1:26 PM

Hi,
line item reports FBL1N/FBL5N are reading the line items (wow, what a big surpise ) and displaying information on line item level.
As the vendor/customer name is NOT stored in the line items, you cannot display this in the lines (along with other item level information., like amount, posting key, doc.type, etc.). You may find a field called "Name 1) in the field catalog when configuring the ALV layout but this is empty for normal customers/vendors. It is only filled in for one time (Cpd) customers - the reason is as explained above: for these special accounts, the name IS stored on line item level (it varies from item to item),, that's why it can be read and displayed in the items.
Now how about normal customers/vendors?
You have to activate Business Transaction Event 1650 and implement a simple code so that depending on the account type (D = customer, K = vendor), you get the business partners name from table KNA1 / LFA1 and put it into field Name1.
Hope that helps, points welcome
Csaba

Auc to Main Asset Line Item wise details

Hi Expert,
i have find and read number of thread regarding details of converted from AUC asset into Main Asset. in sap there is no any standard report where i got the details like AUC asset converted into Main Asset.
scenario is , we have create Capital PO say 5 lacks account assignment category A. under purchase we have given Internal order and Auc Asset No.2005001.
after received the goods. entry has been made.
now we have book some expenses against AUC PO say Rs.25000+10000+3000 =38000/- Total extra so now while settle the AUC asset to main asset amount would be 5,00,000+38000= 5,38,000/-.
in above process we do settle thru KO88 . AIAB and AIBU.
kindly help where which table we can see the line item details i.e Rs.38000 coz not any standard report to achieve the above process.
also give me the idea of Zreport. to achieve.
Thanks in advance.
Kind regards
Pranav Kr. Gupta

Mukthar sir,
we have already transferred from auc asset to Main assset. now we want to know line item wise how much cost occurred while AUC Asset time . say Rs.5,50,000/- same amount will come in Main asset number.
only accounting entry showing below
70 : GL No. 211200 Furniture main asset A/c No.i.e 2005009 5,50,000
75 GL No. 217300 WIP Others AUC Asset A/c i.e No. 3210000 5,50,000
Note : we want details of 5,50,000/- how many line items generated .
if i give on selection screen Main asset Number system will suppose to show the details of Rs. 5,50,000/- line item wise along with AUC Asset Number.
Kindly help . or if any standard report to get this information , like if i give main asset Number then system automatically show the details of AUC to Main Asset.
Thanks
Pranav Kr. Gupta

Line item wise exchange rate in sales order and same in billing

Hi,
The client requirement is that to have different exchange rate at line item level in sales order, for multiple sales order, we have different exchange rate in the line items wise, we do the collective billing through VF04. System is picking in the billing document, but not in the accounting document.
The accounting entry should be posted separate exchange rate wise. How to map the same.
Can anyone throw light on this issue.?
Regards,
Satya

Go through this thread
Difference in Billing Exchange rate(VBRP-KURSK) w.r.t OB08
G. Lakshmipathi

Line item wise exchange rate differences in GR

Dear All,
Client does one GR in USD as document currency on a particular date and posted the transaction, while making the conversion to local currency INR system calculating the total line item values correctly as per the exchange rate maintained in the table but when we calculating line item wise amounts, it showing differences to the maintained rate.When i checked for the material master, price control maintained as V. Is tht when doing GR system recaluclating the values in material master and if it so how this much differences showing for each line items...
Pls guide me on this issue...
Regards,
Balaji.c

Dear All,
Anybody can guide me on this issue, awaiting for ur reply at earliest...
Regards,
Balaji.c

Line item restriction after billing in sales order ?

Hi All
i am new to this forum and this is my first question going to put up
After doing the billing , i am able to add another line item in the sales order via va02 , so i want know how can i restrict to add line item after completing whole cycle in sales order ?
Regards
Vincent

Irrespective of whether it is an order related or delivery related, you can add en number of linei tems in sale order which is a standard functionality. If you want to restrict, you have to go with user exit. But there is nothing wrong in adding new line items via VA02.
G. Lakshmipathi

RV document posting line item wise in FBL5N tcode

Dear Experts,
I had posetd the Invoice to accounts with 3 line items. While checking the FBL5N report the Rv doument no is displaying 3 items i.e. repective line item wise prices are displayed. But my requirement is i want to check the doument wise i.e. all line items rolling up to singlke price. How to achied this.
Regards
abhi

Hi Lakshmi,
We are using ECC 6.0 Version i am unable to find the path as per your reply wherein Perform Document Summarization for Sales and Distribution is available in PERIODIC PROCESSING> Integration> SD. But what settings needs to be done when i check the Perform Document Summarization for Sales and Distribution system is asking for Ref Transaction and when i check Billing document header it is in display mode with New Entries required.
My requirement is i am posting a Invoice with 2 line items ( service related Billing). Please find the below report in FBL5N
6700147 6700147 RV 22.07.2009 22.07.2009 123.00
6700147 6700147 RV 22.07.2009 22.07.2009 222.00.
But the accounting document No is same. i need one A/c No 67000147 and the total amount has 345.
Regards
jayanth

How to view ACCNTS payble reconaccount Line Item wise after cheking tick

Similar Messages

Maybe you are looking for