How to view DHCP lease from ISP on a 2811

I have a remote site on a 2811 IOS 12.4(15). Interface FA 0/0 faces the ISP and is set for DHCP. What command can I run to see all of the information given out with the IP lease from the ISP? I need to find out what the IP address of the DNS servers are.
All responses appricated.
Cheers,
Frederick Sawyer

Hi,
to see traffic he can also use the RITE feature: http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/ht_rawip.html
Regards.
Alain
Don't forget to rate helpful posts.

Similar Messages

Monitoring DHCP leases from vrf tunnels

Hello,
I am looking to monitor dhcp leases from vrf tunnels on a 4510R switch and be notified when a lease is handed out Does anyone have any suggestions on the best way to accomplish this?
Thanks!

See http://www.cisco.com/en/US/docs/ios/12_4t/12_4t4/ht_iimib.html . Assuming you're running the correct version of code, you can get VRF-aware CISCO-IPSEC-FLOW-MONITOR-MIB and CISCO-IPSEC-MIB support. You will need to make sure you have configured your device to allow for VRF-based SNMP polling. The VRF instances will not show sum totals for the system. To get that, you will need to poll using a non-VRF community string.

BlackBerry 10 - how to view completed Tasks from within Calendar

How to view completed Tasks entered in Remember, but viewing not just active tasks but completed tasks from within the Calendar? Thank you.

Hi sandy1729,
Welcome to Apple Discussions
You don't say which iPod it is but I have a nano - to check the battery indicator when charging I turn the nano off, then the battery indicator fills the whole screen instead of just the bit at the top right.
See the pictures here:
http://docs.info.apple.com/article.html?artnum=60970
Regards,
Colin R.

Some Clients wont get DHCP Lease from xServe

Hello,
today we got some strange Network Problems. Some Imacs dont get a IP Adress from our Xserve (10.5). The Xserve tries to offer a adress but the Client wont get them.
The log only says "offer send to xyz-hostname ip-adress"
The strange thing is, when i spoof the Mac Adress on the imac. I get a dhcp lease.
Is there some "Cache" we can reset ? Or simply reboot the Xserve ?
thx

Sure, possibly relevant parts:
errdisable recovery cause udld
errdisable recovery cause bpduguard
errdisable recovery cause security-violation
errdisable recovery cause channel-misconfig (STP)
errdisable recovery cause pagp-flap
errdisable recovery cause dtp-flap
errdisable recovery cause link-flap
errdisable recovery cause gbic-invalid
errdisable recovery cause l2ptguard
errdisable recovery cause psecure-violation
errdisable recovery cause dhcp-rate-limit
errdisable recovery cause vmps
errdisable recovery cause storm-control
errdisable recovery cause arp-inspection
spanning-tree mode rapid-pvst
spanning-tree loopguard default
spanning-tree portfast bpduguard default
spanning-tree extend system-id
vlan internal allocation policy ascending
ip ssh time-out 60
ip ssh authentication-retries 5
ip ssh logging events
ip ssh version 2
interface GigabitEthernet1/0/1
description Gi1/0/1 to CAT-CORE
switchport trunk encapsulation dot1q
switchport mode trunk
interface GigabitEthernet1/0/4
description Gi1/0/4 to RADIUS_serv
switchport access vlan 240
switchport mode access
spanning-tree portfast
spanning-tree bpdufilter enable
spanning-tree bpduguard enable
interface GigabitEthernet1/0/8
description Gi1/0/8 to DHCP_serv
switchport access vlan 240
switchport mode access
spanning-tree portfast
spanning-tree bpdufilter enable
spanning-tree bpduguard enable
interface GigabitEthernet1/0/11
description Aironet 1141 AIRONET-MO-1
switchport trunk encapsulation dot1q
switchport trunk native vlan 240
switchport trunk allowed vlan 240-246,248,249
switchport mode trunk
interface Vlan240
description Admin_Vlan
ip address 192.168.240.244 255.255.255.0
ip default-gateway 192.168.240.1
ip classless
no ip http server
ip http secure-server

How to view motion graphics from websites on iphone 4 ?

07/27/2013
Hello, can anyone provide information as to viewing motion graphics from websites on iphone4 ? -- when I view a website; I can see still pictures, words, numbers, colors ,etc... EXCEPT for the motion graphics. The motion graphics does not show-up at all from the websites on the iphone4. The websites that I am having prolems viewing are the ones that are animated (cartoon-ish) in motion.
Example: I can see an animated still picture of a man driving a car, but; I cannot see the animated motion graphics of the man actually turning the steering wheel, moving his head while looking in different directions while driving, the car wheels turning, etc... on the same website being viewed - the animated motion graphics will not show-up at all on the iphone4.
I would like to know if there is a mobile app from the apple archive, or any type of mobile software to install to be able to view the motion graphics and, if so; I would appreciate any feedback pertaining to this matter.
Thank You.

I actually purchased GoodReader because it is easy to transfer files without iTunes. I dislike the file sharing through iTunes. You can use a Mac or PC. Once I was in the app I clicked the "Wi-Fi" symbol which brings me to "WiFi-transfer." It will show this --
"WiFi status: ON
Use one of the following addresses exactly as you see them
1. IP-address: http://192.168.0.98:8080 <-- Local LAN address the iPhone is broadcasting on.
2. Bonjour-address http://Myname-iPhone.local:8080"
All you have to do is type one of those addresses into your browser. (Safari, etc.)
It will take you to a page that has iPhone Connection and a list of options. You can either create a new directory within the application or use an existing one to upload a text file. It's rather simple, you just select "Choose a file to upload" > Select your file > Press upload > Start the app and see your text/pdf/whatever file.
You can also connect to a server to download a text file, browse the web, or enter a url. I see it also has an ICloud folder which I'm not sure if it integrates with Apple's iCloud or not, I think it does. I'm not affliated with the app and I'm not saying you have to buy it, I'm just a happy user.
If you don't want to buy this app let me know I'll keep looking for a free or cheaper one for you if you want.

How to view word document from report?

We have one table with blob datatype and manage to save some document by creating form on this talbe. Through form we can see the document as default functionality of portal forms. But now we want to allow user to view this document from report as well.
We tried one Solution on WWDOC_DOCUMENT and its working for WWDOC_DOCUMENT table but we want to display from our user table's word document. ( Any relation between user table and WWDOC_DOCUMENT table of PORTAL30).
Thanks

Found way around but facing another problem. Its worked fine for first time (means when i inseted documents and created report on same table).
But subsequent session it giving HTTP 404 file not found error.
Any clue?

How to view youtube videos from iphone 4 to tv using composite AV cable

Hi,
Can any one please help me as to how to view youtube online videos on TV through my iphone 4. I tried connecting the iphone 4 and TV with a composite AV cable however I can hear only the audio but am not able to view the videos.

It seems so stupid that you cant sort videos by date. Some please tell is that we are idiots and tell us how? And if u simply cant, well a big shout out goes to google for being right on top of things. I hate google! Company is too big and they cant keep up apparently. Sooo much junk on you tube and they cant give us filter and sort options on the most widely used tablet on the market.? Gawd pleeeeze tell me im an idiot!

How to replace DHCP server from domainA with DHCP from domainB?

Hello fellow Administrators,
We have one remote site with one subnet. There's domainA domain controller and about 100 domainA's client computers in that subnet. We're about to send 100 domainB's client computers there as well.
There's also domainA's DHCP server running on the same subnet. DHCP scope options include domainA's domain name, gw and domainA's DNS server addresses.
DomainA and DomainB belongs to separate forests and there's two-way trust between them. DomainA DNS has stubzone for DomainB and DomainB has stubzone for domainA. That's how
clients can resolve hostnames of other domain.
All domainA's clients in remote site will be replaced gradually with domainB's client computers, but this can take a long time.
I want to note, that I cannot create second subnet for domainB at the moment.
At some point, we need to deploy DHCP server to domainB's member server in the remote site. What are the steps I should take to replace existing domainA's DHCP server with domainB's DHCP server while still allowing clients from domainA and domainB to successfully
find domain controller of their own domain and being able to resolve hostnames from both domains?

When the devices on your network first request an IP address or reach the end of their leases (or you force them to check their lease is still valid) they will simply
broadcast a request for a DHCP server, and will accept an offer from the first DHCP server
to reply.
Multiple DHCP servers PT 1: Spanning multiple subnets.
If you have several VLANs or physical network segments that are separated into different subnets, and you want to provide a DHCP service to devices in all those subnets then there are two ways of doing this.
If the router / layer 3 switch separating them can act as a BOOTP/DHCP relay agent, then you can continue to keep all your DHCP server(s) in one or two central parts of your network and configure your DHCP server(s) to support multiple ranges of addresses.
In order to support this, your router or layer 3 switch must support the BOOTP relay agent specification covered in section
4 of RFC 1542.
If your router does not support RFC 1542 BOOTP relay agents, or if some of your network segments are geographically dispersed over slow links, then you will need to place one or more DHCP server in each subnet. This ‘local’ DHCP server will only serve its own
local segment’s requirements, and there is no interaction between it and other DHCP servers. If this is what you want then you can simply configure each DHCP server as a standalone server, with the details of the address pool for its own subnet, and not worry
about any other DHCP servers on other parts of the network. This is the most basic example of having more than one DHCP server on the same network.
http://www.arabitpro.com

HOW TO VIEW BLUETOOTH IMAGES FROM A LAPTOP?

MY COUSIN SEND 6 PICTURES FROM HER LAPTOP TO MY IPAD AIR 2 BUT WE DONT KNOW WHERE THE PICTURES GOES, WE DIDNT SEE THE 6 PICTURES FROM THE PHOTOS.. SO HOW AND WHERE CAN WE VIEW IT?

Did she use Airdrop to transfer the pictures ? If so the photos should be in the Photos app.
Share content with AirDrop from your iPhone, iPad, or iPod touch - Apple Support

How to view aperture library from another computer on network?

Hi,
I'd like to simply view (not edit) my aperture library from another computer on my home network. The aperture library resides on a mac pro, and I'd like to see the images on a macbook pro to show family members. On the surface, this seems like a simple concept - as Apple TV can do this with home sharing. Further, itunes can share it's library in this manner. Is this possible?
thank you,
T

You don't mention which OS you're using and I understand that Lion has changed some of the sharing features but what you are looking to do is doable.
Be warned that accessing an Aperture library over a network is slow and definitely not something you want to do if editing except in an emergency and you want to make triple sure that only one user is accessing the library at a time. But I regularly access libraries over wireless when I'm to lazy to walk across the house and need to check somthing out.
If you are using Snow Leopard go into System preferences->Sharing and tune on file sharing on the the Mac Pro. If you have the same user name on both systems you should have no problem accessing the library from the MBP.
If you're on Lion, you'l need to lok up how to enable file sharing. I haven't swithced so I can;r help you there.
good luck

How to view database values from server to client

hi friends
i have database in server side, i am storing values to the database from client side machine through remote methods. But now i need to view the database values from the server side. how to do this using RMI.
Plz give me suggestion.
by
vinod

Why do you have to use RMI for this task? That way you've got to write both a client and a server. Just use JDBC directly from the server.

How to view all procedures from commandprompt

Hai All,
we have query select * from tab; in oracle
to view all tabels in database.Like this how can we view all procedures

The oracle specific response:
In oracle, select * from tab is actually only included for backwards compatibility (With Oracle 5)
It is better to use the view USER_TABLES
ie select * from user_tables
For stored procedures:
select * from user_procedures
More applicable to the Java world, and also database independant, check out the class java.sql.DatabaseMetaData
It has methods
getTables() and getProcedures() that should give you much the same info, just directly in java.
Cheers,
evnafets

How to view iPhoto photos from WDTV live

I use WDTV Live and would ideally like to be able to use it to view pictures via streaming from iPhoto on my MBP. Is this possible, and if so, how do I do it?
Thanks

I doubt it unless it understands the sturcture of the iPhoto library - a good source of support might be http://wdc.com/en/products/products.aspx?id=330
It sounds like you can export photos and then stream them
LN

How do view older emails from my laptop on my iPad?

How do I view previously opened emails from my laptop on my iPad??

Hi,
Who is your email provider, e.g: Hotmail (now outlook), Gmail etc?
Regards,
Steve

Very Urgent:How to view an object from different angles around 360degrees

Hello
My problem is that i want to view an object which is drawn on the canvas3d in the simpleuniverse from all angles...i mean around 360degrees.
Suppose i have a front view... and i wan to look at the view..at 30 degree ..
plz help me
this is urgent
regards
seema

Thanks Titus76. Your technique works. But one more problem. I want to rotate my all the three axis through some specified angle. In other words I want to rotate my viewport. In previous case if I implement ur suggestion only my object rotates, but not axis'. Now I want to rotate my all 3 axis. So that when I rotate, all my three axis rotate. This way my objects should obviously rotate. How will I do that?
Regards

How to view DHCP lease from ISP on a 2811

Similar Messages

Maybe you are looking for