How to view response time for each execution in OEM 12c Cloud Control

Hi All,
I want to view response time of each execution for my SOA composite in OEM 12c Cloud Control. Can anyone tell me how can I achieve that?
Thanks in Advance!!

You should open an SR and support can assist you with it. The only current case where that feature is known to not work is in the case where the Dehydration Store is running on RAC. Otherwise, it should be possible to get it to work. The main thing is that you need to have DB configuration properties (host, port, sid) that have a 3-way string match between the JDBC data source configuration in the WLS server, the JDBC properties you add to the Monitoring Properties of the SOA Infrastructure target, and the connect settings of the Database target in EM that matches to the dehydration DB.
If there isn't a match in all 3, the Dehydration Diagnostics page will not work. But again, to look into your specific setup, you should file an SR and work with support.

Similar Messages

How to view messages in Jms queue from OEM 12c Cloud Control

Hi All,
How can I view messages in a Jms queue from OEM 12c Cloud Control without logging into WebLogic Administration Console?
Thanks in Advance!!

EMCC 12c gets down to the JMS message queue/topic level in regards to the metrics being collected. It doesn't provide a view into the actual messages themselves. Are you trying to capture/track messages with a particular payload?

How to view Dehydration Store Performance in OEM 12c Cloud Control

Hi All,
I have installed OEM 12c Cloud Control.I want to view dehydration store performance for my fusion middleware domain.Can anyone please suggest me how can I achieve this?
I have added the database, where soa schemas are created, as a monitored target in OEM 12c Cloud Control. Also have added Fusion middleware domain for which I want to view dehydration store management.
Thanks in Advance!!
Edited by: Roshni Shankar on Sep 19, 2012 5:26 AM

You should open an SR and support can assist you with it. The only current case where that feature is known to not work is in the case where the Dehydration Store is running on RAC. Otherwise, it should be possible to get it to work. The main thing is that you need to have DB configuration properties (host, port, sid) that have a 3-way string match between the JDBC data source configuration in the WLS server, the JDBC properties you add to the Monitoring Properties of the SOA Infrastructure target, and the connect settings of the Database target in EM that matches to the dehydration DB.
If there isn't a match in all 3, the Dehydration Diagnostics page will not work. But again, to look into your specific setup, you should file an SR and work with support.

How to add a weblogic cluster in OEM 12c Cloud Control

Hi All,
I have created one SOA domain with a two node cluster. My cluster contains two servers; one on each machine. Now I want to monitor my domain with OEM 12c cloud control. I my OEM 12c cloud control I can add my weblogic domain but if that domain contains a cluster and in the cluster one server must be residing on the some other machine. Then how exacly in OEM 12c I can a add a target which is of type weblogic domain and contains a weblogic clusters with two servers?
Please advise on this..!!
Thanks in advance!!

EM12c can take care of multiple hosts during discovery and you don't have to do anything special, however, for SOA its advisable to have local agents monitor their individual hosts; hence, you should first discover both your hosts in EM first by pushing agents to each of the hosts using Setup>Add Targets>Add Targets Manually and then discover the SOA domain. You local agents will be picked up automatically that will eventually monitor your 2 nodes/servers.

How to inegrate OID with OEM 12c Cloud Control

Hi All,
Can anyone please tell me how can I integrate OID with OEM 12c Cloud Control. As we can integrate our weblogic administration console with OID,is it possible to integrate OEM cloud control with OID?
Thanks in Advance!!

Hi,
Please find the URL below:
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/security.htm#BABGAGIJ
Following section will provide you the information for OID intergration:
13.2.5 Oracle Internet Directory (OID)
You can implement an OID-based authentication scheme to have Enterprise Manager authenticate users against the OID.
Running the emctl config auth oid command on the OMS creates a WebLogic authentication provider of type OracleInternetDirectoryAuthenticator that uses the configuration parameter values specified by the command. Any configuration values not specified retain the default values. Tuning and modification of advanced OID configuration parameters is carried out through the WebLogic Server Administration Console and not the emctl config auth oid command.
Prerequisites
Oracle Internet Directory LDAP server is set up and running.
Run the emctl config auth oid command on each OMS.
emctl config auth oid -ldap_host <ldap host> -ldap_port <ldap port> -ldap_principal <ldap principal> [-ldap_credential <ldap credential>] [-sysman_pwd <pwd>] -user_base_dn <user base DN> -group_base_dn <group base DN>
where:
ldap_host: LDAP host name
ldap_port: LDAP port
ldap_principal: The distinguished name (DN) of the LDAP user the WebLogic server should use to connect to the LDAP server.
ldap_credential: Password for the user specified by ldap_principal.
user_base_dn: The base distinguished name (DN) of the tree in the LDAP directory that contains users.
group_base_dn - The base distinguished name (DN) of the tree in the LDAP directory that contains groups.
Example:
emctl config auth oid -ldap_host "ldaphost" -ldap_port "3060" -ldap_principal "cn=orcladmin" -user_base_dn "cn=users,dc=us,dc=oracle,dc=com" -group_base_dn "cn=groups,dc=us,dc=oracle,dc=com" -ldap_credential "my_ldap_password" -sysman_pwd "my_sysman_password"
Stop the OMS.
emctl stop oms -all
Restart the OMS.
emctl start oms
Note:
For Enterprise Manager deployments consisting of multiple OMS instances, emctl config auth oid must be run on each OMS. Each OMS must be restarted in order for changes to take effect.
Testing the OID Configuration
Use the WebLogic Server Administration Console (Users and Groups tab) to check whether the OID configuration has been successful. To navigate to this tab, select Home/Summary of Security Realms/myrealm/Users and Groups. From the Users and Groups tab, you should see users and groups showing up from the OID.
Best Regards,
Venkat

How to reduce the time for each clips up to 0,04 seconds?

Hi, I'm trying to realize my first time laps. I've need to reduce the time for each clips up to 0,04 seconds, but it seems that the minimum time is 0,1 second. There's a solution?

And use a zip file. Many people can't open RARs.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Can i insert an image in the View responses tab for each formula ?

In the View responses tab, i would like to insert an image as a thumbnail for each formula to identify my products for a multiple products survey. Is it possible ?

Hi;
There is no support for displaying an image or thumbnail in the View Responses table.
Thanks,
Josh

Collaboration - how to reduce response time for Instant Messaging

Hello Experts,
I have enabled Collaboration link in the masthead of Ajax Framework Page by following the steps mentioned in the link Activating the Link for Launching the Collaboration Launch Pad.
I then activated services for real time collaboration in Ajax Framework Page referring to the link Activating Services for Real-Time Collaboration.
Following this I activated synchronous collaboration service types with the help of Activating Synchronous Collaboration Service Types.
In addition to the above steps I also followed this thread (Standard Services Instant Messaging Doesn't Work - Portal 7.3) and did the below changes in PCD Inspector:
# Browse into: portal_content -> every_user -> general -> frameworkpage
# Open com.sap.portal.toolAreaiView with option "PropEditor"
# Select the property: "EnableRtcSessionManager"
# Select the link "edit" Change the property value to "true"
On doing the above configurations I am able to open Collaboration Launchpad and send Instant Messages to users in my Contacts.
However what I have observed is that when I open an Instant Messaging window and type in some message and send it to a user, it takes between 70-90 seconds for the message to appear on the user's system, which is quite a long time considering it is an instant message. Is this normal behavior for instant messaging? Are there any other parameters/configurations that can be done to reduce this time taken for instant messages to get sent between users?
We are running NW 7.30 SP09 portal.
Regards,
Saurabh

Hi Saurabh,
Refer this link [http://help.sap.com/saphelp_nw73/helpdata/en/48/01a15984ff4aa5e10000000a421937/frameset.htm] and check thePollingIntervalBasis in NWA depending upon the no. of clients.

How to find the Response time for a particular Transaction

Hello Experts,
Am implementing a BAdI to achieve some customer enhancement for XD01 Transaction . I need to confirm to customer that after the implementation and before implementation what is the response time of the system
Response time BEFORE BAdI Implementation
Response time AFTER BAdI Implementation
Where can i get this.
Help me in this regard
Best Regards
SRiNi

Hello,
Within STAD, enter the time range that the user was executing the transaction within as well as the user name. The time field indicates the time when the transaction would have ended. STAD adds some extra time on using your time interval. Depending on how long the transaction ran, you can set the length you want it to display. This means that if it is set to 10, STAD will display statistical records from transactions that ended within that 10 minute period.
The selection screen also gives you a few options for display mode.
- Show all statistic records, sorted by star
This shows you all of the transaction steps, but they are not grouped in any way.
-Show all records, grouped by business transaction
This shows the transaction steps grouped by transaction ID (shown in the record as Trans. ID). The times are not cumulative. They are the times for each individual step.
-Show Business Transaction Tots
This shows the transaction steps grouped by transaction ID. However, instead of just listing them you can drill from the top level down. The top level will show you the overall response time, and as you drill down, you can get to the overall response time.
Note that you also need to add the user into the selection criteria. Everything else you can leave alone in this case.
Once you have the records displayed, you can double click them to get a detailed record. This will show you the following:
- Breakdown of response time (wait for work process, processing time, load time, generating time, roll time, DB time, enqueue time). This makes STAD a great place to start for performance analysis as you will then know whether you will need to look at SQL, processing, or any other component of response time first.
- Stats on the data selected within the execution
- Memory utilization of the transaction
- RFCs executed (including the calling time and remote execution time - very useful with performance analysis of interfaces)
- Much more.
As this chain of comments has previously indicated, you are best off using STAD if you want an accurate indication of response time. The ST12 (combines SE30 ABAP trace and ST05 SQL trace) trace times are less accurate that the values you get from ST12. I am not discounting the value of ST12 by any means. This is a very powerful tool to help you tune your transactions.
I hope this information is helpful!
Kind regards,
Geoff Irwin
Senior Support Consultant
SAP Active Global Support

To Check the execution time for each transaction.

Abapers,
How to find out the process time for each transaction eg.order entry,shippng,billing, etc in SAP.
TIA,
sinthu

Hi,
By default you can see the execution time at right side corner of sap session.
You can use SE30 to get in to more details like database time , abap time etc...
Hope it helps...
Regards,
Vijay

Strange response time for an RFC call viewed from STAD on R/3 4.7

Hello,
On our R/3 4.7 production system, we have a lot of external RFC calls to execute an abap module function. There are 70 000 of these calls per day.
The mean response time for this RFC call is 35 ms.
Some times a few of them (maybe 10 to 20 per day) are way much longer.
I am currently analysing with STAD one of these long calls which lasted 10 seconds !
Here is the info from STAD
Response time :                10 683 ms
Total time in workprocess : 10 683 ms
CPU time :                               0 ms
RFC+CPIC time :                       0 ms
Wait for work process           0 ms
Processing time           10.679 ms
Load time                            1 ms
Generating time                   0 ms
Roll (in) time                        0 ms
Database request time         3 ms
Enqueue time                      0 ms
Number      Roll ins            0
                 Roll outs           0
                 Enqueues         0
Load time   Program             1 ms
                  Screen              0 ms
                 CUA interf.          0 ms
Roll time    Out                 0 ms
                  In                  0 ms
                Wait                0 ms
Frontend    No.roundtrips       0
                  GUI time            0 ms
                  Net time            0 ms
There is nearly no abap processing in the function module.
I really don't uderstand what is this 10 679 ms processing time especially with 0 ms cpu time and 0 ms wait time.
A usual fast RFC call gives this data
23 ms response time
16 ms cpu time
14 ms processing time
1 ms load time
8 ms Database request time
Does anybody have an idea of what is the system doing during the 10 seconds processing time ?
Regards,
Olivier

Hi Graham,
Thank you for your input and thoughts.
I will have to investigate on RZ23N and RZ21 because I'm not used to use them.
I'm used to investigate performance problems with ST03 and STAD.
My system is R/3 4.7 WAS 6.20. ABAP and BASIS 43
Kernel 6.40 patch level 109
We know these are old patch levels but we are not allowed to stop this system for upgrade "if it's not broken" as it is used 7/7 24/24.
I'm nearlly sure that the problem is not an RFC issue because I've found other slow dialog steps for web service calls and even for a SAPSYS technical dialog step of type <no buffer>. (what is this ?)
This SAPSYS dialog step has the following data :
User : SAPSYS
Task type : B
Program : <no buffer>
CPU time                       0 ms
RFC+CPIC time              0 ms
Total time in workprocs    5.490 ms
Response time               5.490 ms
Wait for work process           0 ms
Processing time             5.489 ms
Load time                            0 ms
Generating time                   0 ms
Roll (in+wait) time                0 ms
Database request time          1 ms ( 3 Database requests)
Enqueue time                       0 ms
All hundreds of other SAPSYS <no buffer> steps have a less than 5 ms response time.
It looks like the system was frozen during 5 seconds...
Here are some extracts from STAD of another case from last saturday.
11:00:03     bt1fsaplpr02_PLG RFC     R     3     USER_LECKIT     13     13     0     0
11:00:03     bt1sqkvf_PLG_18      RFC     R     4     USER_LECDIS     13     13     0     0
11:00:04     bt1sqkvh_PLG_18      RFC     R     0     USER_LECKIT     19     19     0     16
11:00:04     bt1sqkvf_PLG_18      RFC     R     4     USER_LECKIT     77     77     0     16
11:00:04     bt1sqkve_PLG_18      RFC     R     4     USER_LECDIS     13     13     0     0
11:00:04     bt1sqkvf_PLG_18      RFC     R     4     USER_LECDIS     14     14     0     16
11:00:05     bt1sqkvg_PLG_18      RFC     R     0     USER_LECKIT     12     12     0     16
11:00:05     bt1sqkve_PLG_18      RFC     R     4     USER_LECKIT     53     53     0     0
11:00:06     bt1sqkvh_PLG_18      RFC     R     0     USER_LECKIT     76     76     0     0
11:00:06     bt1sqk2t_PLG_18      RFC     R     0     USER_LECDIS     20     20     0     31
11:00:06     bt1sqk2t_PLG_18      RFC     R     0     USER_LECKIT     12     12     0     0
11:00:06     bt1sqkve_PLG_18      RFC     R     4     USER_LECKIT     13     13     0     0
11:00:06     bt1sqkvf_PLG_18      RFC     R     4     USER_LECKIT     34     34     0     16
11:00:07     bt1sqkvh_PLG_18      RFC     R     0     USER_LECDIS     15     15     0     0
11:00:07     bt1sqkvg_PLG_18      RFC     R     0     USER_LECKIT     13     13     0     16
11:00:07     bt1sqk2t_PLG_18      RFC     R     0     USER_LECKIT     19     19     0     0
11:00:07     bt1fsaplpr02_PLG RFC     R     3     USER_LECKIT     23     13     10     0
11:00:07     bt1sqkve_PLG_18      RFC     R     4     USER_LECDIS     38     38     0     0
11:00:08     bt1sqkvf_PLG_18      RFC     R     4     USER_LECKIT     20     20     0     16
11:00:09     bt1sqkvg_PLG_18      RFC     R     0     USER_LECDIS     9 495     9 495     0     16
11:00:09     bt1sqk2t_PLG_18      RFC     R     0     USER_LECDIS     9 404     9 404     0     0
11:00:09     bt1sqkvh_PLG_18      RFC     R     1     USER_LECKIT     9 181     9 181     0     0
11:00:10     bt1fsaplpr02_PLG RFC     R     3     USER_LECDIS     23     23     0     0
11:00:10     bt1sqkve_PLG_18      RFC     R     4     USER_LECKIT     8 465     8 465     0     16
11:00:18     bt1sqkvh_PLG_18      RFC     R     0     USER_LECKIT     18     18     0     16
11:00:18     bt1sqkvg_PLG_18      RFC     R     0     USER_LECKIT     89     89     0     0
11:00:18     bt1sqk2t_PLG_18      RFC     R     0     USER_LECKIT     75     75     0     0
11:00:18     bt1sqkvh_PLG_18      RFC     R     1     USER_LECDIS     43     43     0     0
11:00:18     bt1sqk2t_PLG_18      RFC     R     1     USER_LECDIS     32     32     0     16
11:00:18     bt1sqkvg_PLG_18      RFC     R     1     USER_LECDIS     15     15     0     16
11:00:18     bt1sqkve_PLG_18      RFC     R     4     USER_LECDIS     13     13     0     0
11:00:18     bt1sqkve_PLG_18      RFC     R     4     USER_LECDIS     14     14     0     0
11:00:18     bt1sqkvf_PLG_18      RFC     R     4     USER_LECKIT     69     69     0     16
11:00:18     bt1sqkvf_PLG_18     RFC     R     5     USER_LECDIS     49     49     0     16
11:00:18     bt1sqkve_PLG_18     RFC     R     5     USER_LECKIT     19     19     0     16
11:00:18     bt1sqkvf_PLG_18     RFC     R     5     USER_LECDIS     15     15     0     16
The load at that time was very light with only a few jobs starting :
11:00:08 bt1fsaplpr02_PLG RSCONN01                     B 31 USER_BATCH     39
11:00:08 bt1fsaplpr02_PLG RSBTCRTE                     B 31 USER_BATCH     34
11:00:08 bt1fsaplpr02_PLG /SDF/RSORAVSH                B 33 USER_BATCH     64
11:00:08 bt1fsaplpr02_PLG RSBTCRTE                     B 33 USER_BATCH     43
11:00:08 bt1fsaplpr02_PLG RSBTCRTE                     B 34 USER_BATCH     34
11:00:08 bt1fsaplpr02_PLG RSBTCRTE                     B 35 USER_BATCH     37
11:00:09 bt1fsaplpr02_PLG RVV50R10C                    B 34 USER_BATCH     60
11:00:09 bt1fsaplpr02_PLG ZLM_HDS_IS_PURGE_RESERVATION B 35 USER_BATCH    206
I'm thinking also now about the message server as there is load balancing for each RFC call ?
Regards,
Olivier

How to get multiple output formats for each execution of the report?

Hi,
Is it possible to get multiple output formats for each execution of the report? If so can you provide some details?
Thanks

In Reports 6i, Reports Distribution was introduced. This allows you to run the report once and output to a number of destinations with a different format. It also allows you to distribute individual sections within a report to different destinations in different formats.
The Destinations for a Report to distribute to are defined either in a distribution file and passed on the command line or inside of the report definition.
To add a destination to the the report definition, bring up the property palette against the report object and then select the "Distribution" property under the "Report" node. This will bring up a dialog that allows you to create a distribution list. You can then test this list by selecting "file->distribute" from the menu.
To run a report that is to be distributed through rwrun60, you need to add "distribute=yes" to the command line. It will pick up the destinations from the report definition. If you add "destination=<filename>" then it will pick up the destinations from the specified "<filename>" and ignore the destinations in the report definition.
Note: if "distribute=yes" is specified on the command line then the destype/desname/desformat parameters will be used to format the report (ie: which printer/display to use during formatting for sizing objects) but will be ignored when the report is sent to the destinations.

Can I plot 2 locations at the same time for each record in a table

I'm trying to plot 2 Locations (2 points on a Power View Map) at the same time for each record/project in a table
I can plot 1 location for each project of course with no problem
but I'm trying to show the Begin Point and the
End Point for each project at the same time
Is this even possible?

First of all THANKS this worked!
But now I stumbled on another issue. So I actually have 3 tables (and I've adopted them to the file you sent)
Table 1 => TripData
Trip
LongLat
Location
Type
TypeCode
Size
NW Tour
47.568077, -122.320800
Seattle, WA
Begin
0
1
NW Tour
47.035608, -122.884812
Olympia, WA
End
1
1
Cali Trip
37.808848, -122.412580
San Francisco, CA
Begin
0
1
Cali Trip
32.682611, -117.178348
San Diego, CA
End
1
1
Table 2 =>
TripInfo
Trip
OneLongLat
NTP
NW Tour
47.568077, -122.320800
1/1/2015
Cali Trip
37.808848, -122.412580
1/5/2015
Table 3 =>
ALLTrips
Trip
Stop
Owner
NW Tour
1
Owner1
NW Tour
2
Owner2
NW Tour
3
Owner3
NW Tour
4
Owner4
NW Tour
5
Owner5
Cali Trip
1
Owner6
Cali Trip
2
Owner7
Cali Trip
3
Owner8
Cali Trip
4
Owner9
Cali Trip
5
Owner10
Cali Trip
6
Owner11
This is how the Diagram View looks like in PowerPivot
Trip Data => Trip Info <= ALLTrips
Since I don't know how to post pictures
The MAP FIELDS are as follows
SIZE - Count of Stop(s)
LOCATIONS - OneLongLat followed by
LongLat (drill down feature)
COLOR - Trip
The problem now happens with the drill down feature
You can either plot OneLongLat which is the general location for each trip
Or LongLat of each trip which shows the begin and end points
But you can't use the drill down feature???
If instead of OneLongLat you use a
State Column it actually works!!!
I wonder if it has to do with the fact that both locations used for the drill down are Long/Lat numbers???
Any suggestions???
And again Thanks for the response!

Get Start and End times for each step in a job

Can someone tell me how to get the start and end times for each step in a background job? Table TBTCP only stores the time that the step was saved in a background job. Table TBTCO stores the times for the entire job and not each individual step.
Thanks.
Ryan

Hi,
Please check this tables and FM perhaps they may help
TBTCJSTEP - Background Job Step Overview
TBTCR - Batch scheduler execution time
TBTCS - Background Processing: Time Schedule Table
GET_JOB_RUNTIME_INFO
Regards,
Ferry Lianto

How to Get Missing Dates for Each Support Ticket In My Query?

Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!

CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

How to view response time for each execution in OEM 12c Cloud Control

Similar Messages

Maybe you are looking for