How to reduce the time for each clips up to 0,04 seconds?

Hi, I'm trying to realize my first time laps. I've need to reduce the time for each clips up to 0,04 seconds, but it seems that the minimum time is 0,1 second. There's a solution?

And use a zip file. Many people can't open RARs.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

Web report for opening it takes long time how to reduce the time?

HI Experts,
I created report using webi. For next time while opening it takes more time. How to reduce the time.

Hi Manikandan,
There could be multiple reason behind the bad performance.
1. Are you using supported JVM version to run Webi reports?
2. Do the reports contain prompts? Are the LOVs set to "Automatic refresh before use"? If yes, uncheck it.
3. How many queries do the report has? Can you run the queries one by one and check which query is taking much time?
4. If it based on relational database, copy and run it against the database directly and check how much time it takes. If more, you may have to fix the issue at database level like using temporary tables, indices, etc.
5. Also check if there are firewalls or proxy server between client and server communication. if yes, try to refresh the report directly on BO server and check.
6. Check if there is any hinderance between BO server and Database server communcation.
Hope it will help.
Regards,
Yuvraj

How to reduce the time..?

Hi All,
this statement below is taking lot of time how can i reduce the time ....?
cheers
sundeep
select * from zausfu where vbeln in so_vbeln
                    AND wadat_ist IN so_wadat
                    AND aland IN so_eland
                    AND vsbed IN so_vsbed
                    AND vsart IN so_vsart
                    AND sdabw = sdabw_wert.
tab-aland = zausfu-aland.
tab-vbeln = zausfu-vbeln.
tab-wadat = zausfu-wadat_ist.
tab-vsart = zausfu-vsart.
tab-sdabw = zausfu-sdabw.
IF sdabw_wert = 'A'.
    tab-flag = 'X'.
ENDIF.
   anz_datensaetze = anz_datensaetze + 1.
append tab.
endselect.

Hi Sundeep,
Please use the below code, might be it will reduce the time for u r program.
Types Declaration
types: begin of ty_zausfu,
       aland type zausfu-aland,
       vbeln type zausfu-vbeln,
       wadat type zausfu-wadat_ist,
       vsart type zausfu-vsart,
       sdabw type zausfu-sdabw,
       end of ty_zausfu.
types: begin of ty_tab,
       aland type zausfu-aland,
       vbeln type zausfu-vbeln,
       wadat type zausfu-wadat_ist,
       vsart type zausfu-vsart,
       sdabw type zausfu-sdabw,
       flag(1)
       end of ty_tab.
Internal Table Declaration
data: it_zausfu type standard table of ty_zausfu initial size 0,
        it_tab type standard table of ty_tab initial size 0.
Workarea Declaration
data: is_zausfu type ty_zausfu,
        is_tab type ty_tab.
Data Declaration
      anz_datensaetze type i.
Data Read from Tables
select aland vbeln wadat_ist vsart sdabw from zausfu
into table it_zausfu
where vbeln in so_vbeln
AND wadat_ist IN so_wadat
AND aland IN so_eland
AND vsbed IN so_vsbed
AND vsart IN so_vsart
AND sdabw = sdabw_wert.
describe table it_zausfu lines anz_datensaetze.
      loop at it_zausfu into is_zausfu.
      move-corresponding is_zausfu to is_tab.
      if sdabw_wert = 'A'.
        is_tab-flag = 'X'.
      endif.
      append is_tab to it_tab.
      clear: is_zausfu, is_tab.
      endloop.
Please reward points, if it is ok.
Regards,
Subbarao

How to reduce download time for intial swf?

How to reduce download time for intial swf?
There are a number of RPC calls but most of the data is cached at server end but still swf takes a lot of time to download completely.
What all are the ways by which i can reuce the inital load time of my application?

Reduce the size of the SWF by moving code and assets not needed for the
first screen out into modules.

How to name the data for each column I am acquiring in lvm file

does anybody hint How to name the data for each cloumn I am acquiring in lvm file.
I want to tag or name ,eg temperature at top of a column which shows the temperature readings .I am writing into a labview measurement file.
Thanks

Use Set Waveform Attribute on each channel of your data. Set an attribute with name "NI_ChannelName". The value is a string containing the name you wish to call the channel.
This account is no longer active. Contact ShadesOfGray for current posts and information.

How to increase the time for detect a device down on Prime 2.0

Hi,
I would like to know how to increase the time for detect when a device has lost connection, currently I monitor several stand alone Access Points that are paleced on differents locations connected to prime through 256 Mbps Links, so when the location has very high bandwith utilization, an e-mail notification about the unreachable Access Point is sent, but if we check te reachability, the Access Point is reachable, and we don´t want to receive to many of this notificatios,
thanks for your help

Go to the Console, Select the server --> configuration --> tuning tab,
Stuck Thread Max Time and Stuck Thread Timer Interval (give your required time)
This will definitely increase the Stuck Thread time interval.
or
by using work manager also you can define Stuck Thread Max Time interval by editing deployment descriptor file
<work-manager>
<name>wm_name</name>
<max-stuck-thread-time>30</max-stuck-thread-time>
<stuck-thread-count>5</stuck-thread-count>
</work-manager>

I am having a difficult time getting the duration of multiple selected clips. The duration display only will display the time for one clip. Yes, I know I can add them up myself, but why? :-)

I am having a difficult time getting the duration of multiple selected clips. The duration display will only display the time for one clip not multiple clips. Yes, I know I can add them up myself, but why? :-)
I am using imovie 10.0.6

For reasons that you would have to ask Apple for they decided not to allow the precise position of the playhead to be shown in iMovie 10 (unlike in FCP 10.1.x).
Geoff

How can I reset the CTI for each clip to 00:00?

I'm brand new to this - got Premier Elements 12 yesterday, so please bear with me.
I have clips from a soccer game, each of which starts with 00:00. I have written notes about key scenes in each clip using the time that scene occurs in each clip. But when I add clips to the timeline, each clip's CTI begins at the point where the last clip's left off. So, say I wanted to get to a scene in clip 2 at 0:44. But clip 1, with a duration of 4:30, precedes clip 2 in the timeline . To get to the scene I was looking for in clip 2, I'd have to add the 4:30 from clip 1 to the 0:44 in clip 2 to find my scene in the timeline at 5:14 . Obviously, the problem only gets worse with each additional clip. And near impossible when I trim clips.
One "workaround" I can use is to make a copy of the original clip in project assets, adjust the in and out points in the copy to get the scene I want, save/rename that scene and add it to the timeline instead of the original clip. Each scene would then be renamed and would show it's specific duration in the timeline. But that seems like a lot of work, to have to make copies of original clips in assets, trim them there and take them to the timeline. Back and forth, back and forth.
Is there a way to keep the start and end times of each original clip when I add it to the timeline, so I can isolate each scene in that clip and trim out the unwanted portions without having to do math or spend time making and trimming copies? To be more succinct, Can I reset the CTI at the start of each clip to 00:00 within the timeline?
I hope I've described my issue in a clear way that doesn't cause confusion. If not, please let me know what other questions you have or additional info you need to understand the issue I'm describing. Thanks, and sorry for the long post.

mascott2300
Please take a look at the blog post that I wrote about the gathering, assembling, organizing, and management of clips in a large project.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
See if any of the details work for you in your planned Premiere Elements projects.
Also, from the point of view of leaving informational notes in the program, consider the "Comments" opportunities of the unnumbered markers when you place unnumbered markers in the Timeline.
ATR Premiere Elements Troubleshooting: PE11: Forget Me Not Clip Details and Timeline Unnumbered Markers
Please do not hesitate to ask questions or to ask for clarification on anything written.
Thank you.
ATR

Reducing the time for a call to go to voicemail

I want to reduce the time time it takes for a call to go to voicemail. Currently the setting in Tools-Options-Calls-Voice Messages is 15 seconds. How can I reduce the time.

Yes there is a way to set up the default number of "time" not rings. Default is 20sec I have mine at 30sec (max)
Voicemail No-Answer Length
check to see vm number *#61#
Cing 61*1areacodevmnumber*1130#
First Dial *#61# to see your voice mail number (this is the number that the phone fowards the call to when there is no answer) write it down including area code
Then dial 611(VOICEMAIL NUMBER)1130# then dial or send
There should be no spaces and make sure you enter the number correctly (ie) 61*13235552323*1130# then you should see a comfirmation.

Can I adjust the time for each slide?

I'm making videos out my own photos.
I've figured out how to upload the photos, record a commentary, etc. but I need to adjust the time that each slide is shown. This is because the videos are how-to's, and some explanations are longer than others, and in that case the slide needs to stay on longer.
I'm using iMovie 08 and can't upgrade because I'm still on OSX 10.5.8.
Thanks!
Gina

There should be a Duration button at the bottom left of the photo thumbnail in your project. Click this button and you will see a dialog box where you can adjust the duration. Be sure not to check the box that say "apply to all photos".

How to increase the time for threadstuck jdeveloper weblogic server

Hi,
This is a requirement for increasing the time for threastuck detection in jdeveloper weblogic server.
Few of my threads take a longer time than the default value for threastuck detection.
Could you please share the suggestions on how to do it?
i have tried by creating workmanager from the administration console but not aware of how to apply it to application(in web.xml).
Share inputs on this.
Thanks,
Devender

You are posting this on the wrong forum. All this in one of the server forums.
Timo

Slideshow settings - seeting the time for each slide to play

I have been trying to adjust the slideshow setting in iPhoto for "Play each slide for a minimum of X seconds". When I change this, the amount of time a slide plays changes in iPhoto, but not when I play the slideshow through Front Row. The time in Front Row is always 5 seconds and does not change. I am able to alter the music and transition effects, but not the slide play time.
So, the basic question is, how do you change the maount of time a slide plays in a slideshow in Front Row?

Hi, I've got the same problem. I'd like to play either an album or a slideshow in Front Row and advance each slide myself with the remote. Like you, I adjust all the settings in iPhoto (even changing the transition to 60 seconds) but it insists on advancing each slide for me every 5 seconds!
Also, curiously I turn the music off in slideshow and even when playing slideshow it insists on playing music!

How to view response time for each execution in OEM 12c Cloud Control

Hi All,
I want to view response time of each execution for my SOA composite in OEM 12c Cloud Control. Can anyone tell me how can I achieve that?
Thanks in Advance!!

You should open an SR and support can assist you with it. The only current case where that feature is known to not work is in the case where the Dehydration Store is running on RAC. Otherwise, it should be possible to get it to work. The main thing is that you need to have DB configuration properties (host, port, sid) that have a 3-way string match between the JDBC data source configuration in the WLS server, the JDBC properties you add to the Monitoring Properties of the SOA Infrastructure target, and the connect settings of the Database target in EM that matches to the dehydration DB.
If there isn't a match in all 3, the Dehydration Diagnostics page will not work. But again, to look into your specific setup, you should file an SR and work with support.

How to get the texts for each line item for Sales order in a smartform

I'm createing a smart form in which i need to display certain texts for each line item of a sales order. How can i get those??
I'm trying with the table STXH and FM read_text... but i'm not clear how and what i'm getting... can anybody pls help me.....

Hi There,
But then i will be getting only the value. i want to link that against the particular material of the Purchase Order.
Like for ex:
PO No. Material Code        Line Item        Basic        Excise       Tax       Inv Value
0000001 5000251                010               100           16         4.64      120.64
0000001 5000252                020               200           32         9.28      241.28
Can u help me on this?
Regards,
Jitesh

How to reduce the time of a loop

Hello,
I have a VI how generate and acquire signals via a NI-USB device.
I have lighted a bit my VI because the rest of the calculation doesn't increase the time spend in the loop. (I acquire 8 signals and i do 2 PID in the real VI)
So, the VI is made for read two hall sensor of a motor and tell me in wich position is the motor (Motor is a stepper with 20step per 360°). But I think that my VI only count from 0 to 19 ..
I have tried to decrease the values of both DAQ but then the sine wave doesn't look like sine.. The loop run at 200ms/iteration
If anyone know how to run it faster it would be great
thanks
Max
Attachments:
Loop_time.vi ‏181 KB

And use a zip file. Many people can't open RARs.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to reduce the time for each clips up to 0,04 seconds?

Similar Messages

Maybe you are looking for