How to view temporary storage areas while loading from DTP?
I am loading loading to Infocube using DTP.The following error occurs
"Error while updating to target C_0APO_C (type INFOCUBE)" .
I want to view temporary storage area to see data after transformation.How to do that and why this error is occuring.
Hi..
Option 1:
To view the Temporary Storage after the data load:
You have to enable the Temporary storage in the DTP Definition for various steps that you want to analyze.
This is available in the Settings of DTP (see Menu options)
Option 2:
Whenever your data load generates any errors, in the DTP Monitor you can see the Error Stack to analyze the errors.
Cheers.
Similar Messages
-
Hi,
We are facing some issue while loading the data from R/3 to BW using DTP.
We are getting the error (both for full and delta)as follows:
Data package 1:Errors during Processing
* Extraction datasource*
* Filter out new records with same key.*
* RSDS material*
* Update to datastore object*
* Unpack data package*
* Exception in substep:write data package*
* Processing terminated.*
* Set technical status to red*
* Set overall status to red*
* Set overall status to green*
* Further processing started*
* Set status to u2018Processed furtheru2019*
The expansion of the error Exception in substep: write data package:
Record 0, segment 0001 is not in teh cross-record table
Error while writing error stack
Record 0, segment 0001 is not in the cross-record table
Error in substep update to DataStore Object
We are using both start routine and end routine in the transformation.
Any help on this is highly appreciable.
End routine:
IF NOT RESULT_PACKAGE IS INITIAL.
SELECT salesorg comp_code FROM /bi0/psalesorg
INTO TABLE it_salesorg
FOR ALL ENTRIES IN RESULT_PACKAGE
WHERE salesorg = RESULT_PACKAGE-SALESORG
AND objvers = 'A'.
SELECT /bic/ZMATRTUGP FROM /bic/pZMATRTUGP
INTO TABLE it_mat
FOR ALL ENTRIES IN RESULT_PACKAGE
WHERE /bic/ZMATRTUGP = RESULT_PACKAGE-/bic/ZMATRTUGP.
it_data[] = RESULT_PACKAGE[].
ENDIF.
get company code from salesorg for all material
LOOP AT it_data INTO st_data.
w_tabix = sy-tabix.
READ TABLE it_salesorg INTO st_salesorg
WITH TABLE KEY salesorg = st_data-salesorg.
IF sy-subrc = 0.
st_data-comp_code = st_salesorg-compcode.
MODIFY it_data FROM st_data INDEX w_tabix.
ENDIF.
ENDLOOP.
REFRESH RESULT_PACKAGE.
RESULT_PACKAGE[] = it_data[].
*Finally check for each material if something has changed since the last
*loading : if yes compare and update, otherwise no upload
IF NOT it_mat[] IS INITIAL.
SELECT * FROM /bic/azalomrtu00
INTO TABLE it_check
FOR ALL ENTRIES IN it_mat
WHERE /bic/ZMATRTUGP = it_mat-zmaterial.
ENDIF.
DELETE it_check WHERE salesorg IS INITIAL.
CLEAR st_result_package.
LOOP AT RESULT_PACKAGE INTO st_RESULT_PACKAGE.
READ TABLE it_check INTO st_check
WITH TABLE KEY
/bic/ZMATRTUGP = st_result_package-/bic/ZMATRTUGP
CUST_GRP4 = st_result_package-CUST_GRP4
SALESORG = st_result_package-SALESORG
VALIDTO = st_result_package-VALIDTO.
IF sy-subrc = 0.
*If one of the characteristic is different, let that entry in the
*result_package otherwise no use updating it
IF st_check-/BIC/ZCSBRTUGP = st_result_package-/BIC/ZCSBRTUGP
AND st_check-/BIC/ZCONDTYPE = st_result_package-/BIC/ZCONDTYPE
AND st_check-comp_code = st_result_package-comp_code
AND st_check-/BIC/ZCNT_RTU = st_result_package-/bic/ZCNT_RTU
AND st_check-VALIDFROM = st_result_package-VALIDFROM.
DELETE RESULT_PACKAGE.
ELSE.
*entry is new : let it updated.
ENDIF.
DELETE it_check WHERE
/bic/ZMATRTUGP = st_result_package-/bic/ZMATRTUGP
AND CUST_GRP4 = st_result_package-CUST_GRP4
AND SALESORG = st_result_package-SALESORG
AND VALIDTO = st_result_package-VALIDTO.
ENDIF.
ENDLOOP.
*if some entries are in the ODS but not in the datapackage, they have to
*be deleted in the ODS since they don't exist anymore
LOOP AT it_check INTO st_check.
CLEAR st_result_package.
st_result_package-/bic/ZMATRTUGP = st_check-/bic/ZMATRTUGP.
st_result_package-CUST_GRP4 = st_check-CUST_GRP4.
st_result_package-SALESORG = st_check-SALESORG.
st_result_package-VALIDTO = st_check-VALIDTO.
st_result_package-recordmode = 'D'.
APPEND st_result_package TO RESULT_PACKAGE.
ENDLOOP.
Thanks in advance.
Thanks,
MeghanaHi Meghana
HAve you got an short dump in ST22 transaction ?
If yes, what is it ?
In your routine, maybe you should as well add a counter for index in your loop :
DATA : w_idx like sy-tabix.
When you loop at result_package, do : w_idx = sy-tabix.
And make : DELETE result_package INDEX w_idex.
Hope it helps you
Mickael -
Duplicate Records in DTP's Temporary Storage Area
I am getting duplicate records (36Records) in DTP's Temporary storage, while loading data to 0MAT_SALES (Text). In Error DTP also I am not getting the Error stack. What will be the reason?
Ram MohanAs I informed in the Previous thread, I have Duplicate record.
in PSA there is no any duplicate, while execute the DTP i am getting duplicate records in DTP's temporary storage area...
Ram -
Can someone please give me step by step directions on how to view temporary files on an iPad 2.. Thank you
What temporary files are you talking about?
-
Data Records are missing in between while loading from R/3 (ECC) to BI.
Dear Experts,
I have created a custom DataSource on Custom Function Module. This datasource contains 600 fields. (I know its a monster and splitting options are thinner).
1) Validate the data using RSA3 in R/3 and showed the correct record count.
2) Validate the data by debugging the FM, still showed the correct record count.
But while loading from R/3 to BI, records are missing.
Various Scenarios load from R/3 to BI:
1a) Loaded full load (78000 records) with all default data transfer settings. PSA showed up with 72000 records (missing 6000) only. Compared the Idocs vs data packets, both reconciled.
1b) Loaded full load (78000) with modified settings (15000 KB / data packet). PSA showed up with 74000 records (missing 4000) only.
2a) Loaded with selection parameters (took a small chunk) (7000 records) with default data transfer settings. PSA showed up only 5000 records (missing 2000).
2b) Loaded with selection parameters (7000 records) with modified settings (15000 KB / data packet). PSA showed up all 7000 records.
3a) Loaded with selection parameters (took further small chunk) (4000 records). PSA showed up all records regardless data transfer settings.
Also please look at this piece of code from the function module,
IF l_wa_interface-isource = 'ZBI_ARD_TRANS'.
l_package_size = l_wa_interface-maxsize DIV 60.
ENDIF.
I really appreciate your advise or help in this regard.
Thanks much,
AnilHi,
Which module u want?
if its SD(for example)
steps>>
1>In AWB goto "business content"
2> goto "Info provider"
3>Under infoarea select SD cubes
4> Drag related cubes and ODS to right panel
5> Set the grouping option "In Data flow before&afterwards"
6>Install the collected objects
Go to R/3
7> Use Tcode RSA5 Transfer all regarding SD module datasources
Goto BW
8> Right click on the source system "Replicate datasources"
[DataSources|http://help.sap.com/saphelp_nw70/helpdata/en/3c/7b88408bc0bb4de10000000a1550b0/frameset.htm]
Edited by: Obily on Jul 10, 2008 8:36 AM -
Error while loading from PSA to Cube. RSM2-704 & RSAR -119
Dear Gurus,
I have to extract about 1.13 million records from set up tables to the MM cube 0IC_C03. While doing, the following two errors occured while loading from the psa to the cube:
Error ID - RSM2 & error no. 704: Data records in the PSA were marked for data package 39 . Here there were 2 errors. The system wrote information or warnings for the remaining data records.
Error ID- RSAR & No. 119: The update delivered the error code 4 .
(Data records for package 39 selected in PSA - 2 error(s). Record 5129 :No SID found for value 'EMN ' of characteristic 0BASE_UOM . Record 5132 :No SID found for value 'EMN ' of characteristic 0BASE_UOM )
I tried to change the defective records in psa by deleting the erraneous field value EMN and tried to load but failed.
Now, my questions are:
How can I resolve the issue ?
(ii) How to rectify the erraneous record ? should we only delete the erraneous field value or delete the entire record from the psa.
(iii) How to delete a record from psa.
Thanks & regards,
Sheeja.Hi,
Data records for package 39 selected in PSA - 2 error(s). Record 5129 :No SID found for value 'EMN ' of characteristic 0BASE_UOM . Record 5132 :No SID found for value 'EMN ' of characteristic 0BASE_UOM
The issue with record no. 5129 and 5132.
In PSA check errorneous records and it will display only the error records, you just edit as per the require and try reloading into cube.
Deleting single record is not possible.
Let us know if you still have any issues.
Reg
Pra -
How to view pictures on epub book purchased from iBooks
How to view pictures on epub book purchased from iBooks?
products7074740
The important thing to remember abuout iPhoto is that it's a database. And like any db, the data must be imported into it. By default, when you import the pics to iPhoto they are copied into the iPhoto Package File in your Pictures Folder. If you have NOT changed the default, then yes, you can trash the pics outside of the iPhoto Package File.
Most people do this.
Regards
TD -
Data flow tasks faills while loading from database to excel
Hello,
I am getting error while loading from oledb source to excel and the error as shown below.
Error: 0xC0202009 at DFT - Company EX, OLE DB Destination [198]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
Error: 0xC0209029 at DFT - Company EX, OLE DB Destination [198]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (211)" failed because error code 0xC020907B occurred, and the error row
disposition on "input "OLE DB Destination Input" (211)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the
failure.
Error: 0xC0047022 at DFT - Company EX: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Destination" (198) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput
method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC02020C4 at DFT - Company EX, OLE DB Source 1 [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
Error: 0xC0047021 at DFT - Company EX: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047038 at DFT - Company EX: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source 1" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine
called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at DFT - Company EX: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Any help would be appreciated ASAP.
Thanks,
Vinay sYou can use this code to import from SQL Server to Excel . . .
Sub ADOExcelSQLServer()
' Carl SQL Server Connection
' FOR THIS CODE TO WORK
' In VBE you need to go Tools References and check Microsoft Active X Data Objects 2.x library
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "EXCEL-PC\EXCELDEVELOPER" ' Enter your server name here
Database_Name = "AdventureWorksLT2012" ' Enter your database name here
User_ID = "" ' enter your user ID here
Password = "" ' Enter your password here
SQLStr = "SELECT * FROM [SalesLT].[Customer]" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & _
";Uid=" & User_ID & ";Pwd=" & Password & ";"
rs.Open SQLStr, Cn, adOpenStatic
' Dump to spreadsheet
With Worksheets("sheet1").Range("a1:z500") ' Enter your sheet name and range here
.ClearContents
.CopyFromRecordset rs
End With
' Tidy up
rs.Close
Set rs = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Also, check this out . . .
Sub ADOExcelSQLServer()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "LAPTOP\SQL_EXPRESS" ' Enter your server name here
Database_Name = "Northwind" ' Enter your database name here
User_ID = "" ' enter your user ID here
Password = "" ' Enter your password here
SQLStr = "SELECT * FROM Orders" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & _
";Uid=" & User_ID & ";Pwd=" & Password & ";"
rs.Open SQLStr, Cn, adOpenStatic
With Worksheets("Sheet1").Range("A2:Z500")
.ClearContents
.CopyFromRecordset rs
End With
rs.Close
Set rs = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Finally, if you want to incorporate a Where clause . . .
Sub ImportFromSQLServer()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim RS As ADODB.Recordset
Set RS = New ADODB.Recordset
Server_Name = "Excel-PC\SQLEXPRESS"
Database_Name = "Northwind"
'User_ID = "******"
'Password = "****"
SQLStr = "select * from dbo.TBL where EMPID = '2'" 'and PostingDate = '2006-06-08'"
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & ";"
'& ";Uid=" & User_ID & ";Pwd=" & Password & ";"
RS.Open SQLStr, Cn, adOpenStatic
With Worksheets("Sheet1").Range("A1")
.ClearContents
.CopyFromRecordset RS
End With
RS.Close
Set RS = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it. -
Delta records are not loading from DSO to info cube
My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
ShammaData is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue. -
How to view list of all system exceptions from standard package?
Hello,
How to view list of all system exceptions from standard package?
Regards
KrishnaJust for fun:
SQL> conn sys/****** as sysdba
Verbonden.
SQL> select cast(trim(substr(text,instr(text,'(')+1,instr(text,',')-instr(text,'(')-1)) as varchar2(30)) exception_name
2 , to_number(replace(substr(text,instr(text,',')+1,instr(text,')')-instr(text,',')-1),'''')) error_number
3 from user_source
4 where text like '%pragma EXCEPTION_INIT%'
5 and type = 'PACKAGE'
6 and name = 'STANDARD'
7 order by exception_name
8 /
EXCEPTION_NAME ERROR_NUMBER
ACCESS_INTO_NULL -6530
CASE_NOT_FOUND -6592
COLLECTION_IS_NULL -6531
CURSOR_ALREADY_OPEN -6511
DUP_VAL_ON_INDEX -1
INVALID_CURSOR -1001
INVALID_NUMBER -1722
INVALID_OBJECT_NAME -44002
INVALID_QUALIFIED_SQL_NAME -44004
INVALID_SCHEMA_NAME -44001
INVALID_SQL_NAME -44003
LOGIN_DENIED -1017
NO_DATA_FOUND 100
NO_DATA_NEEDED -6548
NOT_LOGGED_ON -1012
PROGRAM_ERROR -6501
ROWTYPE_MISMATCH -6504
SELF_IS_NULL -30625
STORAGE_ERROR -6500
SUBSCRIPT_BEYOND_COUNT -6533
SUBSCRIPT_OUTSIDE_LIMIT -6532
TIMEOUT_ON_RESOURCE -51
TOO_MANY_ROWS -1422
USERENV_COMMITSCN_ERROR -1725
VALUE_ERROR -6502
ZERO_DIVIDE -1476
26 rijen zijn geselecteerd.Regards,
Rob. -
How to validate data is in specific list while loading from SQL*Loader
I have a sample data file like below
1,name1,05/02/2012 10:00:00,blue
2,name2,06/02/2012 10:00:00,red
3,name3,07/02/2012 10:00:00,yellow
4,name4,08/02/2012 10:00:00,white
I would like to validate 4Th column to be a valid color (ie) All color should be in a specific list, if it is not in the lis then the record should do to bad/discard file
How can do that while loading Data From SQL*Loader?user8860934 wrote:
I have a sample data file like below
1,name1,05/02/2012 10:00:00,blue
2,name2,06/02/2012 10:00:00,red
3,name3,07/02/2012 10:00:00,yellow
4,name4,08/02/2012 10:00:00,white
I would like to validate 4Th column to be a valid color (ie) All color should be in a specific list, if it is not in the lis then the record should do to bad/discard file
How can do that while loading Data From SQL*Loader?Probably a lot easier with an EXTERNAL TABLE (they're much more flexible).
Is SQL Loader a mandatory requirement for some reason? -
Revoke access to Business Areas while loading data
Hi,
What is the best practive to restrict access to business areas (or entire EUL) while data is being loaded?
Currently users could use Discoverer to query the tables being loaded. What would be an efficient way to make sure they are not able to query the database while loading the data? We load using OWB (PL/SQL).
Thanks,Hi
In the first step of your data load revoke select rigths from your eul and in the last step grant it back.
Ott Karesz
http://www.trendo-kft.hu -
DUmp Erro ASSIGN_TYPE_CONFLICT while loading from DSO to INFOCUBE
HI ALL,
Here i had rquirement of modifying the Tranformation rules and i have done some routine coding for a particular infoobject
and deleted the data from DOS & Cube , then i started Loading to DSO, here i got the sucess for DSO, now i have got the modified data of the particular Infoobject in the DSO,
But i am facing a Dump Error while loading data from DSO to Cube thorugh the DTP .
HEre is the Error "ASSIGN_TYPE_CONFLICT" which i see in ST22.
Plz,
Thanks in Advance,
sravanHI,
When i started the load for the first time i got he same error, so i have activated the DTP and laoded it again,
then i faced the same problem,
where the Modified data is already in DSO and i have validated the Data also, that is ok ...
so i need to Delete or to need to create another DTP to load the data from DSA to CUBE.
and even i have cheked all the tansformation rules they are all fine the DSO structure and Infocube Structure is ok,
Please suggest,
Thanks LAX, -
Hi,
I am loading data to a DSO from 0FI_AP_30. PSA I am able to load successfully but while loading this PSA data to DTP i get the following error message:
@5D@ Request REQU_D44GG0YIPPH7NBQ5F1VOCB890 not extracted; request is in obsolete version of DataSource @35@
and in help this is the respose:
Diagnosis
The request REQU_D44GG0YIPPH7NBQ5F1VOCB890 was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
System Response
The request is in PSA /BIC/B0001232, version 001. The current PSA version is 002. An extraction would lead to a short dump because of field incompatibilities.
Procedure
If you no longer require the data, you do not need to take any further action.
If you do still require the data, you can just extract it by creating a generic DataSource in the Myself source system in PSA /BIC/B0001232, version 001. You can find the technical name of the PSA table in the table RSTSODS with the specified PSA name and version. Convert the data using a separate transformation into the new target format.
Please let me know what can be done for this? pl give me the solution.
Thanks & Regards,
VijayaHi Vijaya,
I am also facing the same error for data source 2LIS_03_BF, i am unable to load the same in one DSO, can you elaborate how you solved your issue ASAP?
I can't run IP because this data source requires downtime in ecc. We have already done that.
Thanks & Regards
Manna Das -
Images are not loading from initial domain when using a cdn
Hello, i have a wordpress website on which i set the w3 total cache plugin with a cdn, the cdn is MaxCDN and is configured to not serve images but only css & js & font files. Because i configured the cdn not to serve images, the images in css files have the src as absolute path, path which point to original website domain, something like this: background-image: url("http://www.originaldomain.com/images/back.jpg");, the css file is served from the cdn like this: http://cdn.originaldomain.com/css/style.css . So the problem is that firefox refuse to load the images referred in style.css file, images which probably appear to be in another domain. If i try to load the images directly in browser, using address bar, they are loading ok, but on loading from css file i got a http error 500 (acording to firebug). The same website is loading ok in other browsers: ie7/ie8/ie9, opera, safari and chrome. Can anyone help me to solve the issue?
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.
Maybe you are looking for
-
Smart Album not so smart?
Hi. A few months ago I upgraded from iPhoto to aperture. It's all rather confusing but I've been willing to overlook it because of the usefulness of aperture as an advanced photo editor. Now however all sorts of weird things are showing up. The Smart
-
Hi, I have a scenario where I have applied Css styles to the textflow using the IFormatResolver interface. Now what I need is a way to show which style is applied to the current selection. I am getting all infomation using the following however the
-
Quicktime and new Adobe flash don't work!!
Ever since I have ? downloaded new iTunes/Quicktime updates I cannot get Quicktime to play any movie trailers. Also, when I go to any sites which need a Flash player, I am unable play any flash related videos. To add further frustration, I am unable
-
Hello ABAP Experts. I am trying to learn OO ABAP although have been using procedural ABAP for many years and I am writing an ALV Tree (which is also a first). My problem is: I have written a standard report which has a screen (which contains my ALV T
-
My CS2 templates are printing out in reverse.
My CS2 Templates are printing out in reverse. All other programs are printing normally. Can anyone advise to clear this problem. Many thanks