HOW TO VIEW THE ENABLED AUTO EXTENDS FOR THE DBF

HI,
CAN YOU TELLME WHICH VIEW HELPS TO VIEW THE ENABLED AUTOEXTENDS FOR DBF.
Thanks in advance
cgprasad

Hi,
PROD.SQL>DESC DBA_DATA_FILES
Name                                                  Null?    Type
FILE_NAME                                                      VARCHAR2(513)
FILE_ID                                                        NUMBER
TABLESPACE_NAME                                                VARCHAR2(30)
BYTES                                                          NUMBER
BLOCKS                                                         NUMBER
STATUS                                                         VARCHAR2(9)
RELATIVE_FNO                                                   NUMBER
AUTOEXTENSIBLE VARCHAR2(3)
MAXBYTES                                                       NUMBER
MAXBLOCKS                                                      NUMBER
INCREMENT_BY                                                   NUMBER
USER_BYTES                                                     NUMBER
USER_BLOCKS                                                    NUMBER                  Regards,
Yoann.

Similar Messages

How to view the source code for Native Method

hi
i am using some native methods in to my code ;
can anybody tell me how to view the source code for the same ;
nik

Buy/acquire a C/C++/assembly code disassembler and run the shared library through it.

How can I turn off auto-renewal for subscriptions? I have been in the manage my account but I can't see any other option than to auto-renew?

how can I turn off auto-renewal for subscriptions? I have been in the manage my account but I can't see any other option than to auto-renew?

Follow the instructions in this article. You can turn off the auto-renewal on either your i-device or via iTunes on your computer:
Manage your auto-renewing subscriptions - Apple Support
Cheers,
GB

How to Enable Auto-Complete for All users on Terminal Server

Hello,
I have 4 Microsoft 2003 Terminal Servers, and I want to enable Auto-Complete for all users, and I am unable to find a way to do this. I have tried creating a custom install of Adobe Reader, and installing that, but it isn't working. Ideas anyone?
Thanks in advanced
Doug

Acrobat is not permitted to run as a server process.
Licenses are assigned to individual users, each of whom must have their own serialized copy.

How to view the Users in the Portal Activity Report

Hello,
Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
Please explain me in detail how to view the Report.
Thnx in Advance
cheers,
Murali

hi,
You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
Do see the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
Weblog :Portal SP9: Portal Activity Report
Regards,
Ganesh N

How to view the payload of a Message if it processed through AAE

Hi All,
Can anybody please tell me how to view the payload if the message processed through Advance Adapter Engine.
I have developed a SOAP to SOAP interface by using Advance Adapter Engine and it is working fine I can see the messages in Runtime Work Bench(RWB) but when I clicked on the Sender and Receiver Adapter I can't see the payload so I am wondering if anyone knows how to view the payload or it is possible to view the payload if the message was processed through Advance Adapter Engine (AAE).
Is there any setting or properties available in NWA to enable or disable the payload of AAE?
Thanks,
Iqbal

Hi All,
Unfortunately I can only see the SOAP Document but no Payload.
here is what I can see
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
- <SOAP:Header xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
- <sap:Main xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3" versionMinor="0" soap:mustUnderstand="1">
<sap:MessageClass>ApplicationResponse</sap:MessageClass>
<sap:ProcessingMode>synchronous</sap:ProcessingMode>
<sap:MessageId>75e50f37-9bef-11e0-af98-000027d151a6</sap:MessageId>
<sap:RefToMessageId>7597008d-9bef-11e0-a027-000027d151a6</sap:RefToMessageId>
<sap:TimeSent>2011-06-21T10:15:59Z</sap:TimeSent>
- <sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
<sap:Service>Srv_xxxxx__Sender_SOAP_AAE_BS</sap:Service>
</sap:Sender>
- <sap:Receiver>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
<sap:Service>Srv_xxxxx_Sender_SOAP_AAE_BS</sap:Service>
</sap:Receiver>
<sap:Interface namespace="urn:xxxxxxxx.com:pi:A_TEST:HTTP_TO_SOAP_AAE">SI_OS_xxxx_Request_AAE</sap:Interface>
</sap:Main>
- <sap:ReliableMessaging xmlns:sap="http://sap.com/xi/XI/Message/30" soap:mustUnderstand="1">
<sap:QualityOfService>BestEffort</sap:QualityOfService>
</sap:ReliableMessaging>
<sap:System xmlns:sap="http://sap.com/xi/XI/Message/30" soap:mustUnderstand="1" />
- <sap:HopList xmlns:sap="http://sap.com/xi/XI/Message/30" soap:mustUnderstand="1">
- <sap:Hop timeStamp="2011-06-21T10:15:59Z" wasRead="false">
<sap:Engine type="AE">af.dgx.dbdgx66</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
<sap:MessageId>75e50f37-9bef-11e0-af98-000027d151a6</sap:MessageId>
</sap:Hop>
</sap:HopList>
</SOAP:Header>
- <SOAP:Body xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
- <sap:Manifest xmlns:sap="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink">
- <sap:Payload xlink:type="simple" xlink:href="cid:payload-75e51c499bef11e0a13a000027d151a6atsap.com">
<sap:Name>maindocument</sap:Name>
<sap:Description>main document</sap:Description>
<sap:Type>Application</sap:Type>
</sap:Payload>
</sap:Manifest>
</SOAP:Body>
</SOAP:Envelope>
Do I need to do anything in NWA to enable the payload for Sender and Receiver?
Thanks,
Iqbal

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

How to View the Scheduler in ODI Console

Hi
In ODI Studio, we may Schedule a Scenario and also, we may view all Schedules process from the Agents (View Schedule option).
My colleagues are going to use ODI Console, but we cannot find out HOW to View the Schedule in ODI Console.
In Oracle documentation about FDMEE, we can read the following: If you want to cancel a specific instance of a schedule, use the ODI Studio or ODI Console... see the PDF document in attachment.
Regards
Claude

To display the schedule for one agent:
In Topology Navigator expand the Agents node in the Physical Architecture accordion.
Select the Physical Agent you want to update the schedule.
Right-click and select View Schedule.
The Schedule Editor appears, displaying the schedule for this agent.
Check: http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/running_executions.htm#ODIDG634
HTH -
Jasmine

HOw to view the records in a structure qaqee ?

hi every one ,
we can view the tble through SE16
HOw to view the records in a structure qaqee ?
Thanks in advance

Hello,
Please check the link
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/90/8d7301b1af11d194f600a0c929b3c3/content.htm
You can view the struture in SE11 t-code for its components.
Regards,
Shailesh

How to view all attachemt in outlook for user in my network

Hello,
how to view all attachment in outlook for users in my network
i am used below path:
"C:\Users\ username \AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.Outlook"
All attachments
I can not find some attachments exist on the
email did not find her on the track
above.
thanks

Hello,
You may also try this VBA solution:
https://gallery.technet.microsoft.com/office/Save-attachments-from-5b6bf54b
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to view the table at the application level

Dear All,
How to view the table in the Data Dictionary at the application level, If a table is created at the database level by using CREATE statement.
code/
create table zmard as select * from sapone.mard where 1 = 2
/code
I would like to view the table above, which is created at the Oracle database level in the Data Dictionary.
can anyone guess the solution.
Best wishes
Mahesh

Hi
U should create a program using SQL native in order to select and show the data.
By SE11 or directly in the program u can define a structure like your table:
DATA: BEGIN OF W_ZMARD,
              FIELD,
          END     OF W_ZMARD.
EXEC.
   OPEN CURSO FOR SELECT * FROM ZMARD
ENDEXEC.
DO.
EXEC.
     FETCH NEXT CURSOR INTO :W_ZMARD
ENDEXEC.
IF SY-SUBRC <> 0.
     EXIT.
ENDIF.
WRITE: / W_ZMARD-FIELD,
ENDDO.
EXEC.
CLOSE CURSOR
ENDEXEC.
I don't know if it's possible to create a view in SE11, because it's needs a table just defined in SE11, u can create a new view ZMARD based on MARD but I don't believe it'll use your table.
Max

How to view the Invoice

Hi
Can anyone explain me like how to view the Customer and vendor invoices through T.Code or through path.
Thanks & Regards

hi,
you can view the customer & vendor invoice by giving the FI document number in FB03. Then you can Go for Environment - Document Environment - Original Document. This will take you to the Customer invoice which was raised in the SD module. or vendor invoice which was raised in the MM module.
you can follow the same process from the FI report : FK10N for vendors & FD10N for Customers.
hope its useful.
regards,
R.Ramakrishnaraj

How to view the physical size of objects

Hi
Please advise how to view the physical size of objects like tables, indexes, materialize views etc.
Wishes
Jawad

To see the physical size of objects like tables, indexes, use
USER_SEGMENTS where SEGMENT_TYPE=table/index/partition etc.
But for views/packages/java/trigger, you can only see rough estimate in USER_OBJECT_SIZE

How can I set up auto respond for email

How can I set up auto respond for email?

Hey there jimmac169,
It sounds like you want to have the Mail app automatically reply to emails that come in. You can do this in the app itself, but in order for the function to work, Mail needs to be open. Take a look at this info from the following article:
Mail (Yosemite): Reply to, forward, or redirect messages
Automatically reply to or forward messages
Mail must be open before it can automatically forward or reply to messages. If you want to send automatic replies when Mail isn’t open—like when you’re on vacation—check with the provider of your email account.
Choose Mail > Preferences, then click Rules.
Click Add Rule, then type a name for the rule.
Indicate whether any or all of the conditions must be true for the rule to be applied.
Set the conditions that determine which messages to automatically reply to or forward.
Choose options from the “Perform the following actions” pop-up menu.
Forward messages: Choose Forward Message from the first pop-up menu, then enter the email addresses where you want to receive the forwarded messages. Click Message, then enter any text you want to include with the forwarded message. For example, you could explain that you’re automatically forwarding messages.
Reply to messages: Choose “Reply to Message” from the first pop-up menu, click “Reply message text,” then enter your reply. Mail includes the full text of the original message in your reply.
Click OK.
Carefully consider the rules you create. If they’re too broad, messages can be sent inadvertently or create loops (replies to replies you sent). If possible, test the rules.
Thank you for using Apple Support Communities.
All the very best,
Sterling

How to view the tables/views available in Oracle

HI,
I am creating DB connection and importing the data from Oracle TABLES/ Views. I just want know how to view the tables/views available in Oracle. (I have the login details). Can I view thru TOAD? Pl let me know the best way and suggestions/ views / Links/ whitepagers.
Regards,

Hi,
I don't remember exacly: RSA1 -> source system -> "replicate datasources". Works this also in a DB-source system. I think so.
=> you get all tables that your user has authorisation.
This function execute for example (in oracle there are same information tables: dba_tables, user_tables ...) following select in the database:
select TABLE_NAME from DBA_TABLES;
Sven

HOW TO VIEW THE ENABLED AUTO EXTENDS FOR THE DBF

Similar Messages

Maybe you are looking for