How to work and export uncompress qt?

hi
i had an off-line editing session where i did color correction on avid symphony and got a digibeta version and dv version of my footage. i also got a qt file straight out of the avid. its 20 GB and it 11 minutes long.
its 576X768 sq pixels PAL. 25 fps.
its on a lacie fw 400 external drive.
how do i work with that on fcp ? which sequence settings ?
will exporting that to DVD via compressor yield better results than using the DV version ?
thanx
Nir

hi
i had an off-line editing session where i did color correction on avid symphony and got a digibeta version and dv version of my footage. i also got a qt file straight out of the avid. its 20 GB and it 11 minutes long.
its 576X768 sq pixels PAL. 25 fps.
its on a lacie fw 400 external drive.
how do i work with that on fcp ? which sequence settings ?
will exporting that to DVD via compressor yield better results than using the DV version ?
thanx
Nir

Similar Messages

  • I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

    I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

    video
    What version of Premiere Elements do you have and on what computer operating system is it running?
    Please review the following workflow.
    ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
    But please also determine if your project goal is supported by
    a. format of your source
    and
    b. computer resources
    More later based on details that you will post.
    ATR

  • How to import and export the screen parameters

    hi all
    how to import and export the parameters of the screen
    i need to export all the parameters and then import it
    and also how to export and import a variable to the memory
    thanks and regards
    naval bhatt

    Hi,
    Check this example for exporting and importing to memory..
    DATA: V_VALUE(2) VALUE '2'.
    EXPORT V_VALUE = V_VALUE TO MEMORY ID 'ZTEST'.
    IMPORT V_VALUE = V_VALUE FROM MEMORY ID 'ZTEST'.
    Thanks,
    Naren

  • Just set-up my first IPad (Air) using ICloud.  This resulted in none of my desktop Outlook icons working.  Can anyone tell me how ICloud works and restore functional Outlook icons on my desktop.

    Just set-up my first IPad (Air) using ICloud.  This resulted in none of my desktop Outlook icons working.  Can anyone tell me how ICloud works and restore functional Outlook icons on my desktop?

    Just set-up my first IPad (Air) using ICloud.  This resulted in none of my desktop Outlook icons working.  Can anyone tell me how ICloud works and restore functional Outlook icons on my desktop?

  • How do I copy photos from iphoto to an sd card. Copy doesn't work and export doesn't work.

    I have tried to copy photos to an SD drive on my macbook pro from iphoto. Copy does not work and I get an error when I try export. Can this be done?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what happens when you try to drag and drop from the Finder? Any messages?
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • How to find and export all Scheduled Tasks in Domain with multiple servers.

    Hi everyone,
    I have been given a task of finding all of Scheduled Tasks in the Domain on all of the servers. So far I have manage to create a script that will pull out all Scheduled Tasks from one Server, in this case Domain Controller. 
    Butt in my company are more than 150 servers so I am looking for a script that can connect to AD (or LDAP), than to certain OUs, then pull out Server list and than query them for Schedule Task. I have found already some scripts online and tried to adjust
    them butt they simply didnt work.
    I am new in the company and still learning about the system,  this is my first real task so any help will be greatly appreciated.

    Just a tip that I found after running across this myself - if you run a
    Get-AdComputer -filter {operatingsystem -like '*server*'} | ft name | out-file servers.txt
    and then save the output to a text file, it may look good, but there may be white space at the end of the computer names. Make sure that only the computernames are in the file and then the script works great.
    http://absoblogginlutely.net
    This would happen because you are trying to get around the format of the output.  When you want the raw value do it this way;  it is faster and easier:
    Get-AdComputer -filter {operatingsystem -like '*server*'} |
         %{$_.Name } | out-file servers.txt
    Now there can never be any extra spaces and there will be no header to cause problems. 
    This is why it pays to spend time studying the details of how PowerShell works instead of just sticking things together until you get a result.  PowerShell is designed to do all of these things without fudging or guesswork but it requires that you actually
    learn how it works.  I highly recommend stating with a good technical book on PowerShell.
    ¯\_(ツ)_/¯

  • How to create and export a sharepoint list connection file to excel connection file library from power pivot?

    Hi All,
    I'm new to SharePoint and Power BI.
    I've to use  share point 2013 lists to create power view reports. For that, I need to create Power Pivot in Excel 2013.
    I'm fine with the above. We normally take a data feed of a list and create connection to that. We need to create a connection file (.odc) and export it into a excel file connection library of Share point. The connection to be made to share point list. The
    power pivot will be having multiple related lists.
    How can I create a connection file which is referring to share point list
    Please suggest.
    Regards,
    Julie

    Hi All,
    Finally, I could find the answer for this question after a long search.
    First of all, open a new excel file in server.
    Data-->From other connection-->From data connection wizard-->data feed-->Location of the data feed-->
    http://sharepointsite/sitename/_vti_bin/ListData.svc
    -->next-->select the lists which you need-->next-->only create connection-->properties--->export connection file
    -->ok
    The connection file has been created and .odc file exported to the specified location.
    Open power pivot and check the connection in existing connections.
    Exported file has to be uploaded in Excel file connection library of share point 2013. So that you can refer the same in this excel file when you upload it into share point.
    Regards,
    Julie

  • Any Complete Tutorials On How To Edit And Export MIDI Files In GB?

    Hi. A friend sent me about 25 nice standard MIDI files that all open fine in QT Pro. She wants me to drag and drop them into GarageBand 2, attempt to edit them, change sounds and then export them out as the edited versions, key changes, added bars, change instrument sounds, etc,. Although I'm a trained musician who understands form, I really don't have a clue on how to use GB to edit and export standard MIDI files. Can this be done effectively in GB ver 2 or 3?
    Basically what she then wants to do is take the edited MIDI tracks, put them into itunes I guess on her iBook G4 or Ipod and do a solo act playing her keyboard live and usibg the MIDI tracks as background.
    Are there any links to step by step tutorials on how I can lerarn this procedure? Please offer any advice and links if you can and thanks for your help
    steveb

    Not really practical, I'm afraid. Capturing screenshots and cutting them up is possible with Photoshop, but PDF editing is very limited (fix a typo, move a picture).

  • EFax. Can anyone explain how this works and on what printers?

    HP and eFax are rather mum on how this works. Can you set the 6500a + to save incoming faxes? What are the printers that can use this?

    Hello mistercrowley,
    Currently eFax is only available on the Hp Photosmart eStation e All in One Printer C510a. The OfficeJet 6500a Plus has the standard analog fax.
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • 35 mm & 16 mm films... how to capture and export?

    Ok, I shoot a lot of stuff at school on 35mm and 16mm, then get it telecined to a dv tape...
    What is the best way to capture the footage into my computer so I can keep the great picture quality (or, what is the best setting to use since I only have a consumer camcorder at home)?
    Then...
    What are the best export settings to ensure that I keep the best quality I fought for in the above question?
    Basically, I shoot some stuff, edit it, and play it back in class and it looks a thousand times worse than it did on the telecined dv tape...and I want to know how to keep that great image.
    THANK YOU SO MUCH!

    Shooting on 35 and 16...guessing you are in film school. Chapman? Aren't your professors helping at all? I mean, you are shooting 35mm! That ain't cheap.
    Telecining to DV tape? 35mm? Oh, the horror. Well, we telecined 16mm to 3/4"..far worse. And economics and all.
    BEST would be to telecine to D5, capture as DVCPRO HD for offline, then as 10-bit uncompressed HD for online...with the use of a Kona 3 capture card and a SATA Raid...but then we are talking bucks here.
    If you telecined to DV, simply capture as DV/NTSC. That is the best you are going to get with that format...which ain't great. If you could telecine to DVCPRO HD (if your school had that deck) then that would be MUCH better. But working DV/NTSC would be your best bet.
    Shane

  • How to import and export Oracle 10g XE in Ubuntu

    Hello everyone,
    I'm a Linux (Ubuntu) user, I need to import my *.dmp* file in Ubuntu.
    Can someone help me, how can I do this and also how can I export?
    Thanx in advance.
    Talha

    Hi,
    These might help
    https://help.ubuntu.com/community/Oracle10g
    http://www.debian-administration.org/articles/430
    http://www.oracle.com/technology/tech/linux/install/xe-on-kubuntu.html
    http://www.oracle.com/pls/xe102/homepage
    You need set environment variables correctly
    This might help with that and some other minor things
    http://ubuntuforums.org/showpost.php?p=7838671&postcount=4
    And XE comes with Apex version is 2.1.
    You can upgrade it
    http://www.oracle.com/technology/products/database/application_express/html/3.2_and_xe.html
    Get SQL Developer, it is nice tool work with database
    http://www.oracle.com/technology/products/database/sql_developer/index.html
    Br,Jari
    Edited by: jarola on May 3, 2010 12:37 PM
    links corrected

  • How to create and export a still frame from a movie in iMovie 09

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    Are you working in iMovie and realize that certain frames in the movie would be perfect as photographs? Here is how to extract them...
    *To get a still frame from an Event*, right-click on the frame and select "Add Still Frame to Project". The still will be added to the end of the current project. Right click on the still frame in the project and select "Reveal in Finder". You will see a jpeg file that is highlighted. Drag this jpeg file in the finder to the iPhoto icon on your dock.
    *If you want a still from a project*, rather than an event, the process is similar, except you right-click on the frame and select "Add Freeze Frame", and it adds the freeze frame at the end of the clip rather than at the end of the project. Right-click/reveal in Finder, drag JPEG to iPhoto icon in dock.
    *If you are not using iPhoto*, and just want to save to your desktop, click Reveal in Finder as above, then COPY, then PASTE to desktop.
    Hint: If you do not want to clutter up your iMovie Project with stills at the end that you would have to go back and delete, then create a separate iMovie Project just for your stills, and follow the instructions for capturing stills from an Event.
    Note: If you do not have a right mouse button, then control-click will work instead of right-click.
    This is the 1st version of this tip. It was submitted on Dec 5, 2009 by AppleMan1958.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    First, click iMovie/About and see which version you have.
    Versoon 9.0.2 would be iMovie 11.
    Follow the instructions [in this post|http://discussions.apple.com/message.jspa?messageID=13065602#13065602]
    If you have Version 8.0.6, that is iMovie 09 and you should see the Reveal In Finder option.

  • How do I learn how iPhoto works and how to use it?

    It took me a long, long time to master (my definition of master will differ from yours) iPhoto 9 but 11 has me stymied. Where is the tutorial for 11? Also how do I disable faces and places permanently? Thanks

    Welcome to the Apple Discussions. The only way to disable Faces is a workaround that I worked out. Here's how:
    1 - open the library like this.
    2 - in the Database folder move this file to the Trash: Faces.db.
    3 - close the package/folder and launch iPhoto. Close it after a moment.
    4 - open the package, find the new version of the file and lock it via the Info window for the file.
    Click to view full size
    5 - while viewing the contents of the package type Command+F to start a search.
    6 - set the criteria of the search to: Kind is Image and Name Contains "face".
    7 - select all of the files in the search results window and drag to the Trash.
    8 -close the package and launch iPhoto.
    You will get the faces spinning wheel as it tries to index the library the first time it's opened but it won't be able to write to the database file if you should try to add a face and won't create any new jpeg faces files.
    *Of course make a backup of your library before trying this and no guarantee implied*.
    Be sure to send a feature request for a way to disable Faces to Apple via http://www.apple.com/feedback/iphoto.html.
    Also this Apple tutorial page may help: http://www.apple.com/support/iphoto/
    as well as these videos: http://www.apple.com/ilife/video-showcase/
    OT

  • How to tack and export versions.

    As the title says I can't figure out a smooth way to export a serie of versions (to be burned or mailed)that exist besides the masters in a project. When I select all the images and ask for "export versions" it doesn't work like that: the masters are exported too Also, when I try to select manualy with a \ they are tacked with a 5 stars rating. I don't understand that either. Could somebody help me out?

    There isn't one built in, but copy the following into Script Editor. In Aperture, open all the Stacks and select the last image. Then run the script.
    tell application "Aperture" to activate
    tell application "System Events"
    if UI elements enabled then
    tell process "Aperture"
    repeat 10 times
    keystroke "\" using command down
    delay 2
    key code 123
    delay 1
    end repeat
    end tell
    else
    tell application "System Preferences"
    activate
    set current pane to pane "com.apple.preference.universalaccess"
    display dialog "UI element scripting is not enabled. Check \"Enable access for assistive devices\""
    end tell
    end if
    end tell
    Ian

  • How to fill and export a table from a FM

    Hi!
    I'm using the function builder, and want to export a table which is filled in the FM.
    This is from the header in my FM:
    EXPORTING
    *" VALUE(T_RESULT_EXPORT) LIKE ZT_RESULT STRUCTURE
    *" ZTKG_RESULT
    I have the parameter name for a table T_RESULT_EXPORT in the Export section. How can I fill the table with data? I get an compiler error saying "T_RESULT_EXPORT is not an internal table - the OCCURS n specification is missing".
    All I want to do is filling my export table.

    adding to the above,
    if u want to still use it in export section.
    declare ur
    internal table like this.
    data : T_RESULT_EXPORT LIKE ZT_RESULT occurs 0.
    then
    pass T_RESULT_EXPORT in the FM
    rgds
    anver
    if hlped mark points

Maybe you are looking for