How to write the expression for multiple texbox selection using single textbox status
Hii frnz,
can you see the below image if the value of the text box is stopped means Red i want to display the entire row(all the texboxs values should be displayd in the red colour only) should be display in Red colour only.
How to implemet it is in SSRS reporting side.....
Thanks ! In Advance....
Just give an expression as below for the color property
=IIf(Me.Value = "Stopped","Red","Green")
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Similar Messages
-
How to write the code for a panel when using treeview?
Hi,
We are developing a new plug-in in Indesign as based on treeview. we have completed the design part, but we have some doubts in coding..
One dialog widget and three panels(General, fitting, Eventsandscripts).
The .fr file:
resource GeneralPanelWidget (kGeneralPanelResourceID)
__FILE__, __LINE__,
kGeneralPanelWidgetID, // WidgetId
kPMRsrcID_None, // RsrcId
kBindNone, // Frame binding
Frame(0,0,800,500) // Frame
kTrue, // Visible
kTrue, // Enabled
kGeneralPanelTitleKey, // Panel name
StaticTextWidget
kInvalidWidgetID, // WidgetId (default=0)
kSysStaticTextPMRsrcId, // RsrcId
kBindNone, // Frame binding
10, 15, 138, 35, // Frame: left, top, right, bottom.
kTrue, kTrue, // Visible, Enabled
kAlignLeft, kEllipsizeEnd,kTrue, // Alignment, ellipsize style
ksamPrefProjectPathStringKey, // Initial text.
ksamPrefProjectPathTextEditBoxWidgetID // No associated widget
// TextEditBox Widget resource
TextEditBoxWidget
ksamPrefProjectPathTextEditBoxWidgetID, // WidgetId
kSysEditBoxPMRsrcId, // RsrcId
kBindNone, // Frame binding
Frame(140, 15, 420, 35), // Frame (l,t,r,b)
kTrue, kTrue // Visible, Enabled
0, // Widget id of nudge button (0 so we dont get one)
0, 0,// small,large nudge amount
0, // max num chars(0 = no limit)
kFalse,// is read only
kFalse,// should notify each key stroke
kFalse,// range checking enabled
kFalse,// blank entry allowed
0, // Upper bounds
0, // Lower bounds
"", // Initial text
ButtonWidget
ksamChooseProjectButtonWidgetID,
kSysButtonPMRsrcId,
kBindNone,
430, 15, 500, 35,
kTrue, kTrue,
ksamChooseBtnStringKey,
StaticTextWidget
0, // WidgetId (default=0)
kSysStaticTextPMRsrcId, // RsrcId
kBindNone, // Frame binding
10, 45, 138, 65, // Frame: left, top, right, bottom.
kTrue, kTrue, // Visible, Enabled
kAlignLeft, kEllipsizeEnd,kTrue, // Alignment, ellipsize style
ksamPrefImagePathStringKey, // Initial text.
ksamPrefImagePathTextEditBoxWidgetID // No associated widget
// TextEditBox Widget resource
TextEditBoxWidget
ksamPrefImagePathTextEditBoxWidgetID, // WidgetId
kSysEditBoxPMRsrcId, // RsrcId
kBindNone, // Frame binding
Frame(140, 45, 420, 65), // Frame (l,t,r,b)
kTrue, kTrue // Visible, Enabled
0, // Widget id of nudge button (0 so we dont get one)
0, 0,// small,large nudge amount
0, // max num chars(0 = no limit)
kFalse,// is read only
kFalse,// should notify each key stroke
kFalse,// range checking enabled
kFalse,// blank entry allowed
0, // Upper bounds
0, // Lower bounds
"", // Initial text
ButtonWidget
ksamChooseImgpathButtonWidgetID,
kSysButtonPMRsrcId,
kBindNone,
430, 45, 500, 65,
kTrue, kTrue,
ksamChooseBtnStringKey,
StaticTextWidget
0, // WidgetId (default=0)
kSysStaticTextPMRsrcId, // RsrcId
kBindNone, // Frame binding
10, 75, 138, 95, // Frame: left, top, right, bottom.
kTrue, kTrue, // Visible, Enabled
kAlignLeft, kEllipsizeEnd,kTrue, // Alignment, ellipsize style
ksamPrefMasterTempPathStringKey, // Initial text.
ksamPrefMasterTemplatePathTextEditBoxWidgetID // No associated widget
// TextEditBox Widget resource
TextEditBoxWidget
ksamPrefMasterTemplatePathTextEditBoxWidgetID, // WidgetId
kSysEditBoxPMRsrcId, // RsrcId
kBindNone, // Frame 85
Frame(140, 75, 420, 95), // Frame (l,t,r,b)
kTrue, kTrue // Visible, Enabled
0, // Widget id of nudge button (0 so we dont get one)
0, 0,// small,large nudge amount
0, // max num chars(0 = no limit)
kFalse,// is read only
kFalse,// should notify each key stroke
kFalse,// range checking enabled
kFalse,// blank entry allowed
0, // Upper bounds
0, // Lower bounds
"", // Initial text
ButtonWidget
ksamChooseMasterTempButtonWidgetID,
kSysButtonPMRsrcId,
kBindNone,
430, 75, 500, 95,
kTrue, kTrue,
ksamChooseBtnStringKey,
CheckBoxWidget
ksamShowFrameLabelCheckBoxWidgetID, // WidgetId
kSysCheckBoxPMRsrcId, // RsrcId
kBindNone,
Frame( 10, 165, 320, 185) // left, top, right, bottom
kTrue, // Visible
kTrue, // Enabled
kAlignLeft, // Alignment
ksamShowFrameLabelChkBoxTextKey // Initial text
DefaultButtonWidget
kOKButtonWidgetID, // WidgetID
kSysButtonPMRsrcId, // RsrcID
kBindNone, // Binding
320, 380, 390, 400, // Frame (l,t,r,b)
kTrue, kTrue, // Visible, Enabled
ksamPrefSaveStringKey, // Button text
CancelButtonWidget
kCancelButton_WidgetID, // WidgetID
kSysButtonPMRsrcId, // RsrcID
kBindNone, // Binding
400, 380, 470, 400, // Frame (l,t,r,b)
kTrue, kTrue, // Visible, Enabled
ksamPrefCancelStringKey, // Button name
kTrue, // Change to Reset on option-click.
This is for General panel design and we have written the code for this..but we dont know where to call this functions. we implemented this plug-in based on BasicSelectableDialog sample plug-in. please guide me to complete this code.
Thanks in Advance..Your question is not very clear. Have you gone through the PanelTreeView.sdk example in the sdk?
-
How to write the logic for extending Idocs...
Hi,
Can anybody pls explain how to write the logic for extending IDOCs with an example...
Good suggestions can be appreciated..
Regards,
RamHi Ram,
Generally the IDoc user exit is called at the following places:
1) When the control record is read.
2) After each and every segment in the data record
3) At the end of the data segment processing.
The IDoc user exit interface generally imports IDOC_DATA (data record internal table) table. Now the data records in the internal table should appear in the same order as maintained while defining IDoc structure (WE30 transaction). For SAP standard segment SAP code will take care of this. For extended segment you will have to take care of this aspect by appending the Z-segment in the IDOC_DATA table.
You can do this by:
looping at IDOC_DATA table:
- Do a case-endcase fo IDOC_DATA-SEGNAM (This stores the segment
structure as per the hierarchy).
- Within the case for "Z-segment" you can write the logic for appending
the Z-segment to IDOC_DATA-SDATA.
Hope this gives some clue.
Regards,
Gajendra. -
Revision: 10545
Author: [email protected]
Date: 2009-09-23 13:33:21 -0700 (Wed, 23 Sep 2009)
Log Message:
Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts
QE Notes: 2 Mustella tests fail:
components/DataGrid/DataGrid_HaloSkin/Properties/datagrid_properties_columns_halo datagrid_properties_columns_increase0to1_halo
components/DataGrid/DataGrid_SparkSkin/Properties/datagrid_properties_columns datagrid_properties_columns_increase0to1
These fixes get us to measure the embedded fonts correctly when going from 0 columns to a set of columns so rowHeight will be different (and better) in those scenarios
Doc Notes: None
Bugs: SDK-15241
Reviewer: Darrell
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/browser/DataGrid
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-15241
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.asHi Matthias,
Sorry, if this reply seems like a products plug (which it is), but this is really how we solve this software engineering challenge at JKI...
At JKI, we create VI Packages (which are basically installers for LabVIEW instrument drivers and toolkits) of our reusable code (using the package building capabilities of VIPM Professional). We keep a VI Package Configuration file (that includes a copy of the actual packages) in each of our project folders (and check it into source code control just as we do for all our project files). We also use VIPM Enterprise to distribute new VI Packages over the network.
Also, as others have mentioned, we use the JKI TortoiseSVN Tool to make it easy to use TortoiseSVN directly from LabVIEW.
Please feel free to contact JKI if you have any specific questions about these products.
Thanks,
-Jim -
How to write the expression when create the calculated column?
Dear,
I want to create some calculated column in my attribute view, but I don't know how to write the code in the expression, is there any introduction about this part, how to use those function and how about the grammar in this expression code ? or is there any example about this calculated column?
Thanks for your sincerely answer.Hi Zongjie,
you can find some information about the creation of calculated columns in the HANA Modeling Guide (http://help.sap.com/hana/SAP_HANA_Modeling_Guide_for_SAP_HANA_Studio_en.pdf).
Within chapter 6.2.1 (Create Analytic Views) you can see under point 7 some basics and also a simple example. The same is also valid for Calculation Views.
Chapter 8.9 (Using Functions in Expressions) describes the different available functions.
You also can use the integrated search in the HANA Studio by clicking the "?" button in the button left corner. Then you get some links in the side panel with related information.
In general you can write your expression manually or you can just drag and drop the functions, elements, operators into the editor window. For example if you drag and drop the "if" function into the editor window you get "if(intarg,arg2,arg3)" inserted. The arguments can be replaced manually or also by drag and drop.
It is also worse to use the "Validate Syntax" button on top of the editor window. It gives you directly a feedback if your expression syntax is correct. If not you get some helpful information about the problem (ok, sometimes it is a little bit confusing because of the cryptic error message format ).
Best Regards,
Florian -
How to create the request for change of selection text into other language.
Hi,
In my object requirement is that when login through Japanese language, then on selection screen selection text should appear in Japanese language. For that I have maintained the text in Japanese language the program where we define the selection text there from translation I have maintained the text in Japanese but while maintain the text it didn't ask me for REQUEST, because of that I am not able to transport the changes to next system, so I want know how to create the request for this case.
ThanksHello Chetan,
You could goto the selection screen texts by goto-> selection texts,
Then you could again goto -> Translation
or
Other-> Translation(Not sure )
Then double click on the Program you should be able to see the Texts that need translation, now change something save and come back and try to activate, now it should propose for a new Transport Request.
Either create a new transaport request or give one that you have given for the program.
Hope the issue is resolved. -
How ti write BRF+ rule for multiple outputs?
1.I have to get 3 outputs in ruleset.
2.Created one descion table and displayed 3 outputs.
3.For Function binded one table with 3 out puts.
4.I have to pass values from descion tbale to function output through rule set?
How can i write the rule?i CREATED NEW APPLICATION AND TRY TO CREATE NEW RULE.
ITS SHOWING SAME ERROR.
AOA (Data Object) : Multiple use of identical objects (AOA and STAMP_DUTY_TABLE-SD_STRUCTURE-AOA) in sets context/temporary ruleset variable not allowed (Detail) Display Help
FORM2_2 (Data Object) : Multiple use of identical objects (FORM2_2 and STAMP_DUTY_TABLE-SD_STRUCTURE-FORM2_2) in sets context/temporary ruleset variable not allowed (Detail) Display Help
MOA (Data Object) : Multiple use of identical objects (MOA and STAMP_DUTY_TABLE-SD_STRUCTURE-MOA) in sets context/temporary ruleset variable not allowed (Detail) Display Help -
How to save the data for multiple sittings
Hello All
i have one sign up form. user enter only 4 to 5 fields & he may not fill the the manditory field & he left. but data base don’t give the error to him. but next day he will come at then he want to complet his sign up i.e. when he commit the all detail that time all validation will hapen.
for that i use one table without constrain to store the temarory detail.& use other table (with constrains) for final submition.
1) i creat the view n entity for temparory table
2) & also i create views n entity for Final table
n i create one methos in AmImple file in that file I create one method & expose to client n I drag n drop this method as a ADF Button & in that method I write the following logic
1) taking the data from one view (from temporary table) & setting the value to other view(Final table).
using this i set the value from tempary to final table...
but when user left the manditory field then it allow to submit the data in temparory field but when i copy that data to final table(with constrain) n user submit the data then validation happn i.e. "this fild is mandatory".when i click this error message it goes to first screen.
I try to implement this functionality…but its not working.
can u plz suggest other way to implement this functionality in ADF using jdevloper11g
Thanks in AdvanceUser,
I don't get it :-(
How do you find out if a user comes back or is completely new? You have to have some information about the user to remember him. At least this information has to be mandatory (even for the temporary table).
Let's assume you have figured out that the user has been on your page before:
load his credentials from the temporary table to the form, let him fill in the rest and if he hit save save it in the final table.
Timo -
How i write the structure for idoc.
hi gurus,
how i write sthructure of an idoc segment.
how i define internal table for header and item level data.
please guid me with an example.
please provide me some programme or threads where programme is wriiten for saving the data through idoc into db.
thanks and regards.
Edited by: Pawan Kumar on Feb 20, 2008 3:14 PM1. In IDOC type you will be having segments and each segments contains fields
2. When ever you want to create an IDOC, first you have to fill the segments (Fields) with data.
Example:
move-corresponding mard to e1mardm. -> here we are transfer some of the mard data to segmnet e1mardm.
(mass movement)
e1mardm-msgfn = mardkey-msgfn. -> here we are filling the data to segments on fields basis.
I think now it clear to you.
Thanks, -
How to write the code for IMPORT and export in Field exit
Hi,
Using the FB01 tcode with condition as document type (ZF) and company code
i want to substitute values should come in the next screen.
i am passin the document type and the company code in the FB01 initial screen (100) and added field exit for Cost centre.
if the Doc type ZF and company code is 0245 then the field exit shoul trigger and give the defaul cost centre value if it contain any cost centre valu it over write the existing if it is empty i will write the defauls cost centre value.
Thanks & Regards,
Nelsons......Hi,
As i have understood, if ur doc type is ZF and company code is 0245, then you want to pass the value to cost centre field in next screen.
You can use program RSMODPRF. here enter the data element of cost centre field and assign the screen no and program name (for FI docs prg name would be SAPMF05A).
After assigning program and screen no , Create the function module where u have to write an 'if' statement for assigning value to cost centre (i.e export field in FM)
the values for company code and document type can be fetched from their respective parameter ids i.e. BUK and BAR.
Regards,
Seema Jaisinghani -
How to write the query for year revenue and avg
Hello Team
I have the table
create table sale (sale_id varchar2(32) not null, sale_epoch_microsec numeric(18,0)
not null, sale_amount_cents numeric(18,0) not null, customer_id varchar2(32)
not null, industry_id varchar2(32) not null, product_id varchar2(32) not null)The industry the customer is considered to be in can change from sale to sale. sale_epoch_microsec is microseconds since epoch; sale_amount_cents is the value of the sale in pennies.
The data in this is:
Insert into SALE
(SALE_ID, SALE_EPOCH_MICROSEC, SALE_AMOUNT_CENTS, CUSTOMER_ID, INDUSTRY_ID,
PRODUCT_ID)
Values
('s1', 200000000, 69985484589459, 'c1', 'i1',
'p1');
Insert into SALE
(SALE_ID, SALE_EPOCH_MICROSEC, SALE_AMOUNT_CENTS, CUSTOMER_ID, INDUSTRY_ID,
PRODUCT_ID)
Values
('s2', 200000000, 69985484589459, 'c2', 'i2',
'p2');
Insert into SALE
(SALE_ID, SALE_EPOCH_MICROSEC, SALE_AMOUNT_CENTS, CUSTOMER_ID, INDUSTRY_ID,
PRODUCT_ID)
Values
('s3', 6579000000, 6.99675342390895E16, 'c3', 'i3',
'p3');
Insert into SALE
(SALE_ID, SALE_EPOCH_MICROSEC, SALE_AMOUNT_CENTS, CUSTOMER_ID, INDUSTRY_ID,
PRODUCT_ID)
Values
('s4', 6.5866459684979E17, 6.99675343454391E17, 'c4', 'i4',
'p4');
1.) SQL: Write the SQL query to determine, year-over-year, the total revenue and avg. per-product revenue from customers in the 'Gaming' industry.josh1612 wrote:
As in the question it's mentioned that the date is in microseconds,
So i need the guidence to convert that to the date .Convert microseconds to seconds and then you may be able to use the function below which was found here:
http://www.oracle.com/technology/pub/articles/oracle_php_cookbook/fuecks_dates.html
CREATE OR REPLACE
FUNCTION unixts_to_date(unixts IN PLS_INTEGER) RETURN DATE IS
* Converts a UNIX timestamp into an Oracle DATE
unix_epoch DATE := TO_DATE('19700101000000','YYYYMMDDHH24MISS');
max_ts PLS_INTEGER := 2145916799; -- 2938-12-31 23:59:59
min_ts PLS_INTEGER := -2114380800; -- 1903-01-01 00:00:00
oracle_date DATE;
BEGIN
IF unixts > max_ts THEN
RAISE_APPLICATION_ERROR(
-20901,
'UNIX timestamp too large for 32 bit limit'
ELSIF unixts < min_ts THEN
RAISE_APPLICATION_ERROR(
-20901,
'UNIX timestamp too small for 32 bit limit' );
ELSE
oracle_date := unix_epoch + NUMTODSINTERVAL(unixts, 'SECOND');
END IF;
RETURN (oracle_date);
END; -
How to write the SQL for the following
ID PRODUCT LEAD_FLAG SALES_VOLUME
1 A Y 100
1 B N 200
1 C N 300
1 D N 400
2 A N 10
2 B Y 20
2 C N 30
2 D N 40
I need to calculate the incentive for each ID. The rule is for an ID:
if the the lead flag for a product is N, then check the sales_volume of the product whose lead_flag is Y (product A in case of ID 1, product B in case of ID 2). if the sales_volume of the product with lead_flag = Y is greater than a NUMBER (this NUMBER varies from product to product. for product A it is 20, for product B it is 25, C it is 30 and D it is 40) then incentive = (sales_volume of the product with lead flag N) * 100.Hello, I presume the NUMBER you refer to will be held in a table column somewhere? I'm calling it threshold_num in the test data below (and rec_id instead of ID):
WITH test_data AS (
SELECT 1 REC_ID, 'A' PRODUCT, 'Y' LEAD_FLAG, 100 SALES_VOLUME FROM DUAL UNION ALL
SELECT 1, 'B','N', 200 FROM DUAL UNION ALL
SELECT 1, 'C','N', 300 FROM DUAL UNION ALL
SELECT 1, 'D','N', 400 FROM DUAL UNION ALL
SELECT 2, 'A','N', 10 FROM DUAL UNION ALL
SELECT 2, 'B','Y', 20 FROM DUAL UNION ALL
SELECT 2, 'C','N', 30 FROM DUAL UNION ALL
SELECT 2, 'D','N', 40 FROM DUAL),
test_ref_data AS (
SELECT 'A' PRODUCT, 20 threshold_num FROM DUAL UNION ALL
SELECT 'B', 25 FROM DUAL UNION ALL
SELECT 'C', 30 FROM DUAL UNION ALL
SELECT 'D', 40 FROM DUAL)
-- end test data
SELECT td1.REC_ID, td1.PRODUCT, CASE WHEN td2.PRODUCT IS NOT NULL THEN td1.sales_volume * 100 ELSE 0 END incentive
FROM test_data td1
LEFT JOIN (
SELECT td2.PRODUCT, SUM(sales_volume) sales_volume
FROM test_data td2
JOIN test_ref_data trd
ON (td2.PRODUCT = trd.PRODUCT)
WHERE td2.lead_flag = 'Y'
GROUP BY td2.PRODUCT, trd.threshold_num HAVING SUM(td2.sales_volume) > trd.threshold_num) td2
ON (td1.PRODUCT = td2.PRODUCT)
WHERE td1.lead_flag = 'N';
REC_ID PROD INCENTIVE
2 A 1000
2 D 0
1 D 0
1 B 0
2 C 0
1 C 0
6 rows selected.And two tips: it's always helps to put {noformat}{noformat} before and after your code for readability, and also to provide expected sample output. -
How to generate mutiple Results for multiple SQL SELECT statements
I just downloaded SQL Developer 1.5 and play around with it.
On a daily basis, I need run 4 different SELECT statements and dump the output of each SELECT into an CSV file and send to some users. In SQL Navigator, I can select all 4 SELECT statements and execute them at same time. Once all complete, I will see 4 tabs, each represent the output for each SELECT statement. Then I can export output from each tab into a CSV file.
It seems that SQL Developer 1.5 still can't run mutiple SELECT statements and display the output of each statement into a separate "Results" tab so that I can export the data into multiple CSV files easily.
Right now, I have to hightlight each SELECT statement and press F9, then export the output data into CSV.
I wish I can execute 4 SELECT statements all in once on SQL Developer and get all the output data and export 4 times into 4 CSV files.
Thanks!
KevinHow about doing it as a set of tabs within the Resuls Tab?
So you would have your Top row of tabs:
Results, Script Output, Explain, AutoTrace, DBMS Output and OWA Output
Then When you have the Results tab selected you could have a row of tabs beneath the Top row with one tab for each result set. Switching between result sets should switch which section of SQL is highlighted as the "Current SQL".
A similar mechinism could be employed for each of the top level tabs where it makes sense to have multiple output tabs.
A further refinement of this feature might be to allow the result tabs to be dockable within the parent tab so that multiple result tabs can be viewed simultaneously. This way 2 or more explain plans (for example) could be visually compared without requiring the code to exist in two separate code panes. -
How to write json body for multiple list items to write in a list.
Hi,
I am trying to create list items using REST API, and I am reading the data from Sales force and writing it to the list. For wring sigle item its working fine, but if i am trying to insert multiple data to the list using rest API I am getting bad server requesrt
status code as 400.
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(args[0] + "/_api/web/lists/GetByTitle('Contacts')/items");
request.Method = "POST";
request.Accept = "application/json;odata=verbose";
request.ContentType = "application/json;odata=verbose";
request.Headers.Add("X-RequestDigest: " + requestDigest);
request.Headers.Add("Cookie: " + cookies);
string body = "{ '__metadata': { 'type': 'SP.Data.ContactsListItem' }, 'Title': 'Ravish', 'FirstName': 'Verma'}";
byte[] buf = Encoding.UTF8.GetBytes(body);
request.ContentLength = buf.Length;
request.GetRequestStream().Write(buf, 0, buf.Length);
var response = (HttpWebResponse)request.GetResponse();
In the above code highlighted, line of code works fine, for single item, but if I am giving string values as
string body = "{ '__metadata': { 'type': 'SP.Data.ContactsListItem' }, [{'Title': 'Ravish', 'FirstName': 'Verma'},{'Title': 'Verma', 'FirstName': 'Ravish'}]}";
string body = "{ '__metadata': { 'type': 'SP.Data.ContactsListItem' }, [{'Title': 'Amireddy', 'FirstName': 'Kishore'},{'Title': 'Amireddy', 'FirstName': 'Kishore'}]}";
string test = "{ '__metadata': { 'type': 'SP.Data.ContactsListItem' }, 'Title': 'Amireddy', 'FirstName': 'Kishore'}";
string body = "{ '__metadata': { 'type': 'SP.Data.ContactsListItem' }, 'Title': 'Ravish', 'FirstName': 'Verma'}";
All the above format give bad server request.
if any one has the idea to send multiple items in the request body, please provide me the sample code.
Thanks in Advance.The SharePoint 2013 REST API does not support "batch" or multiple inserts in one call at this time.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer -
How to write the code for screen-exits
halo fellow SAPiens,
I want to add a screen for t-code AS01......for which i have created a sub-screen in the function grp (related to AS01)........now i need to link the sub-screen with the Standard SAP prgm..........i.e call the sub-screen........how can i do it...........pls send me one example for implementing menu-exits,screen exits and
Screen exits - Urgent.
screen exits
Screen exit
Please reward points if helpful...
Maybe you are looking for
-
Having trouble finding the height of a Binary Tree
Hi, I have an ADT class called DigitalTree that uses Nodes to form a binary tree; each subtree only has two children at most. Each node has a "key" that is just a long value and is placed in the correct position on the tree determined by its binary v
-
Cut-out shape from jpeg in Illustrator CS2
Hi, I would like to "cut out" a dollar sign ($) shape from a jpeg image so that I can "see through" the dollar sign to what is behind it. I have attempted to do this several times using the Compound path tool, Divide objects below, and everything els
-
Connection to a remote speaker almost impossible
Ive just bought an Airport Express few weeks ago and its still almost impossible to get a reliable connection to the remote speaker from within iTune 5.01. The Airport Express is connected as remote station to an Airport Extreme base using WDS. Whe
-
I have a list component (AS2) populated from an XML file. The XML file contains the identifier for the appropriate icon which is contained in the library. This works. What I would like to do is include a URL leading to a JPG file and have this JPG us
-
While compiling .pll file , plx file is not creating .
Hi , While i try to compile .pll file in oracle forms 6i in my local machine , it is compiling without errors . but it is not generating .plx file. Can any one please tell me what could be the reason. Thanks in advance, Sanjeev.