How to write the script in E-tester

Hi i am new to e-tester. we are doing some R&D on empirix e-tester tool. We are familiar with QTP tool. we are able to record and play the script but we are unable to enhance the script.
But when i went through this threads i came to know that we can use VBA script or VB script or etc for enhancing the script. current we are using "oracle Functional Testing for web applications 8.50.0260" version.
Can any body please guide me and explain the procedure for enhancing the script and what is the use of open script.
Is it required for e-load or e-tester. pls specify me its very urgent
thanks inadvance...........pls

Hi Alex,
Nice reply, I need one more clarification. when installing OFT 8.5 software do we require any other software or any other set or funda for that. I am able to add some vbscript in test scrplet but when execution comes to that point node its getting halted and result is getting failed.
can i take any precautions or any hierarchy or guidelines i need maintaing before writing the script on the scriplet.
please give me the procedure. sorry for repeatedly asking as it's very important i have been raising the same question from couple of days.
code i have writte over there
msgbox("anjani")
dim a=10
dim b=20
dim c=a+b
msgbox c
pls pass your mail id we can discuss later also my id is [email protected] plssssssssss
anjani

Similar Messages

How to write the script to watch InDesign actions?

Hi All,
I'd like to write a script or a .Net tool to watch the InDesign actions and alert the user for any deviations like the option 'Live Preflight' in InDesign CS4? Pl. suggest.
Thanks,
Praveen

Hi Alex,
Nice reply, I need one more clarification. when installing OFT 8.5 software do we require any other software or any other set or funda for that. I am able to add some vbscript in test scrplet but when execution comes to that point node its getting halted and result is getting failed.
can i take any precautions or any hierarchy or guidelines i need maintaing before writing the script on the scriplet.
please give me the procedure. sorry for repeatedly asking as it's very important i have been raising the same question from couple of days.
code i have writte over there
msgbox("anjani")
dim a=10
dim b=20
dim c=a+b
msgbox c
pls pass your mail id we can discuss later also my id is [email protected] plssssssssss
anjani

I am new in indesign scripting, please tell me how to write a script to get content of a element in xml and then sort all the content

I am new in indesign scripting, please tell me how to write a script to get content of a element in xml and then sort all the content

Hi,
May the below code is useful for you, but I dont know how to sort.
Edit the tag as per your job request.
alert(app.activeDocument.xmlElements[0].contents)
//Second alert
var xe = app.activeDocument.xmlElements[0].evaluateXPathExpression("//marginalnote");
alert(xe.length)
for(i=0; i<xe.length; i++)
alert(xe[i].texts[0].contents)
Regards
Siraj

How to print the script in condensed mode

Hi to all,
Pls help me.
How to print the script in condensed mode and particular window only print in the condensed mode.

Hi,
Hi
It will remove the blank spaces in front of the variable
and if you use the extension NO-GAPS
It will remove all the blank spaces in the variable field.
DATA: ws_val1 type char12.
ws_val1 = ' 100 123'.
Condense ws_val1.
Write / ws_val1.
Condense ws_val1 no-gaps.
write / ws_val1.
It will give output as
100 123
100123
The CONDENSE statement deletes redundant spaces from a string:
CONDENSE c NO-GAPS.
This statement removes any leading blanks in the field c and replaces other sequences of blanks by exactly one blank. The result is a left-justified sequence of words, each separated by one blank. If the addition NO-GAPS is specified, all blanks are removed.
Please check this link for sample code.
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb33e6358411d1829f0000e829fbfe/content.htm
Regards,
Raj.

How to write Java Scripts in Apex

Hi All,
Can any on tell me how to write Java Scripts in Apex.
Thanks in Advance,
Mukund

If you want to link your custom JavaScripts to an Apex page, you have several options:
1. Add an HTML Region on Page 0 (Script will be written to every page) called something like "JavaScript & CSS". In this region add your Script to the region source like this:
<script language="JavaScript">
function hell ()
alert ("Hello World");
</script>
2. Add a similar region to the page you are working on (can only be accessed on this page)
3. Create an external JavaScript file and either load it into the WORKSPACE or into the images (/i/) directory on the server. You can then link the JS into you page via modifying the Page Template.
Hope that makes sense. Let me know if you want any further help with option 3.
Duncs

How to write the start routine in the transformations ?

Hi Experts,
I am working on BI 7, As I want to write a start routine in transformations of 0FIGL_O02 DSO, to allow the GL accounts with cost center data. Already there is a delete statement please find.
*DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'. I had made comment to allow the G/L accounts. since I have some GL Accounts which does'nt have the cost center data, so in this case I have to write a ABAP code to allow this G/L accounts with cost center data.
So Let me know if anyone can help me how to write the ABAP code in the start routine.
Thanks
sekhar

Hi Experts,
I am working on BI 7, As I want to write a start routine in transformations of 0FIGL_O02 DSO, to allow the GL accounts with cost center data. Already there is a delete statement please find.
*DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'. I had made comment to allow the G/L accounts. since I have some GL Accounts which does'nt have the cost center data, so in this case I have to write a ABAP code to allow this G/L accounts with cost center data.
So Let me know if anyone can help me how to write the ABAP code in the start routine.
Thanks
sekhar

How to write the expression when create the calculated column?

Dear,
I want to create some calculated column in my attribute view, but I don't know how to write the code in the expression, is there any introduction about this part, how to use those function and how about the grammar in this expression code ? or is there any example about this calculated column?
Thanks for your sincerely answer.

Hi Zongjie,
you can find some information about the creation of calculated columns in the HANA Modeling Guide (http://help.sap.com/hana/SAP_HANA_Modeling_Guide_for_SAP_HANA_Studio_en.pdf).
Within chapter 6.2.1 (Create Analytic Views) you can see under point 7 some basics and also a simple example. The same is also valid for Calculation Views.
Chapter 8.9 (Using Functions in Expressions) describes the different available functions.
You also can use the integrated search in the HANA Studio by clicking the "?" button in the button left corner. Then you get some links in the side panel with related information.
In general you can write your expression manually or you can just drag and drop the functions, elements, operators into the editor window. For example if you drag and drop the "if" function into the editor window you get "if(intarg,arg2,arg3)" inserted. The arguments can be replaced manually or also by drag and drop.
It is also worse to use the "Validate Syntax" button on top of the editor window. It gives you directly a feedback if your expression syntax is correct. If not you get some helpful information about the problem (ok, sometimes it is a little bit confusing because of the cryptic error message format ).
Best Regards,
Florian

How to print the script before realasing?

how to print the script before realasing?

Do you want to see the output of your SAPscript??and print it?? before you release.
Then goto NACE tcode and configure your script.
Example :
Goto Transaction NACE --> Select Application V1(Sales) --> Click on Output Types --> Select the output type as BA00 (as generally BA00 is the output type associated with Sales Order ) --> Double click on the Processing Routines folder on the left and it will display the Form name and the corresponding driver programs name.
Goto tcode VA03, and display the output from menu and do your printing.
Close the thread once your question is answered.
Regards,
SaiRam

How to get the script of a table or view in SQL Developer?

Dear friends/expert,
Could you tell me how to get the script for a view or a table easily in SQL Developer like pressing F4 in TOAD?
I found that I can press SHIFT+F4 for a view in SQL Developer and get the script of the view in Details Tab. But how to move the script to SQL worksheet to edit? It is very easy to do in TOAD.
And I didn't find a way to get the script for a table till now. Is there any way to do that?
Thanks in advance.
Best regards,
Ning

1. Although the team might put a lot of effort in keeping track on the forum, a lot of posts still go by without answer.
2. If you have an enhancement request, log it at the announced SQL Developer Exchange, so others can vote to add weight on the issue. Be clear and detailed in the explanation.
3. Given the structure of the application, I guess it won't be easy (maybe impossible) to add the functionality you are asking. Do you have a suggestion on how to access the info?
4. If your request gets accepted, still another year or two may go by until the functionality gets added. For sure you'll be better off writing a user defined extension or report (querying DBMS_METADATA.GET_DDL).
Hope that helps,
K.
Edited by: -K- on 12/01/2009 09:37

How to write the folder path in standard webi report - Most Accessed Documents

How to write the folder path in standard webi report - Most Accessed Documents
All
   -> Public Folders
                  -> Auditor
                  -> ABCD
I want to give path of folder 'ABCD' and all the reports/ subfolders under it?
Prompt - 'Enter the Folder Path(Add % at the end to include Sub Folders)' ?
Give me exact path syntax

Hi Daniel,
But when I give my URL as
http://serverA:80/irj/portal??NavigationTarget=ROLES://portal_content/crm-practice/14-Feb/Test_Page
I am able to access the iview but the thing is I am getting TLN,Toolarea,Masthead,etc.
I will tell my requirement,
ServerA (EP 7.0) has some iviews,pages...
I need to access these iviews from serverB(EP 6.0)....
In ServerB only the iviews has to be displayed in the content area but not TLN,Toolarea,etc.
Kindly help me in this regard.
Thanks and regards,
Purushothaman.
Message was edited by: Purushothaman Vyasarao

Can you point me to FrameScript samples that do some or all of the following? Or maybe even write the script for me for $$$? :-)

Hi,
I'm brand new to writing FrameScript. I'm looking for example scripts that I can piece together or perhaps you can give me a quote for your cost to write the script for me. Here is a description of basically what needs doing. We have .book files than contain say a cover.fm, multiple chapter.fms, and possibly multiple appendix.fms. (They actually contain more types, but I can expand the script for that.) I don't think here is a consistent way to automatically determine which .fms are of which type, so I was thinking of popping up a dialog box that showed the files in the book and asked the user to identify which files were of which type. This asking could be done all at once, or it could iteratively ask for the first type then run all the processing then ask for the second type, etc, etc.
The processing of each file goes like this:
1) Delete the paragraph and character catalog contents
2) Import all formats, including the new paragraph and character catalogs from correct template file (chapter.fm, appendix.fm, etc)
3) Remap the old paragraph and character tags to the new ones, preferably based on an internal predefined, hard-coded table, but possibly using the "use a remapping table that is in another .fm file" method. It's just that the latter method requires the user to open two more .fms in addition to the several other template files they'll already (correct?) have to have open.
4) Report to the user all tags that are in their file that are not in the new catalogs
Can you point me to pieces? Write the whole thing? Recommend someone who can?
Thanks,
Dave

Dave, if you haven't yet check it out, do visit the Framescript users group, here:
http://groups.yahoo.com/group/framescript-users/
There are several folks who do contract FS work who post their contact info as part of that group (I believe there's a webring also). Also, Rick Quatro has a good e-book "Crash Course" about learning FrameScript (although the book refers to an earlier version, almost all of the concepts are still applicable to the current versions of FS and FM) , check it out at
http://www.frameexpert.com
Sheila

How to write the exceptions in function module

dear all,
how to write the exceptions in function modules with example.
thanq
jyothi

Hi,
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE except.
und
MESSAGE.....RAISING except.
The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
If the calling program does not handle the exception
· The RAISEstatement terminates the program and switches to debugging mode.
· The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION read_spfli_into_table.
""Local Interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
IF sy-subrc NE 0.
MESSAGE e007(at) RAISING not_found.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Calling READ_SPFLI_INTO_TABLE
The following program calls the function module READ_SPFLI_INTO_TABLE:
REPORT demo_mod_tech_fb_read_spfli.
PARAMETERS carrier TYPE s_carr_id.
DATA: jtab TYPE spfli_tab,
wa LIKE LINE OF jtab.
CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
EXPORTING
id = carrier
IMPORTING
itab = jtab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CASE sy-subrc.
WHEN 1.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
WHEN 2.
MESSAGE e702(at).
ENDCASE.
LOOP AT jtab INTO wa.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDLOOP.
The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
Or
just have to decide what exceptions u want and under what conditions.
then declarethese exeptions under the exceptions tab.
in the source code of ur function module.
if
like this u can code .
now when u call the function module in tme mainprogram.
if some error occurs and u have declared a exception for this then it will set sy-subrc = value u give inthe call of this fm.
in the fm u can program these sy-subrc values and trigger the code for ur exception.
Please reward if useful
Regards,
Ravi
Edited by: Ravikanth Alapati on Mar 27, 2008 9:36 AM

How to write the oracle data as XML format. (.XML file)

create or replace procedure pro(p_number )
is
cursor c1 is select *from emp where empno=p_number;
v_file utl_file.file_type;
begin
v_file := utl_file.fopen('dirc','filename.txt','w');
for i in c1 loop
utl_file.put_line(v_file,i.ename || i.empno ||i.job);
end loop;
closef(v_file);
end;
Now my client want instead of .txt file he need .xml files
File should contains xml tags. can any one help regarding this.. with one example.
How to write the oracle data as XML format. (.XML file)

hi,
hope this example will do something....
SQL> select employee_id, first_name, last_name, phone_number
2 from employees where rownum < 6
EMPLOYEE_ID FIRST_NAME LAST_NAME PHONE_NUMBER
100 Steven King 515.123.4567
101 Neena Kochhar 515.123.4568
102 Lex De Haan 515.123.4569
103 Alexander Hunold 590.423.4567
104 Bruce Ernst 590.423.4568
SQL> select dbms_xmlgen.getxml('select employee_id, first_name,
2 last_name, phone_number from employees where rownum < 6') xml
3 from dual;
*<?xml version="1.0"?>*
*<ROWSET>*
*<ROW>*
*<EMPLOYEE_ID>100</EMPLOYEE_ID>*
*<FIRST_NAME>Steven</FIRST_NAME>*
*<LAST_NAME>King</LAST_NAME>*
*<PHONE_NUMBER>515.123.4567</PHONE_NUMBER>*
*</ROW>*
*<ROW>*
*<EMPLOYEE_ID>101</EMPLOYEE_ID>*
*<FIRST_NAME>Neena</FIRST_NAME>*
*<LAST_NAME>Kochhar</LAST_NAME>*
*<PHONE_NUMBER>515.123.4568</PHONE_NUMBER>*
*</ROW>*
*<ROW>*
*<EMPLOYEE_ID>102</EMPLOYEE_ID>*
*<FIRST_NAME>Lex</FIRST_NAME>*
*<LAST_NAME>De Haan</LAST_NAME>*
*<PHONE_NUMBER>515.123.4569</PHONE_NUMBER>*
*</ROW>*
*<ROW>*
*<EMPLOYEE_ID>103</EMPLOYEE_ID>*
*<FIRST_NAME>Alexander</FIRST_NAME>*
*<LAST_NAME>Hunold</LAST_NAME>*
*<PHONE_NUMBER>590.423.4567</PHONE_NUMBER>*
*</ROW>*
*<ROW>*
*<EMPLOYEE_ID>104</EMPLOYEE_ID>*
*<FIRST_NAME>Bruce</FIRST_NAME>*
*<LAST_NAME>Ernst</LAST_NAME>*
*<PHONE_NUMBER>590.423.4568</PHONE_NUMBER>*
*</ROW>*
*</ROWSET>*
ask if you want more assistance.
thanks.

How to write the dynamic code for RadioGroupByKey and Check Boxes?

Hi,
Experts,
I have created a WD ABAP application in that i have used RadioGroupByKey and CheckBox Ui elements but i want how to write the dynamic code to that i want to display male and female to RadioGroupByKey and 10 lables to check boxs.
Please pass me some idea on it and send any documents on it .
Thanks in advance ,
Shabeer ahmed.

Refer this for check box:
Do check :
bind_checked property is bind to a node with cardinality of 1:1
CHECK_BOX_NODE <---node name
-CHECK_BOX_VALUE <--attribute name of type wdy_boolean
put this code under your WDDOMODIFYVIEW:
DATA:
lr_container TYPE REF TO cl_wd_uielement_container,
lr_checkbox TYPE REF TO cl_wd_checkbox.
get a pointer to the RootUIElementContainer
lr_container ?= view->get_element( 'ROOTUIELEMENTCONTAINER' ).
lr_checkbox = cl_wd_checkbox=>new_checkbox(
text = 'WD_Processor'
bind_checked = 'CHECK_BOX_NODE.CHECK_BOX_VALUE'
view = view ).
cl_wd_matrix_data=>new_matrix_data( element = lr_checkbox ).
lr_container->add_child( lr_checkbox ).
Refer this for Radiobutton :
dynamic radio button in web dynpro abao
Edited by: Saurav Mago on Jul 17, 2009 10:43 PM

How to write the nodevalue back to xml file?

Hi, Everybody:
These are two packages I used. javax.xml.parsers.*,org.w3c.dom.*
Now I use "setNodeValue("abc") to set the node value to "abc". But it is not really saved back into XML file. It only change the node value in memory.
How to write the changes back to XML file? Thank you very much for your help.
Michelle

* Version : 1.00
* File Purpose : Given the xml file loads into dom and recreate the file with the updated values.
* Developer : Kashif Qasim : 25/july/04
* Modify detail :
import java.lang.*;
import java.io.*;
import java.util.*;
import java.text.*;
import org.w3c.dom.*;
import org.apache.xerces.parsers.DOMParser;
import org.apache.xerces.*;
public class XMLWriter
private String displayStrings[] = new String[5000];
private int numberDisplayLines = 0;
private Document document;
//private final Node c;
public synchronized void displayDocument(String uri,Vector UpdatedValues,String getTaskID)
try {
DOMParser parser = new DOMParser();
parser.parse(uri);
document = parser.getDocument();
display(document, "",UpdatedValues);
} catch (Exception e) {
e.printStackTrace(System.err);
ReadXmlConfig objReadXmlConfig = null;
FileWriter filewriter = null;
try {
filewriter = new FileWriter(uri);
for(int loopIndex = 0; loopIndex < numberDisplayLines; loopIndex++){
filewriter.write(displayStrings[loopIndex].toCharArray());
//System.out.println("displayStrings[loopIndex].toCharArray() "+displayStrings[loopIndex].toString());
//filewriter.write("\n");
filewriter.close();
System.gc();
objReadXmlConfig = new ReadXmlConfig();
objReadXmlConfig.ITSLog("File updated for "+getTaskID+" succesfully, file is closed now ");
} catch (IOException e) {
System.err.println("Caught IOException: " + e.getMessage());
objReadXmlConfig = new ReadXmlConfig();
objReadXmlConfig.ITSErrorLog("File updated FAILED for "+getTaskID+". Reason for file error "+e.toString());
}finally {
if (filewriter != null) {
System.out.println("Closing File");
objReadXmlConfig =null;
try{
filewriter.close();
}catch(IOException e){
System.err.println("Caught IOException: " + e.getMessage());
} else {
System.out.println("File not open");
private void display(Node node, String indent, Vector UpdtRecs)
if (node == null) {
return;
int type = node.getNodeType();
NodeList nodeList = document.getElementsByTagName("QueryParm");
int TotalRecs = UpdtRecs.size();
switch (type) {
case Node.DOCUMENT_NODE: {
displayStrings[numberDisplayLines] = indent;
displayStrings[numberDisplayLines] +=
"<?xml version=\"1.0\" encoding=\""+
"UTF-8" + "\"?>";
numberDisplayLines++;
displayStrings[numberDisplayLines] += "\n";
display(((Document)node).getDocumentElement(), "",UpdtRecs);
break;
case Node.ELEMENT_NODE: {
if(node.getNodeName().equals("QueryParm")) {
for(int i =0 ; i< nodeList.getLength() ; i++)
Node nodeQry = nodeList.item(i);
NamedNodeMap nnp = nodeQry.getAttributes();
for(int j= 0 ; j < nnp.getLength() ; j++)
Attr atr = (Attr) nnp.item(j);
if(atr.getName().equalsIgnoreCase("value_"+(i+1)))
//System.out.println(atr.getName() +" : " + atr.getNodeValue() );
atr.setNodeValue(UpdtRecs.get(i).toString());
displayStrings[numberDisplayLines] = indent;
displayStrings[numberDisplayLines] += "<";
displayStrings[numberDisplayLines] += node.getNodeName();
int length = (node.getAttributes() != null) ?
node.getAttributes().getLength() : 0;
Attr attributes[] = new Attr[length];
for (int loopIndex = 0; loopIndex < length; loopIndex++) {
attributes[loopIndex] = (Attr)node.getAttributes().item(loopIndex);
for (int loopIndex = 0; loopIndex < attributes.length; loopIndex++) {
Attr attribute = attributes[loopIndex];
displayStrings[numberDisplayLines] += " ";
displayStrings[numberDisplayLines] += attribute.getNodeName();
displayStrings[numberDisplayLines] += "=\"";
displayStrings[numberDisplayLines] += attribute.getNodeValue();
displayStrings[numberDisplayLines] += "\"";
displayStrings[numberDisplayLines]+=">";
numberDisplayLines++;
NodeList childNodes = node.getChildNodes();
if (childNodes != null) {
length = childNodes.getLength();
indent += " ";
for (int loopIndex = 0; loopIndex < length; loopIndex++ ) {
display(childNodes.item(loopIndex), indent,UpdtRecs);
break;
case Node.CDATA_SECTION_NODE: {
displayStrings[numberDisplayLines] = "";
displayStrings[numberDisplayLines] += "<![CDATA[";
displayStrings[numberDisplayLines] += node.getNodeValue();
displayStrings[numberDisplayLines] += "]]>";
numberDisplayLines++;
break;
case Node.TEXT_NODE: {
displayStrings[numberDisplayLines] = "";
String newText = node.getNodeValue().trim();
if(newText.indexOf("\n") < 0 && newText.length() > 0) {
displayStrings[numberDisplayLines] += newText;
displayStrings[numberDisplayLines] += "\n";
numberDisplayLines++;
break;
case Node.PROCESSING_INSTRUCTION_NODE: {
displayStrings[numberDisplayLines] = "";
displayStrings[numberDisplayLines] += "<?";
displayStrings[numberDisplayLines] += node.getNodeName();
String text = node.getNodeValue();
if (text != null && text.length() > 0) {
displayStrings[numberDisplayLines] += text;
displayStrings[numberDisplayLines] += "?>";
displayStrings[numberDisplayLines] += "\n";
numberDisplayLines++;
break;
if (type == Node.ELEMENT_NODE) {
displayStrings[numberDisplayLines] = indent.substring(0,
indent.length() - 4);
displayStrings[numberDisplayLines] += "</";
displayStrings[numberDisplayLines] += node.getNodeName();
displayStrings[numberDisplayLines] += ">";
displayStrings[numberDisplayLines] += "\n";
numberDisplayLines++;
indent += " ";
public static void main(String args[])
Vector xmlValue = new Vector();
xmlValue.add(0,"Kashif");
xmlValue.add(1,"Qasim");
//displayDocument("NewMediation.xml",xmlValue);
<?xml version="1.0" encoding="UTF-8"?>
<Mediation>
<Task1>
<Source>
<SourceDriver>com.microsoft.jdbc.sqlserver.SQLServerDriver</SourceDriver>
<SourceConnection>jdbc:microsoft:sqlserver://10.2.1.58:1433;DatabaseName=MTCVB_HDS;</SourceConnection>
<SourceUser>sa</SourceUser>
<SourcePassword>sa</SourcePassword>
<Table>
<SourceTable>t_Agent</SourceTable>
<SourceQuery><![CDATA[SELECT SkillTargetID,PersonID,PeripheralID,EnterpriseName,PeripheralNumber,Deleted,TemporaryAgent,AgentStateTrace,ChangeStamp FROM t_Agent where SkillTargetID > {value_1} order by SkillTargetID]]>
</SourceQuery>
<SourceParm BusinessRule="" ColumnName="SKILLTARGETID" ColumnNumber="1" DataType="Numeric" DefaultValue="0" Format="mm/dd/yyyy xx:xx:xx XX">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="PERSONID" ColumnNumber="2" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="PERIPHERALID" ColumnNumber="3" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="ENTERPRISENAME" ColumnNumber="4" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="PERIPHERALNUMBER" ColumnNumber="5" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="DELETED" ColumnNumber="6" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="TEMPORARYAGENT" ColumnNumber="7" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="AGENTSTATETRACE" ColumnNumber="8" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="CHANGESTAMP" ColumnNumber="9" DataType="String" DefaultValue="" Format="">
</SourceParm>
<QueryParm FldName_1="SkillTargetID" FldType_1="Number" value_1="0">
</QueryParm>
</Table>
</Source>
</Task1>
</Mediation>
The QueryParm values are updated thru this code :)
Hope it helps u ...

How to write the script in E-tester

Similar Messages

Maybe you are looking for