How to write ticked checkbox data in a servlet to a flat file

I display data on the screen with check boxes beside each name. When i check the neccessary check boxes how can i write only the cked ones to a text file

I display data on the screen with check boxes beside
each name. When i check the neccessary check boxes how
can i write only the cked ones to a text fileTWO THINGS: If you ALREADY have data in the textfields/textareas BEFORE you check the checkbox, then have an Actionlistener ready for the relevant checkbox, so that as soon as its checked:
//In the action listener for the checkbox
String the_data = jTextField.getText();
//Now call your serializer
If you dont have data ready, and you put it on and then check the checkboxes you want or you check the checkbox to enable its jtextfield, then you'll need some other mechanism to activate the serialization through the actionlistener, like a button.
In either case, its the same old story......an ActionListener that just calls a serialization mechanism for a simple string into a file.

Similar Messages

  • How to write the oracle data as XML format. (.XML file)

    create or replace procedure pro(p_number )
    is
    cursor c1 is select *from emp where empno=p_number;
    v_file utl_file.file_type;
    begin
    v_file := utl_file.fopen('dirc','filename.txt','w');
    for i in c1 loop
    utl_file.put_line(v_file,i.ename || i.empno ||i.job);
    end loop;
    closef(v_file);
    end;
    Now my client want instead of .txt file he need .xml files
    File should contains xml tags. can any one help regarding this.. with one example.
    How to write the oracle data as XML format. (.XML file)

    hi,
    hope this example will do something....
    SQL> select employee_id, first_name, last_name, phone_number
    2 from employees where rownum < 6
    EMPLOYEE_ID FIRST_NAME LAST_NAME PHONE_NUMBER
    100 Steven King 515.123.4567
    101 Neena Kochhar 515.123.4568
    102 Lex De Haan 515.123.4569
    103 Alexander Hunold 590.423.4567
    104 Bruce Ernst 590.423.4568
    SQL> select dbms_xmlgen.getxml('select employee_id, first_name,
    2 last_name, phone_number from employees where rownum < 6') xml
    3 from dual;
    *<?xml version="1.0"?>*
    *<ROWSET>*
    *<ROW>*
    *<EMPLOYEE_ID>100</EMPLOYEE_ID>*
    *<FIRST_NAME>Steven</FIRST_NAME>*
    *<LAST_NAME>King</LAST_NAME>*
    *<PHONE_NUMBER>515.123.4567</PHONE_NUMBER>*
    *</ROW>*
    *<ROW>*
    *<EMPLOYEE_ID>101</EMPLOYEE_ID>*
    *<FIRST_NAME>Neena</FIRST_NAME>*
    *<LAST_NAME>Kochhar</LAST_NAME>*
    *<PHONE_NUMBER>515.123.4568</PHONE_NUMBER>*
    *</ROW>*
    *<ROW>*
    *<EMPLOYEE_ID>102</EMPLOYEE_ID>*
    *<FIRST_NAME>Lex</FIRST_NAME>*
    *<LAST_NAME>De Haan</LAST_NAME>*
    *<PHONE_NUMBER>515.123.4569</PHONE_NUMBER>*
    *</ROW>*
    *<ROW>*
    *<EMPLOYEE_ID>103</EMPLOYEE_ID>*
    *<FIRST_NAME>Alexander</FIRST_NAME>*
    *<LAST_NAME>Hunold</LAST_NAME>*
    *<PHONE_NUMBER>590.423.4567</PHONE_NUMBER>*
    *</ROW>*
    *<ROW>*
    *<EMPLOYEE_ID>104</EMPLOYEE_ID>*
    *<FIRST_NAME>Bruce</FIRST_NAME>*
    *<LAST_NAME>Ernst</LAST_NAME>*
    *<PHONE_NUMBER>590.423.4568</PHONE_NUMBER>*
    *</ROW>*
    *</ROWSET>*
    ask if you want more assistance.
    thanks.

  • How to write and read data in a specific memory location ??

    Hi Everyone:
    Does anyone know how to write and read data in a specific memory location by using Java ?
    I need pointers, but I don't know how to do it ??
    Thanks for answering
    Rodger

    Hi Everyone:
    Does anyone know how to write and read data in a
    specific memory location by using Java ?
    I need pointers, but I don't know how to do it ??
    Thanks for answering
    RodgerWith Java you cannot write to a specific memory location. Java does not have pointers. If you really want to do it, you need to use JNI, i.e write the required functions in C (or other languages that support pointers) and make those functions available to Java (through JNI). This approach is not portable. You can have a look at http://java.sun.com/docs/books/tutorial/native1.1/index.html
    Regards.

  • How can I log the data transmission of my switch in a file to analyze the quality of my communication channel?

    How can I log the data transmission of my switch in a file to analyze the quality of my communication channels?

    A lot depends on what type of switch you have and what kind of communication channels you're asking about.
    There are several Cisco tools (e.g., "ip sla", SNMP-queried values, show commands etc.) that can give useful information.
    If you give us some more information we can help more specifically.

  • Publishing data from a Cube to a flat file

    Hi,
    I need to publish data from a Info Cube to a flat file. The requirement here is a variable selection will be specified (fiscal periods, product group) and based on the selection chosen the data should be generated in the flat file. What are the options I have to do this.
    I know using an APD we can generare data into a flat file but how can we have a variable selection for that data generation. Plus is there a limit on the number of data records we can generate
    using an APD
    Apart from the APD what other options do we have?
    Thanks
    Rashmi.

    Hi Rashmi,
    Please follow below steps by using open hub destination
    1. Go to RSA1 -> Select Open Hub Destination from Left pane.
    2. Right Click on the info area under which you want to create Open Hub and Select Create Open Hub Destination.
    3. Give Name, Description for the Open Hub.
    4. In template, Select Object type as "Infocube" and give the name in Name field. Press Enter
    5. In Destination tab, Select Destination type as File. Give all other details like Filename, Directory etc.
               In the Destination tab select type as FILE and give SEPARATOR as comma(,) and not as semi-colon(
                 and observe that the values iin the file will be displayed in different cells
    6. In Field Def tab, you will see all the Fields that can be transferred from Source infocube to File.
    7. Save the open hub destination.
    8. Right click on created open hub, Select Create transformation. Give Source of transformation as the infocube. Make transformation as needed.
    9. Again right click on the open hub, Select Create DTP. Then Save and Activate the DTP.
    10. Schedule the data extract as required.
    Option2:
    You can download in LISTCUBE tcode as well.
    Hope this helps.
    Regards,
    Reddy

  • What is the best way to export the data out of BW into a flat file on the S

    Hi All,
    We are BW 7.01 (EHP 1, Service Pack Level 7).
    As part of our BW project scope for our current release, we will be developing certain reports in BW, and for certain reports, the existing legacy reporting system based out of MS Access and the old version of Business Objects Release 2 would be used, with the needed data supplied from the BW system.
    What is the best way to export the data out of BW into a flat file on the Server on regular intervals using a process chain?
    Thanks in advance,
    - Shashi

    Hello Shashi,
    some comments:
    1) An "open hub license" is required for all processes that extract data from BW to a non-SAP system (including APD). Please check with your SAP Account Executive for details.
    2) The limitation of 16 key fields is only valid when using open hub for extracting to a DB table. There's no such limitation when writing files.
    3) Open hub is the recommended solution since it's the easiest to implement, no programming is required, and you don't have to worry much about scaling with higher data volumes (APD and CRM BAPI are quite different in all of these aspects).
    For completeness, here's the most recent documentation which also lists other options:
    http://help.sap.com/saphelp_nw73/helpdata/en/0a/0212b4335542a5ae2ecf9a51fbfc96/frameset.htm
    Regards,
    Marc
    SAP Customer Solution Adoption (CSA)

  • How to  write  internal table data vertically . Records vertically.

    Hi pals,
          How to write internal table records vertically .
    suppose the records are
    a1 a2 a3
    b1 b2 b3
    we need to display
    a1  b1
    a2  b2
    a3  b3
    Thanks in advance.
    balaji.T

    Just check the code
    DATA: BEGIN OF itab OCCURS 0,
            f1 TYPE i,
            f2 TYPE i,
            f3 TYPE i,
          END OF itab.
    DATA pos TYPE i.
    "Define your lines where you want to print here...
    DATA line1 TYPE i VALUE 10.
    DATA line2 TYPE i VALUE 12.
    DATA line3 TYPE i VALUE 14.
    itab-f1 = '1'.
    itab-f2 = '10'.
    itab-f3 = '100'.
    APPEND itab.
    itab-f1 = '2'.
    itab-f2 = '20'.
    itab-f3 = '200'.
    APPEND itab.
    itab-f1 = '3'.
    itab-f2 = '30'.
    itab-f3 = '300'.
    APPEND itab.
    itab-f1 = '4'.
    itab-f2 = '40'.
    itab-f3 = '400'.
    APPEND itab.
    loop at itab.
    write : / itab-f1,itab-f2,itab-f3.
    endloop.
    LOOP AT itab.
      pos = pos + 10.
      SKIP TO LINE line1.
      POSITION pos.
      WRITE itab-f1.
      SKIP TO LINE line2.
      POSITION pos.
      WRITE itab-f2.
      SKIP TO LINE line3.
      POSITION pos.
      WRITE itab-f3.
    ENDLOOP.

  • How to write non-XML data to a file using an OSB FTP Routing?

    Hi --
    Situation ... I need to write non-XML data to a file using FTP. A proxy service retrieves XML and transforms it with XSLT to CSV format, then gives it to a Biz service to file it out, using FTP. Simple.
    Problem ... OSB sends the contents of $body to any service it calls. Because $body is a SOAP document, it has to contain XML. So therefore I have to put my CSV data into an XML element, in order to put it into $body; and this inner element then gets written to the file, which I don’t want. But if I don't enclose my CSV content in a tag, I get "Unexpected CDATA encountered" trying to assign it to a variable.
    There has to be away around this!
    Thanks for your help.
    John Taylor

    Solved. Steps:
    -- Transform the XML to CSV using an XSL transform. Put the CSV data inside enclosing XML elements, and use a Replace action to put the XML element + CSV contents back into *$body*.
    -- Define an MFL transform that only knows about the enclosing XML elements. Use a delimiter of "\n" (hard return).
    -- Route from the proxy service to a Biz service that has Service Type = Messaging Service and Request Message Type = MFL; specify the MFL transform, which will receive the incoming *$body* variable, strip off the enclosing XML element within it, and pass the CSV contents to the FTP service.
    Edited by: DunedainRanger on Nov 29, 2011 9:03 AM

  • How to Write Waveform graph data to Text File with user option to do so

    So, I'm new to labview and am having trouble writing one program in particular.  I have a waveform graph that runs for 120 seconds generating a sine curve.  I am, however, having a difficult time getting the program to write the x and y coordinates into a text file.  I have attached what I have so far.  
    The first task I was assigned was to write a program that creates a snusoidal curve on the front pannel adding one data point each half second for 120 seconds.  The plot should only start when the user presses a start button.
    The next part involves giving the user an option to write the generated data to a spreadsheet file called "sine.txt".  The file name and location should be hardcoded.  The file should contain the x and y coordinates of each data point in columns separated by tabs, also known as delimited.
    I have spent several hours tweaking the attached program and I just can't seem to get it to work right.  Any suggestions would help at this point.
    Sincerely,
    A frustrated chemistry student whose research mentor is out of town
    Solved!
    Go to Solution.
    Attachments:
    Sinusoidal Curve (saving to excel).vi ‏45 KB

    First, you are not creating Excel files.  You are creating text files.  And it seems that your Write to file is already creating X (time) vs. Y (data curve) that is tab delimited.
    Everything else you are doing is just too complicated or a Rube Goldberg.
    All you need is the attached.
    Attachments:
    Sinusoidal_Curve_(saving_to_Text_file).vi ‏69 KB

  • Using Labview how can one store different data in different sheets of same excel file, I mean how to select different sheets to store data??

    Hello Everyone,
    I want to store various data but in different sheets of excel file. So how to select Different sheets of same excel file???
    Thanks so much 
    Pallavi 

    aeastet wrote:
    Why do you not want to use Active X?
    One very good reason that I can think of is that MS keeps changing their ActiveX interface with each version of Excel, so code written for one version of Excel using ActiveX may not work for another version of Excel, even though the basic functionality hasn't changed. A perfect example is when MS changed the "Value" property to "Value2". Yeah, that made a whole lot of sense.
    pals wrote:
    I dont want to use active X as i am not
    getting results... by using write to spreadsheet in am getting results
    but on just one sheet... I want different data on different sheets of
    same excel file. So....
    Can anyone help me in this...
    Then it's something you're doing. Please post your code. Have you tried a search on this forum for ActiveX and Excel? There have been tons of posts on it, including lots of examples. There's also the Excel thread.

  • How to print the image data stored in object of 'java.io.File' Class in jsp

    I have created a file object for the image file in the system temporary directory.Now I want to display it in my page. please tell,How to print the image data stored in object(in my program it is imgr) of 'java.io.File' Class in jsp

    Create a servlet which gets an InputStream of the file and writes it to the OutputStream of the response and call this servlet in `src` attribute. That's basically all.
    Here's an example which covers the most of the minimum needs: [http://balusc.blogspot.com/2007/04/imageservlet.html].

  • How to get purchasing data from SAP R/3 to Flat files

    Hi,
    Please can anyone help me to get the data from Purchasing extractors (2LIS_02_ITM, 2LIS_02_SCL, 2LIS_02_S012) to flat files? Here we dont want to load data from R/3 to BW for reporting, wanted to load data from flat files to OWB (Oracle warehouse builder) for reporting.  So Is there anyway to generate data into flat files from Purchasing extractors (Full and deltas)?
    Thanks,
    Pavan.

    Hello,
    here is a short report which converts S012 entries to strings with separator semicolon. Perhaps this will help you?
    Regards
    Walter Habich
    REPORT habitest2 LINE-SIZE 255.
    TYPES:
      strtab_t TYPE TABLE OF string.
    CONSTANTS:
      separator VALUE ';'.
    DATA:
      it_s012 LIKE s012 OCCURS 0,
      wa_s012 LIKE s012,
      strtab TYPE strtab_t,
      strele TYPE string.
    SELECT * FROM s012 INTO TABLE it_s012 UP TO 100 ROWS.
    PERFORM data_to_string
      TABLES
        strtab
      USING
        'S012'. "requires it_s012 and wa_s012
    LOOP AT strtab INTO strele.
      WRITE: / strele.
    ENDLOOP.
    *&      Form  data_to_string
    FORM data_to_string TABLES strtab TYPE strtab_t
                        USING  ittab TYPE any.
      DATA:
        h_zaehler TYPE i,
        line_str TYPE string,
        l_tabellenname(10) TYPE c,
        l_arbeitsbereichsname(10) TYPE c,
        h_string TYPE string,
        h_char(255) TYPE c.
      FIELD-SYMBOLS: <l_tabelle> TYPE ANY TABLE,
                     <l_arbeits> TYPE ANY,
                     <feldzeiger> TYPE ANY.
      CLEAR strtab.
      CONCATENATE 'IT_' ittab INTO l_tabellenname.
      ASSIGN (l_tabellenname) TO <l_tabelle>.
      CONCATENATE 'WA_' ittab INTO l_arbeitsbereichsname.
      ASSIGN (l_arbeitsbereichsname) TO <l_arbeits>.
      LOOP AT <l_tabelle> INTO <l_arbeits>.
        CLEAR: h_zaehler, line_str.
        line_str = ittab.
        DO.
          ADD 1 TO h_zaehler.
          ASSIGN COMPONENT h_zaehler OF
            STRUCTURE <l_arbeits> TO <feldzeiger>.
          IF sy-subrc <> 0. EXIT. ENDIF.
          WRITE <feldzeiger> TO h_char LEFT-JUSTIFIED.          "#EC *
          h_string = h_char.
          CONCATENATE line_str separator h_string INTO line_str.
        ENDDO.
        APPEND line_str TO strtab.
      ENDLOOP.
    ENDFORM.                    "data_to_string

  • How to extract required data from a column to a flat file

    my ssis package is working OK. However, I want to refine one of the column extraction.
    when data is extracted to the flat file, I just want to the initials, firstname, lastname e.g.
    FZ = Ben Smith, Add1, add1, etc
    the only bit that i want is  Ben Smith
    how can i state in the package to just give me the name and exclude the rest
    sukai

    Add a derived column task to extract Name part alone and give expression as below
    LEFT([ColumnName],FINDSTRING([ColumnName],",",1)-1)
    If before SSIS 2012 use SUBSTRING
    SUBSTRING([ColumnName],1,FINDSTRING([ColumnName],",",1)-1)
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • SSIS 2012 - Double quote charcter in data does not allow to load flat file to source component

    Hello everyone,
    I've created a source component for flat file data.
    This file contains data the column data in double quotes. Like,
    First Name Last Name
    "Ankit"       "Shah"
    The text qualifier is double quote for source file connection. 
    When I do have data like below, it does not able to load the source file. And throws an error "The column delimiter for column was not found"
    First Name Last Name
    "Ank"it"       "Shah"
    Can anybody please advise how to resolve this problem?
    Any help would be much appreciated.
    Thanks,
    Ankit
    Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com

    Please refer:
    http://visakhm.blogspot.com/2014/06/ssis-tips-handling-embedded-text.html
    http://www.ideaexcursion.com/2008/11/12/handling-embedded-text-qualifiers/
    Cheers,
    Vaibhav Chaudhari
    [MCTS],
    [MCP]

  • Extract work order data from r/3 system in flat file(csv)and export to BI

    Hi,
    I am new in interface.
    I need to extract data regarding actual cost and quantities of work assigned to Service Providers from SAP system and send it to BI for reporting purposes.
    This interface will extract Master data as well as transactional data. Extraction of Master data will be a full extract and that of transactional data will be Delta Extraction.
    Custom development will extract the data from different fields and will export it to flat files (CSV format). This program will amalgamate all the flat files created into one big file and export it to BI system.
    Export of data to BI system will be done by schedule program Control M, which will export the data from SAP system to BI system in batches. Control M is expected to run daily at night.
    Please provide the step-by-step proces to do this.
    Thanks
    Suchi
    Moderator message: anything else? please work yourself first on your requirement.
    Edited by: Thomas Zloch on Mar 25, 2011 1:21 PM

    Hi Ravi,
    you've got to set up the message type MDMRECEIPT for the Idoc distribution from R/3 to XI. Check chapter 5.2 in the IT configuration guide available on <a href="http://service.sap.com/installmdm">MDM Documentation Center</a>. It describes the necessary steps.
    BR Michael

Maybe you are looking for