How to write to Excel values from following measurements to neighbour cells?

Hi,
I build app for some measurements, "end" of this app:
As you see I have few arrays (with 12 rows). I want to eksport 2 arrays to Excel. In upper case results looks like this:
And everything is OK, this I want, but... When I run app next time I want to save this next results in columns C and D in the same file. Next app run - columns E and F, etc. How can I do this?
Regarsds

Express VIs (such as Write to Measurement Files) are basically "shortcuts" designed to provide a quick fix, but rarely allow much flexibility, such as allowing you to determine where to put your data on subsequent writes.
What you are trying to do can be done with the Report Generation Toolkit, which includes components that directly link to Excel (I'm not sure if Write to Measurement File actually uses Excel or simply writes data in an Excel-compatible format).
However, there's a minor complication. The task you have stated is to write columns, with subsequent columns going to the right of existing columns. There's a function in the Excel-specific sub-Palette to find the last row, which you can use to write rows, with subsequent rows going below the last row. It's not too difficult to use the functions in the Report Generation Toolkit to basically do what you want, but it isn't exactly straight-forward. It would be a lot easier if you could write your data in rows ...
BS

Similar Messages

How to check if all values from a dataset has come to an internal table

How to check if all values from a dataset has come to an internal table ?

Hi,
After OPEN DATASET statement check if sy-subrc = 0 if its success then proceed with split statement and save the dataset values into a internal table and while debugging the internal table you will find that whether all values get into internal table.
Checking sy-subrc after OPEN DATASET statement is must to fill up the values in the internal table.
For e.g.
OPEN DATASET p_inpfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
    WRITE :/ 'No such input file' .
    EXIT.
ELSE.
READ DATASET p_inpfile INTO loc_string.
      IF sy-subrc NE 0.
        EXIT.
      ELSE.
        CLEAR loc2.
*Spliting fields in the file-
        REPLACE ALL OCCURRENCES OF '#' IN wa_string WITH ' '.
       SPLIT wa_string AT const INTO loc2-pernr
                                       loc2-werks
                                       loc2-persk
                                       loc2-vdsk1.
Hope you get some idea.
Thanks,
Sakthi C

How to get all the values from the dropdown menu

How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtest

The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up.

How do I pass input values from a html page to a jsf page

hi,
In my project,for front view we have used html pages.how can I get input values from that html page into my jsf page.for back end purpose we have used EJB3.0
how can I write jsf managed bean for accessing these entities.we have used session facade design pattern and the IDE is netbeans5.5.
pls,help me,very urgent
thanx in advance

Simplest way is to rewrite html page into jsf page.
You can use session bean in your managed bean like this:
import javax.naming.Context;
import javax.naming.InitialContext;
public class ManagedBean {
private Context ctx;
private Object res;
// session bean interface
private Service service;
          public ManagedBean() {
            try{
                 ctx = new InitialContext();
                 res = ctx.lookup("Service");
                 service = (Service) res;
           catch(Exeption e){
}Message was edited by:
m00dy

How to change a date value from "java.util.Date" to "java.sql.Date"?

Hi all,
How to change a date value from "java.util.Date" to "java.sql.Date"?
I m still confusing what's the difference between them.....
thanks
Regards,
Kin

Thanks
but my sql statement can only accept the format (yyyy-MM-dd)
such as "select * from xx where somedate = '2004-12-31'
but when i show it to screen, i want to show it as dd-MM-yyyy
I m using the following to change the jave.util.Date to str and vice versa. But it cannot shows the dd-MM-yyyy. I tried to change the format from yyyy-MM-dd to dd-MM-yyyy, it shows the wrong date in my application.
     public String date2str(java.util.Date thisdate)     {
          if (thisdate != null)     {
               java.sql.Date thissDate = new java.sql.Date(thisdate.getTime());
               return date2str(thissDate);
          }     else     {
               return "";
     public String date2str(java.sql.Date thisdate)     {
          if (thisdate != null)     {
               SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd");
               return sdf.format(thisdate);
          }     else     {
               return "";
     public java.util.Date str2date(String thisdate)     {
          String dateFormat = "yyyy-MM-dd"; // = 1998-12-31
          java.util.Date returndate = null;
          if (thisdate != null)     {
               SimpleDateFormat dateFormatter = new SimpleDateFormat(dateFormat);
               try {
                    returndate = dateFormatter.parse(thisdate);
               } catch (ParseException pe) {
                    System.out.println (pe.getMessage());
          return returndate;
     }

How top Open a Excel Document from share point document library using jquery

How top Open a Excel Document from share point document library using jquery

Hi,
According to your post, my understanding is that you want to open excel file via JQuery.
To open excel file, we can use the following code.
<script type="text/javascript">
function openExcel(strFilePath) {
var yourSite = "http://www.yoursite.com";
openExcelDocPath(yourSite + strFilePath, false);
function openExcelDocPath(strLocation, boolReadOnly) {
var objExcel;
objExcel = new ActiveXObject("Excel.Application");
objExcel.Visible = true;
objExcel.Workbooks.Open(strLocation, false, boolReadOnly);
</script>
For more reference:
http://www.kavoir.com/2009/01/using-javascript-to-open-excel-and-word-files-in-html.html
http://www.dotnetspider.com/resources/43453-Open-Word-Excel-files-using-Javascript.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How to get updated table values from objectlistdataproviders

how to get updated table values from objectlistdataproviders

Hi,
Here is a sample code
start-of-selection.
*Select the data you need into an internal table
loop at it_mara into wa_mara.
data that needs to be displayed in the output list
    write:/ box as checkbox,
            wa_mara-matnr under text-001,
            wa_mara-maktx under text-002,
            wa_mara-lgort under text-003.
Hide the data that needs to moved to internal table
    hide:wa_mara-matnr, wa_mara-maktx, wa_mara-lgort.
endloop.
clear wa_mara.
end-of-selection.
lines = sy-linno.
at line-selection.
clear:it_matnr.
do lines times.
    check sy-index > 1.
    box = space.
    read line sy-index field value box.
    if box = 'X'.
*data selected using check box is moved to internal table
      append wa_mara to it_matnr.
    endif.
enddo.
Regards,
Jisha.

How can I get one value from local machine registry

how can I get one value from local machine registry, I would like read one value of regitry. I have windows NT workstation. I need it to find the full path of iexplore.exe, this value is in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\IEXPLORE.EXE'
Thanks.

You can use the D2KWUTIL.pll library to read/write to the registry. You have to install the forms examples to get the library.
The library d2kwut32.dll must also be installed at the clients.

How can i get all values from jtable with out selecting?

i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
thanks in advance.
raja

You could set the table's data model to be the same:
output2.setModel( output1.getModel() );

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

Hi,
Use NVL or COALESCE:
NVL (col_a, col_b)
Returns col_a if col_a is not NULL; otherwise, it returns col_b.
Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

How do I return two values from a stored procedure into an "Execute SQL Task" within SQL Server 2008 R2

Hi,
How do I return two values from a
stored procedure into an "Execute SQL Task" please? Each of these two values need to be populated into an SSIS variable for later processing, e.g. StartDate and EndDate.
Thinking about stored procedure output parameters for example. Is there anything special I need to bear in mind to ensure that the SSIS variables are populated with the updated stored procedure output parameter values?
Something like ?
CREATE PROCEDURE [etl].[ConvertPeriodToStartAndEndDate]
@intPeriod INT,
@strPeriod_Length NVARCHAR(1),
@dtStart NVARCHAR(8) OUTPUT,
@dtEnd NVARCHAR(8) OUTPUT
AS
then within the SSIS component; -
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Below execute statement should work along the parameter mapping which you have provided. Also try specifying the parameter size property as default.
Exec [etl].[ConvertPeriodToStartAndEndDate] ?,?,? output, ? output
Add a script task to check ssis variables values using,
Msgbox(Dts.Variables("User::strExtractStartDate").Value)
Do not forget to add the property "readOnlyVariables" as strExtractStartDate variable to check for only one variable.
Regards, RSingh

How we can get the values from one screen to another screen?

hi guru's.
how we can get the values from one screen to another screen?
we get values where cusor is placed but in my requirement i want to get to field values from one screen to another screen.
regards.
satheesh.

Just think of dynpros as windows into the global memory of your program... so if you want the value of a field on dynpro 1234 to appear on dynpro 2345, then just pop the value into a global variable (i.e. one defined in your top include), and you will be able to see it in your second dynpro (assuming you make the field formats etc the same on both screens!).

How do I get the values from a form?

How do I get the values from a form?

You can try using request method..
request.getParameter("yourFormInputName");
Try this.

How to get the return values from a web page

Hi all :
how to get the return values from a web page ? I mean how pass values betwen webflow and web page ?
thank you very much
Edited by: jingying Sony on Apr 15, 2010 6:15 AM
Edited by: jingying Sony on Apr 15, 2010 6:18 AM

Hi,
What kind of web page do you have? Do you have possibility to for example make RFCs? Then you could trigger events (with parameters that could "return" the values) and the workflow could react to those events. For example your task can have terminating events.
Regards,
Karri

How to Change a Default Value from Drop Down Box displayed in Web Dynpro?

Hi,
How to Change a Default Value from 'High' to 'Low' in a Drop Down Box for RANGE field displayed in Standard Web Dynpro Component. I saw a Default Value set for a RANGE field in View Context When I select that field and click on Display. I am seeing Default Value set it to 'HI'. Please let me know how to change from HIgh to Low.
I appreciate your help!
Thanks,
Monica

hi,
use the set_attribute( ) method now to set the attribute with a particular key eg HIGH in ur case
// u can use the code wizard( control +f7) this code will be auto generated when u select the
//radio button to read the context node
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
DATA ls_cn_node TYPE wd_this->element_cn_node.
* navigate from <CONTEXT> to <CN_NODE> via lead selection
lo_nd_cn_node = wd_context->get_child_node( name = wd_this->wdctx_cn_node ).
* get element via lead selection
lo_el_cn_node = lo_nd_cn_node->get_element( ).
* set single attribute
lo_el_cn_node->set_attribute(
name = `ATTribute name.`
value = 'LOW' ).
it will solve ur query ..
also refer to this component
wdr_test_events -> view dropdownbyidx and dropdownbykey ->method name onactionselect.
regards,
amit

How to write to Excel values from following measurements to neighbour cells?

Similar Messages

Maybe you are looking for