How to zerorize the reserver stock?

Hi,
At first,material A was reserved to produce material B.
However,we have discontinue to produce material B,and it show stock exist under Reserved column in mmbe.
Any advice how to zerorize the reserver stock?
Thank you.

Hi,
Go to MB22 enter the reservation no.  and then go to menu  -- Reservation   -- delete  --  and save
regards

Similar Messages

  • Which table holds the reserved stock

    Hi All,
    In report - MMBE there are two columns unrestricted stock and reserved stock. Can you kindly share how this reserved stock is calculated which table/field holds the reserved stock. If I run the MMBE report now if it is determining the reserved stock assuming it comes from RESB which holds reservations what field in RESB gives me the reserved stock and how many days or what logic does MMBE use to calculate the reserved stock.
    Thanks
    Karen

    hi KarenFarr  .. check out this tables
    Table MCHB ,  MSLB
    regards
    chinnaiya

  • How to check the sales stock of an article in SAP Retail

    Hi SAP Leaders,
    I just want w how can i check the sales stock of an article in SAP retail.
    I have to archive the sales stock of an article. IN WSE1 , it showed the article cannot b be archived as there are open sales stock. HOw can i check the sales stock of an article in SAP Retail and archive it finally.
    Regards.
    SS

    Hi sumi,
                 pls check Material Stock ALM_ME_090_CUST_USER and * ACBAPI01 EXIT_SAPLACC4_001 Accounting: ... material master (Retail) * MGV00003 ... Enhancement for article master: IDoc ... Changes in the Workflow Parameters ... 41. PROACT Stock and sales data * ... EXIT_SAPLWPUE_105 Check.
    Regards
    Sridhar

  • How to create the reservation against purchase order

    hi to all,
    as we r using alternate bom scenario in company.
    so if i create the bom of item X base qty-1 pcs
    there r 2 alternate items in bom of X are as follows
    COMPONENTS A-1 PC  priority-1 probability -100%
                         B-1 PC    priority-2 probability -0%
    now as i am creating SUBCONTRATING P.O of X for 1 pc
    than system is automatically picking the quantiy of 1 & 0 pc respectivley of A &B.
    but when i am going to create reservation against this PO .
    it is not oicking data as per PO.
    reservation ispicking data 1 & 1 of A & B. as we have added 1 pc each of A & B in bom OF X.
    Pls help how i can create the reservation against PO.
    answers will be appreciated,
    thanks
    ravi khurana

    hi,
    i f u will go to MB21 than there is option to create reservation with refrence to.
    i can create the resrevation aganst bom, there is also one option for purchase order.
    how can i use it pls suggest .
    thanks
    ravi khurana

  • How to loading the opening stock balance into Infocube 0IC_C03

    Dear Expers,
    I have referenced SDN a expert's documentation, but I canu2019t go on at page 10 .
    Check: How Tou2026 [Handle Inventory Management Scenarios in BW|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
    (1)original text:
    Loading the opening stock balance (InfoSource 2LIS_03_BX) into InfoCube
    0IC_C03. In the InfoPackage, choose the upload mode u201CCreate opening balanceu201D
    (see screenshot).
    Question:
    How to find option that upload mode u201CCreate opening balanceu201D?
    i'm  use to customize infopackage.  i  can not use default infopackage, when i click the defualt infopackage, will error prompt: Data target '0DF_C07' removed from list of loadable targets; not loadable
    (2) I actived BI Contnet (0IC_C03), I seen that the data flow  as following:
    Datasource(2LIS_03_BX)->transformation->Infosource(2LIS_03_BX_TR)-> transformation->Infocube(0IC_C03)
    Datasource(2LIS_03_BF)->transformation->Infosource(2LIS_03_ BF TR)-> transformation->Infocube(0ICC03)
    Datasource(2LIS_03_UM)->transformation->Infosource(2LIS_03_UM TR)-> transformation->Infocube(0ICC03)
    Quesiton: I donu2019t  know whatu2019s version, neither like BW 7.X nor like BW 3.X,
    Why have infosource in BW 7.X, how to use infosource load data to target?
    Currently, I canu2019t create transfer rule and upate rule for this datasource & infosource.
    Do  I  need to create a  customize ODS?
    Thank you very much , if you will answer me above two questions.
    Best Regards
    Steve

    >
    stevezhuang wrote:
    > Dear Expers,
    >
    > I have referenced SDN a expert's documentation, but I canu2019t go on at page 10 .
    >
    > Check: How Tou2026 [Handle Inventory Management Scenarios in BW|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
    >
    > (1)original text:
    > Loading the opening stock balance (InfoSource 2LIS_03_BX) into InfoCube
    > 0IC_C03. In the InfoPackage, choose the upload mode u201CCreate opening balanceu201D
    > (see screenshot).
    >
    > Question:
    > How to find option that upload mode u201CCreate opening balanceu201D?
    >  i'm  use to customize infopackage.  i  can not use default infopackage, when i click the defualt infopackage, will error prompt: Data target '0DF_C07' removed from list of loadable targets; not loadable
    >
    >
    >
    > (2) I actived BI Contnet (0IC_C03), I seen that the data flow  as following:
    > Datasource(2LIS_03_BX)->transformation->Infosource(2LIS_03_BX_TR)-> transformation->Infocube(0IC_C03)
    >
    > Datasource(2LIS_03_BF)->transformation->Infosource(2LIS_03_ BF TR)-> transformation->Infocube(0ICC03)
    >
    > Datasource(2LIS_03_UM)->transformation->Infosource(2LIS_03_UM TR)-> transformation->Infocube(0ICC03)
    >
    > Quesiton: I donu2019t  know whatu2019s version, neither like BW 7.X nor like BW 3.X,
    > Why have infosource in BW 7.X, how to use infosource load data to target?
    > Currently, I canu2019t create transfer rule and upate rule for this datasource & infosource.
    > Do  I  need to create a  customize ODS?
    >
    >
    > Thank you very much , if you will answer me above two questions.
    >
    >
    > Best Regards
    > Steve
    You don't need to worry about 0DF_C07 as it was defence cube not activated during your Business Content Activaiton.
    YOu can create your own infopackage for 2LIS_03_BX and there will be option generate intial status.
    This loading will create your Opening Balance.
    you need to compress this with NO Marker UPDATE option unchecked(as you will have to update hte marker).
    After this load movements 2LIS_03_BF and reval 2LIS_03_UM. Compress this with NO MARKER UPDATE option checked.
    Regards,
    RK

  • How to fetch the current stock of material based on Plant?

    Hi Experts,
    Could any one tell how do i need to get the current stock data of the material based on Plant.
    Thanks in advance.
    Regards,
    Abdur Rafique

    Hi ,
    MBEW stores the value of particular stock . T-code to find stock MMBE compare both wiht table and tcode.
    please let me know if you still find any issues .
    Thanks and regards,
    Rajeshwar

  • How to change the reserved quanities?

    Hi,
        I have to change the valuation class for the materials in a particular plant. But some matetials have unrestricted as well as reserved quanitities. For the materials which have Unrestricted quantity, I have done transfer posting in MB1B with mov type 309. and so I have changed the valuation class in MM02.
        But I got stuck for the materials having reserved quanitity. Please suggest what to do.
    Regards,
    Rosh

    HI,
    If reservation created against a material code, system allows you to change valuation class. As per your query you have moved the existing stock to change valuation class but you have not seen reservation. Sure changes will just effect / update in materials taken in reservation too. but it will not create any discrepancy.
    See just go through your business process if you want its creating any discrepancy you have option to change / delete reservation by mb22 / MBVR.

  • How to remove the open stock

    Dearl all,
    I have created PO with QTy 50000 KL and GR has been done for 3000 KL now in MMBE open stock parcular material is showing 2000 KL now i dont want to receive 2000 KL qty, i tried to delete the line item in PO its showing error Msg qty2000 smaller than qty delivered 3000 and i blocked the line item but showing in the open stock (inMMBE) gow to remove it
    please advice me
    points will be rewarded
    Regards
    venu gopal

    Hi
    If you donot want to receive the Further 2000 KL, In the PO item, change the PO order qty to 3000 KL & flag the delivery completed indicator in the PO item
    Thanks & Regards
    Kishore

  • How to know the excess stock with in a sales order and line item

    Hi,
          i am running an MRP against a sales order and sales order line item. the materials are getting planned based on the requirement. but due to some reasons the production orders are confirmed with out consumption of the actual required quantity of the  components. so the stock  is kept  ideal in the sales order  though it is not required further.
       do to some othere reasons also the excess stock of componenets exist. the PR or POs may also exist for the materials though they are not required further.
    i am in need of a report for the excess stock or excess PR or Purchase order for a sales order.
      please give me logic to find the excess things in that sales order and sales order line item. the Expensional message 26 is there in stock requirement list . but it does not give the excess quantity existing.
    regards
    madan

    hi rajesh,
      thanks for your reply. please tell me the logic to see when only partial quantity of sale sorder are delivered  and also when no delivery is made also.
    but manufactured and placed in stock.
    please tell me the tables to follow and logic of going ahead with them.
    regards
    madan

  • How to keep the reserve workitem in the inbox

    Hi,
    i am working with Two level PO approval process.
    approver as an four option 1.to display the report 2. edit 3. release 4. reject .
    whoever the approver chooses the option 1 &2 ( to display the report ) the report should be displayed ( custom report) to the approver and it should keep the workitem back to the inbox.
    i debugged the SAP standard functionality for Cancel and keep the wokitem in the inbox.but i didn't get how to use the same in my program.
    my workflow should behave as same as cancel and keep workitem in the inbox whenever approver chooses to display the report.
    please can any one help in achieving this functionality.
    advance thanks .
    regards
    pave.e.e.

    At <a href="http://help.sap.com">http://help.sap.com</a> you will find documentation for exit_cancelled. Just go to <a href="http://www.google.com">http://www.google.com</a> (or if you are using <a href="http://www.mozilla.org/firefox">Firefox</a> simply use the search function in the top right corner) and enter the following as search criteria:
    site:help.sap.com exit_cancelled
    You will find the documentation of the macro easily.
    It is not easy for anyone here to say whats wrong with a custom report that doesn't display. There are always several possible reasons, but you (or another good ABAP-programmer) should be able to locate the problem by debugging.

  • How to remove the negative stocks in transaction code MB51

    hi experts,
    i have this problem, when i display this material 12345 in MB51 there is a movement type 601 created in it. now when we are processing a customized program the report that was displayed does not match with the actual stocks because of this negative qty. the material document was created 3 years ago.. please help what is the procedure that i will do in order to correct the report and remove the -value in MB51.
    thank you very muhc in advance.

    Dear Ysabella Bautista
    Can you please let me know whether MB51 shows the correct quantity when compared to physical stock ??  Why I am asking is that you had indicated that in customized programme, the report was showing wrongly which may be due to some wrong coding problem.
    Also on your comments "remove the -value in MB51", please note that since this TCode is a standard one, 100% guarantee that the system shows ONLY correct value.  This is my opinion !!!!!!
    thanks
    G. Lakshmipathi

  • How to check the SC stock Assembly wise

    Hi All,
    We have a requirement,
    actually we want to see the SC stock at the vendor end, we are able to see the stock by MBLB t-code, but in this we can only see the raw materials with any reference to SFG.
    and in ME2O t-code we have to put the assemble one by one.
    but i want to see the materials for each SFG seperately.
    Please help.
    Thanks in advance
    Pankaj Garg

    hi
    so u have to develope the Z report using ref of ME2o
    or what u can do is make a txt file from ur data bse for all asmlies
    now goto ME2o
    click on yelow arrow now here u will find a button of import from text file (next to  mul sel button)
    from here u can upload this file
    regards
    KI

  • How to upload the batch stock to bin level

    Dear gurus
    My client are going to implement WM  i want to know how to upload existing batch stock to bin  level.
    regards
    sam
    Edited by: Csaba Szommer on May 25, 2011 12:10 PM

    Hi,
    You can use LSMW for Tcode LT01 to upload inital stock in WH.
    So here u can enter all relevant data required like material, qty, batch, plant, Sloc etc..
    Hope this helps you...
    Rgds,
    Kris.

  • How to get the item stock for a date

    Hi all
    I need to get the item stock quantity on a date, but i don´t know if i can get it from a table or if i have to make a query to calculate it from the documents´lines. If you can help me please reply this post.
    Thanks

    Do you already know of table OINM (Warehouse table) - it is not documented in SAP-BO references?
    This table contains entries for each movement in stocks of your system. Here are some examples of fields in this table:
    BASE_REF document number of document affecting OITW.OnHand
    DocDate      date of this document
    ItemCode     Item of which the stock quantity is changed
    Dscription    name of item
    Warehouse  affected stock
    InQty       number of items added into stock (OITW.OnHand is increased)
    OutQty       number of items taken from stock (OITW.OnHand is decreased)     
    TransType   type of booking (see below)
    Balance      this is NOT the OITW.OnHand at the date of this booking;
                      it's something like the cumulated stock value in some currency
    To calculate the OnHand-value at a date of any of these bookings you have to
    sum up the incoming/outgoing quantities, e.g. (z.B. SUM(InQty) - SUM(OutQty)).
    Relation between the type of booking and the values in InQty / OutQty:
      ++ InQty/OutQty contain the number of items added to/taken from the stock;
      the number complies to the value OITW.OnHand is increased/decreased;      
      -- doesn't affect stock (InQty/OutQty = 0)
      ? missing documentation
    TransType InQty OutQty
    -2              ++     --         opening balance
    13      --       --         outgoing invoice
    13              --      ++          outgoing invoice without previous delivery note
    15              --      ++        delivery note
    18              --       --         incoming invoice
    20             ++      --         incoming delivery note
    58             ?        ?          inventory
    59             ++      --         stock receipt (without purchasing transactions)
    60              --      ++        goods issue (without sales transactions)
    67              --      ++        transfer between stocks
    67             ++      --         transfer between stocks
    I hope that I got your question right and that my hints will help you!
    Frank

  • RE: How to compute the balance stock

    Hi,
    user perform a consignment fill-up order a month ago.
    When User perform a consignment pick-up with reference to the said consignment fill-up, the program is smart enough to detect the balance qty to be copy over to the pickup document.
    My query is
    Is there a FM that return the balance qty of that fill-up document?
    This is unlike PO whereby you can get the balance stock in a single retreival from the PO history.
    Thanks in advance

    no reply

Maybe you are looking for