How transfer the source code to customer JDI system

HI Exprts,
we have typical requirement of transferring the source code from our JDi system to Customer JDI system.
We have created one track,in that we have 30-40 DCS.now we want to continue the further development at customer place.for that we want to all the source code to Customer JDI system.
will it be possibel.
any help will appriciated
With Regards
Shobhan

Hi Shobhan,
if your developed SCs are configured as "Sources" or "Sources and Archives" then an assembly (and approval) should include a blob from DTR that contains the sources. Importing those SCAs into a track where the same SC is defined as developed SC will also import the sources into DTR.
(Those sources do not include the full history, only the active version at the time the assembly was done.)
Regards,
Marc

Similar Messages

Where is View Source? How can the source code of a website be viewed?

Where is View Source? How can the source code of a website be viewed?
View Source used to be accessed via a drop-down menu, but no longer. Why?
I'm using Firefox 24.0.

1.)Get into Firefox.
2.)open any page that you want to see the source code.
3.)After complete opening of the page do"right click"then you can see view page source,click it to see Source of the page.
Thank you.

Can you share the source code for Customer ToughDay stress test tool?

Hello,
I would like to try Customer ToughDay tool (http://dev.day.com/docs/en/cq/current/testing/tough-day.html) for load testing of our author instances of CQ5. While I am able to execute the application, the logging with log4j seems to be configured incorrectly.
Can you share the source code for toughday-5.5.jar? I think it can be a very good starting point for those of us who are new to CQ5 and need to load test it.
Thank you!

Hi,
I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
What has prompted this question?
Regards
Ray Farmer
Regards
Ray Farmer

How are the source code in the functions? Blank?

In my SAP the source code of the some functions are blank.
Is this correct?
Can you view in your Systems and put the result, please?
Functions:
LSO_COL_GET_ROOM_PRIVACYTYPES
LSO_COL_GET_ROOMS
So, when i will to test, the functions return System Failure
Thanks for Help.

Hi,
In our system in blank too.
This is a RFC it means that others systens connect into this FM and it means that the implementation must be in the FM not in the other system.
The note 1316954 - Integration: Collaboration for SAP NetWeaver 7.01 talks about the FM LSO_COL_GET_ROOMS.
Best regards,
Caíque Escaler

Where is the source code of custom UI page is written.

hi experts,
I am currently working on CRM 6.0
we have the standard UI page in SAP ,on which we have added our enhancements.Now I need to know where is the html code for the standard page is written,since I need to add a meta tag in that code.I know that the UI is divided in frames.When I rightclick on view souce in the IE I can see a java script code,but not sure from where its originating....
please let me know in which component the code is written or if there is some other location.
Edited by: Anu_87 on Jul 6, 2010 7:56 PM
Edited by: Anu_87 on Jul 6, 2010 7:57 PM

Hi,
If you are aware of BSP_WD_CMPWB transaction then you may be able to notice the 'View Layout' section towards the bottom of the 'View Structure' tab. In the section if you double click on the htm page it will take you to the htm page layout. The htm page has the same name as the view.
Regards
Prasenjit

Where is the source code of custom UI page written

hi experts,
I am currently working on CRM 6.0
we have the standard UI page in SAP ,on which we have added our enhancements.Now I need to know where is the html code for the standard page is written,since I need to add a meta tag in that code.I know that the UI is divided in frames.When I rightclick on view souce in the IE I can see a java script code,but not sure from where its originating....
please let me know in which component the code is written or if there is some other location.
Edited by: Anu_87 on Jul 6, 2010 7:54 PM

hello,
Please try by rigght click and properties...you will get an applaictaion and page name...
Thanks.

How to syntax check the source code of custom methos of classes?

Hi,
Experts,
I want to check the syntax errors is present or not in methods of classes, to check that is there any function module or classes for that?
Thank U,
Shabeer Ahmed.

T.CODE :- SLIN
USING THIS T.CODE CHECK SYNTAX ERROR AND ALL
LIKE
SYNTAX
PERFOMR/FORM
FUNCTION
AUTHORIZATION
CHECK LOAD TABLE
SET/GET PARAMETER IDs
MESSAGE
etc....

How to compile the source code?

Hello,
I have got the source code and want to custom my nosql db.
how can I compile the source code?
thank you!

You will have to apply some workarounds to achieve your goal, but they are not too bad.
One problem is that the sources for the Admin Console web application are missing from the distribution. You can build a kvstore.jar that lacks the web application but is functional in every other way. If you need to have the web application in your build, we can discuss that separately.
You will need to download the hadoop core jar file from http://repo1.maven.org/maven2/org/apache/hadoop/hadoop-core/0.20.2/hadoop-core-0.20.2.jar .
Place it in the lib directory of the distribution.
I've appended to this message a context-style diff to show the changes that are needed in build.xml. You can apply these changes by hand, or use a diff-applying program such as "patch". The diff is small -- only three lines are changed.
With these changes in place, issue the command "ant jar", which should produce the file dist/lib/kvstore.jar. This jar file has dependencies such that it will not work correctly unless it resides in the same directory as the other jars in the distribution. Therefore you should move dist/lib/kvstore.jar to lib/kvstore.jar before you try to run with it.
This is certainly harder than it needs to be. We'll consider making this easier to do in a future release.
Let me know how it goes!
*** build.xml.~1~     2011-12-14 15:11:06.000000000 -0500
--- build.xml     2012-04-19 09:44:19.649000428 -0400
*** 282,292 ****
    
    <target name="compile" depends="compile-src,
!                       compile-webapp,
                      compile-examples,
                      compile-test"/>
!   <target name="compile-src" depends="dep-dirs, update-external-libraries">
      <javac
         srcdir="${srcdir}"
         destdir="${destdir}"
--- 282,292 ----
    
    <target name="compile" depends="compile-src,
                      compile-examples,
                      compile-test"/>
!   <target name="compile-src" depends="dep-dirs">
      <javac
         srcdir="${srcdir}"
         destdir="${destdir}"
*** 402,408 ****
      </java>
    </target>
!   <target name="jar" depends="compile-src, compile-webapp-gwtc, je-version, kvclientjar">
      <delete failonerror="false" file="${jarfile}" />
      <jar jarfile="${jarfile}">
     <fileset refid="jarclasses"/>
--- 402,408 ----
      </java>
    </target>
!   <target name="jar" depends="compile-src, je-version, kvclientjar">
      <delete failonerror="false" file="${jarfile}" />
      <jar jarfile="${jarfile}">
     <fileset refid="jarclasses"/>Edited by: Guy Hillyer, Oracle on Apr 19, 2012 9:57 AM

I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Is it necessary to add? If so, how do I add H Tags to iweb.

I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Are they necessary to add? Why would one add these tags and how do I add H Tags to iweb? And are there examples to look at? I am slowly learning about simple web design and assumed that iweb was stand alone without having to write code. Is this one of the reasons iweb is no longer supported? Thanks for looking at this!

A simple text page like this:
Heading
    sub heading
          text paragraph ....
Is traditionally represented by html tags like:
<h1>Heading</h1>
     <h2>sub heading</h2>
          <p>text paragraph ... </p>
I would guess that the use of h1-h6 tags helps search engines to understand the structure of a page as the tags imply a certain structure.
This can be compared to more generic tags like <div> that could represent any kind of content - and may be what iWeb uses (you'll have to check yourself).
I would generally recommend that you use some kind of up to date blog/site building tool, perhaps Wordpress or Squarespace (I haven't used either one myself) that support current web technologies - this should reduce your SEO issues and make it easier to properly support mobile/tablet users.

How can i get the source code from java concurrent program in R12

Hi 2 all,
How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
Regards,
Zulqarnain

user570667 wrote:
Hi 2 all,
How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
Regards,
ZulqarnainDid you see old threads for similar topic/discussion? -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Java+AND+Concurrent+AND+Source+AND+Code&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How to get the source code in PAR file

Hi All,
I used the PAR migration tool to migrate from PAR to EAR file. When I imported the EAR into NWDS 7.3, I was just able to see the structure and jsp files and could not find the java source code files. I would requires the java source code to make modifications so that deprecated APIs can be replaced and to also make the code compatible with JDK 1.6.
I think the original 7.0 PAR file itself does not contain the source code. I decided to use the "Include source code" option when exporting the 7.0 PAR.
I have the portal application DC project in my NWDS 7.0. However, when I try to export the PAR file using Export --> PAR File -- > Next... I am unable to select any project from the list. The list appears blank with disabled Next & Finish buttons.
I also noticed that in the portal DC application structure, there is a .sda file under /gen/default/deploy. Also there is no PAR folder under /gen/default/public.
How do I include the source in the PAR file so that I can edit the same after migrating to EAR format ?
Regards,
Melwyn

DC and PAR/EAR stuff are different formats, SC/DC is an archive type used by NWDI, if I got it right.
How do I go about generating the PAR file (with source) ?
In fact through including the seources while creating the PAR/EAR in NWDS, but: no need to do that, you can also depack SDA (rename it to zip). If you wanna just see the Java sources you will find them there, otherwise decompile as Vijay already sad.
cheers

Is there any differnce between the Numeric Limit Test source code from TestStand 3.0 to TestStand 3.1? How to get the source code for the Numric Limit Test for both the versions?

I need to know the differnece between the Numeric Limit Test between the TestStand version 3.0 to 3.1. If there is any differnec in the source code how to find it out? If somebody has the code can you share it?
Thanks,
Jeyan

Hi,
I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
What has prompted this question?
Regards
Ray Farmer
Regards
Ray Farmer

How to get the source code of "com.sap.caf.eu.gp.example.tiimeoff.wd.creat

Hi Frendz..
I want to know how we can build a callable obj which have a two buttons those r Accept n Reject accordiing to the actions on these buttons flow should forward to next screen(approver ) r sent back to the sender(screen with reject).
I gone thru the Leave process(Time-Off process) which is very suitable for my requirment but in this app there r using predefined CO(com.sap.caf.eu.gp.example.tiimeoff.wd.create).How we see the source code of this predefined CO.
Thanks in Advance
Regards
Rajesh

Hi,
check [this|Re: Source of Time-off Request Project].
Regards,
Naga

How to find the source code of com.sap.caf.eu.gp.example.tiimeoff.wd.create

Hi Frendz..
I want to know how we can build a callable obj which have a two buttons those r Accept n Reject accordiing to the actions on these buttons flow should forward to next screen(approver ) r sent back to the sender(screen with reject).
I gone thru the Leave process(Time-Off process) which is very suitable for my requirment but in this app there r using predefined CO(com.sap.caf.eu.gp.example.tiimeoff.wd.create).How we see the source code of this predefined CO.
Thanks in Advance
Regards
Rajesh

not answered

How to retrieve the source code navigation sidebar

Hi,
I'm trying to build a site following the tutorials on the dreamweaver software. I get in the part where i have to do the columns but i lost the navigation sidebar where the source code tab and the check_cs5.css are under the index.html tab, and have to use this one to be able to continue with the setup. I would like to know if it possible to retrieve this side bar and how? Or what to do to fix it, especially i'm far away for this step, do I have to start over? Please, I need an ASAP answer.
Thanks,

I get in the part where i have to do the columns but i lost the
navigation sidebar where the source code tab and the check_cs5.css are
under the index.html tab, and have to use this one to be able to
continue with the setup. I would like to know if it possible to
retrieve this side bar and how?
I'm assuming you're doing this tutorial by David Powers:
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt2.html
DW Menu > Window > Files or CSS Styles.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How transfer the source code to customer JDI system

Similar Messages

Maybe you are looking for