How Work tx SARA

Hi Gurus
Somebody can explain me  how work tx SARA ??
I am working with object 'FI_DOCUMNT' and i have created  a variant, in this variant I have defined some attributes such as selection variable and the name, in those fields I am not using  the standar SAP.
I found a program Z for define posible values in all fields in the variant, this program is used for put some information in the table TVARVC but i dont understand how can i determine which fields i am going put a possible value??
I do not understand which is the relation between tx SARA , Variable selection and the program Z for put some information in the variant of ejecution , somebody have worked with this it
Thanks
Gregory

ready

Similar Messages

  • How to extract .SAR files

    Hi All
    Can anybody tell me how to extract .SAR files. Is it possible through sapcar.exe, if so how.
    Thanks in advance

    Hi,
    reading the note, I found that it refers to the notes 480180 and 13719 for more information about applying the patch. I can not tell you wether you have to apply this patch or not...
    The patch seems to contain a changed SAP Script form due to some legal changes in India - if you need the changes to this form, you'll have to apply it.
    Basically - this is what note 13719 says - copy the cofile to /usr/sap/trans/cofiles, the data file to /usr/sap/trans/data, go to STMS, add P6BK252127 to the import queue (open the import queue of your system, go to Extras -> Other Requests -> Add) of your system and import it. Note 13719 says to import from the operating system level by calling tp directly, using STMS should also work.
    Best regards,
      Elmar.

  • How to extract *.sar and *.car

    hi all .,
               can u help me out in this ..
    how to uncar *.sar and *.car

    Hello Raja,
    you can find the SAPCAR file on this location
    /usr/sap/SID/SYS/exe/run
    you can extract the .sar or .car files through SAPCAR
    sapcar -xvf <filename>
    Regards
    Subhash

  • How work Tone Measuremen​ts instrument​?

    Hi.
    Could you say me how works Tone Measurement tool in LabView 8.5.1?  I need this information for my diploma thesis. It use FFT or Fourier transformation?
    Thank you! 
    Solved!
    Go to Solution.

    Although the Express vi help is vague (Its meant for beginners so it discusses functions at high level) If you convert the express vi to  a sub-vi you can open its heirarchy (see picture above)
    Exploring the heirarchy with Help on yields answers and more detailed explainations of the underlying functions.  A FFT is used to compute the tone information.
    Jeff

  • How work a buffer?

    Hi,
    I work on a buffer. I want to acquire an .avi in an buffer of ten seconds. For example, all images acquired by the camera come in a buffer
    9[1][X][X][X][X][X][X][X][X][X] -> [2][1][X][X][X][X][X][X][X][X]  etc...  [1][2][3][4][5][6][7][8][9][10] and after [11][1][2][3][4][5][6][7][8][9]    and when I push on capture it copy only the ten last seconds. I think that is a ring buffer.I do two .vi but I don't understand how works the buffers.           
    Attachments:
    Essaione.vi ‏22 KB
    Buffer.vi ‏52 KB

    wow .. too many questions in one post
    you need to learn BASIC ABAP to be precise..
    1. Internal table are like array of structure...(hope u can relate it to other coding language now) and workarea is just one structure.. so a work area is used to hold single line of a internal table of same format..
    2. text - integer.. integer to text... => YES.. just define a variable as type STRING. and do what ever operation you want on this.
    3. use ROUND for rounding off..
    4. Please NO MORE TOO MANY QUESTION on ONE thread... Thanks
    -Somu.

  • How work this Blend Mode Mathematically ?

    hi,
    i need to know how work this Blend Mode :
    Layer, Overlay, Hard light, Add, Subtract, Difference,
    Invert, Alpha & Erase . Mathematically ?
    Regards
    Crimson

    AlMostabed wrote:
    > this like help u :
    >
    http://dunnbypaul.net/blends
    >
    > one more question mid-grey in RGB is (128 , 128 , 128 ).
    how i know
    > if the base color less or greater than mid-grey ??
    >
    > i know DARKER than mid grey will be less than 128 &
    LIGHTER than mid
    > grey will be higher than 128 but in each channels or
    what ?
    >
    > ok, ( 129 , 239 , 129 ) is lighter than mid grey and (
    127 , 101 ,
    > 123 ) is darker than med grey . right ? and ( 235 , 128
    , 107 ) is
    > darker or lighter then mid gray ??
    You need the L component of the HSL representation of your
    colour.
    http://en.wikipedia.org/wiki/HSL_color_space
    L=0.5*(Math.min(Math.min(r, g), b)+Math.max(Math.max(r, g),
    b))
    where r, g, and b are the components of the colour.
    Andrew

  • How work the decompiler flash?

    i wnat to know how work the decompiler flash..
    thank nissan.

    Hello & welcome Iotu!
    http://www.tech-recipes.com/rx/4836/os-x-how-to-burn-a-multisession-cd-or-dvd/
    http://myrightbrain.wordpress.com/2006/08/12/how-to-do-multisession-burns-with-m ac-os-x/

  • How work forum here?

    Hi, I want ask how work forum here. When I will ask for anything, who answer me? And what is "Duke Dollars". Must I have any duke dollars for any answer???

    Hi, I want ask how work forum here. When I will ask
    for anything, who answer me? anyone who is around at that time, and feels he/she has something to say regarding your question.
    However, before starting to fire awy questions, it is adviseable to search the forum first to see if your question hasn't been answered on a previous thread!
    And what is "Duke
    Dollars". Must I have any duke dollars for any
    answer??? Duke Dollars are said to encourage people to answer your questions. I am not sure whether assigning Duke Dollars to your post has any effect at all, but if you assign Duke Dollars to your question, make sure you award them... (if your question is answered:-))

  • How working days is  treated and counted as leave day.

    Q. What is working Days & How working days is  treated and counted as leave day.
    Case 1-suppose Absence is registered on 15.11.2010- 18.112010.but on 17.11.2010 is a public holiday.in as IT2001 it is showing as Absence hrs =24 days,Abs days = 3 days and Cal days = 4 days .Quota used= 4.
    why it is not showing 32 hrs .
    Thanks

    The counting rule for absences takes care if the public holiday or non working days as to be counted when absence is entered or not.
    If you tick on (not  a public holiday) then only days which are not public holidays wll be counted in absence counting. If you dont check saturday sunday in the rule then sat sunday will be counted towards leave...Other options are also there for eg. Holiday classes. You can make appropriate settings  and include or exclude the working/non working days from absence counting.

  • How works final cut studio with lion?

    how works final cut studio with lion?

    The thing to take from FCPX is that it isn't an update/upgrade from 7. It's an entirely new editor. As a professional video editor myself for 5 years, I felt just as hesitant as you when I first saw what Apple had done. However, I committed myself to biting the bullet for a little while to get comfortable with the new workflow, and I can vouch for Apple's new move toward this type of setup. It has improved my workflow enough to where I can confidently say I deliver projects, on average, in half the time, with no sacrifice to quality.
    Give it another chance, if you can afford it. With a bit of training, and time into using it, you'll see it's a superior editor to FCP 7

  • FCS and image sequences (TGA...) : how works the proxy creation?

    Hello,
    I would like to know how work FCS with image sequences (TGA, TIFF sequences...) for proxy creation.
    For example, the image sequences are created by 3D workstation at the speed of one frame per second.
    Does FCS create a proxy each time the folder is checked? The old proxy is delated?
    Thank you for your answer

    Jim is right. You can't replace a clip with an image sequence.
    If you are rendering your comps from one system, follow Jim's sage advice.
    But, in the cases when I do a multi-system network 3d render, there is
    no way for all systems to write to the same Uncompressed AVI file...
    so rendering to an image sequence is the only option.
    You say:
    ...for speed reasons -  converting them to lower res quicktime files
    and using those to edit in Premiere Pro.
    You might consider converting your sequences to both a low-res proxy for editing,
    and also convert to full-res lossless codec AVI files at the same time for swapping out later.

  • How works Group System de-provisioning ?

    Hi all,
    I'm runing SAP IDM 7.1 SP4 last patch.
    Here is my pain :
    When a user has 2 privileges from the same ABAP repository (for example: SAP_ALL and SAP_NEW), and when those privileges are removed from the identity assignments manually (using a web interface Add / Remove privilege), the DeprovisionABAP task is launch.
    Priv are not going through PendingValues, so DeprovisionABAP task is launch from repository deprovision task definition.
    And because those privileges were the last ones, 2 Delete ABAP user task are launch as well.
    The first on finish OK, but the second one failed because the user as already been delete by the 1st task.
    When I look into the RemoveFlagRunChildren, it looks like when priv are manually removed ("#" into MXP_AUDIT table) from an entrytype "MX_PERSON" nothing is done.
    Can you please let me know how works Group system de-provision because I have a error each time that all privileges from the same repository are removed from a MX_PERSON.
    Thanks for your help,
    Benjamin

    Try the BExApplication object, .ComConnection.Language property. BTW, there are a lot of useful things there. At least it works when I logon to BEx via Connect button. For example:
    Public BExApp As Object
    Sub BExAppTest()
        Set BExApp = CreateObject("com.sap.bi.et.analyzer.api.BExApplication")
        MsgBox BExApp.ComConnection.Language
        Set BExApp = Nothing
    End Sub
    P.S. BExApplication object is a part of BExApi.tlb library (if you need a reference, however it seems to work even without a ref).

  • How works Get Property Value / Type Automatic?

    Hi,
    I need to get in Labview some variables from Teststand. The VI I wrote use "Get Property Value" from Teststand and works fine... when I specify the type of variable I whant from Teststand (Boolean, I32,...).
    But I need a VI which retrieve the value of my variable independently of the variable type.
    I tried to set the type option "Automatic" but the "Get Property Value" always give back an empty array of boolean....
    How works the "Automatic" option by the "Get Property Value"?
    Is there a possibility in Labview to get the type of a Teststand variable?
    Cheers,
    Risotto

    Risotto,
    the "automatic" feature is no feature but an entry made because of the
    polymorphic design of the "get property value" VI. if you would change
    the order of the VIs contained in the polymorphic VI, you would
    retrieve other kind of values.
    therefore never use the automatic setting of this VI. the
    simplest way to solve such thing is to pass the data in variant and an
    additional numeric value for identifying the type of the value.
    Norbert B.
    - NI Germany
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • How work all field in reader created with acrobat

    All fields are created with acrobat.Some fields such as attachment button (app.execMenuItem("AddFileAttachment");) are not work in reader though I have used "reader extended PDF" contained in acrobat. How can I able to use those fields in reader? Please help me.
    Would you tell me What is reader extended right? How can I use it? What kind of software is needed?

    Thanks for response and helpful answer.
    Would you tell me what sould I do to install Turnkey at first? From Where I can download JBoss?
    In addition, I have already installed LC design with Acrobat X pro

  • How to extract SAR file ?

    hi,
    i have downloaded SP15 for NW DEVELOPER STUDIO 7.00 , the file name is JIDE15_0-10003480.SAR
    the patch is for the Developer Studio which is installed in my laptop.
    i put the SAR files same directory with sapcar.exe, then at the dos prompt i run
    c> sapcar -xvf JIDE15_0-10003480.SAR
    and it prompted me error message "format error in header".
    what would be the right way of extracting SAR file in my laptop (windows xp)  ?
    comment and advice are appreciated.
    thanks.
    regards,
    kent

    Hello Kent,
    The command for extracting the sar file is right which you have mentioned.One more thing i want to add up to this message chain.Format header error could happen for couple of reasons.
    1.Check for the correct patch you have downloaded, i mean it should be for the correct OS version and DB
    2.You are using a SAPCAR of a different OS to unpack the patch of a different OS.
    3.Download the patch again and try.
    4.If none of the above is working then probably check with a patch which is on a lower level than the one you are trying to uncar.
    Hope this would be of some help to you.
    Thanks and Regards,
    -Bijesh.

Maybe you are looking for