How would I do nightly, automated builds using cvs, svn and XCode

Here's what I'm trying to do.
We have source code repositories. Some are svn, the rest are cvs.
What I'd like to do is, each night, do cvs/svn updates, and then open those projects in XCode, and build the projects. Secondarily, I'd like to have build errors written to a file (or e-mailed, or something).
The build-error part isn't as important. But knowing that new changes have been submitted to cvs / svn, so we'd only build when something changed, would be useful.
I am not an Automator expert, but it seems like this might serve that purpose. If there is another way to do that, I'd be happy to find out.
Thanks for any help you could provide.
-Dan.

Change to the project directory and run xcodebuild to build the project. It should be fairly easy to create a shell script that does the updates from revision control and build.

Similar Messages

  • How to create PDF with Form Builder (T-Code:SPF) and how to use it?

    How to create PDF with Form Builder (T-Code:SPF) and how to use it? Is there anyone can show me some doc. or PA material ? << removed >>  Thank you very much!!
    Edited by: Rob Burbank on Nov 11, 2010 1:04 PM

    PDF forms also known as Adobe From or Interactive Forms.
    Check this link -
    Interactive Forms
    REG:ADOBE FORM
    Adobe forms
    Regards,
    Amit

  • How would 2 people call each other using facetime if both were in a foreign country but staying at different locations within that country?

    How would 2 people call each other using facetime if both were in a foreign country but staying at different locations within that country?

    It's tied to the Apple ID also - I believe it would use that to find the right person/device.
    Perhaps this article would help: http://support.apple.com/kb/HT4319. It looks like you may want to go in through your contacts and make the call.
    If you're concerned about data charges, put your phone in Airplane mode before trying to Facetime. That will prevent it from trying to make a call over your cellular data.
    ~Lyssa

  • I need to play a song on a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through the whole presentation ? Thanks.

    I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
    Thanks.

    Drag the file into the audio window in the Document inspector...

  • How to upload a file into server using j2ee jsp and servlet with bean?

    How to upload a file into server using j2ee jsp and servlet with bean? Please give me the reference or url about how to do that. If related to struts is more suitable.
    Anyone help me please!

    u don't need j2ee and struts to do file uploading. An example is as such
    in JSP. u use the <input> file tag like
    <input type="file"....>You need a bean to capture the file contents like
    class FileUploadObj {
        private FormFile srcFile;
        private byte[] fileContent;
        // all the getter and setter methods
    }Then in the servlet, you process the file for uploading
        * The following loads the uploaded binary data into a byte Array.
        FileUploadObj form = new FileUploadObj();
        byte[] byteArr = null;
        if (form.signFile != null) {
            int filesize = form.srcFile.getFileSize();
            byteArr = new byte[filesize];
            ByteArrayInputStream bytein = new ByteArrayInputStream (form.srcFile.getFileData());
            bytein.read(byteArr);
            bytein.close();
            form.setFileContent(byteArr);
        // Write file content using Writer class into the destination file in the server.
        ...

  • HT204350 Incorrect link to "OS X: How to migrate data from another Mac using Mountain Lion and earlier"

    Incorrect link to "OS X: How to migrate data from another Mac using Mountain Lion and earlier". Should be http://support.apple.com/kb/HT6025

    I think the OP is saying OS X: How to migrate data from another Mac using Mountain Lion and earlier (which should be a link to HT4889) just links back to OS X: How to migrate data from another Mac using Mavericks (HT5872).
    It does indeed do that, & HT4889 seems to be MIA.

  • HT2470 how would i go about taking multiple files from documents and make them part of 1 master file

    how would i go about taking multiple files from documents and make them into 1 master file? I want to put all documents associated with this project together for easier access.

    From the finder window, click File, click new folder, you can drag all documents into that Folder making it the master folder. You can ajso drag folders into the Master folder, and have them as sub-folders if you wish to  do that. Either way they will all be in one master folder.

  • Last night i have used my ipod and in morning i found it dead please help me its not responding at all i have tried evry thing

    last night i have used my ipod and in morning i found it dead please help me its not responding at all i have tried evry thing

    Charge the battery.
    If necessary, restore the iPod >  iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

  • HT1338 Yesterday, I purchased Mountain Lion OSX and tried to download it but I don't think it worked.  How can I tell if I am using Mountain Lion and how do I get help if the download was unsuccessful?

    Yesterday, I purchased Mountain Lion OSX and tried to download it but I don't think the download worked.  How can I tell if I am using Mountain Lion and how do I get help if the download was unsuccessful?

    Click your Apple menu icon top left corner of your screen.
    From the drop down menu click About This Mac.
    If Mountain Lion is installed, it will say:  v10.8
    If not, launch the App Store. From the App Store menu bar click Store > Check for Unfinished Downloads
    FYI ..  for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
    If you need to reinstall OS X or repair the the startup disk Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation.

  • When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    Does Firefox switch to full screen if you press F11 ?
    You can also try the F10 key to see if that brings up the menu bar.
    * If the above steps didn't help then see http://kb.mozillazine.org/Corrupt_localstore.rdf
    Note: Do not delete localstore.rdf in the program folder (Windows: "C:\Program Files\Mozilla Firefox\defaults\profile\") (Mac: "/Applications/Firefox.app/defaults/profile/")

  • How would you determine the total ram used by applets?

    hi guys;
    I have 2 applets.
    One applet runs in a browswer. - in the microsoft jvm.
    Another applet on another browser (or another page) - in the sun plugin.
    How would you guys determine the total RAM (not just heap memory) used by these applets.
    my strategy would be to open up the browser. and look at the memory next to that internet explorer process. Then I would open up another browser with applet and see total memory taken. Then I would subtract to determine the difference.
    Does this sound correct?
    Each applet has multiple jar files associated with it.
    Stev

    What you really should do is test your applet on a bunch of machines, like a 32 meg ram win 98, 64 meg ram win NT, and a 256 meg ram win 2000, and then give them a performance report under the different configurations. That's really what they're after (probably)

  • VI Analyzer - How Would You Configure It for This Use Case?

    My group has different people working on different LVPROJs for each software deliverable we have. Each LVPROJ uses our user.libs and instr.libs, as well as an overall "framework" that is the same for most LVPROJs.
    I really think the VI Analyzer toolkit would be powerful for code reviews, but only if I can configure it in a way where which tests I run and what the criteria are can be saved and used on any project. I can't seem to get this to work for me. I want to save all those configurations, and use it on new LVPROJs easily - the easier I can make this process, the more inclined others will be to use this for code review. How would you do it? (if it's even feasible)
    Solved!
    Go to Solution.

    I suggest creating a .cfg file without a project linkage, but with all the tests selected and configured as you want...so a .cfg file with no "Items to Analyze" specified. Then, when working on an individual project, open that CFG file, add the project's top-level folder to the analysis, then save that CFG file with that project. This means you can't have the project linkage in your CFG file, but assuming your project is all within some top-level folder, that shouldn't be much of an issue, since the CFG file will be "linked" at that point to the top-level folder containing your project.
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • How to communicate with a 9401 module using 9151 expansion and 7813r PXI card

    Hi,
    I have just started working with my 7813 R-series card.  I was able to create a simple VI in which I could send and receive digital signals.  Now I would like to do something similar using my 9151 expansion chassis and 9401 C-series module.  If possible I would like to do all of this using windows (no RT for now).  Right now I am right-clicking on "my computer" in the project tree and adding new devices to find the 7813.  From there I have a rough idea of how to build a simple VI using the NI example.  However, I do not know where to look for the expansion chassis or the C-series module.  If any one could give me some advice or point to an example, that would be great.  I have seen the examples in Example Finder for the 9401, but they seem to be using a compactDAQ system as opposed to the PXI setup. 
    Thanks for the help!
    Solved!
    Go to Solution.

    Hello ACE_Lab,
    The steps you should take in order to configure your setup in the LabVIEW project window is as follows:
    Step 1...
    Step 2...This step should auto-populate with the existing PXI-7813R if it is connected. If you want to setup the target without the card connected, the you can just add a new target as follows.
    Step 3...This is the point at which you will be adding the NI-9151 expansion chassis:
    Step 4...
    Step 5...
    Step 6...If you have the module connected to the chassis, you should be able to see the module in the list:
    Step 7...If the module is not connected, you can just select "New Target or Device" from the menu in step 6 and add a new target as follows:
    An example from the Example Finder called "Digital Line Input.vi" should be a good place to start. Below is a screenshot of roughly where you need to start:
    Regards.
    Jeff L.
    Applications Engineer | National Instruments

  • How to identify the SQLs which are using the tables and new columns

    Hi
    I m using oracle 10G Database in windows. Developers have added some columns in some of the database tables and were asking to check whether there is some impact on performance or not. I have not done this performance tuning before. Kindly help me how to proceed further.
    How to obtain the sqls which are touching the tables and the new columns? It would be really great if you can help me with this.
    Thanks

    You can try to use DBA_DEPENDENCIES to get PL/SQL objects using tables: http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/statviews_1041.htm#i1576452.
    However if SQL code is not stored in database in a trigger, a procedure, a function, a package or a view, it is impossible to retrieve all SQL code referencing some table from database dictionary: for this you would have to analyze application source code.

  • Iphone 5 very slow, how do I remove music? Im using the icloud and itunes match.

    The phone locks up and restarts on its own now. Hard to navigate with it because its very slow.
    Already did a backup and restored it from the backup. Any ideas? Thanks

    Hi Super Scout,
    There are a few different reasons this could be happening, and it sounds like you're on the right track to isolating the issue.  However, it would be very helpful to go one step further and Use iTunes to restore your iOS device to factory settings - Apple Support. This will completely wipe everything off the phone (including the iOS software itself) and install a fresh, clean copy of iOS, just in case there is a corrupt file in there giving you the trouble.  After reinstalling iOS, set the phone up as a new iPhone temporarily to test the issue and see if it is still happening.  If so, there may be a hardware issue with the device.  Hopefully that isn't the case -- if the phone runs smoothly when set up as new then it means there was a corrupt file in the operating system or that there is something in your backup (possibly a third-party app) causing the issue.  After testing the iPhone set up as new, go ahead and restore the phone from your backup and see if the issue comes back.  If so, you may want to contact Apple Support to see if their diagnostic test helps narrow down which apps are contributing to the issue.
    Good luck!

Maybe you are looking for