How would you tell if there was damage on the inside?

I was just wondering, would there be any signs that if you dropped it, something was broken on the inside? Or is there nothing to really break on the inside?

The symptom is that it does not work right

Similar Messages

  • How can you tell if spyware was installed on an iMac?

    How can you tell is spyware was installed on an iMac?

    You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful: The User Tip seeks to offer guidance on the main security threats and how to avoid them.
    https://discussions.apple.com/docs/DOC-2435

  • I went to charge my ipod touch lastnight and it would not charge. There was nothing on the screen no life in it.

    I went to charge my ipod touch lastnight and it would not charge. There was nothing on the screen no life in it. Well today i plugged into my laptop and itunes came up saying it is in recovery mode. Im trying to restore it but nothings happening on my ipod got the apple sign on the screen and the bar going across but its emtyand theres nothing loading, itunes also says waiting for ipod. Someone please help  cant live without my ipod,

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT4914 How can you tell which songs are downloaded from the cloud on an ipad

    How can you tell which songs are downloaded on the iPad from the cloud?

    I know ipad albums are more like tagging photos rather than putting them in folders. I just have a nagging feeling I missed some pics and I have too many to try to go figure out one by one. I don't look at my photos from the camera roll, only from albums I tagged just because I imported photos from different sources and the dates and order is really messed up. I just want to know that I am viewing all the photos from like this vacation or that event and there's none I missed that are only in the camera roll.

  • How do you tell if your a victim of the recent java hack and what to do

    so watching the news, how do you tell if your mac was affected, and is there anything you can do to fix it if you are in fact "hacked" thx

    Other than updating  Java, there is no perfect way to detect an attack.
    You may not have Java installed after all. You can check it.
    Finder > Application > Utilities > Java Preferences
    Click "Java Preferences".
    If a pop-up opens up offering to "Install", Mac does not have Java installed.
    Click "Not Now" button and close the Application folder.
    Safari > Preferences > Security > Web content:
    If the box next to "Enable Java" is checked, uncheck it.
    Best.

  • How do you turn off "There was a problem connecting to server..." notifications

    I work with a company that does a lot of shared review of documents via PDF on their local network. I, however, am a thousand miles away, and reviewing it via a separate DropBoxed copy.
    It appears every time I open the DropBoxed copy of the PDF, Adobe Acrobat begins searching for the original PDF on a server to which I am not connected. And then I get variations on the following notification until I do a full reboot:
    There was a problem connecting to the server "XXXXXXXX"
    The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
    That, my friends, is a gigantic posterior pustule that I want to pop. So what's a solution.
    Before you go all "look elsewhere on this forum/Google/Whatevah for an answer to this already answered question," please understand that I have. Everywhere. For the last month. And please, don't just chime in with a "I have that problem too" with no solution. I just could really use the help of the Apple Hive Mind to solve this. If this is not the right forum, please direct me to where this should be posted.
    Thanks in advance. The specs: Macbook Pro 13" (late 2013), 512GB, OS X Yosemite 10.10 (was happening with Mavericks too).

    All "shared review" PDFs. Regular PDFs from other sources do not trigger the problem. My belief is that there is a embedded script in the shared review PDFs that continually seeks to link to the relevant servers. As I stated above, I am not on that server(s) either virtually, wirelessly or hard-wired.
    Based on your previous questions (thanks, BTW), I have "sanitized" some of the PDFs that have caused this condition and am testing to see if that takes care of the situation. But seriously, isn't there some way to kill the constant "trying to connect to server" thing? It's annoying as (fill in the blank).
    Thanks for the help on this.

  • How can you tell if it is "publishing in the background"

    I am publishing a new family website using iweb 08. Admitedly it is loaded with lotts of stuff - 10 galleries, 12 movies and a few blog entries and this is the first time I have published but it does seem to be taking rather a long time (8 hours so far).
    Firstly is there any way of estimating how long it should take to publish? Secondly after I publish this main initial site I will only add bits - will each publish session last this long? Lastly is there anyway of telling whether iweb is "publishing in the background" or has somehow frozen and seeing how far it has progressed - the wheel next to my site name in the panel is on an almost invisible slither but it's been this way for two hours. In this time using the internet has been virtually impossible.
    Most grateful for any replies.

    One thing I do to see if the site is actually being updated is to open the Activity Monitor, and then the Network tab and look for the Red line (Data Sent) to be above zero. Depending on your connection speed you should have a more or less constant red line which would show that your Mac is sending data out the network port. I know I pushed a couple hundred MB of dta once and it took hours, but I could see that it was still sending, so I just had to tough it out.
    As for estimating... there is the amount of data in Bytes, (or kilobytes or megabytes) divided by your upload speed, +/- any variances in that speed over time. That could give you a *ballpark time* to expect things to take.
    An example might be a 4 MB file, sent with my upload speed (as measured by the Activity Monitor) of 64KB (Kilobytes, not Kilobits) of data transfer per second. Therefore my file is 4000 /64, or 62.5 seconds. In actual fact there was a brief drop in a test I just did where there was no data being sent so my send actually took about 75 seconds, but you get the idea.
    Hope that helps.

  • How would you use these Apple devices to create the best network?

    I have the following devices and want to create the best network for my 3 story home:
    Time Capsule 3GB, latest generation (needs to be located on middle floor in a corner room by the Comcast modem)
    Time Capsule late 2009
    Airport Express 2010
    More data, the devices that connect to this network:
    New MacBook pro (in same room with new Time Capsule)
    New iMac (in same room with Time Capsule)
    2009 iMac (on second floor)
    Iphone 5 and 5s
    ipad Minis
    ipad Airs
    Apple TV second generation
    I've done some testing and the signal is pretty good on the second floor (meaning that the download speeds on the second floor iMac are the same as those in the same room with the new Time Capsule).  But the upstairs bedrooms have speeds cut by 50%.
    There is no reasonable way to connect the new Time Capsule by ethernet to any other devices.
    Would it be helpful to extend the wireless network "wirelessly" with the old Time Capsule in an area upstairs with strong signal?  Would the old TC then "re-pump" the signal into the bedrooms which don't have line of sight with the new TC?
    How would I best do this?
    Thanks for any help you can offer.

    Time Capsule 3GB, latest generation (needs to be located on middle floor in a corner room by the Comcast modem)
    Time Capsule late 2009
    Airport Express 2010
    So, the old Time Capsule and AirPort Express are near the new Time Capsule and connected to it with an Ethernet cable.....or are the old Time Capsule and Express not even in use at all?
    Would it be helpful to extend the wireless network "wirelessly" with the old Time Capsule in an area upstairs with strong signal?
    While it would be better if you could connect the old Time Capsule to the new Time Capsule using a wired Ethernet connection, the old Time Capsule might help things out a bit in the bedroom area if it is located where it can receive a strong wireless signal from the new Time Capsule.
    This is one of those situations where performance cannot be predicted and you simply have to try it out in your home to see how well it will work. It could not hurt to use the old TC to extend the signal wirelessly to the bedroom area, if you want to give that a try.
    You did not mention the AirPort Express, but it could possibly be located downstairs if you need more wireless signal coverage in a given area. The trick again, is to find a location where the Express can both receive a strong wireless signal and also provide additional wireless coverage.
    Setting up the old Time Capsule or Express will only take a few minutes if you want to give things a try. Post back if you need more details on "how" to do this.

  • How can you tell if an iPod touch has the new apps?

    Having seen the updates to the ipod Touch I'm finally ready to buy one. From the keynote I gather that new units shipping from the factory after 15 Jan have the new software, old units do not and, unusually for apple, even if you buy an old software unit after the announcement, you don't get the software for free. Worse still, I'm in one of those countries they sell the touch, but don't have an iTunes store, so if I buy an old one, I'm stuck with it, cannot upgrade.
    Is there any way to tell from the box which version you have, change in part number, anything? I'm sure they aren't doing the M$ sticker approach "now with 1.1.3 and lots of new apps". The return policy out here in Singapore is basically you can't, so I need to figure out in the store if the box I'm buying is new, or old, and I have no clue at all how much stock is left out there.
    Any suggestions?

    Hello, 
    If you're going to buy in a real shop then why not have the retailer open the box for you. Especially if they don't do returns - that's a must.
    The next suggestion is a little more hit-and-miss but the fourth and fifth digits of the Serial Number are the week of production. If you get a week 02 or later it should be okay. Perhaps someone with a brand new one could confirm.
    mrtotes

  • HT4718 How do you uninstall programs that was downloaded on the internet

    Hello everyone,
    I have a MacBook Pro 13 13 inch 2012 mid and I learned how to use a Mac now but I just don't know if you can uninstall programs that was downloaded on the internet. If you do know how to uninstall programs please comment and let me know

    You may find these articles helpful.
    http://support.apple.com/kb/PH14299
    http://www.thexlab.com/faqs/uninstallingapps.html

  • How can you tell if there is a malisious IP address on your computer?

    This question was solved.
    View Solution.

    If you know the address check here:
    http://www.threatstop.com/checkip
    Also see free online tools
    http://zeltser.com/combating-malicious-software/lookup-malicious-websites.html
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • How do you tell which computer you origionally sync the ipod touch with?

    I went to do the 2.0 update for ipod touch but it says make sure you have the ipod connected with the computer you sync with. I sync with both my mac and laptop but I think they mean the origional one you started with. How do you tell which one?

    Make it the one. You have the power!
    What they want is to make sure you are not doing this somewhere that you may lose the ability to connect the iPod (work, friend's house, internet cafe, library) because there is a file that will be downloaded to the computer, and if you need to restore at some point, iTunes will need that file.

  • I need to change my apple id in my ipod (it was an old email address).  How would you do this?

    I need to change my apple ID in my ipod touch (it was an old email address).  I have changed to setting in itunes.  How would you do this? - not sure what my OS is.

    Go to Settings>Store (or Settings>iTunes and App Stores for iOS 6) and sign out and sign in with the other/updated account.

  • How could it happen that there was a wrong FIRMWARE on the HP side?

    Hey,
    I've bought a HP LaserJet Pro 200 color MFP M276nw.
    I checked for a new firmware
    1.
    downloaded the latest one: M270_colorMFP_Series_FW_Update-20140718.exe
    2.
    I started the exe file while working in a WiFi NETWORK
       2.1 - chose the printer
       2.2 - got a SMILE
       2.3 - checked the system info: FAILED: old FIRMWARE 20121026 
                  Printer firmware update failed, nothing happened.
    3.
    I started the exe file while working in a WiFi NETWORK
       3.1 - chose the printer 
       and after a quarter of the installation I saw an "error 65" displayed on the printer screen 
       3.2 - but still got a SMILE at the end
       3.3 - checked the system info: OLD FIRMWARE 20121026 
                  Printer firmware update FAILED, nothing happened.
    4.
    I started the next try with USB connection  
       4.1 - chose the printer 
       and after a quarter of the installation I saw "BLACK printer screen"
       4.2 - but at the end I still got a SMILE from the laptop Software
       4.3 - checked the system info: OLD FIRMWARE 20121026 
                  Printer firmware update FAILED, nothing happened.
    5. 
    Meanwhile I had searched the web for "error 65" and found a disussion 2 few weeks ago, where there was metioned that error 65 displayed on the printer screen.
    There was mentioned that the downloaded firmware was wrong and that there should have been only one firmware on the website and that the latest was wrong, "20140521" should be the only one.
    I started the next try with USB connection and that bigger "20140521"  exe file 
       5.1 - chose the printer  
       5.2 - then I saw something like "programming" what sounded somehow better
       5.3 - the display went again black while the app on the laptop was still running
       5.4 - again there was a "programming" screen displayed
       5.5 - the display went again black
       5.6 - but then the printer rebooted while the app was still running .
       5.7 - a few moments later the laptop firmware app was done and the SMILE came back
       5.8 - checked the system info: NEW FIRMWARE  
    AFTER ALL IT TOOK ME MORE THAN 4 HOURS just to update that FIRMWARE.
    I still don't know if that firmware is fixing my problem of backing up and restoring Printer Configurations.
    I don't like the fact that it seems that I am not able to save the complete configuration or at least each configuration segment like it should be possible for the "eMail Adressbook"
    There is much more work to be done inside each network configuration (Networkname, Fileprefix, Format, resolution, ...),. Therefore it would be very useful to have a backup especially if you have to exchange units .
    Why isn't this backup feature available for FAX Adresses & Network Buttons?
    HOW COULD IT HAPPEN THAT THERE WAS A WRONG FIRMWARE ON THE OFFICIAL HP SIDE?
    HOW CAN IT BE THAT EVEN THE SUCCESSFULL FIRMWARE UPDATE PROCESS WAS THE TOTAL OPPOSITE OF something you would call smooth?
    There was no message on the PC telling something about what was going on on the HP 200 printer, the programming, black displays, reboot and nothing was synchronized between the firmware app and the printer  display.
    The TCO of this unit have exploded for this tiny firmware update I had done before on other equipment over 15 years.
    I can't believe that the app is state of the art and that the quality assurance is on the right track if there is a wrong  firmware on HP's website.
    I am really unsatisfied and still hope, that the firmware update will deliver a better success than I had the whole eveing.
    WOLF

    Hey,
    so after 3 month nothing has been cleared.
    I got several phone calls from a terribly bad german speaking support center (may be polish orign) agent , therefore I could not understand her easily and she had no technical expertise or skills. I answered all her questions.
    Later I got a support eMail in german where she was speaking about an "ELIVIERUNGSTEAM"
    That is an in german unknown word probably she meant "EVALUIERUNGSTEAM" which means EVALUATION TEAM.
    So I got that answer from that TEAM in late December 2014  and replied after christmas.
    I received an eMail that HP received my answer but nothing happened until today.
    We have several devices with the same issues and I do not want to hear or read that HP tries to tell me that it is my problem. It is an problem which occured under each browser they asked me to perform the steps - chrome, firefox, ie ...
    And it occures on all printers of that series and on all laptops.
    HERE IS THE LAST MESSAGE WHICH ANNOUNCED A REPLACEMENT BUT I AM STILL WAITING 
    HERE IS THAT MESSAGE:
    Antwort unserer Elevierung [ ref:_00DG0h8qk._500G0bDLRI:ref ]
    Sehr geehrter Herr Bxxxxxxxxxxxxxx,
    anbei die Originalantwort unseres Elevierungsteams. Sollten Sie eine deutsche Übersetzung benötigen, so bitten wir um Rückmeldung:
    Thank you for the escalation. We are able to save the email as well as fax phone book and restore it. The files saved are in .csv format. As for the firmware on the website, we are looking into it on a priority basis, as a number of product firmware listed are incorrect. We expect the error to be rectified soon, I shall keep you updated. If the customer has tried updating the printer firmware and as a result of it he is having the issue, then please replace the printer for the customer and check for the issue.
    With Regards
    Ich hoffe Ihnen mit diesen Auskünften weitergeholfen zu haben.
    Mit freundlichen Grüßen,
    Ihr HP-Laserjet-Support
    WHO IS RESPONSIBLE FOR THIS SUPPORT UNIT AND THAT WHOLE TASK ?
    I NEED SOLUTIONS CAUSE HERE ARE SEVERAL MACHINES WITH ALL THESE PROBLEMS BECAUSE WE MADE THESE UPDATES OF THE HP FIRMWARE

  • How can you tell if a file is being used in your project or not?

    How can you tell if a file in your bin is being used in your project or not? My director dragged hundreds of reference files into my project and only used a few of them. I'd like to do some house cleaning and delete the ones that are not in use. This project file has 100 sequences in it, so it would be a tough manual hunt to figure this out.
    In Premiere Pro (or Flash for example), where all the information is in the Project Bin such as in/out times and duration, there is where it tells you how many times that piece of media has been used or if it hasn't been used yet.
    Can FCP tell me this info?
    Thanks for yout time!
    -Monty

    Monty,
    Within FCP, there is a menu item called "Media Manager" (depending on what version you are in). This would be worth your while to look into. It basically organizes your project by moving/archiving any used assets of a project and leaving out un-used assets. It saves a ton of disk space.
    For example, say you have a 5 minute clip with an in/out point that is just 30 seconds. Media Manager will "archive" just that 30 seconds, not the entire clip. There is even a setting that you can add additional "handles" time to the front andd back of the clip if you think you may need to add or change transition.
    Do a google search. I was just watching a few Youtube videos on this myself.
    Jonathan

Maybe you are looking for