How write a field to screen(report list) but don't display it ?

Hi, All
    How write a value to screen(report list) but don't display it ?  Because i will use this value as the user click the current line ,but i don't want to expose this value to the user.

Hi,
U can Use the option NO-DISPLAY with PARAMETERS.
Can write in the Selection screen statement with the syntax as
Paramaters: <fieldname> type <data type>
             value <value> no-display.
-Rakesh

Similar Messages

  • How to swap fields in screen painter.

    hello gurus,,
    how to swap fields in screen painter.

    Hi
    Go through the link given below :
    http://www.standardware.com/pdf/stdwsp.pdf
    With Regards
    Nikunj Shah

  • How do i clean the screen of my macbook with retina display?

    how do i clean the screen of my macbook with retina display?

    To clean the screen on your MacBook, MacBook Pro, or MacBook Air, first shut down the computer and unplug the power adapter. Dampen the included cleaning cloth with just water and wipe the screen. Do not spray liquid directly onto the screen.
    Important: The bottom case of the MacBook (13-inch, Late 2009) and MacBook (13-inch, Mid 2010) uses a soft nonslip material. Use a 3M Gray Microfiber or soft dye-free, lint-free cloth to clean the bottom case.
    http://support.apple.com/kb/ts1544

  • How can I view ipad screen on computer, when I pad display is broken but internal system works

    how can I view ipad screen on computer, when I pad display is broken but internal system works

    THIS WORKS FOR ME
    ON MAIN SCREEN GO INTO VIDEOS THEN SETTINGS ON NEXT SCREEN
    SET TV OUT TO EITHER "ASK" OR "ON"
    TV SIGNAL SET TO PAL
    FIT TO SCREEN SET TO ON
    REMAINING SETTINGS TO OFF
    CONNECT TO TV SCART OR RED,WHITE YELLOW SOCKETS WITH IPOD/TV LEAD AND AWAY YOU GO.

  • I just downloaded 3 podcast items into my iPod shuffle but don't know how to listen to it.  It plays the music list but don't know how to get to my podcast list to play it..

    I just downloaded 3 podcast items into my iPod shuffle but don't know how to listen to it.  It plays the music list but don't know how to get to my podcast list to play it..

    jfromnj wrote:
    I purchased and downloaded the Family Pack of IWork.  I recently purchased another computer (MacBook Pro) and I want to be able to use IWork on the new
    computer but don't know how to go about it.  The only thing on the Apple home page is to purchase either the item or trial pack.  I don't think I should have to purchase anything since a family pack covers 5 computers in the same household.  Please, if someone knows how to go about this and what I need to do so please let me know.  Thank you.
    You didn't keep the download for future use?

  • I know that how to convert any documents to pdf file, but don't know how to get barcode on it. I am using windows 8.1. and want to see barcode on my documents before the print. Please help.

    I know that how to convert any documents to pdf file, but don't know how to get barcode on it. I am using windows 8.1. and want to see barcode on my documents before the print. Please help.

    Hi Frank ,
    Please refer to the following link and see if this helps.
    https://helpx.adobe.com/acrobat/kb/error-organizer-database-damaged-reset-1.html
    Regards
    Sukrit Dhingra

  • How can I get a drop-down list selection also be selected in another field with the same list but a different name?

    I have a street address and a billing address. A question is posed with a checkbox — "Is the billing address the same as the street address?" If Yes is checked, the street address automatically fills the billing fields. If No is checked, the user must fill in new information. In both the street address and billing addres, the State field is a drop-down list. How can I get the drop-down list selection in the street address State also be selected in drop-down list for the billing address State?

    Has anyone done this?

  • How can anyone add to a SharePoint list but only some can edit all fields?

    My office has a list on our SharePoint for product requests. We were trying to make it so that the "+Add Item" link was available to all who want to request a map but only specific fields such as Name or Description would be editable on their
    end. Once the item is in the system, the SharePoint admins in our office could update things like Status or Analyst. However, after talking to the individual in charge of our SharePoint permissions told us that we cannot set this basic ability to "everybody"
    and instead need to create a special group with limited permissions. Unforunately we have high-turnover between our office and other locations and see this causing a problem in the near future. Is there a work around such as creating a web app or form that
    will push the necessary data into the SharePoint list or maybe just send it via email to designated recipients in our office to process it?

    I do not see any simple solutions here.  You have various options, each with different limitations and each will require some effort to implement.  Mix and match as best meets your needs:
    Create a standard list as usual*. In the lists's Advanced settings, in the Item-Level Permissions group, select the options Read all items and Create items and edit items that were created by the user.  This approach lets users create their own items
    and edit them, and they can still view other's, but they cannot edit other's.  Note: some list templates do not provide the Item-Level Permissions group of settings.
    Create a custom permissions level: copy it from Contribute.  Remove all of the Edit and Delete list permissions.  This approach lets your users create new and view existing entries, but not delete or edit them.
    Configure Incoming Email, and email-enable the target list.  You can configure the list to accept email according to the permissions that person has with respect to the list.  Thus, for example, a person with Contribute permission level would
    be able to send email to the list but a person with Read permission level would not.
    Create the list.  This will also create default New, Edit and View forms.  Customize the New form in SharePoint Designer 2013 so as not to display the fields you do not wish the user to edit.
    Create new site fields and content types: create one content type that displays only a few of these new fields and the other that displays all of them.  Add these to the list.  Configure a custom content type as the default for the list that displays
    only a few fields.  Users will see this content type when they create a new entry.  Edit the New list form to display only this content type.  Edit the View list form to display only this content type.
    References
    Configure custom permissions in SharePoint 2013
    Configure incoming email for a SharePoint 2013 farm.
    Create a custom list form using SharePoint Designer
    Create or customize a site content type

  • Object Id on the Decision Report List applet does not display the Object Id

    The Object Id field of the Decision Report List Applet displays either the entity name of the entity name - Id. We wouldlike to dispay the siebel row Id's in that field respectivey for the parent or the child or grandchild entities.Please help with h to go about it.
    If the base entity is declared as global in OPM, then global gets displayed in the Object id. If a siebel entity is declared as an entity in OPM then entityname - Id gets displayed.
    Thanks !!

    Unfortunately the decision report comes from deep with the engine and there is not much you can do to change it.
    However, the Decision report is XML which is then modified by an XSLT for display in Siebel. You could have a look at the style sheet and the original XML and see if there is a way for displaying the XML that might be more suitable for your purpose.
    The xslt is decision_report.xslt and can be found in the siebsrvr\XSLT directory.
    Cheers
    Frank

  • Can anyone tell me how to stop my iPad screen changing from vertical to horizontal display

    Can anyone help me stop my iPad mini screen jumping from vertical to horizontal display, have just downloaded ios7 and this has just started

    Sometimes the Rotation Lock can be in the Control Center.

  • Extra networks listed but don't exist

    If I go to the System Preferences/Network/Location Automatic/Show AirPort....I see By default, join "A specific network" as my only option. Then in the Network listing there are two extra networks listed but they are phantom and don't exist. In the upper right in the Show Airport status the 2 networks also appear.
    How do I get rid of the extra phantom networks listed? Stumped......

    The +/- boxes are available in the By default, join: Preferred networks but not in the Automatic mode. If I select the + button and use the pull-down for Network Name they appear again. They also appear in my Show AirPort status in menu bar. Can't seem to get rid of them......any thoughts?

  • How to disable fields in a report at runtime

    Hi All,
            i want to know is there any method to disable a particular field on the selection screen of a report program at runtime....
    For example ... if i have two select options on the screen and i want to disable the second field if anything is entered in first field ....
    can it be possible.. if yes then share then share the logic.
    Thanks & regards,
    Syed

    Hi,
    Please check the sample code below
    AT SELECTION-SCREEN.
    IF SEL_OPT1 IS NOT INITIAL.
    LOOP AT SCREEN.
    IF SCREEN-NAME = SEL_OPT2.
    SCREEN-INPUT = 0.
    MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    Hope this would help you.
    Good luck
    Narin

  • How to view fields on screen but make non-printable?

    I have a text and fillable field that I want to view on screen but not print.  I selected the presence as 'Visible (Screen Only)' but when I print the fields also print.  Any idea how I can make fields in my form both visible on screen but not printable.

    How are you printing the document? If you're printing from the design screen or doing a screenshot, all the fields will show up.

  • How can we allow over 103,718 list of values to display in webi report selection?

    I know, why would we want to?
    Our business users would like to see the list ordered and first select from a range and drill down.
    Any query in information design tool already does this as well as the preview values for the LOV object.
    Is there a way to make large LOV function this way in webi query/report?
    If not, is there a way to move beyond the warning of 'Partial list'?

    These are all dependent parameters for LOV
    At BO Server level
    Web Intelligence Processing Server-> Maximum List Of Values Size (entries) - 50000 (default)
    Web Intelligence Processing Server-> List of Values Batch Size (entries) -1000 (default)
    At Universe level
    Array Fetch parameter at database.PRM file.
    Limit size of result set to --  parameter
    Query Level
    Max rows retrieved ( Click Query Properties to display the "Query Properties" dialog box.)
    You can try below steps
    Follow these steps to change the maximum size for a list of values:
    Log in to Central Management Console.
    Click Servers.
    Right click Web Intelligence Processing Server and select Properties.
    Increase the value of Maximum List Of Values Size (entries).
    Save and restart the Web Intelligence Processing Server.  Note: Setting large number for Maximum List Of Values Size (entries) may affect the performance of Web Intelligence. It is recommended to set the appropriate number according to the system performance.

  • How to remove # fields from my report

    Hi,
    In our Bex query, fields which have no data are displayed as '#'. because of this many fields are shown '#' since no data for those fields. As this looks odd we want in our report , these fields to be shown as blank ' '  instead of '#'. Is it possible to make those fields leave empty instead of showing up #.
    I have searched all the forum questions found similar questions but could not find a convincing answer .
    Please help required
    thanks & regards
    Krishna

    Hi
    you can use a macro to do this.
    You can find the following link for the proceedure to add a macro:
    http://wiki.sdn.sap.com/wiki/display/BI/SAPBWMacros--BExFormatting+Features
    and you can add a macro like for your requirement:
    Sub DelX()
    Dim c As Range
    For Each c In ActiveSheet.UsedRange
        With c
            If Replace(LCase(.Value), "#", "") = "" Then .Value = ""
        End With
    Next c
    End Sub
    Let me know if the Macro worked for you.
    Regards,
    Krishna Tangudu

Maybe you are looking for