How you turn off mirror mode it keeps turning on and i dont have it connected

what can i do

Give this a Try an see if it Helps with your Razr: With the Issue it's Having if it Does Not Let me Know!!!
These are the Instructions on Clearing the Cache Partition:  For Razr & Razr Maxx
Top Alternate method
Power the device off.
Press the Power button then select Power off.
If the device doesn't respond to input, press and hold the Volume Up / Down then press and holdPower button. When the device screen goes blank release the Power button while continuing to holdVolume Up / Down, proceed with step 3.
Press and hold the Volume Up / Down then press the Power button.
When presented with the Boot Mode Selection Menu release all buttons.
Press Volume Down to select Recovery then press Volume Up.
From the Droid triage screen, simultaneously press Volume Up / Down.
Select Clear the Cache Partition then press the Power button.
Select reboot system now then press the Power button.

Similar Messages

  • HT204291 Why don't I see the airplay icon in my settings? I have the ios7 installed now my netflix won't work as need to turn off mirroring..... And the airplay device is not installed.... Anyone help on this?.

    Why don't I see the airplay icon in my settings? I have the ios7 installed now my netflix won't work as need to turn off mirroring..... And the airplay device is not installed.... Anyone help on this?.

    Reboot your router. The icon only shows when connected to wifi and Apple TV or similar device. Same thing happened with my phone and the icon appeared in control center after router reboot.

  • HT4285 how to deactivate my iphone if it was stolen ? and i dont have the serial number.

    how to deactivate my iphone if it was stolen ? and i dont have the serial number.

    If you have an iCloud account the you can go to www.iCloud.com and sign in with your Appleid.  Click on Find my iPhone and Find it's location, deactivate or Wipe it.
    I would also call your Mobile service provider and have them cancel the service for that unit.
    Regards,
    Captfred

  • How do I reinstall Lion when I bought it online and I dont have it

    Hi how can I reinstall Lion on my computer w/o installing first SL and then Lion.
    I just want to install Lion.
    The other problem is that I bought it online and I dont have the dmg.
    Cheers

    Boot up holding command-r keys into Lion Recovery Volume.
    The screen should give you these choices...
    Restore from TM backup
    Reinstall Mac OS X
    Get help online
    Disk Utility

  • Please please help:my iPhone 3GS 32gb on iOS 6.0.1keeps turning off unexpectedly even when charge is 100% and cannot power on unless connected to power...please help here

    Please help here...the iPhone doesn't turn on unless connected to power

    Take it in to an Apple Store if you can.  The genius bar can very quickly test if it is just the battery showing its age or not.  If it is the battery, you can get it replaced through Apple
    http://www.apple.com/batteries/replacements.html
    Depending on how it has been used though, it may not be the battery.  My old iPhone 32GB 3Gs is still good for about 6-7 hours of continuous use (as an iPod touch these days) and it was bought new in 2009 shortly after the 3Gs became available at AT&T stores.  So yours might be experiencing some hardware failure not the actual battery itself.

  • HT4813 How to I edit this file, it says its locked and I dont have permissions: default_default.conf.default.

    I need to add index.cfm to my default document tree.  I finally found where to change it in Lion Server.  When I try to edit the file, it wont let me.  Any way to edit the file?
    default_default.conf.default.

    Sorry, are you sure that you have typed the correct password for the admin (after sudo -s)?
    hostname:sites_disabled pyro$ sudo -s
    Password:
    bash-3.2# pwd
    /private/etc/apache2/sites_disabled
    bash-3.2# ls -lha
    total 0
    drwxr-xr-x   5 root  wheel   170B Jan  3 14:56 .
    drwxr-xr-x  34 root  wheel   1.1K May  2 11:57 ..
    -rw-r--r--   1 root  wheel   697B Jan  3 10:36 0000_default_default.conf
    -rw-r--r--   1 root  wheel   697B Jan  3 10:36 default_default.conf
    -r--r--r--   1 root  wheel   697B Jan  3 10:36 default_default.conf.default
    bash-3.2# chmod 644 default_default.conf.default
    bash-3.2# ls -lha
    total 0
    drwxr-xr-x   5 root  wheel   170B Jan  3 14:56 .
    drwxr-xr-x  34 root  wheel   1.1K May  2 11:57 ..
    -rw-r--r--   1 root  wheel   697B Jan  3 10:36 0000_default_default.conf
    -rw-r--r--   1 root  wheel   697B Jan  3 10:36 default_default.conf
    -rw-r--r--   1 root  wheel   697B Jan  3 10:36 default_default.conf.default
    bash-3.2# chmod 444 default_default.conf.default
    bash-3.2# ls -lha
    total 0
    drwxr-xr-x   5 root  wheel   170B Jan  3 14:56 .
    drwxr-xr-x  34 root  wheel   1.1K May  2 11:57 ..
    -rw-r--r--   1 root  wheel   697B Jan  3 10:36 0000_default_default.conf
    -rw-r--r--   1 root  wheel   697B Jan  3 10:36 default_default.conf
    -r--r--r--   1 root  wheel   697B Jan  3 10:36 default_default.conf.default

  • How can I turn off the screen while keeping the mac awake?

    I am using teamviewer to remote connect to my office Imac from home. However, every time I connected, my imac screen will turn on and everyone else in the office can see what my imac is doing..
    Is there some method to turn off the screen while keeping the mac awake, so I can remote connect to it?
    PS: I am using OSX 10.7.3

    Energy Saver, you can keep the computer awake while the screen saver shuts the monitor off but I'm not sure that would do it for you.

  • My iPad won't turn off. It won't turn on either. It keeps going from the apple to a black screen. What can I do?

    I can't get it to turn off. It just keeps going back and forth from the apple to the blank screen.

    You will probably need to restore using Recovery Mode. You use this method when the iPad is not being recognized in iTunes. This will totally erase the device, but if you restore on the computer that you normally sync with, you can restore from your backup when you are done - but only if you have a backup.
    You can read about it here.
    http://support.apple.com/kb/ht4097
    Or you can follow these Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

    Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

    Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • Getting error message that states itunesexe has been set to run in compatibilty mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it .How do i turn off compatibility mode?

    recieved error message that states" itunes exe has been set to run in compatibility mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it. How do i access compatibility mode and turn it off ? Believe i have Windows 7.

    Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself): 
    iTunes for Windows: How to turn off Compatibility Mode

  • I have windows 7 and I can't sign into ITunes.  Message says to turn off compatibility mode to use.  How and why do I need to do this?

    I have Windows 7.  I was previously using Windows 98 when I set up ITunes and developed a library of music and movies.  When I try to log in I keep getting a message stating that am using an older version of Windows and that I need to turn off "compatability mode to use ITunes.  Where and why do I need to do this?

    Hi there skinguru,
    You may find the information in the article below helpful.
    iTunes for Windows: How to turn off Compatibility Mode
    http://support.apple.com/kb/ts1489
    -Griff W. 

  • How do I turn off conversation mode in text messaging.

    How do I turn off conversation mode in text messaging. i want my messages in sequential order.
    It is a galaxy s3

        Hi Catchingup
    I can answer this question for you.You can't change the stock messaging application to turn off the conversation mode. You may be able to download a 3rd party application for messaging that could assist you with this feature.
    Thank you
    JoeL_VZW
    Please follow us on twitter @vzwsupport

  • I get a message to - (turn off compatibility mode) how?

    While attempting to sync my Iphone, I get a message to turn off compatibility mode, how do I do that?

    Hi there For Victory,
    You may find the information in the article below helpful.
    iTunes for Windows: How to turn off Compatibility Mode
    http://support.apple.com/kb/ts1489
    -Griff W. 

  • Itunes says to turn off compatibility mode? don't know how, help!!

    I just downloaded the itunes 9.2 update this week and since then have been prompted to turn off compatibility mode every time I open itunes. I don't even know what that means or how to turn it off, (never seen this message before). Does anyone know how to turn this mode off? I've searched the progam files and all the options and can't seem to find anything.

    I just downloaded the itunes 9.2 update this week and since then have been prompted to turn off compatibility mode every time I open itunes
    There's instructions on how to change compatibility mode settings for iTunes in the following document, although there's a couple of additional quirks you need to watch for.
    When you get to *step 8* make sure that no boxes are checked in the compatibility mode tab (not just the compatibility mode box itself ... having any box checked in there can cause a compatibility mode error message).
    [iTunes for Windows: How to turn off Compatibility Mode|http://support.apple.com/kb/TS1489]
    If none of the checkboxes are checked, and you're still getting a compatibility mode message, that's usually caused by an errant registry setting. For troubleshooting advice on that possibility, see Random Behavior's post in the following thread:
    http://discussions.apple.com/message.jspa?messageID=10397771#10397771

  • Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

    Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
    Thank you for all of your answer.

    I've seen it mentioned on here that a PRAM reset may solve it:
    Reset PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P and R.
    You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

Maybe you are looking for