HOWTO: Generate the sidecar file without rendering/generating video?

I'm not sure this is even possible, but can you configure AME to generate the sidecar without building the video?
For instance, I add my own metadata within the body of markers in Premiere projects as well as other metadata. I then have an application that exgracts this data into a proprietary XML schema, but this data is validated before further production. Sometimes there's an error and we need to go back and edit the source (within the Premiere project). Now, since this has zero impact on the actual video, just the sidecar, we were wondering if you can just update the sidecar.
If not, not a big deal as this is a bit edge case.

Turn off the video track eyeballs. You'll get a black video, but it'll go much quicker and you can just delete it afterwards.
I get my Encore chapter markers in this way.

Similar Messages

Can generate the TKPROF file without the SQL is not running completed ?

Dear all:
I want to generate the TKPROF file from the trace file, Can generate the TKPROF file without the SQL is not running completed ? Is it the TKPROF file can be used? because the report is too large. My environment is ORACLE 11.5.9
Regards
Terry

When you can wait for completion, then that's the easiest route.
When you can't wait, you'll have to use a different method. I suggest to watch the v$ views for what your session is doing. Views like v$session, v$session_wait, v$sess_io and the views starting with v$sql. Also worth mentioning is Tanel Poder's site, which contains some very useful scripts for diagnosing performance problems this way: http://tech.e2sn.com/.
Regards,
Rob.

How to get the update file without using Nokia Sof...

The network connection is unreliable and downloading the firmware update using PC Suite for my Nokia E90 proves difficult. Does anyone know how I can get the firmware version 300.34.84?
The trouble is Nokia's Software Updater does not accommodate any slight interruption to the connection during the update process. I will update this discussion with what version of PC Suite I have once I get that info.
Any help is kindly appreciated

In fact, it is not Possible to get the update file without using Nokia Software Updater or you should search the net to find the update files in another place and even you get them, you can not use them with NSU.
You can Update your Device with:
1 - NSU (Nokia Software Update)
2 - FOTA (Firmware Over The Air) for FP2 devices ONLY.
3 - Nokia Care Center
there is not other way to upgrade.
Hope useful for u.
regards
Nokia N79 4GB
SW Version: 32.001 RM-348 MEA

LR 2.7: Where are the sidecar files?

Hi,
after I switched from 2.6 to 2.7 I do not find the sidecar (XMP) files anymore. I have setup LR to automatically write adjustments to the sidecar file.
But this does not happen. Even if I do that manually, no sidecar files are written. (The way I work with LR and my files relies on a database independent way of storing image adustments)
Did I miss something or did Abobe change their concept?
Thomas

Assuming we're talking about proprietary raw files, etc., there's one other possibility. I've seen this before, when the xmp files were deleted outside of Lightroom, and LR didn't write new ones because as far as it was concerned, the xmp files were up to date. The solution, in that situation, is to make a change to the photos, for example adjusting a Develop setting that you don't usually use, which could easily be undone once the new xmp files are created, and then asking it to write xmp files, which would force it to do so.

After changing my graphic card to an ASUS Strix GT 970, Photoshop CS6 opens the JPG files without show them on the screen

After changing my graphic card to an ASUS Strix GT 970, Photoshop opens the JPG files without show them on the screen

Try turning off GPU support in your Photoshop's preferences performance section. Also check that you have installed the latest device driver installed for your GT 970 adapter and that all CS6 updates are installed... Your CS6 should be version 13.0.1.3....

For iPhone and Android, what is the best file format for watching videos?

For iPhone and Android, what is the best file format for watching videos?

You can try these setting. They are from CS5.5 but should work in CS4.
Make sure you check Use Max. Render Quality.

Write xmp sidecar files without need to export masters - script

I've written a script to write xmp sidecar files for referenced and online images (the 2 conditions in the script) of the selected images. I looked for a while at system events and other stuff to be able to write the xmp file, but i'm not a programmer, so in the end i chose the long and dirty way to do it.
This script will export all iptc expanded fields as aperture does (creating basically the same file). It can be easily adjusted to include other tags, even custom ones. I don't know how to get at the adjustments for images, otherwise those could be included as well.
If anyone has the energy to clean this up and make it faster, feel free to do so. Next, I'm going to try to write a script to do the opposite, import xmp sidecars for imported online and referenced files.
Here it goes (thanks to Brett Gross for the database part to find the master filename):
--script to create sidecar xmp files for referenced files without having to export masters. parts of the script (finding the file name) are by brett gross
property p_sql : "/usr/bin/sqlite3 "
global g_libPath
on run
my getLibPath()
--counter for processed images, reset, just in case
set mastercount to 0
tell application "Aperture"
if not (exists selection) then
display dialog "You have to select at least one image" buttons {"OK"} default button 1
return
else
display dialog "You have selected " & (count of selection) & " images." & return & "Continue?" default button 1
end if
set theSel to selection
--run through the selected images
repeat with currentpic from 1 to count of theSel
tell item currentpic of theSel
-- only apply to referenced and online images
if referenced and online then
set mastercount to mastercount + 1
set curID to id
--find the master file path and name - this part by brett gross, thanks
set libPOSIX to POSIX path of g_libPath
set libDBPOSIX to (libPOSIX & "/Aperture.aplib/Library.apdb") as string
set theScript to p_sql & (quoted form of libDBPOSIX) & " \"select ZFILEUUID from ZRKVERSION where ZUUID='" & curID & "'\""
set ZFILEUUID to do shell script theScript
# ---------- Get the master's path
set theScript to p_sql & (quoted form of libDBPOSIX) & " \"select ZIMAGEPATH from ZRKFILE where ZUUID='" & ZFILEUUID & "'\""
set ZIMAGEPATH to do shell script theScript
# ---------- Get the master's disk name
set theScript to p_sql & (quoted form of libDBPOSIX) & " \"select ZFILEVOLUMEUUID from ZRKFILE where ZUUID='" & ZFILEUUID & "'\""
set ZFILEVOLUMEUUID to do shell script theScript
set theScript to p_sql & (quoted form of libDBPOSIX) & " \"select ZNAME from ZRKVOLUME where ZUUID='" & ZFILEVOLUMEUUID & "'\""
set diskName to do shell script theScript
set imgPath to (diskName & "/" & ZIMAGEPATH)
--end brett gross part
--strips extension, seems to work for files and paths with more than one period
set oldlim to AppleScript's text item delimiters
set AppleScript's text item delimiters to "."
try --remove last extension only
set contador to text item -1 of imgPath
set noExtension to Unicode text 1 thru -((count of contador) + 2) of imgPath
on error --handle files with no extensions
set noExtension to imgPath
end try
set AppleScript's text item delimiters to oldlim
--create the file and path name with the .xmp extension for writing
set xmpPath to "/Volumes/" & noExtension & ".xmp" as Unicode text
--convert posix path to alias for easier write and read handling
set xmpPath to POSIX file xmpPath as file specification
-- header for xmp file
set xmpheader to ("<?xpacket begin='' id=''?>
<x:xmpmeta xmlns:x='adobe:ns:meta/' x:xmptk='XMP toolkit 2.9-9, framework 1.6'>
<rdf:RDF xmlns:rdf='http://www.w3.org/1999/02/22-rdf-syntax-ns#' xmlns:iX='http://ns.adobe.com/iX/1.0/'>") & return
-- footer for xmp file
set xmpfooter to ("</rdf:RDF>
</x:xmpmeta>
<?xpacket end='w'?>") & return
--xmp content, part 1
--check for existence of iptc tags, create content or empty string depending on existance of tags
if (exists IPTC tag "Contact") or (exists IPTC tag "Country/PrimaryLocationCode") then
set xmpcontentpartone to ("<rdf:Description rdf:about='' xmlns:Iptc4xmpCore='http://iptc.org/std/Iptc4xmpCore/1.0/xmlns/'>") & return
try
set CountryCode to value of IPTC tag "Country/PrimaryLocationCode"
set xmpcontentpartone to xmpcontentpartone & tab & "<Iptc4xmpCore:CountryCode>" & CountryCode & "</Iptc4xmpCore:CountryCode>" & return
end try
try
set CreatorContactInfo to value of IPTC tag "Contact"
set xmpcontentpartone to xmpcontentpartone & tab & "<Iptc4xmpCore:CreatorContactInfo>" & CreatorContactInfo & "</Iptc4xmpCore:CreatorContactInfo>" & return
end try
set xmpcontentpartone to xmpcontentpartone & ("</rdf:Description>") & return
else
set xmpcontentpartone to ""
end if
--xmp content, part 2
--check for existence of iptc tags, create content or empty string depending on existance of tags
if (exists IPTC tag "Category") or (exists IPTC tag "City") or (exists IPTC tag "Country/PrimaryLocationName") or (exists IPTC tag "Credit") or (exists IPTC tag "DateCreated") or (exists IPTC tag "Headline") or (exists IPTC tag "Province/State") or (exists IPTC tag "Source") or (exists IPTC tag "SpecialInstructions") or (exists IPTC tag "SupplementalCategory") or (exists IPTC tag "Writer/Editor") then
set xmpcontentparttwo to ("<rdf:Description rdf:about='' xmlns:photoshop='http://ns.adobe.com/photoshop/1.0/'>") & return
try
set Category to value of IPTC tag "Category"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:Category>" & Category & "</photoshop:Category>" & return
end try
try
set City to value of IPTC tag "City"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:City>" & City & "</photoshop:City>" & return
end try
try
set Country to value of IPTC tag "Country/PrimaryLocationName"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:Country>" & Country & "</photoshop:Country>" & return
end try
try
set Credit to value of IPTC tag "Credit"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:Credit>" & Credit & "</photoshop:Credit>" & return
end try
try
set DateCreated to value of IPTC tag "DateCreated"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:DateCreated>" & DateCreated & "</photoshop:DateCreated>" & return
end try
try
set Headline to value of IPTC tag "Headline"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:Headline>" & Headline & "</photoshop:Headline>" & return
end try
try
set State to value of IPTC tag "Province/State"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:State>" & State & "</photoshop:State>" & return
end try
try
set Source to value of IPTC tag "Source"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:Source>" & Source & "</photoshop:Source>" & return
end try
try
set Instructions to value of IPTC tag "SpecialInstructions"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:Instructions>" & Instructions & "</photoshop:Instructions>" & return
end try
try
set SupplementalCategory to value of IPTC tag "SupplementalCategory"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:SupplementalCategory>" & SupplementalCategory & "</photoshop:SupplementalCategory>" & return
end try
try
set CaptionWriter to value of IPTC tag "Writer/Editor"
set xmpcontentparttwo to xmpcontentparttwo & tab & "<photoshop:CaptionWriter>" & CaptionWriter & "</photoshop:CaptionWriter>" & return
end try
set xmpcontentparttwo to xmpcontentparttwo & ("</rdf:Description>") & return
else
set xmpcontentparttwo to ""
end if
--xmp content, part 3
--check for existence of iptc tags, create content or empty string depending on existance of tags
if (exists IPTC tag "Byline") or (exists IPTC tag "Caption/Abstract") or (exists IPTC tag "CopyrightNotice") or (exists IPTC tag "Keywords") or (exists IPTC tag "ObjectName") then
set xmpcontentpartthree to ("<rdf:Description rdf:about='' xmlns:dc='http://purl.org/dc/elements/1.1/'>") & return
try
set creator to value of IPTC tag "Byline"
set xmpcontentpartthree to xmpcontentpartthree & tab & "<dc:creator><rdf:Seq><rdf:li>" & creator & "</rdf:li></rdf:Seq></dc:creator>" & return
end try
try
set description to value of IPTC tag "Caption/Abstract"
set xmpcontentpartthree to xmpcontentpartthree & tab & "<dc:description><rdf:Alt><rdf:li xml:lang='x-default'>" & description & "</rdf:li></rdf:Alt></dc:description>" & return
end try
try
set rights to value of IPTC tag "CopyrightNotice"
set xmpcontentpartthree to xmpcontentpartthree & tab & "<dc:rights><rdf:Alt><rdf:li xml:lang='x-default'>" & rights & "</rdf:li></rdf:Alt></dc:rights>" & return
end try
--keywords, slightly different, as they need to be written as a list and not as a string
--i don't think it's a problem if we create an empty list if there are no keywords present.
set xmpcontentpartthree to xmpcontentpartthree & tab & "<dc:subject><rdf:Bag>" & return
--make list item for every keyword
try
repeat with n from 1 to count of keywords
set cursubject to name of (keyword n)
set xmpcontentpartthree to xmpcontentpartthree & tab & tab & "<rdf:li>" & cursubject & "</rdf:li>" & return
end repeat
end try
set xmpcontentpartthree to xmpcontentpartthree & tab & "</rdf:Bag></dc:subject>" & return
try
set title to value of IPTC tag "ObjectName"
set xmpcontentpartthree to xmpcontentpartthree & tab & "<dc:title><rdf:Alt><rdf:li xml:lang='x-default'>" & title & "</rdf:li></rdf:Alt></dc:title>" & return
end try
set xmpcontentpartthree to xmpcontentpartthree & ("</rdf:Description>") & return
else
set xmpcontentpartthree to ""
end if
--part four. aperture doesn't seem to export anything there
set xmpcontentpartfour to "<rdf:Description rdf:about='' xmlns:photomechanic='http://ns.camerabits.com/photomechanic/1.0/'>
</rdf:Description>" & return
--part five. rating
set xmpcontentpartfive to "<rdf:Description rdf:about='' xmlns:xap='http://ns.adobe.com/xap/1.0/'>" & return
try
set Rating to main rating
set xmpcontentpartfive to xmpcontentpartfive & tab & "<xap:Rating>" & Rating & "</xap:Rating>" & return
end try
set xmpcontentpartfive to xmpcontentpartfive & "</rdf:Description>" & return
--join everything
set xmptext to xmpheader & xmpcontentpartone & xmpcontentparttwo & xmpcontentpartthree & xmpcontentpartfour & xmpcontentpartfive & xmpfooter
--write file
my writexmpFile(xmptext, xmpPath)
end if
end tell
end repeat
display dialog "Processed " & mastercount & " referenced and online image(s)." buttons {"OK"} default button 1
end tell
end run
-- write xmp sidecar file routine
on writexmpFile(theContents, xmpFileName)
--tell application "Finder"
try
open for access xmpFileName with write permission
set eof of xmpFileName to 0
write (theContents) to xmpFileName starting at eof
close access xmpFileName
on error
try
display dialog xmpFileName
close access xmpFileName
end try
end try
--end tell
end writexmpFile
--this part copied from Brett Gross-------------------------------------------------------------------------- --------------------------------
on getLibPath()
tell application "System Events" to set p_libPath to value of property list item "LibraryPath" of property list file ((path to preferences as Unicode text) & "com.apple.aperture.plist")
if ((offset of "~" in p_libPath) is not 0) then
-- set p_posix to POSIX file p_libPath
set p_script to "/bin/echo $HOME"
set p_homePath to (do shell script p_script)
set p_offset to offset of "~" in p_libPath
set p_path to text (p_offset + 1) thru -1 of p_libPath
set g_libPath to p_homePath & p_path
else
set g_libPath to p_libPath
end if
end getLibPath
--end brett gross part

imigra wrote:
I've written a script to write xmp sidecar files for referenced and online images (the 2 conditions in the script) of the selected images. I looked for a while at system events and other stuff to be able to write the xmp file, but i'm not a programmer, so in the end i chose the long and dirty way to do it.
This script will export all iptc expanded fields as aperture does (creating basically the same file). It can be easily adjusted to include other tags, even custom ones.
Excellent stuff!
I don't know how to get at the adjustments for images, otherwise those could be included as well.
They are stored as binary data in the Version XML files at the bottom level of the Library package. You can also have a look around in the ZRKIMAGEADJUSTMENT table, but again the actual settings for each adjustment are in binary form.
If anyone has the energy to clean this up and make it faster, feel free to do so.
As far as I can remember, Aperture uses the 'proper' IPTC tag names when accessing them via AppleScript, so you may be able to do a loop through all the IPTC tags for each image, rather than picking out each specific one. But that would need checking. The EXIFTools site is a good place to find out about the different ways that IPTC data can be described.
Next, I'm going to try to write a script to do the opposite, import xmp sidecars for imported online and referenced files.
Don't rush unless you feel like it - I've already started planning out a free (as in beer and speech) XMP importer with a GUI so that you can choose how to map the XMP CORE tags that don't exist in Aperture. You've given me an extra idea, though - if we can decide on a set of custom tags, my importer could map the XMP CORE tags to them and your exporter could export those tags.
Thanks for the work!
Ian
P.S. I'll check through your script tomorrow, some of the database tables changed between 1.5.6 and 2.0, so you might need to add in a version check to be really thorough.

Can I create multiple links to the same file without duplicating file?

does anyone know if it is possible to create multiple links to the same file using iWeb without the program automatically making multiple copies of that file in the published output? It seems that one file is created for each link.
Thanks!

Hi Franz,
have a look at the second method on this page
http://alyeska.altervista.org/en/iWeb_Downloads.html
see if you understand how it works (if you don't, please ask me)
Regards,
Cédric

How to get the jar file without knowing its name and any class inside it?

Hello, everybody!
I would like to know if there's a way to get a reference programatically to the initial jar without knowing its name and any class contained in it. By "initial jar" I mean the jar that was called in the prompt, like this:
java -jar jarfile.jaror in another way, in a graphical system. To be sincere what I really want is to get a reference to the jar's manifest, but I know if I can get a reference to the jar I can get a reference to its manifest file. Or if you know a way to get the manifest directly, it would also help. So, is there a way to do this?
Thank you.
Marcos

jverd wrote:
marcos_aps wrote:
abillconsl wrote:
Can you be more specific - IOW, can you cite a specific case?Absolutely. I want to access the jar in source code with the java.util.zip.JarFile class, for example.But why? You still haven't provided a use case or explained what you're trying to accomplish. As already pointed out, whatever you're trying to do, this is a brittle solution. If you explain what you're trying to accomplish with this, somebody may be able to suggest a better approach.jverd, I explained for baftos. Anyway, I will try to be more specific. I start my sytem like this, from, say, for example, jar1.jar:
import br.product.System;
public static void main(String[] args)
System.start("NameOfTheSystem");
}The System class is in util.jar, for example. This jar is used by all systems. I wouldn't like to pass in the name of the system, as above. I would like that the System class could read it from jar1.jar's manifest file. I just would like to have this:
import br.product.System;
public static void main(String[] args)
System.start();
}It is more elegant and I don't have the name of the system in two places: code and manifest file.
Marcos

Can I read the dd file without the device

Hello,
Is it possible to read the DD file in Configurator 3.1 without connecting to the device?
The short version of the story...... I have only used the configurator a few times and was walked through the process. Now I need to figure out how to control a positioner (DVC6000f), I just need to stroke a valve open, closed and position it somewhere between the two. I am not able to connect to a positioner right now, so I would like to load the DD file into the configurator and look around to see if I can figure out how to give it a position command signal. Once I am able to stroke the valve I will need to write a simple LabView program to make it easier than the configurator program.
What is the best way to figure out which block I need to position the valve? I am hoping when I actually connect to the positioner it will be obvious, but life is usually not that easy.
Bryan

Hello Josiane,
Thank you for the information, I was able to load the DD and look around the configuration blocks. Initially engineering only asked about simple control of the valve, today things have changed. I found out that there are to be many tests performed on the valve including sine wave response, step testing, Hysterisis, linearity, dead band, and some others.
So my question now is how well can I control the positioner by writing a Vi in LabView? I can perform the above tests on a positioner with a 4-20mA output signal from my DAQ. Would it be possible to write the 4-20mA output signal into an input block (instead of an analog output channel) and control the valve in real time? I could just change the mA signal into whatever units the positioner wants. Or what would be the best approach to control the valve for testing?
Is there a number I can reach for support? It might be easier than email.
Bryan

I am in hurry,how to save the xml file without attributes

i have the following xml file with attributes,
<?xml version="1.0"?>
<Ve2.Configuration>
     <Ve2.Displaymanager>
          <type type="combobox">eVeDisplayStandardType</type>
          <setCounter type="bool">false</setCounter>
          <frames type="textfield">20</frames>
     </Ve2.Displaymanager>
</Ve2.Configuration>
but i want to save it without attributes, that means, my saved xml file look like this.:
<?xml version="1.0"?>
<Ve2.Configuration>
     <Ve2.Displaymanager>
          <type >eVeDisplayStandardType</type>
          <setCounter >false</setCounter>
          <frames20</frames>
     </Ve2.Displaymanager>
</Ve2.Configuration>
how can i do it with java.

If you know the format of the XML file, then you can write a straight forward XSL file to transform it.
Paul
www.codetelligence.com

How to read the data file and write into the same file without a temp table

Hi,
I have a requirement as below:
We are running lockbox process for several business, but for a few businesses we have requirement where in we receive a flat file in different format other than how the transmission format is defined.
This is a 10.7 to 11.10 migration. In 10.7 the users are using a custom table into which they are first loading the raw data and writing a pl/sql validation on that and loading it into a new flat file and then running the lockbox process.
But in 11.10 we want to restrict using temp table how can we achieve this.
Can we read the file first and then do validations accordingly and then write to the same file and process the lockbox.
Any inputs are highly appreciated.
Thanks & Regards,
Lakshmi Kalyan Vara Prasad.

Hello Gurus,
Let me tell you about my requirement clearly with an example.
Problem:
i am receiving a dat file from bank in below format
105A371273020563007 07030415509174REF3178503 001367423860020015E129045
in this detail 1 record starting from 38th character to next 15 characters is merchant reference number
REF3178503 --- REF denotes it as Sales Order
ACC denotes it as Customer No
INV denotes it as Transaction Number
based on this 15 characters......my validation comes.
If i see REF i need to pick that complete record and then fill that record with the SO details as per my system and then submit the file for lockbox processing.
In 10.7 they created a temporary table into which they are loading the data using a control file....once the data is loaded into the temporary table then they are doing a validation and updating the record exactly as required and then creating one another file and then submitting the file for lockbox processing.
Where as in 11.10 they want to bypass these temporary tables and writing it into a different file.
Can this be handled by writing a pl/sql procedure ??
My findings:
May be i am wrong.......but i think .......if we first get the data into ar_payments_interface_all table and then do the validations and then complete the lockbox process may help.
Any suggestions from Oracle GURUS is highly appreciated.
Thanks & Regards,
Lakshmi Kalyan Vara Prasad.

How do I choose the lates file from a directory in LabView? I want to use the latest file without having to choose it manually

When a LabView program starts up, I want it to go to a directory and choose the latest file there. Is there a way to sort the files to get the latest?

Hello,
Check annex.
Hope it helps,
Paulo
Attachments:
LatestFile.vi ‏24 KB

I have a time capsule with a ton of media on it. Will Apple TV recognize and play the media files without itunes?

I have a time capsule with all my mdeial files. Will apple TV play the amedia files with out a need for pc or Itunes?
Thank you in advance

rfromla jolla,
What I'm hearing now is that any NSA still needs some iTunes interface to "go through". I'm going to use iTunes on my iMac as the pass through. I keep it running just about all the time.
You can use the little Apple Mac mini fine. If I were rich I'd do that.....
Oh well.....

How can I see the path from the preview file (*.prel) to my video files ?

Because a lack of hard disk space I have moved my video files to another drive and therefore unfortunately destroyed the relative connection to the preview file (*.prel).
Therefore the videos are not to be seen in the preview file any more.
How can I get information about the relative path between the preview file and the place for the original video files so I can get those back in the original position ?
or:
It may be possible to change the path for every clip in my preview file - but how ?
I can read answers in English, German or Danish.

hansk
What version of Premiere Elements on what computer operating system?
Generalizing for now...
If you know where the files are by actually seeing them in their hard drive save location and you are getting "Where is the file ______?" messages, then you use those
messages to reconnect the source media to the project. Are you getting those messages and have you tried for the reconnects that way?
If edits are involved in the files that have become disconnected to the project, you can also consider the program's Replace Footage feature.
ATR Premiere Elements Troubleshooting: PE11: Replace Footage
Typically either of these ways is one at a time reconnects. With the "Where is the file _____?" message way sometimes you get lucky (depends on the circumstances) and more
than one file at a time might reconnect.
Please review and consider. Any questions or need clarification, please ask.
ATR

HOWTO: Generate the sidecar file without rendering/generating video?

Similar Messages

Maybe you are looking for