Howto get result of the calling-step in SequenceFilePostStepFailure

Hello,
i have a sequence with a SequenceFileCallback "SequenceFilePostStepFailure".
How can i create a popup that displays the following values:
- Name of calling-step
- sequence-name of calling step
- result of calling step
- limit (low, high, string) of calling step
I found:
RunState.Caller.Step.Name,
RunState.Caller.Sequence.Name
but nothing for result and limits.
Thanks for any help

This should handle what you're looking for and then some. I use this with the retry expression that allows for the whole sequence to be repeated. Probably shouldn't allow for the "Force Pass". I think it origianally came from TestStand examples and I modified it, but I couldn't tell you which example.
Why do geeks think Halloween and Christmas occur on the same day?
Because 31oct = 25dec!
Attachments:
PostStepFailure2.seq ‏13 KB

Similar Messages

HT5232 when trying to transfer my cellular from one ipad to a new one i get through the step where it appears i log in and then get stuck on the next step to choose a plan. any ideas?

I am trying to transfer my cellular plan from my old ipad to the new one and get stuck after the second step. I currently log in, choose the plan which is the same as the old plan and nothing happens from there. The only way to get out of the screen is to cancel.
Any ideas?

Hello Deannefromco,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
When you enable the "Manually manage" option, you can use Autofill to quickly sync audio content from your music library or a selected playlist.
iTunes: Syncing media content
http://support.apple.com/kb/ht1351
Best of luck,
Mario

Add 2nd sharpening step which acts upon the results of the first step

Consider adding a 2nd sharpening step which acts upon the results of the first step. For artsy reasons, you might want normal sharpening, then enhance edges as a second step. For lower quality images, two sharpenings can be an effective form of noise reduction. For whatever reason I often run two sharpening steps in a row in CS5, where the second step would look bad without the first.

Scott T Martin wrote:
Lightroom already has 3 levels of sharpening: "capture" sharpening in the develop module (detail panel), "creative" sharpening with the localized adjustment brush and "print" sharpening in the print module.
Is there a problem with the current implementation that you think could be improved?
A good example is one I had yesterday: a raw camera file of a water action shot where it is desirable to have two sets of sharpen settings, --one finer radius (.8 to 1.2) for the normal sharpening of the shot, and then another step which is a coarse one (about 2.1 + separate detail/masking setting) to enhance water droplets. The second masking only applies to the second step, thereby preserving the desirable sharpened detail of the first step. This allows the water droplets to be targeted in a narrow bandwidth, and made spherical and sparkely, giving the photo depth. The same could apply to coarse animal hair, ice crystals, etc. The reason I want the sharpen steps in "capture" mode is so they can be copied separately and pasted to multiple photos.
The only way to do this now is to use CS5 to sharpen the water droplets after the normal sharpen which then severs the chain of Lightroom history. It's much harder to reverse a previous change once Photoshop is resorted to. And subsequent changes do not behave the same on a non-raw image.
What type of image content are you using that the current set of tools isn't satisfactory? (ie: are you talking about camera RAW files or film scans that were shot out of focus? More details would help.)
Actually both. Other uses I've had for a second sharpening step is to target, and enhance edges on lower quality scanned images. However I have less of a problem fixing these images in Photoshop because: they are usually one-of-a-kind, and they have no raw data to work with. I just make sure the scan is as accurate as possible and that becomes the starting point.
The brush sharpen is handy but not for the above purpose requiring a different radius. And of course copy/pasting brush strokes does not work on action photos.
I hope this helps to clarify my request

Today I purchased an ATT mifi liberate hotspot to use with my early 2011 MBP, the iPad Air I also purchased today. I've been testing out all the settings on the hotspot, but can't seem to get results with the GPS switch. GPS just spins, searches, doesn'

Today I purchased an ATT mifi liberate hotspot to use with my early 2011 MBP, along with the iPad Air (128GB, WiFionlyI also purchased today. I've been testing out all the settings on the hotspot, but can't seem to get results with the GPS switch. GPS just spins, searches, doesn'. I can access the hotspots settings in Safari on the laptop and still the problem persisits. I did install some new GPS drivers recommended by AT&T, that doesn't seemed to have work. Could it be that there is a port wrong somewhere? Can anybody make heads or tails of this? Any assistance is gratefully appreciated...

Today I purchased an ATT mifi liberate hotspot to use with my early 2011 MBP, along with the iPad Air (128GB, WiFionlyI also purchased today. I've been testing out all the settings on the hotspot, but can't seem to get results with the GPS switch. GPS just spins, searches, doesn'. I can access the hotspots settings in Safari on the laptop and still the problem persisits. I did install some new GPS drivers recommended by AT&T, that doesn't seemed to have work. Could it be that there is a port wrong somewhere? Can anybody make heads or tails of this? Any assistance is gratefully appreciated...

How to get reults in the calling program that are returned by an API consol

Hi,
I am using a SPARQL query in a java program that is using a external API. The results are returned on console. I need to get results into some variables in my program so that I can use those further. There are 2 types of results returned; say one is name & other address. How can I do this.

thanX a lot.
Actually the method that is called to pass the query object in this statement:
AGSparqlSelect.doSparqlSelect(sq);is
   public static void doSparqlSelect(SPARQLQuery sq) throws AllegroGraphException {
          if (sq.isIncludeInferred()) {
               System.out.println("\nQuery (with RDFS++ inference):");
          } else {
               System.out.println("\nQuery:");
          System.out.println(" " + sq.getQuery());
          ValueSetIterator it = sq.select();/*@return; run SPARQL query, return an array
                                                  of result sets. Each result set is an array of values.*/
          AGUtils.showResults(it);
     }and this method actually returns the results on console which I need to get in some variables.
     public static void showResults(ValueSetIterator it) throws AllegroGraphException {
          String[] var = it.getNames();
         System.out.println("Number of solutions: " + it.getCount());
         for (int i=0; it.hasNext(); i++) {
               ValueObject[] objects = it.next();
               System.out.println("Solution " + (i+1) + ":");
               for (int j = 0; j < objects.length; j++) {
                    ValueObject term = objects[j];
                    System.out.println(" " + var[j] + " = " + printValueObject(term));
     }So do you have any idea now how can this be done....?

Two statements, get results from the first statement?

Ok maybe I made it sound a little harder than it is, but this is what I am trying to do. I have a result set from from a database call when I pass in the username and password . In the 1st call I get the Users info: User_ID, first_name, lastname, etc...
But I either need to get info from the first statement, and pass it to the 2nd statement or just do two statement calls calling the same info and passing it to my user object? I dont know which if any is faster, or better. The only thing I need from the first statement is the user_id. In the 2nd statement I need the user_id to find out the user permissions.
Here is the original code when It was getting the user info and permissions from the same table. try
           dba = new DbAccess();
           java.sql.Connection con = dba.getConnection();
java.sql.DriverManager.getConnection("jdbc:oracle:thin:@kares:1523:appd","user","pass");
           ps = con.prepareStatement("SELECT USER_ID, LAST_NAME, FIRST_NAME, LOGIN, PASSWORD," +
           "X, Y, Z FROM RD_USERS WHERE LOGIN=? and PASSWORD=?");
           ps.setString(1, user);
           ps.setString(2, pass);
           rs = ps.executeQuery();
           // set the user attributes
           if ( rs.next() )
              loginValid = true;
              setUserId(rs.getInt("USER_ID"));
              setLastName(rs.getString("LAST_NAME"));
              setFirstName(rs.getString("FIRST_NAME"));
              setLoginName(rs.getString("LOGIN"));
              setPassword(rs.getString("PASSWORD"));
              X = rs.getBoolean("X");
              setX(X);
              Y = rs.getBoolean("Y");
              setY(Y);
              Z = rs.getBoolean("Z");
              setZ(Z);
           else
              setLastName(null);
              setFirstName(null);
              setLoginName(null);
              setPassword(null);
              setX(false);
              setY(false);
              setZ(false);
           rs.close(); rs = null;
           ps.close(); ps = null;
           //dba.close(); dba = null;
        } The code above gets the info from one table, I now need to get the X, Y, and Z from a different table, but I need the USER_ID first. So, the first table is set up with the user_id and user info, and the 2nd table is set up with the user_id and user permissions

Thanks DrClap I started on the the query and I did it a little differently, but it should hopefull do the same thing. my tables are constructed as so:
USER
     USER_ID
     FIRST_NAME
     LAST_NAME
     USER_NAME
     PASSWORD
     ETC....
USER_PERMISSIONS
     USER_ID
     PERMISSION X
     PERMISSION Y
     PERMISSION Z
     ETC....
My Select looks something like this
ps = con.prepareStatement("SELECT a.USER_ID, a.LAST_NAME, a.FIRST_NAME, a.USER_NAME, a.USER_PASSWORD," +
           "b.X, b.Y, b.Z FROM RD_USERS a, RD_PERMISSIONS b WHERE USER_NAME=? and USER_PASSWORD=?");
This is where I come to a crossroads, Can I add on another AND to say "WHERE a.USER_ID = b.USER_ID
and do I use the =, or is it ==, or .equals(). Thanks in advance.
orozcom

How to get data from the called program using SUBMIT in a background job?

Hi Experts,
I've a program which creates a background job using JOB_OPEN and JOB_CLOSE function modules.
Between the above function modules I need to call a program using SUBMIT VIA JOB statement.
My problem is, How do I fetch some data in an internal table in the called program to the calling program after the SUBMIT statement?
I tried to EXPORT and IMPORT the data, but they are giving a failed sy-subrc when using this background job.
Kindly let me know your inputs and valuable suggestions.

Kumar,
When we execute a program as a background job then the output will be sent to Spool which needs to be fetched again.I guess we need to use Submit via spool as mentioned by Rajat.
Check these threads to get some idea
submit report to spool & import spool id
Re: Generate Spool for a report
K.Kiran.

Why does itunes match get stuck on the 2nd step and then cause itunes to crash?

hello. I have been having an odd and annoying problem with itunes match for the past few months. Everytime I launch itunes, match comes on and starts working but then crashes in the second step. It says that it is matching my songs with the songs in the itunes store and when it gets to about 4500 out of 4600, it stops and then a pop up comes up that says itunes has stop working and it needs to close. In addition, i just tried to add some new music to my library and it's cloud status is "waiting" and will not change. Oddly, A few of the songs did load (only 7 out of 48). I have tried restarting the computer and updating match in the itunes store. I even uninstalled itunes and redownloaded it. This is getting rather frustrating and help would be very much appreciated. Thanks

YES.
I posted a question about this in another thread and it got no responses.
It's not the internet connection.
I also have an iPhone 4. My Match library is quite large.
When it gets hung up like this, you can look at the download status in the iTunes Store app and it will show "Processing..." as the status on those stuck files. The others just sit and wait.
If you delete the stuck downloads, it won't successfully download those files (not for me at least) unless you restart your phone.
I don't have the answer, unfortunately.

How to get Refrence of the calling Object in the called method

Is there any way to achive below without having explicitly passing or storing a's refrence.??
class A {
public void run(){
B b= new B();
b.doStuff();
public static void main(String [] args){
A a = new A();
a.run();
class B {
public void doStuff(){
/* ??????????? Is it possible to get Instance of A, a's refrence without changing doStuff() signature */
If not, how does the following join() method of Thread gets the refrence of the Instance of Calling Instance(t1 & t2) , so as to attach the calling Thread at the end of called Thread(t) ??
class TestThread extends Thread{
public void run(){
for (int i=0; i < 10; i++)
     System.out.println("Iteration:"+i+" of TestThread");
class A extends Thread{
Thread t;
public A(Thread t){
this.t=t;
public void run(){
try {
t.join();
}catch (InterruptedException e){}
for (int i=0; i < 10; i++)
     System.out.println("Iteration:"+i+" of A Instance"+this);
public class Main{
public static void main(String [] args) {
TestThread t = new TestThread();
A t1 = new A(t);
A t2 = new A(t);
t1.start();
t2.start();
t.start();
}

Reposting with markup.
class A {
    public void run(){
        B b= new B();
        b.doStuff();
    public static void main(String [] args){
        A a = new A();
        a.run();
class B {
    public void doStuff(){
         * ??????????? Is it possible to get Instance of A, a's
         * refrence without changing doStuff() signature
}If not, how does the following join() method of Thread gets the refrence of the Instance of Calling Instance(t1 & t2) , so as to attach the calling Thread at the end of called Thread(t) ??
class TestThread extends Thread{
    public void run(){
        for (int i=0; i < 10; i++) System.out.println("Iteration:"i" of TestThread");
class A extends Thread{
    Thread t;
    public A(Thread t){
        this.t=t;
    public void run(){
        try {
            t.join();
        }catch (InterruptedException e){}
        for (int i=0; i < 10; i++) System.out.println("Iteration:"i" of A Instance"+this);
public class Main{
    public static void main(String [] args) {
        TestThread t = new TestThread();
        A t1 = new A(t);
        A t2 = new A(t);
        t1.start();
        t2.start();
        t.start();
}

IPad / iTunes sync gets stuck at the last step

Whenever I sync my iPad and iTunes, it doesn't complete the last step and gets stuck on "Waiting for items to copy".
First it was with "Step 7 of 7: Syncing Genius data to iPad", so I deleted all Genius stuff and links to it. Since then it gets stuck with: "Step 6 of 6: Synching Artwork to iPad" and just hangs with it forever.
I am an Apple newbie, the iPad 3 is my first Apple appliance. What can I do to avoid having to exit syncing by unplugging the iPad? (NB iTunes runs on a PC with Windows 7.)
Thanks, Joseph

It may be that you have a couple of problem files. I have a similar issue, where some music, that I purchased via iTunes, won't sync on to my iPod.
I'd suggest that you start my turning off as much syncing as you can in iTunes. Use iCloud to transfer your calendars, contacts etc.
Then try syncing some of your music and other media manually. If there are errors, then iTunes should flag them up by saying "Could not copy xxxx because ..."
Personally, I only sync media manually, as I don't always want iTunes to perform a full sync every time I start it up. As my iPad is set to sync wirelessly, it connects to iTunes every time I open it.

How do I get rid of the caller id pic as background when I make a call?

I have assigned a picture to my contacts, however, when I call, the background becomes the picture I assigned. How do I make it so that when I call, my set wallpaper comes up with the caller ID pic in the corner, so that it looks like the one on the apple homepage?
Can you do this or did apple change the program so that the caller ID photo automatically becomes the background?
Any help is appreciated. Thank you.

Settings > AirPlay > Conference Room Display > Off.

How to get back to the calling application ?

Hi Friends ,
            I am having a BSP application which is being called from different Planning layouts in BPS .
Its a stateful application and I am finding that when i hit standard browser Back button i am returning to my application again .
I tried creating a button and passing the javascript method history.back()
<htmlb:button id       = "BACK"
                            onClick = "BACK"
                            text     = "BACK"
                            tooltip = "Back"
                       disabled = "<%= v_save_disable %>"
                       onClientClick="history.back();"
                            width    = "15" />
it is notworking.
Please let me know how can i resolve the issue ? I have another idea to divert the user to the calling application using URL but dont know how to capture the URL of calling application ?
i appreciate your contribution in advance.

<i>It generates a BSP in which i am adding a URL link to call my application.</i>
while adding the url add a parameter to it masterdatabsp.htm?frompage=<currentpagename>
(runtime->PAGE_NAME will return current page name)
and in the master data maintenance bsp page declare a page attribute and name it frompage type string and check the auto check box.
now within your masterdatamanintenance bsp you will have the calling page name.
Hope this is clear. if not do getback.
Regards
Raja
i work in a place where weekends are on thursdays and fridays - today is a working day

My iPad gets stucked in the last step of the sync with the computer.

When connecting the iPad to the computer the iTunes starts, reconizes my iPad and starts the sync of the iPad.
It syncs the contacts, calendars, pictures, music, etc, but in the last step (7th; "finishing Sync") it stucks and stays for ever without finishing.
I cannot load a previous backup because as soon as I connect the iPad to the computer the Sync process starts and no button is available.
I've tried to load again iTunes to start from the begining but it is still saying the same, that the Sync process is finishing and is blocked there.
Any help?
Thanks a lot.

Hi Demo,
I've tried what you say but, if I'm doing it right, it doesn't work because after rebooting it goes again to syncing and stucks on the last step.
Nevertheless let me check if I'm doing it right; When you say "Before you restore from the backup, quit iTunes, ...." you mean "Before" or "After" because I don't understand how I could reboot the iPad BEFORE I restore from the Backup if it is already restoring.
Just let me write down the procedure to check that it is the right one:
1- I launch iTunes (iPad not connected) and go to Edit>Preferences>Devices, and I check the box to Prevent the iPad to syncing automatically. I click OK.
2- I quit itunes.
3- I connect the iPad to the computer.
4- I launch iTunes.
5- I go to Restore from Backup
6- Restore from Backup is finished
7- I quit iTunes
8- I disconnect the iPad from the PC
9- I reboot my PC
10- I reboot my iPad by holding down on the sleep and home buttons... iPad stars.
11- I connect the iPad to my PC.
12- I launch iTunes
13- I click on sync button.
If the procedure is right then my problem must be another one because when I do it and it starts syncing again the same problems comes back again and the syncing never stops at the last step.
Thank you anyway for your time and support.
Best regards,
Francisco

Record Results from sequence call inside of SequenceFilePostStepFailure Callback

Test Stand 3.1
When a step fails I use SequenceFilePostStepFailure Callback.
In there I have prompt:
1. Continue
2. Terminate
3. Terminate (thus calling a power down sequence file)
Problem is that when Option 3 is used. There are no results recorded from that sequence call because it was invoked from the Callback.
How do I force record results when that sequence file is called?
Attachments:
RecordResultsProblem1.zip ‏10 KB

Hello Jaws8you,
After looking into this issue further, it appears as if the link I posted has some great information but is not an exact fit for your particular situation.
Because results from sequence callbacks will not populate in the report, we need to make sure and have any results we would like included in the main sequence.
In your case we are just going to put the sequence call in the "Clean Up" tab, which will report the data, and is good programming practice.
So to fix this problem, let's go ahead and try this:
1.) Change the variable "Locals.ButtonPressed" to FileGlobals.ButtonPressed in the locations that you have it so far
2.) "Cut" the "Call Main Power Down" sequence call from the "SequenceFilePostStepFailure" step, and copy it to the "CleanUp Tab" of "Main Sequence"
Basically, that should be it. What this will do now is run the "Call Main Power Down" sequence when button 3 is pressed and skip this step whenever button 1 or 2 is pressed. The result is then published in the report.
This should work out the best for you, thanks for posting and have an awesome day!
With warm regards,
David D.

Synchronized Send for getting results from the database

I am new into XI. I have a scenario where id will be read from a file, a selection to be made from database and the results written to a file. I have created a BPM
receiver -> synchroizedSend(JDBC) -> Send
Please suggest me how to use Synchronized send to execute a query and getting the RsultSets.

Hi
Check this relative thread for the synchronous send step
Synchronous Sending followed by Transformation
were can i see synchronous send in the BPM editor
Message was edited by:
Anusha Ramsiva

Howto get result of the calling-step in SequenceFilePostStepFailure

Similar Messages

Maybe you are looking for