Howto stop navigation. in a VO.

I need to avoid a ViewObject navigate to a different row before the user commits.
I can try to intercept all navigation methods, verify if transaction is dirty and trhow an error.
However many and many methods navigate to a different row and then I can forget one or more events.
Is there any way to do this operation in a single (or a few) point ?
Tks
Tullio

Hi,
As far as I know, the server-side navigation event occurs after the navigation itself... So it's quite impossible to "rollback" the navigation.
This is one of the reasons why we used the client-side event.
Maybe Oracle knows something I missed.
(Note: we're still using 9.0.4, did not check in 9.0.5)
HTH,
Adrian

Similar Messages

  • Defer train-stop navigation for Custom Processing

    Hi,
    I'm using JDeveloper version - 11.1.1.6
    I'm using Train Component in one of the task-flow with 3 train stops. I want to defer the Train stop navigation if the custom validation fails.
    I referred the sample 97 in ADF Code Corner - "How-to defer train-stop navigation e.g. for custom form validation".
    I implemented the code in similar lines. I'm able to see the warning dialog in my application when validation condition is not met. When i click the 'OK' button, I'm able to navigate to the next train stop.
    But when I click the cancel in the dialog and update the view to fulfill the condition, I'm not able to navigate to next stop.
    My Code snippet is as follows:
                   <af:train value="#{controllerContext.currentViewPort.taskFlowContext.trainModel}" id="t1" var="trainNode" rendered="#{(pageFlowScope.TDMConnectivityChannelTreeBean.hideSearch)}">
                        <f:facet name="nodeStamp">
                            <af:commandNavigationItem id="cni1" disabled="#{trainNode.disabled}" textAndAccessKey="#{trainNode.textAndAccessKey}"
                                                      visited="#{trainNode.visited}" actionListener="#{pageFlowScope.TDMConnectivityChannelTreeBean.processTrainStop}">
                                <f:attribute name="trainStopNode" value="#{trainNode}"/>
                            </af:commandNavigationItem>
                        </f:facet>
                    </af:train>
                    <f:facet name="bottom">
                        <af:popup contentDelivery="lazyUncached" id="pt_p1" binding="#{backingBeanScope.trainSourceDialog}">
                              <af:dialog id="pt_d1" title="Confirmation Dialog" dialogListener="#{pageFlowScope.TDMConnectivityChannelTreeBean.processDialogAction}">
                                    <f:facet name="buttonBar"/>
                                    <af:outputText value="Source Channels are not selected, Do you want to navigate to Target Connectivities?" id="pt_ot1"/>
                               </af:dialog>
                         </af:popup>
                    </f:facet>
            Please let me know if I'm missing something here.
    Thanks
    Ravi

    Frank,
    I tried to put the following code in the action listener method and I'm able to navigate to next stop.
                    UIComponent comp = (UIComponent) ADFUtil.evaluateEL("#{backingBeanScope.trainSourceDialog}");
                    if (null != comp) {
                        UIComponent dialog = comp.getChildren().get(0);
                        if (null != dialog) {
                            queueTrainStopEventToRegion(selectedTrainStop.getOutcome(), dialog);
                    }Not sure why I have to do this. Can you comment on this?
    Thanks
    Ravi

  • Date format mask failure stops navigation

    I'm trying to allow users to enter dates in multiple formats.
    My date items already have format mask 'YYYY-MM-DD'.
    I have added ON-ERROR code that handles errors like FRM-50003 so that users can enter '29-APR-2011' and the error handler fills the date item with '2011-04-29'.
    However, when users enter '29-APR-2011', then tab out of the item, the format mask error stops navigation to the next item. The user needs to tab a second time to actually leave the item.
    There are no FORM_TRIGGER_FAILURE exceptions in my code that would stop navigation to the next item.
    How can I allow users to enter data in formats other than the one I've specified for my format mask, but not have to tab twice to exit the item?
    I know that I can add a KEY-NEXT-ITEM trigger like the following. Unfortunately, I would have to re-write much existing code.
    enter;
    next-item;
    I know that I could remove the format mask and let WHEN-VALIDATE-ITEM handle things. But then I have to add validation code to all my date items. I really just want to write one piece of code that is called from ON-ERROR so that I don't have to re-write all existing code.
    Suggestions?
    Thanks,
    -Ken
    Edited by: Ken Anderson on May 27, 2011 3:12 PM

    With FORMS_USER_DATE_FORMAT you can specify different allowed input masks without having code in your form. Heres some more info Re: Date field in 10g Form

  • Stopping Navigation Between two items

    Dear All,
    i have two items in JSF Page and first contains contains validation (with auto submit),
    if i am trying to navigate from first two second with false data , first item will be read , but navigation still going second one, i need to stop this navigation.
    Please Advise

    I believe that in general you should not design web application like that.
    In general you cannot prevent user to navigate away from web pages and components.
    He can allways close explorer or type a diferent url.
    For specific cases though you can do it by java scripts and there is an example at Andrejus blog:
    [http://andrejusb.blogspot.com/2008/04/adf-faces-rich-client-complex.html]
    Yet this would require a lot of effort to do it in all validations.

  • Stop navigation in FPM on error message

    Hi All,
    I am working on FPM framework . I am raising error message on click of the review button.
    I have a requirement to stop the navigation further on error message.
    User must click the flight details custom button before clicking the review button.unless the flight details button is not clicked user should not go to the next screen.
    I hope I am clare
    any inputs
    Thanks
    Santosh

    Hello Santosh,
    it just an idea...
    1/ Set a flag (default abap_false) attribute to true when flightdetails is clicked in the controller of your component as Lekha said;
    2/ If your review custom button is part of the FPM toolbar, as I suppose it is, you can trigger the event in the controller process_event method, check if flag is true else call the FPM message manager.
    for example with a T100 msg:
    CALL METHOD wd_this->mr_message_manager->report_T100_MESSAGE
         EXPORTING
           IV_MSGID          = 'MSGID'
           IV_MSGNO          = 001
           IO_COMPONENT      = wd_this
           IV_SEVERITY       = if_fpm_message_manager=>GC_SEVERITY_ERROR
           IV_LIFETIME       = if_fpm_message_manager=>GC_LIFE_VISIBILITY_AUTOMATIC
    *            IV_PARAMETER_1    =
           IO_ELEMENT        = lo_el_sflight_selection
           IV_ATTRIBUTE_NAME = 'CARRID'.
    Where the mr_message_manager is a reference to of IF_FPM_MESSAGE_MANAGER.
    Hope it can help you.
    Best Regards

  • Maps stops navigating after leaving wifi

    My wife has been trying to use maps for navigation on her phone. It starts out fine, but as soon as she leaves the wifi connection from our house the voice navigation stops and won't restart. Any suggestions? Tried restarting her phone. Checked her settings. Only thing I can think of is restore the phone.

    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.

  • Daqmx howto stop trigger on timeout

    Hello,
    I've got a problem on a trigger.
    When my signal doesn't arrive, the trigger doesn't occur. My task has also a time-out, so when the timeout arrives, I want to sto the task. But then in the "RemoveHandler" function an exception is raised. In fact I want to stop the trigger when
    a timeout occurs.
    Could you help me ?
    Thanks.

    Bon ne voyant pas de réponse, j'essaie de préciser le pb :
    * je fais une acquisition qui démarre sur triggerde la voie AI1
    * la lecture se fait de manière asynchrone sur la voie AI1
    * j'attends l'arrivée d'un evenement posté sur réception handler
    m_P_O_toolBox->F_acquisitionTrigger
    m_P_O_toolBox->startTension
    * Attente fin de la mesure pedant 10s maxi
    F_waitingForDataReadyTension (m_P_O_toolBox->F_getEventDataReadyTension(), (DWORD) 10000)
    * Arret mesure
           F_stopperTrigger;
    Tout va bien lorsque le signal de trigger arrive.
    En revanche si le signal de trigger n'arrive pas, je sors en time-out dans la fonction "waitingForDataReadyTension"et lorsque je fais un arrêt de la tâche j'ai l'erreur -200284.
    Après quelques recherches je pense que c'est parce que le trigger attends toujours le signal de déclenchement . Et apparemment on ne peut pas arrêter une tache quiest bloquée sur un trigger ...
    Donc ma question est simple :
    Comment faire pour stopper un trigger ?
    j'ai un semblant de réponse avec le code suivant "F_stopperTrigger (true)":
    * stopper la tache  CDaqmxTask
    * stopper le trigger 
    * relancer la tache
    mais cela ne semble pas fonctionner , j'ai parfois toujours l'erreur -200284  ...
    Quelqu'un a-t-il une idée car là je sèche depuis un bon moment.
    Merci.
     je joins le code source des classes pour infos.
    Attachments:
    pb_stop_trigger.txt ‏16 KB

  • Howto stop the application module from using a DB

    Hello,
    Maybe and unusual question, but is there a way to stop the application module from connect to a DB? I know its purpose is to do so. But currently we are using ‘stub’ views and entities.
    In the executequery and dodml we wrote our own code to access data from webservices.
    We did this because we are also using JHeadStart which requires BC.
    It all works fine, but the application module needs a valid connection to a DB, although it will never query anything there.
    So is there a method which I can overwrite to make the application module think its connected to the DB but it actually isn’t?
    A second problem is most likely its state table.
    Anton

    Example #96 on my blog does this. It might have some useful clues.

  • Stop Navigating from Basicdata1 tab to Basic data2 tab in MM01/MM02

    HI,
    In MM01/MM02 after giving the 1st screen details and selecting basic data1 and basic data2 .
    And navigating to the second screen there in Material Grp field is not a mandatory and if user does not provide any MATGRP it can navigate to the Basic data2 tab.
    But now reqmt is to check the material grp is blank or old matrieal grp is entered. If user provides an old materila grp or blank in the field it should not navigate the user from Basic data1 to Basic data2 and should prompt an error.
    Could anyone help me in achieveing  this functioanlity.
    Thanks.

    Closed.

  • Howto stop a subvi

    Hi,
    I have a question, I am running a SubVI within a control VI (kind of wizard like with subpanels) and I want to use an abort button in the main VI to stop the SubVI thats still running (just like the stop button within labview (next to run and loop)) Can someone help me...
    thnx
    Bart bakels
    Labview CLD , Engineer/Manager
    Promedes and DSM
    using LV 7.1, 8.0, 8.2, 8.5 and 2009 SP1
    http://www.promedes.nl

    BartB wrote:
    Hi,
    I have a question, I am running a SubVI within a control VI (kind of wizard like with subpanels) and I want to use an abort button in the main VI to stop the SubVI thats still running (just like the stop button within labview (next to run and loop)) Can someone help me...
    thnx
    Bart bakels
    Are you saying that you want to use LabVIEW "Abort" button to stop a VI? If so, instead of using the LabVIEW "Abort" button you use a while loop controlled by a boolean button. then when the user presses the stop button execution of your top level VI will stop. Also, you can use a Global Variable to pass the value of the boolean button to your subvi. Then when the user clicks on the boolean button, the value change will be seen by the top level VI and subVI.
    You should not use the LabVIEW "Abort" button to stop execution of a program. The "Abort" button is intended to be used for development purposes.
    See the attached example and run "Global Variable-Top Level VI.vi"
    Chad
    Attachments:
    Global Variable-example.zip ‏26 KB

  • JTable, stopping navigation into hidden columns?

    Hello,
    In JTable I have done .setPreferedWidth(0) along with every other width setting =0; I did this to hide columns which are necessary but uninformative to the user like primary key ids. The problem is that you can still hit tab, shift-tab, and right arrow which will put the "focus" in the hidden columns, effectively 'losing' the cursor for the user.
    How do I fix this?
    I've tried using focusLost listeners but they don't fire every time I need. When a user starts editing a cell by arrow-keying over then just typing (never double clicking), then subsequently exiting the cell using the tab key or right arrow, I don't get the event to fire.
    I've also tried a KeyListener, but this doesn't work every time I'd expect.
    Any help would be greatly appreciated!!!

    There is a way to make the navigation keys skip the column with a width of zero, but the real question is how badly do you want to get it done? If you want it bad enough, then I suggest you override JTable's processKeyBinding method and for every navigation key (up, down, left, right, tab, shift-tab, home, end, etc., etc., etc.) check to see if it lands on such a column, if so manually move to the non-zero column in the direction of the key -- otherwise, let JTable's own processKeyBinding method consume the event.
    ;o)
    V.V.
    PS: If you are one of those people who don't like to go down to the low level, you can add as many InputMap/ActionMap to take care of these keys.

  • Howto stop ipad refreshing apps each time shifting the app to background

    IIpad 2 16 gb , 3G.
    application in the background are always refresh and start from zero if you left it for seconds and shift to another application, specially safari and a lot of other apps.
    how to stop this.

    This has been happening to me also since I hooked up Apple TV for the first time yesterday. My iPad gets two bars of wifi strength in our living room, which is fine for surfing but evidently not good enough for Pandora. When I bring the iPad 40 feet away to the router in my office, it gets all 3 bars of wifi strength and works perfectly.
    I think what is happening is that the less than full strength signal confuses the ipad when it is in Airplay mode, and then the iPad drops out of Airplay and defaults to it's local speakers. This is a drag, and so now I'm debating whether to buy the Apple Airport Extreme router, which everybody raves about for it's long range and powerful signal. My Linksys is not very impressive, and I've already spent too many fruitless hours with their tech support people tweaking the settings to no avail.
    It is surprising that two out of three bars is not adequate to ensure good Pandora streaming performance, so I have no way of knowing if moving to a better router will dove the problem.

  • Nokia Drive+ Beta: Stops navigating without warnin...

    My Lumia 822 is rock solid and the Windows 8 Phone platform trumps my Android and BlackBerry experiences by far.  That said, the Nokia Drive+ Beta app has providing some frustration, although I do expect some of that with a beta app.  I connect to Bluetooth in in the vehicle, plug in a destination, set the phone in the console, and we're off to the races.  Unfortunately, several times now, after receiving multiple prompts and heading into my trip, I will notice it has been longer than expected since I've received a voice prompt.  I pick up the phone, only to find that the Drive+ app has ended navigation without warning and dropped back to the main screen where the app simply shows your location on the map, but is not actually navigating at all.  Thankfully, I haven't gone too far out of my way yet, but I have missed a few exits and wasted some time.
    Is anyone else experiencing this, and is there a fix in the works?

    @pluciorx
    Not feasible due to Microsoft OS restriction where only media or application .XAP can be placed upon memory card, whereas map data goes behind protected partition upon phone memory.
    Happy to have helped forum with a Support Ratio = 42.5

  • ADF Faces - how do stop table navigation?

    im have <af:table with rangeChangeListener="#{ResPage.RangeChL}" on JSF page
    in RangeChL im check on last rows in ResultSet:
    if(sr.rs.isLast())
    System.out.println("%%%%%%%%AbortProcessingException");
    // throw new AbortProcessingException("EEEENNNNDDDD!!!");
    is record is last - im generate new AbortProcessingException.
    But it dont stop table from switch on next range.
    where I was wrong? why its dont work?

    Im also try generate
    System.out.println("%%%%%%%%AbortProcessingException");
    sr.rs.previous();
    sr.rs.previous();
    throw new AbortProcessingException("EEEENNNNDDDD!!!");
    in rangeChangeListener without condition - on each change. But it dont stop navigation on table ...

  • HOW DO YOU STOP THE ANNOYING SOUND THAT HAPPENS EVERY TIME YOU OPEN A NEW WEBPAGE?

    Every time I open a new page with Firefox I get an annoying click sound. I have gone into sounds> program events>clicked on none for Start and Stop Navigation but the sound continues. Operating System used Windows XP.
    Thanks in advance for your help,
    Regards,
    David Parker

    hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, then an addon (like noscript or autofill) is causing this - you'll have to change that in the extension's preferences...
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Maybe you are looking for