HP 8610 AND MAC OS X 10.4.11 COMPATIBLE?

Check whether or not your system supports 10.6.
http://store.hp.com/webapp/wcs/stores/servlet/us/en/pdp/printers/officejet-pro-8 610-e-all-in-one-a7f64a-b1h?jumpid=re_r11662_redirect_ETR&ts=20150123223820_33qh kvhsfWpe&HP-Officejet-Pro-8610-e-All-in-One-Printer
I do not see the printer listed here.
http://gimp-print.sourceforge.net/p_Supported_Printers.php
http://gimp-print.sourceforge.net/MacOSX.php
I have the Cannon pixma mg3120 works fine for me with mac os x 10.4.11. I am able to refill the color ink jet cartridge. Press reset + color copy button for 10 seconds.
Mac OS® X v10.4.11 to v10.6.x
http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all _in_one_inkjet_printers/pixma_mg3120

Similar Messages

Canoscan 9000f and Mac OS.10.8.2 not compatible. Driver not found on either canon us or uk sites.

Canoscan 9000f and Mac OSX 10.8.2 not compatible. Install CD gives error. It said when I bought it it would work on Mac OSX 10.8. Searched for drivers on both Canon US and UK sites. Not found. What to do? Thank you.

Hi Aleksandra, Drivers for 10.8 are on the website. Here are the basic steps to navigate to the downloads:
1. Visit Canon's web site at:
http://www.canontechsupport.com
2. Click on SUPPORT & DRIVERS. On the Support & Drivers page, select your model in the following manner:
     a. From the first menu, select SCANNERS.
     b. From the second menu, select CANOSCAN Series.
     c. From the third menu, click DRIVERS & SOFTWARE under your model.
3. Select Windows or Macintosh as needed using the drop down menu SELECT OPERATING SYSTEM.
4. Select your specific version of Windows or Macintosh using the drop down menu SELECT OS VERSION.
5. Click on DRIVERS.
6. Click on the file you need.
7. Instructions for completing the download and installation will appear on the page that follows. You will also see a disclaimer at the bottom. Review the disclaimer, and click I AGREE - BEGIN DOWNLOAD.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HP 2600n and Mac OS X 10.2.8: Compatible?

According to the HP website they are indeed compatible. Unfortunately, I can't confirm that. I've downloaded the drivers from HP's site and I can't install them. I get the same Error 95, unable to mount drive error every time. Any ideas are greatly appreciated as always. I am trying to print to the HP Color Laserjet 2600n using an IP address. Thanks so much.

I have the same problem.
Downloaded the HP2600n MAC drivers and unpacked the installer (it says complete, it doesn't tell me of course where the files have been unpacked too???). Then when I go to install the printer via TCP/IPP (Or IPP as MACs call it) the 2600n doesn't appear in the list.
There is a plethora of other printers and printer drivers, but not the one i require.
Any help would be appreciated.

I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. There are no page sizes, paper types, appearsto be locked on a 13x19 size but It.

Hi to the Mac Folks,
I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. This is regardless of either printer selected.
I primarily print photos from Photoshop CS5. The term Page Set-up has gone missing in the file pull down menu. Can't make any choices There are no page sizes, paper types, appearsto be locked on a 13x19 size paper format. Either being too large or too small.
Saw a 2008 locked issue about this however none of the help fit my situation, options discussed are not available to me.
Preview has no "Page Setup" - or does it?
Does the constant struggle with computer compatability weirdness issues ever end or is it a enslavement scheme?
Woody

Hey,
if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders. You can then navigate all the contents as normal.
HTH,
S.

Hp printer 8610 and 8620- automatic duplex scan

Hi. I would like to ask if hp officejet 8610 and 8620 can perform automatic duplex scan?
I know that 8600 can do it but not sure about this.

Hi Can you please let me know what operating system and which version you have, Mac or Windows? I would like to install the software on the same operating system so that I can use the software and find the option. I will then be able to send you a screenshot to help you navigate to the correct setting.

Can't Get MacBook Pro and Mac Pro to Network

I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
Thanks in advance for any ideas you might have on how to fix this.

I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.

Want to use a Lacie External Hard Disk with Windows and Mac? Can I?...

Hi, I've just purchased a Lacie Extreme D2 external hard disk, I'm looking to use it to move film clips from my Mac G5 to my Sony Vaio laptop. I'll connect the Mac using Firewire 1 and the PC using USB 1.
I understand there is an issue with setting the compaitibility of the hard disk to either Mac or Windows format but I'm wondering if I can set it to both, so it's possible to transfer these files? The hard disk is Windows and Mac compatible but does it have to be partitioned a certain way?
Any help is much appreciated.
Thanks,
Alex

Format the drive as FAT or use the Mac format (HFS Extended) and install MacDrive on the PC.

My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that are causing the problem.
I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
Kernel Extensions:
          com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
          com.rogueamoeba.InstantOn          Version: 6.0.2
          com.rogueamoeba.InstantOnCore          Version: 6.0.2
          com.Cycling74.driver.Soundflower          Version: 1.5.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
             [not loaded] com.adobe.fpsaud.plist
             [not loaded] com.adobe.SwitchBoard.plist
             [not loaded] com.bombich.ccc.plist
             [not loaded] com.dymo.pnpd.plist
             [not loaded] com.intego.BackupManagerPro.daemon.plist
             [not loaded] com.micromat.TechToolProDaemon.plist
             [not loaded] com.microsoft.office.licensing.helper.plist
             [not loaded] com.orbicule.witnessd.plist
             [not loaded] com.sierrawireless.SwitchTool.plist
             [not loaded] com.stclairsoft.AppTamerAgent.plist
             [not loaded] org.macosforge.xquartz.privileged_startx.plist
             [not loaded]          pcloudd.plist
Launch Agents:
                 [loaded] com.divx.dms.agent.plist
                 [loaded] com.divx.update.agent.plist
                 [loaded] com.epson.epw.agent.plist
                 [loaded] com.lacie.raidmonitor.daemon.plist
                 [loaded] com.lacie.safemanager.daemon.plist
                 [loaded] com.micromat.TechToolProAgent.plist
                 [loaded] com.orbicule.WitnessUserAgent.plist
                 [loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
             [not loaded]          .DS_Store
                 [loaded] com.adobe.AAM.Updater-1.0.plist
                 [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                 [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                 [loaded] com.divx.agent.postinstall.plist
                 [loaded] com.google.keystone.agent.plist
                 [loaded] com.propaganda.dejavu.dvmonitor.plist
                 [loaded] com.valvesoftware.steamclean.plist
                 [loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
          iTunesHelper
          Synergy
          TomTomHOMERunner
          Dropbox
3rd Party Preference Panes:
          Déjà Vu
          Flash Player
          Flip4Mac WMV
          GR-55
          Paragon NTFS for Mac ® OS X
          Perian
          Printopia
          TechTool Protection
          Witness

HT204291 Airplay mirroring. Macbook 2012 retina display. Unable to see desktop on television, audio works perfectly. Both OS on ATV and Mac are running latest versions

Airplay mirroring.
Macbook 2012 retina display. Unable to see desktop on television, audio works perfectly. Both OS on ATV and Mac are running latest versions.
Firewall set correctly (allow incoming...)
When I click mirroring to turn it on, teh Apple TV screen goes blank (from its home setting)
Any help appreciated.

Hi!
I figured it out! It was a firewall issue.
I use Handsoff and I checked it before i wrote here. There was no "user defined rule" that denied the communication but when i changed to "All rules" the program displayed several rules regarding AppleTV and its IP.
So if anybody has the same problem make sure you see all rules of your firewall and get rid of the AppleTV related rules generated by the program itself. You dont need to update to the latest iOS on the AppleTV!
I hope that I can help some people with this info to fix the problem.

Flash (is it for me?), Wacom Cintiq 22HD, and Mac Mini

I have Flash as part of the CS6 Master Suite, which I purchased primarily for InDesign, Photoshop and Premiere, but as yet I haven't opened Flash. I'm hoping someone here can save me time by advising me whether Flash is suitable for my purposes. I'm not a professional, just a keen amateur, but I do want to use quality software and equipment to do the finest job I can.
Answers to a previous post in the Illustrator forum (Re: Animation – is Illustrator what I should be using?) suggested that I try Flash.
Background
I'll be using Premiere for converting my audio-visuals to HD format. Back in the 1980s I was right into three-screen slide shows. As part of the transforming, I'll be introducing a small number of video clips (hence my need for Premiere) and also short animation sequences, probably 10 seconds at most. The animation will be done by an artist friend who is keen to extend his talents into computer art. If I buy the computer (some sort of Mac), a Cintiq, load the appropriate software, and then loan it all to Steve and show him how to use it, he'll happily spend as much time as required for the animation. We're bartering: he gets to use a computer and tablet for as long as he wants, I get animation.
A typical animation might involve Steve drawing outlines at appropriate intervals, over a background, then having the software generate the in-betweens. Watercolour-style shading (i.e. not fill-type, monotone colour) would be added, probably manually for each frame, unless the tweening can competently handle watercolour-style shading. For some of Steve's doodlings on his iPad (simplified versions of what we're aiming for), check out http://www.mediafire.com/download/sj731c17co55g5w/Steve's_iPad_Work.zip
We're both new to this and recently spent an afternoon together looking at videos on Flash and the Cintiq. The combination looks like it will work for us, but I have a few questions which I'm hoping some of the experts on this forum can answer. A simple yes or no may save me hours of reading documentation only to find out that something won't work as I want. I'll also include some questions about the Cintiq and Mac Mini in case someone who uses them with Flash can provide answers. I live in a place where I have no access to these devices before I buy. I have to buy 'cold'. Thus my wariness.
Please note: I'm not an artist and Steve isn't computer literate. So some of these questions might appear pretty dumb to an experienced user of Flash/Cintiq.
Ques 1
Is Synfig Studio (as suggested at the end of my Illustrator thread) something I should consider? Or is Flash a better bet?
Ques 2
Does Flash have vector tools that mimic a watercolour paintbrush like in Photoshop? Or is that not possible as a vector, and such effects have to be done outside Flash and then imported as background (or other method)?
Ques 3
When a Flash animation is finished, how is it exported, for example, to Premier? Do you export as h.264?
Ques 4
It is not clear to Steve and I after viewing three Cintiq videos, how the Cintiq interfaces to Flash. Does the Cintiq know about Flash, and appropriates certain drawing tools automatically? Or do you have to tell Flash (or the Cintiq) that this button on the Cintiq now operates this tool in Flash?
Ques 5
Do Flash and Cintiq work well together – and easily?
Ques 6
Do I need a monitor to be able to use Flash with the Cintiq? Or would a Mac Mini be a suitable computer – with the Cintiq acting as monitor? Steve won't ever be using this setup as a computer. He'll be treating the Cintiq as a canvas on which to draw and paint.
Thanks in advance for any replies.

Hi Guy,
I thought I was the only one around who was old enough to have worked on wide screen multi-image slide shows!
Flash may be the right product for you and Steve. I use Flash with an Intuos 4 tablet and it works fine. What you want to do is to search the Flash forums for references to Cintiq. There may be some problems that interfere with your intended use, or it may work exactly as you want. The important element for working with any Wacom product is to be sure that you are using the latest drivers for the Wacom product.
If you choose to use a mac mini, get a new one, one that can use a lot of memory, you'll need it.
You can export Flash files to video in most any file type and compression is installed on the computer. So, if you're going to use a Mac, install Quicktime Pro and you should have everything that you need.
I have never heard of or used Synfig Studio, so I can't comment on that.
Flash's paint tools are different from Photoshop and more similar to Illustrator's. You will have all of the flexibility of the Cintiq to control painting effects, it will take some practice, but you should be able to get the effect that you're describing.
Hope this helps with your decision.

How to connect a 23" Cinema display and mac mini to an AV Receiver?

I am trying to get my 23" Cinema display and Mac Mini to a Yamaha RX-2700 AV Receiver. I am on first name terms with the guy in Maplins because I tried to get an Xbox 360 working with this display before and gave up in the end. The AV receiver has upscaling capability so I thought I'd try again. I tried connecting a HDMI - DVI adapter to the HDMI Out on the receiver and a HMDI to DVI cable from the Mac Mini to the HDMI in with a optical cable for the sound. The sound works fine but I get no display - the LED on the monitor flashes three times with a blank screen so it can't read the signal. Another option suggested was to use a VGA Converter connected to a VGA - HDMI cable but I would like to find out if that would work before going down that route?
I am looking for some advice about whether this type of configuation is possible with the 23" ACD and if so what do I need to buy to make it work? I love the quality of my ACD to avoid having to replace it with a TV to get my multi media life in order.
Many thanks

The fifth and sixth item on this page are DisplayPort male to Mini DisplayPort female "Extension cables". Under US$6 plus shipping from a reputable seller:
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10246#1024602

Im new to the iCloud and Mac in general. After experincing a hard drive crash out of the blue, I lost everything. I want to make sure this doesn't happen again. I show backups for my iPhone and my daughter's iPod but my mac doesn't exist. How do I fix tho

I'm new to the iCloud and Mac in general. After experiencing a hard drive that went out of the blue, I lost everything. I wanted to use the icloud to back my documents up. I went into the iCloud under settings but it only shows my iPhone and daughter's iPod. How do I get my Mac to back up too? Is there something I need to use to have the documents back up?

You cannot back up your Mac to iCloud. Even backing the whole thing up to another online service would be dubious because it would take a very long time. You should buy an external hard disk and back up to that - even better, buy two and use one to make a Time Machine backup and the other to clone your Mac from time to time, thus giving you a backup from which you can boot in an emergency.
If you wanted to back up a suitably sized selection of data to an online service there are a number of third-party methods available, some of which are examined here:
http://rfwilmut.net/missing3

Quicktime encoding using x264 encoder failing in AME 6.0.2.81 and Mac OS 10.8.2

I'm trying to encode an x264 codec Quicktime using AME 6.0.2.81 and Mac OS 10.8.2. I also tried it with two versions of the x264 encoder which I downloaded from here: http://www.macupdate.com/app/mac/24173/x264encoder
This encoder works 100% fine and better than the h264 encoder when using Apple Compressor and Apple QT Pro V7. I've been however trying to transition all of my video encodes to AME due to a number of reasons: dynamic link to AE, Premiere and the interface to name a few.
Everytime I start an encode it gives me an error and I hear that blasted sheep. lol. This is what the log displays, which is frankly probably no help to anyone.
- Encoding Time: 00:00:00
01/13/2013 04:48:10 PM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
I've also tried to specify the bitrate and have had no luck. Whether I specify the bitrate or not, I still get the error. The source video has been PNG sequences and ProRes movies at 1920x1080, 29.97fps. Both result in the same unknown error.
Any suggestions? Thanks!

I know this is pretty old now, but I thought I'd add a reply for those who are having this issue. I just had AME CC 2014 fail on me today, and this is the FIRST thing I've ever tried to render with it. I'm using a TGA sequence and exporting to an X264 codec Quicktime MOV file at 720p. I restarted a few times, repaired permissions etc. and nothing worked except for the following.
I went to:
Library/Preferences/Adobe/Adobe Media Encoder/8.0/
I deleted the entire 8.0 folder (or you could delete whatever version you are having problems with). I then restarted AME and the preferences were recreated and I could successfully use the x264 codec again. Hope this helps someone.

Multi coloured spinning cursor and mac air keeps freezing?

multi coloured spinning cursor and mac air keeps freezing?

Force Quit .
Press command + option + esc keys together at the same time for 3 seconds. Wait.
When Force Quit window appears, select the application if not already.
Press Force Quit button at the bottom of the window. Wait.
Application will quit.
http://support.apple.com/kb/HT3411
Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US

Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed

We are planning to Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed. I have tried using the AIR appliaction and it worked, But our requirement is NO INSTALL to the user machine for the silent printing. It is just from web page and silent printing to the default printer to the desktop/Laptop. Can anyone share your thoughts and experience with us. It will be very helpful..
For AIR : I tried the thread Re: AIR and PDF showing/silent printing

Hey CodeMonkey & Ross,
Did you either of you ever find a solution? I'm stuck too, it seems I can get remote printing on all these PDFs to work but it just prints a blank page since I've been using Javascript in the browser, not Adobe's (they are Engineering drawings that I do not have permission to edit so I can't just insert code into them but I need to make work instructions). I've been scouring the internet for hours now, it seems that this thread is the only relevant/useful one at this point. No one else was trying to achieve this for similar reasons to mine.
Thanks guys,
Lox

HP 8610 AND MAC OS X 10.4.11 COMPATIBLE?

Similar Messages

Maybe you are looking for