HP DM4t-2100 Screen Blank After Reassembly

I opened my laptop to fix the hinges. When I reassembled it, the screen remained blank. I've tried taking the whole thing apart again and removing the screen completely and plugging it back in, including the gold input that is behind the screen to no avail. Is there anything I can do to fix this?

bump...

Similar Messages

  • Computer HP Envy 17 Notebook PC - screen blank after bios Version F.53 update

    Computer HP Envy 17 Notebook PC -  screen blank after bios Version F.53 update
    computer cannot enter BIOS but switches on and screen remains blank.
    The power and wifi indicator shows.
    Tried removing CMOS battery with no change
    Tried removing battery, pressing on button for 40 minutes then starting again still no change

    Hi farai, welcome to the HP Forums. If your computer appears to be powering on, but you cannot see the screen it may be a recoverable situation.
    This document will help you diagnose the issue, it looks like you have already done Step 1 (hard reset):
    Computer Starts but Screen Remains Blank (Windows 8)
    If you get to Step 3, the options listed won't work since you indicated you cannot get into your BIOS. In place of Step 3 in that document, you can try to restore your BIOS using this method: Restoring the BIOS
    If you get to the end, it says to call HP. If so, it is most likely a hardware issue and you should call support for more options: HP Technical Support, North America 1-800-474-6836. For all other regions click here.
    I hope this helps. If you need any more information, let me know.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Ipad2 screen blank after ios 8 upgrade

    Screen blank, used the home and off button, still not working, a faint light comes on and nothing else
    - forced to reset factory settings, all data lost, a very upset daughter! all minecraft worlds created now gone!
    seems to be acknowledged by itunes but just get screen on ipad to work any ideas?

    Here's the list of the most annoying issues that affect me since updating my iPad 2 64GB w/Cellular iPad to IOS 8:
    EXTREMELY SLOW - When opening apps, or switching between them - We are talking just the built-in apps. Mail, Safari, Settings....
    Extremely slow Wi-Fi AND broadband. The Wi-Fi is the worst though. Horrible. Page load times are 2 to 4x slower than my wife's iPad.
    Battery life reduced by at least 25%. Used to make it all day long, now I am having to plug it in.
    Heat - It is working so hard that the processor is heating up. That can't be healthy for it, and surely the majority of the power issues stem from this.
    Copy/Paste not functioning correctly between browser windows. Oh this is frustrating. I just want to paste the URL of one website I am on to Facebook, for instance. Even though I COPY, it's pasting in info I clipped a earlier in the day to one browser tab, but if I open another one, it will paste the correct information. You never know what you are going to get.
    Cannot post a photo to facebook by hitting the camera icon when leaving a reply or making a post (using web browser version)... It starts the upload, then just stops. I *CAN* go to photos, then SHARE it to facebook, but that doesn't allow me to post a photo along with a reply.
    Multiple app crashes per day. This I can deal with. It's nothing new, it's just more frequent. Safari and Mail seem to be the major culprits. It wouldn't be so bad except it takes 2-4 seconds to reopen the crashed app. Sometimes as much as 10 seconds.
    And that's just the annoying ones....

  • Screen blank after Windows login

    When I start my computer (Win 7 32 bit on a ThinkPad T60P), I am taken to the login screen and after logging in, my screen goes black. I can still see/move my cursor but the screen is black!
    I can start in Safe Mode and Windows loads fine. I've tried updating my graphics driver from the Lenovo site (last update was 2008, so that shouldn't be the issue) - I also attempted to use a previous restore point, although the only point was 24 hrs prior which didn't rectify issue.
    I can use Ctrl-Alt-Del and go go task manager, etc - I've tried ending explorer.exe and reloading ... still nothing, still black with my mouse cursor.
    Any recommendations, please??

    'evening.
    You may want to have a careful look at this write-up detailing the use of SFC (MS Windows System File Checker):
    http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html
    I've never had to use SFC, personally, so my knowledge is limited to what I've read of it, but it looks like it can be run in "verify-only" mode. Might be best to try that first to see if it reports anything. Then, you could consider taking a backup before letting the utility modify/fix anything.
    Hope this helps a bit.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • 13" MBA screen blank after waking from sleep

    I got a MBA very recently and noticed that if I shut the top and soon reopen it, the screen is totally blank except for the cursor.  Clicking and pressing keyboard buttons doesn't help bring me to the login screen.  Eventually the screen goes black and then goes to login if I click or press a button.  I already took it to the store and after close to 4 hours (they were extremely behind....5th ave store from 1230 -4 am!!) and resetting the laptop I was told to call apple care.  I called and after a while he told me I have to send it in for repair.  Does any one else experience this blank screen with a cursor after waking?
    Ps  some want to blame chrome. My feeling was that if there's no known issue with chrome currently, there's no reason I should refrain from using it.

    This happens every so often to my 12" Aluminium PowerBook after sleeping (black screen, hard drive spinning away) and after trying every possible key combination and nothing helping, I'm usually left with the usual last resort, which is a hard restart. Of course that remedies the problem short term but unfortunately, only until the next time it happens. For me, it has been an issue since I bought it and is not affected by the OS.
    I am wondering if it has anything to do with the clasp not working properly when the lid is closed. Sometimes I get the sleeping light, sometimes not - unless I play with the lid until it clicks shut. Then the light appears. Importantly, when the sleeping light appears, the machine always wakes properly with the lid opening. But I have noticed that when the light does not come on and I haven't bothered to shut it down properly, that is when the problem occurs. Which makes me wonder if rather than going into sleep mode it is actually going into hibernation mode due to non use? I haven't a clue but perhaps someone here knows far more about such things than myself?

  • Screen blank after apple logo

    i have an iphone 4s. updated my phone to the new ios 7.0.4 and after the apple logo the screen goes black and is unresponsive. when i switch the vibrate button the phone vibrates. when i first turn it on the apple logo comes on the screen so i dont think its the LCD although i could be wrong. does anyone have any advice?

    it's definitely not the battery problem. i charged my ipod overnight and the battery indicator is full when i access the disk mode only. it's just the blank screen after the apple logo when i reset my ipod no many times is what bothers me. do you think it's time to throw my ipod away?

  • MacBook Pro Shuts off (or at least screen blank) after about 30 seconds

    Hi,
    I have a MacBook Pro. (don't know what model, OS is 10.9.5). Starting today, it will not stay on. The power light (white light at slit on front right) is not on any longer. The battery has a full charge (100%). I can turn the laptop on with the power button, it stays on for about 30-60 seconds. I can log on, work on applications, but within 30-60 seconds the screen is blank again. The tiny white line light (next to longer slit) goes on while restarting.I can shut down and restart all day long, but it won't stay on.
    Again, the bigger slit in the front is ALWAYS dark now (I believe it should always be white if laptop is on and awake, etc.
    I would be grateful for any ideas how to address. Thank you.

    Migg7 wrote:
    Would my time machine data be preserved with this?
    Well this is the big gamble. You really don't know for sure.
    TimeMachine has gotten corrupted from a failing original drive and then unable to restore properly to a new drive.
    It's not like you can access the files on a TM drive directly and cherry pick what you need and leave the rest. It's all or nothing.
    If you go erasing your only other copy on the boot drive, which the files still could be accessed from another boot drive, and if you find out the TimeMachine drive can't restore, then your up the creek without a paddle right?
    So if your able, create a data recovery drive and try to rescue your second copy of the files on the boot drive or restore the TM drive to the second boot drive , so this way your files can be accessed directly if you need it and you have two copies again.
    Once you can direclty access your files then you can go about erasing and installing on the internal boot drive.

  • NOKIA X2 SCREEN BLANKED AFTER UPDATE

    YOMORROW I HAVE UPDATED MY NOKIA X2 AFTER UPDATE IT TAKE A RESTART BUT WHEN IT START ONLY NOKIA APPEARES ON SCREEN SINCE 8 HOURS.  IS ANYBODY COULD HELP ME/ THANKS IN ADVANCE

    Remove the Battery for a couple of minutes, insert and see if the phone starts fine. Else, you may need to use the Nokia Software Recovery Tool to fresh install the OS at the expense of losing all your data ..

  • Screen blanking after upgrading to OSX10.9.2

    After upgrading to OSX10.9.2  the monitor will randomlly go black.  This never happend prior to upgrading to OSX10.9.2.   Is there a permanant fix or a way I can go back to the previous version OF OSX?

    Recover the backup you made before installing 10.9.2.
    If you didn't backup, you should have.
    https://discussions.apple.com/docs/DOC-1992

  • Satellite L350 - Screen blank after switching on

    *HELP*
    Only bought this at the weekend, got it all set up and everything was working fine. Switched everything off and then came back couple of hours later powered-on and now cannot get anything on the screen at all, totally black.
    I've tried the FN+F5 and this does nothing. Any thoughts?
    I'm a total novice so keep this in mind when responding. Many thanks.

    Hey
    Can you see a picture on external monitor? Maybe the FL inverter of your internal screen is faulty and must be replaced
    If you cant see a picture on external monitor too it seems to be a hardware malfunction. You should go to an authorized service provider and ask for help. The technicians can check the notebook for you.
    http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider

  • Yoga 2 Pro - Screen Flickering and Screen Blanking

    Hi,
    I love the Yoga 2 Pro. But i have fews issues with it. Especially when used on battery.
    My screen flicker from time to time. The onyl fix i found was to close the lid to put the laptop to sleep and the reopen it. Not very convinient.
    An other issue I encounter is the screen blanking after a while when the computer is not in use. It's like the computer blank the screen to save battery power, but when you want to reuse it again, it won't start again. THe only fix is to hard reset the computer (eg : press 10s the power button)
    I am running a fresh clean install of Windows 8.1 Pro with all the Lenovo Drivers up to date (exept the BIOS one)
    If you could help me fix my issues. I think it's software related.
    Do you think i should put the BIOS update ? Does anybody ever try with a clean windows 8.1 install ?
    Thanks a lot,
    Romain

    I have the same issue, only it occurs at low brightness.
    It flickers rapidly for a few seconds and goes away. It occasionally comes back, making it unable to work in darker environments with the rapid flickers.
    I've checked all the auto-brightness and intel power saving options. I tried using both refresh rates, and they don't make a difference. The problem occurs in all power plans and even in the non-Lenovo energy manger modes. All drivers and BIOS are up to date.
    I'm at a complete loss as to why this is happening...I would greatly appreciate a solution. I sincerely hope I don't have a defective laptop..):

  • Lightroom cc screen blanks while editing

    Just trialling LR CC and I find that using editing tools like the adjustment brush, that the screen blanks after each application of the brush and sometimes the adjustment doesn't happen.
    I never experienced this with 5.7
    My system is OS X 10.10.3 on Mac Pro early 2009 8 cores 24 GB Ram ATI Radeon 5870
    This issue makes LR CC unusable for me.

    Matt,
    After posting, I quit LR CC and went back to 5.7; then to answer your query, I relaunched LR CC and tried the same things I had done before. I am happy to report that this time there was no problem and the tools behaved as normal with no screen blanking. This is the case both with the GPU on and off. Seems to have been a glitch that the relaunch cured. I'll follow up if it occurs again.
    Chris

  • Help: S10 screen blank every 5 mins

    Need Help: My S10 running XP home.
    The power schemes in power option is grayed out. unable to change the "Turn off monitor" setting.
    screen blank after 5 mins watching video. 
    Thanks and Regards

    This caught me out as well. Click on the "Energy Managment" icon on lower right hand corner of task bar - its to the left of the icon for the mouse pad.
    The 4th option so in-aptly named "Super Energy Saver" is the one that allows you to configure each parameter.
    For video watching:
    Select tab labeled "Monitor" - then under the "Pugged In" and "Running on batteries" area change "Turn off monitor" to "Never" mine was defaulted to 10 mins to start with.
    Also under System tab I also changed all of the Standby, Hibernate and Turn off hard disk options to "Never" as I mostly watch Video with the S10 connected up to my 42 inch Plasma TV with the power on all of the time.
    Be sure to check the "Advanced Setting" tab as well and ensure your sound card is on, also if like me you are streaming video make sure your Wireless LAN card or LAN card is on.
    Enjoy!
    Regards JohnB

  • Console does not comes back to life after screen blanking

    edited post on 2014-07-13:
    This problem has nothing to do with suspend-to-RAM and/or suspend-to-disk (hibernate).
    It is a screen blanking on the console triggered by a timeout in the kernel.
    It can be modified (or disabled) with the setterm command for the current session.
    The issue is still unresolved since the console doesn't comes back to life after hitting a key.
    See post#6 on 2014-07-13 for further details.
    Changed title accordingly.
    original post on 2014-07-09 titled "blank screen on resume after suspend but screen OK after hibernation" follows:
    Dell Inspiron 9400 (aka E1705) with Radeon X1400 (RV515) (confirmed by dmesg: loading R500 microcode)
    - arch x86_64 fully updated up to 07-JULY-2014
    - xf86-video-ati open source driver installed
    - no (additional; ie: explicitly) installed power management packages such as pm-utils
    - no X installed
    The problem:
    • hibernation works fine; ie: by closing (and waiting a few seconds) and re-opening the lid
    • however resume after suspend isn't working; ie: by pressing any key to resume ... it seems the screen never comes back to life
    After suspend activates (and after I hit a key to activate resume) I see no activity at all (blank screen) but ... if I type some commands (eg: timedatectl etc) and then I close the lid to activate the hibernation sequence re-opening the lid (say, a minute later) the machine comes back from hibernation as expected and I can see the commands (and output) I typed when the screen was blank so ... it seems to me either:
    • the backlight state is not restored on the resume sequence (first thought)
    • the machine shuts down the screen after (a 10 minute) timeout but never activates the suspend sequence (and will never activate resume then) (second thought while reading dmesg output)
    This problem was present on this laptop since my first (and subsequent) arch installations so it seems is not kernel/driver specific since I did many pacman --sysupgrades in between while learning arch.
    The testing sequence (with related entries on included dmesg output):
    - typed timedatectl ... showing 23.29.04
    - now allowing idle time for the machine to suspend
    - suspend starts at 23.39 (ie: after 10 minutes) ... tag it as event1#1
    - after 30 seconds resuming with the space key and after a few seconds typing (blindly) timedatectl ... tag it as event1#2
    - after 60 seconds closing the lid allowing time for hibernation ... tag it as event2#1
    - after 30 seconds opening the lid ... tag it as event2#2
    - now I can see the output for timedatectl (typed blindly on event1#2) and it shows 23.40.11
    As you can see in attached dmesg output (at the bottom of this post) there are (to me) no evident entries for event1#2 (resuming after suspend):
    ... event#1-1 ... suspend starts here:
    [Mon Jul 7 23:40:12 2014] perf interrupt took too long (2504 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
    ... event#1-2 ... resume from suspend should show some entries here:
    no entries at all
    And the next entry after entering the suspend sequence is the starting of the hibernation sequence (when closing the lid):
    ... event#2-1 ... hibernation starts here:
    [Mon Jul 7 23:41:30 2014] PM: Syncing filesystems ... done.
    [Mon Jul 7 23:41:30 2014] smpboot: CPU 1 is now offline
    ... event#2-2 ... coming back from hibernation (I think) starts here:
    [Mon Jul 7 23:41:30 2014] ACPI: Low-level resume complete
    [Mon Jul 7 23:41:31 2014] Restarting tasks ... done.
    [Mon Jul 7 23:41:31 2014] video LNXVIDEO:00: Restoring backlight state
    So the machine shuts off the screen (and/or backlight) but never enters suspend mode because "restoring backlight state" appears once and should appear twice in my testing.
    Why isn't working then ?
    Because the signal to enter suspend mode is never sent/received by the OS ?
    Which brings me to a key question: is the acpi package (which it is not installed) (or something like that) required for such signaling ?
    In the following post a user claims a similar problem but he can see some activity (after resuming from suspend) by directing a bright light to the screen so the problem there seems to be the backlight not powered up again: it is not my case, when I did the same I saw no activity at all.
    https://bbs.archlinux.org/viewtopic.php?id=183580
    Following is full dmesg output (edited with a couple of lines inserted to keep track of mentioned events):
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpuset
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpu
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpuacct
    [Mon Jul 7 22:52:56 2014] Linux version 3.15.3-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jul 1 07:32:45 CEST 2014
    [Mon Jul 7 22:52:56 2014] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2918bbe1-e489-42fb-ad36-d70217125c5a rw quiet
    [Mon Jul 7 22:52:56 2014] e820: BIOS-provided physical RAM map:
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x0000000000100000-0x000000007fed33ff] usable
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x000000007fed3400-0x000000007fffffff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000f0000000-0x00000000f4006fff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000f4008000-0x00000000f400bfff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
    [Mon Jul 7 22:52:56 2014] NX (Execute Disable) protection: active
    [Mon Jul 7 22:52:56 2014] SMBIOS 2.4 present.
    [Mon Jul 7 22:52:56 2014] DMI: Dell Inc. MP061 /0YD479, BIOS A10 08/26/2009
    [Mon Jul 7 22:52:56 2014] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [Mon Jul 7 22:52:56 2014] e820: remove [mem 0x000a0000-0x000fffff] usable
    [Mon Jul 7 22:52:56 2014] No AGP bridge found
    [Mon Jul 7 22:52:56 2014] e820: last_pfn = 0x7fed3 max_arch_pfn = 0x400000000
    [Mon Jul 7 22:52:56 2014] MTRR default type: uncachable
    [Mon Jul 7 22:52:56 2014] MTRR fixed ranges enabled:
    [Mon Jul 7 22:52:56 2014] 00000-9FFFF write-back
    [Mon Jul 7 22:52:56 2014] A0000-BFFFF uncachable
    [Mon Jul 7 22:52:56 2014] C0000-CFFFF write-protect
    [Mon Jul 7 22:52:56 2014] D0000-EFFFF uncachable
    [Mon Jul 7 22:52:56 2014] F0000-FFFFF write-protect
    [Mon Jul 7 22:52:56 2014] MTRR variable ranges enabled:
    [Mon Jul 7 22:52:56 2014] 0 base 000000000 mask F80000000 write-back
    [Mon Jul 7 22:52:56 2014] 1 base 07FF00000 mask FFFF00000 uncachable
    [Mon Jul 7 22:52:56 2014] 2 disabled
    [Mon Jul 7 22:52:56 2014] 3 disabled
    [Mon Jul 7 22:52:56 2014] 4 disabled
    [Mon Jul 7 22:52:56 2014] 5 disabled
    [Mon Jul 7 22:52:56 2014] 6 disabled
    [Mon Jul 7 22:52:56 2014] 7 disabled
    [Mon Jul 7 22:52:56 2014] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [Mon Jul 7 22:52:56 2014] Scanning 1 areas for low memory corruption
    [Mon Jul 7 22:52:56 2014] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [Mon Jul 7 22:52:56 2014] [mem 0x00000000-0x000fffff] page 4k
    [Mon Jul 7 22:52:56 2014] BRK [0x01b3e000, 0x01b3efff] PGTABLE
    [Mon Jul 7 22:52:56 2014] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    [Mon Jul 7 22:52:56 2014] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
    [Mon Jul 7 22:52:56 2014] [mem 0x7fc00000-0x7fdfffff] page 2M
    [Mon Jul 7 22:52:56 2014] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
    [Mon Jul 7 22:52:56 2014] [mem 0x7c000000-0x7fbfffff] page 2M
    [Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x00100000-0x7bffffff]
    [Mon Jul 7 22:52:56 2014] [mem 0x00100000-0x001fffff] page 4k
    [Mon Jul 7 22:52:56 2014] [mem 0x00200000-0x7bffffff] page 2M
    [Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7fe00000-0x7fed2fff]
    [Mon Jul 7 22:52:56 2014] [mem 0x7fe00000-0x7fed2fff] page 4k
    [Mon Jul 7 22:52:56 2014] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [Mon Jul 7 22:52:56 2014] RAMDISK: [mem 0x3729a000-0x37944fff]
    [Mon Jul 7 22:52:56 2014] ACPI: RSDP 0x00000000000FC1B0 000014 (v00 DELL )
    [Mon Jul 7 22:52:56 2014] ACPI: RSDT 0x000000007FED39CD 000040 (v01 DELL M07 27D9081A ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: FACP 0x000000007FED4800 000074 (v01 DELL M07 27D9081A ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: DSDT 0x000000007FED5400 004841 (v01 INT430 SYSFexxx 00001001 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: FACS 0x000000007FEE3C00 000040
    [Mon Jul 7 22:52:56 2014] ACPI: HPET 0x000000007FED4F00 000038 (v01 DELL M07 00000001 ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: APIC 0x000000007FED5000 000068 (v01 DELL M07 27D9081A ASL 00000047)
    [Mon Jul 7 22:52:56 2014] ACPI: MCFG 0x000000007FED4FC0 00003E (v16 DELL M07 27D9081A ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: SLIC 0x000000007FED509C 000176 (v01 DELL M07 27D9081A ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: BOOT 0x000000007FED4BC0 000028 (v01 DELL M07 27D9081A ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED3A0D 0004DC (v01 PmRef CpuPm 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Local APIC address 0xfee00000
    [Mon Jul 7 22:52:56 2014] No NUMA configuration found
    [Mon Jul 7 22:52:56 2014] Faking a node at [mem 0x0000000000000000-0x000000007fed2fff]
    [Mon Jul 7 22:52:56 2014] Initmem setup node 0 [mem 0x00000000-0x7fed2fff]
    [Mon Jul 7 22:52:56 2014] NODE_DATA [mem 0x7fece000-0x7fed2fff]
    [Mon Jul 7 22:52:56 2014] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
    [Mon Jul 7 22:52:56 2014] Zone ranges:
    [Mon Jul 7 22:52:56 2014] DMA [mem 0x00001000-0x00ffffff]
    [Mon Jul 7 22:52:56 2014] DMA32 [mem 0x01000000-0xffffffff]
    [Mon Jul 7 22:52:56 2014] Normal empty
    [Mon Jul 7 22:52:56 2014] Movable zone start for each node
    [Mon Jul 7 22:52:56 2014] Early memory node ranges
    [Mon Jul 7 22:52:56 2014] node 0: [mem 0x00001000-0x0009efff]
    [Mon Jul 7 22:52:56 2014] node 0: [mem 0x00100000-0x7fed2fff]
    [Mon Jul 7 22:52:56 2014] On node 0 totalpages: 523889
    [Mon Jul 7 22:52:56 2014] DMA zone: 64 pages used for memmap
    [Mon Jul 7 22:52:56 2014] DMA zone: 21 pages reserved
    [Mon Jul 7 22:52:56 2014] DMA zone: 3998 pages, LIFO batch:0
    [Mon Jul 7 22:52:56 2014] DMA32 zone: 8124 pages used for memmap
    [Mon Jul 7 22:52:56 2014] DMA32 zone: 519891 pages, LIFO batch:31
    [Mon Jul 7 22:52:56 2014] ACPI: PM-Timer IO Port: 0x1008
    [Mon Jul 7 22:52:56 2014] ACPI: Local APIC address 0xfee00000
    [Mon Jul 7 22:52:56 2014] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [Mon Jul 7 22:52:56 2014] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [Mon Jul 7 22:52:56 2014] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [Mon Jul 7 22:52:56 2014] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [Mon Jul 7 22:52:56 2014] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [Mon Jul 7 22:52:56 2014] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [Mon Jul 7 22:52:56 2014] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [Mon Jul 7 22:52:56 2014] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [Mon Jul 7 22:52:56 2014] ACPI: IRQ0 used by override.
    [Mon Jul 7 22:52:56 2014] ACPI: IRQ2 used by override.
    [Mon Jul 7 22:52:56 2014] ACPI: IRQ9 used by override.
    [Mon Jul 7 22:52:56 2014] Using ACPI (MADT) for SMP configuration information
    [Mon Jul 7 22:52:56 2014] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [Mon Jul 7 22:52:56 2014] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [Mon Jul 7 22:52:56 2014] nr_irqs_gsi: 40
    [Mon Jul 7 22:52:56 2014] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [Mon Jul 7 22:52:56 2014] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
    [Mon Jul 7 22:52:56 2014] e820: [mem 0x80000000-0xefffffff] available for PCI devices
    [Mon Jul 7 22:52:56 2014] Booting paravirtualized kernel on bare hardware
    [Mon Jul 7 22:52:56 2014] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
    [Mon Jul 7 22:52:56 2014] PERCPU: Embedded 29 pages/cpu @ffff88007fc00000 s87168 r8192 d23424 u1048576
    [Mon Jul 7 22:52:56 2014] pcpu-alloc: s87168 r8192 d23424 u1048576 alloc=1*2097152
    [Mon Jul 7 22:52:56 2014] pcpu-alloc: [0] 0 1
    [Mon Jul 7 22:52:56 2014] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515680
    [Mon Jul 7 22:52:56 2014] Policy zone: DMA32
    [Mon Jul 7 22:52:56 2014] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2918bbe1-e489-42fb-ad36-d70217125c5a rw quiet
    [Mon Jul 7 22:52:56 2014] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] Checking aperture...
    [Mon Jul 7 22:52:56 2014] No AGP bridge found
    [Mon Jul 7 22:52:56 2014] Calgary: detecting Calgary via BIOS EBDA area
    [Mon Jul 7 22:52:56 2014] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [Mon Jul 7 22:52:56 2014] Memory: 2043836K/2095556K available (5224K kernel code, 886K rwdata, 1644K rodata, 1116K init, 1284K bss, 51720K reserved)
    [Mon Jul 7 22:52:56 2014] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [Mon Jul 7 22:52:56 2014] Preemptible hierarchical RCU implementation.
    [Mon Jul 7 22:52:56 2014] RCU dyntick-idle grace-period acceleration is enabled.
    [Mon Jul 7 22:52:56 2014] Dump stacks of tasks blocking RCU-preempt GP.
    [Mon Jul 7 22:52:56 2014] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
    [Mon Jul 7 22:52:56 2014] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [Mon Jul 7 22:52:56 2014] NR_IRQS:8448 nr_irqs:512 16
    [Mon Jul 7 22:52:56 2014] Console: colour dummy device 80x25
    [Mon Jul 7 22:52:56 2014] console [tty0] enabled
    [Mon Jul 7 22:52:56 2014] allocated 8388608 bytes of page_cgroup
    [Mon Jul 7 22:52:56 2014] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [Mon Jul 7 22:52:56 2014] hpet clockevent registered
    [Mon Jul 7 22:52:56 2014] tsc: Fast TSC calibration using PIT
    [Mon Jul 7 22:52:56 2014] tsc: Detected 1997.384 MHz processor
    [Mon Jul 7 22:52:56 2014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3996.21 BogoMIPS (lpj=6657946)
    [Mon Jul 7 22:52:56 2014] pid_max: default: 32768 minimum: 301
    [Mon Jul 7 22:52:56 2014] ACPI: Core revision 20140214
    [Mon Jul 7 22:52:56 2014] ACPI: All ACPI Tables successfully acquired
    [Mon Jul 7 22:52:56 2014] Security Framework initialized
    [Mon Jul 7 22:52:56 2014] Yama: becoming mindful.
    [Mon Jul 7 22:52:56 2014] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [Mon Jul 7 22:52:56 2014] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [Mon Jul 7 22:52:56 2014] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys memory
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys devices
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys freezer
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys net_cls
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys blkio
    [Mon Jul 7 22:52:56 2014] CPU: Physical Processor ID: 0
    [Mon Jul 7 22:52:56 2014] CPU: Processor Core ID: 0
    [Mon Jul 7 22:52:56 2014] mce: CPU supports 6 MCE banks
    [Mon Jul 7 22:52:56 2014] CPU0: Thermal monitoring enabled (TM2)
    [Mon Jul 7 22:52:56 2014] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
    tlb_flushall_shift: -1
    [Mon Jul 7 22:52:56 2014] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
    [Mon Jul 7 22:52:56 2014] ftrace: allocating 20226 entries in 80 pages
    [Mon Jul 7 22:52:56 2014] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [Mon Jul 7 22:52:56 2014] smpboot: CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (fam: 06, model: 0f, stepping: 06)
    [Mon Jul 7 22:52:56 2014] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
    [Mon Jul 7 22:52:56 2014] perf_event_intel: PEBS disabled due to CPU errata
    [Mon Jul 7 22:52:56 2014] ... version: 2
    [Mon Jul 7 22:52:56 2014] ... bit width: 40
    [Mon Jul 7 22:52:56 2014] ... generic registers: 2
    [Mon Jul 7 22:52:56 2014] ... value mask: 000000ffffffffff
    [Mon Jul 7 22:52:56 2014] ... max period: 000000007fffffff
    [Mon Jul 7 22:52:56 2014] ... fixed-purpose events: 3
    [Mon Jul 7 22:52:56 2014] ... event mask: 0000000700000003
    [Mon Jul 7 22:52:56 2014] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [Mon Jul 7 22:52:56 2014] x86: Booting SMP configuration:
    [Mon Jul 7 22:52:56 2014] .... node #0, CPUs: #1
    [Mon Jul 7 22:52:56 2014] TSC synchronization [CPU#0 -> CPU#1]:
    [Mon Jul 7 22:52:56 2014] Measured 3679205328 cycles TSC warp between CPUs, turning off TSC clock.
    [Mon Jul 7 22:52:56 2014] tsc: Marking TSC unstable due to check_tsc_sync_source failed
    [Mon Jul 7 22:52:56 2014] x86: Booted up 1 node, 2 CPUs
    [Mon Jul 7 22:52:56 2014] smpboot: Total of 2 processors activated (7992.43 BogoMIPS)
    [Mon Jul 7 22:52:56 2014] devtmpfs: initialized
    [Mon Jul 7 22:52:56 2014] pinctrl core: initialized pinctrl subsystem
    [Mon Jul 7 22:52:56 2014] RTC time: 1:53:00, date: 07/08/14
    [Mon Jul 7 22:52:56 2014] NET: Registered protocol family 16
    [Mon Jul 7 22:52:56 2014] cpuidle: using governor ladder
    [Mon Jul 7 22:52:56 2014] cpuidle: using governor menu
    [Mon Jul 7 22:52:56 2014] ACPI: bus type PCI registered
    [Mon Jul 7 22:52:56 2014] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [Mon Jul 7 22:52:56 2014] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [Mon Jul 7 22:52:56 2014] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [Mon Jul 7 22:52:56 2014] PCI: Using configuration type 1 for base access
    [Mon Jul 7 22:52:56 2014] dmi type 0xB1 record - unknown flag
    [Mon Jul 7 22:52:56 2014] mtrr: your CPUs had inconsistent variable MTRR settings
    [Mon Jul 7 22:52:56 2014] mtrr: probably your BIOS does not setup all CPUs.
    [Mon Jul 7 22:52:56 2014] mtrr: corrected configuration.
    [Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Module Device)
    [Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Processor Device)
    [Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(3.0 _SCP Extensions)
    [Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Processor Aggregator Device)
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED4134 000244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 000244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED3EE9 0001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 0001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED4378 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED40AF 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Interpreter enabled
    [Mon Jul 7 22:52:56 2014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
    [Mon Jul 7 22:52:56 2014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
    [Mon Jul 7 22:52:56 2014] ACPI: (supports S0 S3 S4 S5)
    [Mon Jul 7 22:52:56 2014] ACPI: Using IOAPIC for interrupt routing
    [Mon Jul 7 22:52:56 2014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [Mon Jul 7 22:52:56 2014] PCI host bridge to bus 0000:00
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [bus 00-ff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xf4007000-0xf4007fff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xf400c000-0xfebfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfed00400-0xfed1ffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xffafffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: reg 0x10: [mem 0xefffc000-0xefffffff 64bit]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: reg 0x20: [io 0xbf80-0xbf9f]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: reg 0x20: [io 0xbf60-0xbf7f]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: reg 0x20: [io 0xbf40-0xbf5f]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: reg 0x20: [io 0xbf20-0xbf3f]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80000-0xffa803ff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x10: [io 0x01f0-0x01f7]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x14: [io 0x03f4-0x03f7]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x18: [io 0x0170-0x0177]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x1c: [io 0x0374-0x0377]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x20: [io 0xbfa0-0xbfaf]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: PME# supported from D3hot
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.3: reg 0x20: [io 0x10c0-0x10df]
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: [1002:7145] type 00 class 0x030000
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x14: [io 0xee00-0xeeff]
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x18: [mem 0xefdf0000-0xefdfffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x30: [mem 0xefe00000-0xefe1ffff pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: supports D1 D2
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PCI bridge to [bus 01]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xefd00000-0xefefffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PCI bridge to [bus 0b]
    [Mon Jul 7 22:52:56 2014] acpiphp: Slot [1] registered
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PCI bridge to [bus 0c-0d]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xefa00000-0xefcfffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe01fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: [14e4:170c] type 00 class 0x020000
    [Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: reg 0x10: [mem 0xef9fe000-0xef9fffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: supports D1 D2
    [Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xef900000-0xef9fffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xf4007000-0xf4007fff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xf400c000-0xfebfffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfed00400-0xfed1ffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xffafffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
    [Mon Jul 7 22:52:56 2014] ACPI: Enabled 3 GPEs in block 00 to 1F
    [Mon Jul 7 22:52:56 2014] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [Mon Jul 7 22:52:56 2014] vgaarb: loaded
    [Mon Jul 7 22:52:56 2014] vgaarb: bridge control possible 0000:01:00.0
    [Mon Jul 7 22:52:56 2014] PCI: Using ACPI for IRQ routing
    [Mon Jul 7 22:52:56 2014] PCI: pci_cache_line_size set to 64 bytes
    [Mon Jul 7 22:52:56 2014] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
    [Mon Jul 7 22:52:56 2014] e820: reserve RAM buffer [mem 0x7fed3400-0x7fffffff]
    [Mon Jul 7 22:52:56 2014] NetLabel: Initializing
    [Mon Jul 7 22:52:56 2014] NetLabel: domain hash size = 128
    [Mon Jul 7 22:52:56 2014] NetLabel: protocols = UNLABELED CIPSOv4
    [Mon Jul 7 22:52:56 2014] NetLabel: unlabeled traffic allowed by default
    [Mon Jul 7 22:52:56 2014] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [Mon Jul 7 22:52:56 2014] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [Mon Jul 7 22:52:56 2014] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [Mon Jul 7 22:52:56 2014] Switched to clocksource hpet
    [Mon Jul 7 22:52:56 2014] pnp: PnP ACPI init
    [Mon Jul 7 22:52:56 2014] ACPI: bus type PNP registered
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x00100000-0x7fed33ff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x7fed3400-0x7fefffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x7ff00000-0x7fffffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xffa80000-0xffa83fff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4000000-0xf4003fff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4004000-0xf4004fff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4005000-0xf4005fff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4006000-0xf4006fff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4008000-0xf400bfff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:01: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] pnp 00:01: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] system 00:02: [io 0xf400-0xf4fe] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:02: [io 0x1080-0x10bf] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:02: [io 0x10c0-0x10df] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:02: [io 0x0809] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0c80-0x0cff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0910-0x091f] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0920-0x092f] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0cb0-0x0cbf] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0930-0x097f] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:08: [dma 4]
    [Mon Jul 7 22:52:56 2014] pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [Mon Jul 7 22:52:56 2014] system 00:0a: [mem 0xfed00000-0xfed003ff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:0a: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [Mon Jul 7 22:52:56 2014] pnp: PnP ACPI: found 11 devices
    [Mon Jul 7 22:52:56 2014] ACPI: bus type PNP unregistered
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PCI bridge to [bus 01]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xefd00000-0xefefffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PCI bridge to [bus 0b]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PCI bridge to [bus 0c-0d]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xefa00000-0xefcfffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe01fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: PCI bridge to [bus 03]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xef900000-0xef9fffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 8 [mem 0x80000000-0xefffffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 9 [mem 0xf4007000-0xf4007fff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 10 [mem 0xf400c000-0xfebfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 11 [mem 0xfec10000-0xfecfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 12 [mem 0xfed00400-0xfed1ffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 13 [mem 0xfee10000-0xffafffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 1 [mem 0xefd00000-0xefefffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 1 [mem 0x80000000-0x801fffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 0 [io 0xd000-0xdfff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 1 [mem 0xefa00000-0xefcfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 2 [mem 0xe0000000-0xe01fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 1 [mem 0xef900000-0xef9fffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 8 [mem 0x80000000-0xefffffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 9 [mem 0xf4007000-0xf4007fff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 10 [mem 0xf400c000-0xfebfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 11 [mem 0xfec10000-0xfecfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 12 [mem 0xfed00400-0xfed1ffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 13 [mem 0xfee10000-0xffafffff]
    [Mon Jul 7 22:52:56 2014] NET: Registered protocol family 2
    [Mon Jul 7 22:52:56 2014] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [Mon Jul 7 22:52:56 2014] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    [Mon Jul 7 22:52:56 2014] TCP: Hash tables configured (established 16384 bind 16384)
    [Mon Jul 7 22:52:56 2014] TCP: reno registered
    [Mon Jul 7 22:52:56 2014] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] NET: Registered protocol family 1
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: Boot video device
    [Mon Jul 7 22:52:56 2014] PCI: CLS 64 bytes, default 64
    [Mon Jul 7 22:52:56 2014] Unpacking initramfs...
    [Mon Jul 7 22:52:56 2014] Freeing initrd memory: 6828K (ffff88003729a000 - ffff880037945000)
    [Mon Jul 7 22:52:56 2014] Simple Boot Flag at 0x79 set to 0x1
    [Mon Jul 7 22:52:56 2014] Scanning for low memory corruption every 60 seconds
    [Mon Jul 7 22:52:56 2014] futex hash table entries: 512 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [Mon Jul 7 22:52:56 2014] zbud: loaded
    [Mon Jul 7 22:52:56 2014] VFS: Disk quotas dquot_6.5.2
    [Mon Jul 7 22:52:56 2014] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [Mon Jul 7 22:52:56 2014] msgmni has been set to 4005
    [Mon Jul 7 22:52:56 2014] Key type big_key registered
    [Mon Jul 7 22:52:56 2014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [Mon Jul 7 22:52:56 2014] io scheduler noop registered
    [Mon Jul 7 22:52:56 2014] io scheduler deadline registered
    [Mon Jul 7 22:52:56 2014] io scheduler cfq registered (default)
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:01.0: device [8086:27a1] has invalid IRQ; check vendor BIOS
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.0: device [8086:27d0] has invalid IRQ; check vendor BIOS
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.3: device [8086:27d6] has invalid IRQ; check vendor BIOS
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
    [Mon Jul 7 22:52:56 2014] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [Mon Jul 7 22:52:56 2014] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [Mon Jul 7 22:52:56 2014] vesafb: mode is 1600x1200x32, linelength=6400, pages=0
    [Mon Jul 7 22:52:56 2014] vesafb: scrolling: redraw
    [Mon Jul 7 22:52:56 2014] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [Mon Jul 7 22:52:56 2014] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004400000, using 7552k, total 7552k
    [Mon Jul 7 22:52:56 2014] Console: switching to colour frame buffer device 200x75
    [Mon Jul 7 22:52:56 2014] fb0: VESA VGA frame buffer device
    [Mon Jul 7 22:52:56 2014] intel_idle: does not run on family 6 model 15
    [Mon Jul 7 22:52:56 2014] GHES: HEST is not enabled!
    [Mon Jul 7 22:52:56 2014] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [Mon Jul 7 22:52:56 2014] Linux agpgart interface v0.103
    [Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: RTC can wake from S4
    [Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [Mon Jul 7 22:52:56 2014] ledtrig-cpu: registered to indicate activity on CPUs
    [Mon Jul 7 22:52:56 2014] TCP: cubic registered
    [Mon Jul 7 22:52:56 2014] NET: Registered protocol family 10
    [Mon Jul 7 22:52:56 2014] NET: Registered protocol family 17
    [Mon Jul 7 22:52:56 2014] registered taskstats version 1
    [Mon Jul 7 22:52:56 2014] Magic number: 6:49:862
    [Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: setting system clock to 2014-07-08 01:53:00 UTC (1404784380)
    [Mon Jul 7 22:52:56 2014] PM: Hibernation image not present or could not be loaded.
    [Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
    [Mon Jul 7 22:52:56 2014] Write protecting the kernel read-only data: 8192k
    [Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 908K (ffff88000151d000 - ffff880001600000)
    [Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
    [Mon Jul 7 22:52:56 2014] random: systemd urandom read with 1 bits of entropy available
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit local-fs.target, ignoring: Unit local-fs.target failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit swap.target, ignoring: Unit swap.target failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit systemd-journald-dev-log.socket, ignoring: Unit systemd-journald-dev-log.socket failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit timers.target, ignoring: Unit timers.target failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit paths.target, ignoring: Unit paths.target failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit slices.target, ignoring: Unit slices.target failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd-udevd[50]: starting version 214
    [Mon Jul 7 22:52:56 2014] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [Mon Jul 7 22:52:56 2014] serio: i8042 KBD port at 0x60,0x64 irq 1
    [Mon Jul 7 22:52:56 2014] serio: i8042 AUX port at 0x60,0x64 irq 12
    [Mon Jul 7 22:52:56 2014] [drm] Initialized drm 1.1.0 20060810
    [Mon Jul 7 22:52:56 2014] ACPI: bus type USB registered
    [Mon Jul 7 22:52:56 2014] usbcore: registered new interface driver usbfs
    [Mon Jul 7 22:52:56 2014] usbcore: registered new interface driver hub
    [Mon Jul 7 22:52:56 2014] usbcore: registered new device driver usb
    [Mon Jul 7 22:52:56 2014] SCSI subsystem initialized
    [Mon Jul 7 22:52:56 2014] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [Mon Jul 7 22:52:56 2014] uhci_hcd: USB Universal Host Controller Interface driver
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: detected 2 ports
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
    [Mon Jul 7 22:52:56 2014] hub 1-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 1-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: detected 2 ports
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
    [Mon Jul 7 22:52:56 2014] ehci-pci: EHCI PCI platform driver
    [Mon Jul 7 22:52:56 2014] hub 2-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 2-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: detected 2 ports
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
    [Mon Jul 7 22:52:56 2014] hub 3-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 3-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: debug port 1
    [Mon Jul 7 22:52:56 2014] [drm] radeon kernel modesetting enabled.
    [Mon Jul 7 22:52:56 2014] checking generic (d0000000 760000) vs hw (d0000000 10000000)
    [Mon Jul 7 22:52:56 2014] fb: switching to radeondrmfb from VESA VGA
    [Mon Jul 7 22:52:56 2014] Console: switching to colour dummy device 80x25
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: irq 20, io mem 0xffa80000
    [Mon Jul 7 22:52:56 2014] [drm] initializing kernel modesetting (RV515 0x1002:0x7145 0x1028:0x2002).
    [Mon Jul 7 22:52:56 2014] [drm] register mmio base: 0xEFDF0000
    [Mon Jul 7 22:52:56 2014] [drm] register mmio size: 65536
    [Mon Jul 7 22:52:56 2014] ATOM BIOS: ATI
    [Mon Jul 7 22:52:56 2014] [drm] Generation 2 PCI interface, using max accessible memory
    [Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (128M used)
    [Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
    [Mon Jul 7 22:52:56 2014] [drm] Detected VRAM RAM=256M, BAR=256M
    [Mon Jul 7 22:52:56 2014] [drm] RAM width 64bits DDR
    [Mon Jul 7 22:52:56 2014] libata version 3.00 loaded.
    [Mon Jul 7 22:52:56 2014] [TTM] Zone kernel: Available graphics memory: 1026556 kiB
    [Mon Jul 7 22:52:56 2014] [TTM] Initializing pool allocator
    [Mon Jul 7 22:52:56 2014] [TTM] Initializing DMA pool allocator
    [Mon Jul 7 22:52:56 2014] [drm] radeon: 128M of VRAM memory ready
    [Mon Jul 7 22:52:56 2014] [drm] radeon: 512M of GTT memory ready.
    [Mon Jul 7 22:52:56 2014] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [Mon Jul 7 22:52:56 2014] [drm] radeon: power management initialized
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [Mon Jul 7 22:52:56 2014] hub 4-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 4-0:1.0: 8 ports detected
    [Mon Jul 7 22:52:56 2014] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
    [Mon Jul 7 22:52:56 2014] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: WB enabled
    [Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000000 and cpu addr 0xffff8800370f4000
    [Mon Jul 7 22:52:56 2014] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [Mon Jul 7 22:52:56 2014] [drm] Driver supports precise vblank timestamp query.
    [Mon Jul 7 22:52:56 2014] [drm] radeon: irq initialized.
    [Mon Jul 7 22:52:56 2014] [drm] Loading R500 Microcode
    [Mon Jul 7 22:52:56 2014] [drm] radeon: ring at 0x0000000010001000
    [Mon Jul 7 22:52:56 2014] [drm] ring test succeeded in 10 usecs
    [Mon Jul 7 22:52:56 2014] [drm] ib test succeeded in 0 usecs
    [Mon Jul 7 22:52:56 2014] [drm] radeon atom DIG backlight initialized
    [Mon Jul 7 22:52:56 2014] [drm] Radeon Display Connectors
    [Mon Jul 7 22:52:56 2014] [drm] Connector 0:
    [Mon Jul 7 22:52:56 2014] [drm] VGA-1
    [Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [Mon Jul 7 22:52:56 2014] [drm] Encoders:
    [Mon Jul 7 22:52:56 2014] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [Mon Jul 7 22:52:56 2014] [drm] Connector 1:
    [Mon Jul 7 22:52:56 2014] [drm] LVDS-1
    [Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c
    [Mon Jul 7 22:52:56 2014] [drm] Encoders:
    [Mon Jul 7 22:52:56 2014] [drm] LCD1: INTERNAL_LVTM1
    [Mon Jul 7 22:52:56 2014] [drm] Connector 2:
    [Mon Jul 7 22:52:56 2014] [drm] SVIDEO-1
    [Mon Jul 7 22:52:56 2014] [drm] Encoders:
    [Mon Jul 7 22:52:56 2014] [drm] TV1: INTERNAL_KLDSCP_DAC2
    [Mon Jul 7 22:52:56 2014] [drm] Connector 3:
    [Mon Jul 7 22:52:56 2014] [drm] DVI-I-1
    [Mon Jul 7 22:52:56 2014] [drm] HPD1
    [Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [Mon Jul 7 22:52:56 2014] [drm] Encoders:
    [Mon Jul 7 22:52:56 2014] [drm] CRT2: INTERNAL_KLDSCP_DAC2
    [Mon Jul 7 22:52:56 2014] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
    [Mon Jul 7 22:52:56 2014] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [Mon Jul 7 22:52:56 2014] hub 1-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 1-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] hub 2-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 2-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] hub 3-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 3-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: detected 2 ports
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
    [Mon Jul 7 22:52:56 2014] hub 5-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 5-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] ata_piix 0000:00:1f.2: version 2.13
    [Mon Jul 7 22:52:56 2014] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
    [Mon Jul 7 22:52:56 2014] scsi0 : ata_piix
    [Mon Jul 7 22:52:56 2014] scsi1 : ata_piix
    [Mon Jul 7 22:52:56 2014] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
    [Mon Jul 7 22:52:56 2014] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
    [Mon Jul 7 22:52:56 2014] ata2.00: ATAPI: CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `, EDC2` `, max UDMA/33
    [Mon Jul 7 22:52:56 2014] ata1.00: ATA-7: SSDSA2SH032G1GN INTEL, 045C8860, max UDMA/133
    [Mon Jul 7 22:52:56 2014] ata1.00: 62500000 sectors, multi 8: LBA48 NCQ (depth 0/31)
    [Mon Jul 7 22:52:56 2014] ata1.00: configured for UDMA/133
    [Mon Jul 7 22:52:56 2014] scsi 0:0:0:0: Direct-Access ATA SSDSA2SH032G1GN 045C PQ: 0 ANSI: 5
    [Mon Jul 7 22:52:56 2014] ata2.00: configured for UDMA/33
    [Mon Jul 7 22:52:57 2014] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [Mon Jul 7 22:52:57 2014] hub 4-1:1.0: USB hub found
    [Mon Jul 7 22:52:57 2014] hub 4-1:1.0: 4 ports detected
    [Mon Jul 7 22:52:57 2014] [drm] fb mappable at 0xD00C0000
    [Mon Jul 7 22:52:57 2014] [drm] vram apper at 0xD0000000
    [Mon Jul 7 22:52:57 2014] [drm] size 9216000
    [Mon Jul 7 22:52:57 2014] [drm] fb depth is 24
    [Mon Jul 7 22:52:57 2014] [drm] pitch is 7680
    [Mon Jul 7 22:52:57 2014] fbcon: radeondrmfb (fb0) is primary device
    [Mon Jul 7 22:52:57 2014] Console: switching to colour frame buffer device 240x75
    [Mon Jul 7 22:52:57 2014] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [Mon Jul 7 22:52:57 2014] radeon 0000:01:00.0: registered panic notifier
    [Mon Jul 7 22:52:57 2014] [drm] Initialized radeon 2.38.0 20080528 for 0000:01:00.0 on minor 0
    [Mon Jul 7 22:53:18 2014] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    [Mon Jul 7 22:53:18 2014] scsi 1:0:0:0: CDB:
    [Mon Jul 7 22:53:18 2014] cdb[0]=0x12: 12 00 00 00 60 00
    [Mon Jul 7 22:53:18 2014] ata2.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 2 dma 96 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [Mon Jul 7 22:53:18 2014] ata2.00: status: { DRDY }
    [Mon Jul 7 22:53:23 2014] ata2: link is slow to respond, please be patient (ready=0)
    [Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] 62500000 512-byte logical blocks: (32.0 GB/29.8 GiB)
    [Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Write Protect is off
    [Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [Mon Jul 7 22:53:27 2014] sda: sda1 sda2 sda3 sda4
    [Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Attached SCSI disk
    [Mon Jul 7 22:53:28 2014] ata2: device not ready (errno=-16), forcing hardreset
    [Mon Jul 7 22:53:28 2014] ata2: soft resetting link
    [Mon Jul 7 22:53:28 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
    [Mon Jul 7 22:53:28 2014] ata2.00: revalidation failed (errno=-19)
    [Mon Jul 7 22:53:28 2014] ata2.00: limiting speed to UDMA/33:PIO3
    [Mon Jul 7 22:53:33 2014] ata2: soft resetting link
    [Mon Jul 7 22:53:33 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
    [Mon Jul 7 22:53:33 2014] ata2.00: revalidation failed (errno=-19)
    [Mon Jul 7 22:53:33 2014] ata2.00: disabled
    [Mon Jul 7 22:53:38 2014] ata2: soft resetting link
    [Mon Jul 7 22:53:38 2014] ata2.00: ATAPI: CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `, EDC2` `, max UDMA/33
    [Mon Jul 7 22:53:38 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
    [Mon Jul 7 22:53:38 2014] ata2.00: revalidation failed (errno=-19)
    [Mon Jul 7 22:53:38 2014] ata2.00: limiting speed to UDMA/33:PIO3
    [Mon Jul 7 22:53:43 2014] ata2: soft resetting link
    [Mon Jul 7 22:53:44 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
    [Mon Jul 7 22:53:44 2014] ata2.00: revalidation failed (errno=-19)
    [Mon Jul 7 22:53:44 2014] ata2.00: disabled
    [Mon Jul 7 22:53:44 2014] ata2: EH complete
    [Mon Jul 7 22:53:44 2014] scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
    [Mon Jul 7 22:53:44 2014] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [Mon Jul 7 22:53:44 2014] EXT4-fs (sda3): re-mounted. Opts: data=ordered
    [Mon Jul 7 22:53:44 2014] systemd-udevd[150]: starting version 214
    [Mon Jul 7 22:53:44 2014] ACPI: acpi_idle registered with cpuidle
    [Mon Jul 7 22:53:44 2014] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [Mon Jul 7 22:53:44 2014] ACPI: Battery Slot [BAT0] (battery present)
    [Mon Jul 7 22:53:44 2014] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    [Mon Jul 7 22:53:44 2014] ACPI: AC Adapter [AC] (on-line)
    [Mon Jul 7 22:53:44 2014] acpi device:2d: registered as cooling_device2
    [Mon Jul 7 22:53:44 2014] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2a/LNXVIDEO:00/input/input2
    [Mon Jul 7 22:53:44 2014] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
    [Mon Jul 7 22:53:44 2014] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    [Mon Jul 7 22:53:44 2014] ACPI: Lid Switch [LID]
    [Mon Jul 7 22:53:44 2014] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [Mon Jul 7 22:53:44 2014] ACPI: Power Button [PBTN]
    [Mon Jul 7 22:53:44 2014] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
    [Mon Jul 7 22:53:44 2014] ACPI: Sleep Button [SBTN]
    [Mon Jul 7 22:53:44 2014] wmi: Mapper loaded
    [Mon Jul 7 22:53:44 2014] thermal LNXTHERM:00: registered as thermal_zone0
    [Mon Jul 7 22:53:44 2014] ACPI: Thermal Zone [THM] (25 C)
    [Mon Jul 7 22:53:44 2014] intel_rng: FWH not detected
    [Mon Jul 7 22:53:44 2014] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [Mon Jul 7 22:53:44 2014] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [Mon Jul 7 22:53:44 2014] leds_ss4200: no LED devices found
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: autoconfig: line_outs=3 (0xf/0xe/0x11/0x0/0x0) type:speaker
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: mono: mono_out=0x0
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: dig-out=0x9/0x0
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: inputs:
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: Mic=0x10
    [Mon Jul 7 22:53:44 2014] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
    [Mon Jul 7 22:53:44 2014] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7
    [Mon Jul 7 22:53:44 2014] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [Mon Jul 7 22:53:44 2014] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [Mon Jul 7 22:53:44 2014] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [Mon Jul 7 22:53:44 2014] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [Mon Jul 7 22:53:44 2014] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
    [Mon Jul 7 22:53:44 2014] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
    [Mon Jul 7 22:53:44 2014] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
    [Mon Jul 7 22:53:44 2014] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
    [Mon Jul 7 22:53:44 2014] kvm: disabled by bios
    [Mon Jul 7 22:53:44 2014] input: Dell WMI hotkeys as /devices/virtual/input/input9
    [Mon Jul 7 22:53:44 2014] iTCO_vendor_support: vendor-support=0
    [Mon Jul 7 22:53:44 2014] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [Mon Jul 7 22:53:44 2014] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
    [Mon Jul 7 22:53:44 2014] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [Mon Jul 7 22:53:44 2014] gpio_ich: GPIO from 206 to 255 on gpio_ich
    [Mon Jul 7 22:53:44 2014] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
    [Mon Jul 7 22:53:44 2014] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
    [Mon Jul 7 22:53:44 2014] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:15:c5:4b:f3:24
    [Mon Jul 7 22:53:45 2014] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
    [Mon Jul 7 22:53:45 2014] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
    [Mon Jul 7 22:53:45 2014] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [Mon Jul 7 22:53:45 2014] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000/0x0, board id: 3655, fw id: 128333
    [Mon Jul 7 22:53:45 2014] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    [Mon Jul 7 22:53:45 2014] mousedev: PS/2 mouse device common for all mice
    [Mon Jul 7 22:53:46 2014] random: nonblocking pool is initialized
    [Mon Jul 7 22:53:48 2014] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
    [Mon Jul 7 22:53:48 2014] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
    [Mon Jul 7 22:53:48 2014] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [Mon Jul 7 23:11:28 2014] b44 ssb0:0 eth0: Link is down
    [Mon Jul 7 23:12:19 2014] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
    [Mon Jul 7 23:12:19 2014] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
    [Mon Jul 7 23:12:54 2014] PM: Syncing filesystems ... done.
    [Mon Jul 7 23:12:54 2014] PM: Preparing system for mem sleep
    [Mon Jul 7 23:12:55 2014] Freezing user space processes ... (elapsed 0.047 seconds) done.
    [Mon Jul 7 23:12:55 2014] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
    [Mon Jul 7 23:12:55 2014] PM: Entering mem sleep
    [Mon Jul 7 23:12:55 2014] Suspending console(s) (use no_console_suspend to debug)
    [Mon Jul 7 23:12:55 2014] b44 ssb0:0 eth0: powering down PHY
    [Mon Jul 7 23:12:55 2014] sd 0:0:0:0: [sda] Synchronizing SCSI cache
    [Mon Jul 7 23:12:55 2014] sd 0:0:0:0: [sda] Stopping disk
    [Mon Jul 7 23:12:55 2014] PM: suspend of devices complete after 393.015 msecs
    [Mon Jul 7 23:12:55 2014] PM: late suspend of devices complete after 0.713 msecs
    [Mon Jul 7 23:12:55 2014] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
    [Mon Jul 7 23:12:55 2014] PM: noirq suspend of devices complete after 15.766 msecs
    [Mon Jul 7 23:12:55 2014] ACPI: Preparing to enter system sleep state S3
    [Mon Jul 7 23:12:55 2014] PM: Saving platform NVS memory
    [Mon Jul 7 23:12:55 2014] Disabling non-boot CPUs ...
    [Mon Jul 7 23:12:55 2014] smpboot: CPU 1 is now offline
    [Mon Jul 7 23:12:55 2014] ACPI: Low-level resume complete
    [Mon Jul 7 23:12:55 2014] PM: Restoring platform NVS memory
    [Mon Jul 7 23:12:55 2014] Enabling non-boot CPUs ...
    [Mon Jul 7 23:12:55 2014] x86: Booting SMP configuration:
    [Mon Jul 7 23:12:55 2014] smpboot: Booting Node 0 Processor 1 APIC 0x1
    [Mon Jul 7 23:12:55 2014] CPU1 is up
    [Mon Jul 7 23:12:55 2014] ACPI: Waking up from system sleep state S3
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
    [Mon Jul 7 23:12:55 2014] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
    [Mon Jul 7 23:12

    I think that it is something wrong with kernel and graphic drivers but i'm not able to solve it from the beginning of using of Arch by me.
    I'm not so sure this issue is software-related only because in my case it seems the laptop screen enters power-saving mode (10-min timeout) on its own without any events logged (as shown by dmesg) so my next thought was OK, I'm going to get rid of this issue disabling the screen power-saving timeout in the BIOS and set it to never power down or something like that and from then on managing power mode manually; ie: when I want to power down I will just use systemctl suspend/hibernate which work fine ... problem is: there are no related options in my BIOS for such timeout.
    The only timeouts I have are in /etc/systemd/logind.conf set to 30min (#IdleActionSec) (commented) by default so these are not in effect because the screens goes blank after 10m which is less than the (default) 30m in logind. Maybe setting loggind to 9m (un-commented) to catch the event before the machine-default one ?
    IdleActionSec=9min
    IdleAction=suspend
    Will check it and report back.

  • Dialog box display won't update after screen blank or being moved

    I have a modeless dialog box used for status display by a plugin I wrote for Acrobat. Everything works fine until the screen blanks or the user moves the dialog box on the screen, at which point no further updates to the dialog box are displayed. My plugin consumes 100% of CPU for long periods of time so the program can appear dead without this display being updated, but nothing I have tried seems to make any difference. The dialog box is generated with ADM and things I have tried include calling "Update" on the dialog box at regular intervals, the windows "Sleep" function to yield the CPU periodically, and a host of similar tactics.
    I'm guessing all the code will get run together once I click submit, but here is how I create the diaglog box (it was working fine without the "WinAppRegisterModelessDialog", but I saw a reference to it elsewhere and tried it to see if it would help, not sure if it actually serves any useful purpose):
    statWin = sADMDialog->Create(inPluginRef, DIALOG_ID, IDB_DIALOG1, kADMModalDialogStyle, NULL, NULL, 0);
    WinAppRegisterModelessDialog((HWND)sADMDialog->GetWindowRef(statWin));
    infoBox = sADMDialog->CreateItem(statWin, 5, kADMTextStaticType, &coords, NULL, NULL, 0);
    // Status header
    coords.top = coords.bottom + 10;
    coords.bottom = coords.top + 12;
    statHeader = sADMDialog->CreateItem(statWin, kADMUniqueItemID, kADMTextStaticType, &coords, NULL, NULL, 0);
    // Status line
    coords.top = coords.bottom + 10;
    coords.bottom = coords.top + 12;
    statLine = sADMDialog->CreateItem(statWin, kADMUniqueItemID, kADMTextStaticType, &coords, NULL, NULL, 0);
    // Progress bar
    coords.top = coords.bottom + 10;
    coords.bottom = coords.top + 15;
    progress = sADMDialog->CreateItem(statWin, kADMUniqueItemID, kADMProgressBarType, &coords, NULL, NULL, 0);
    sADMItem->SetMinIntValue(progress, 0);
    sADMItem->SetMaxIntValue(progress, totalPages);
    // Set window size, and other attributes
    sADMDialog->Size(statWin, coords.right + BORDER, coords.bottom + BORDER);
    sADMDialog->SetText(statWin, PROD_NAME " - Progress");
    // Set header for status line
    sADMItem->SetText(statHeader, " Page # % Complete Estimated Time remaining");
    // Initialize progress bar
    sADMItem->Update(progress);
    Updates are currently performed with the following code segment. The last two lines are my attempts to get the display to update once the screen blanks:
    // show it
    sADMItem->SetText(statLine, textBuf);
    // Update progress bar
    sADMItem->SetIntValue(progress, pagesCompleted);
    // Force display update/refresh
    sADMDialog->Update(statWin);
    // Yield for display update (in case of screen blank or user changes)
    Sleep((DWORD)100);
    Everything works fine until the window is moved or screen blanking occurs, after that nothing seems to work, all updates to the box cease to be displayed. Any suggestions?

    OK guys here's an update. First I went to BIOS and updated the initial display setting to "LCD panel only" from "Auto". At first I thought it helped, because when I worked at the laptop without the external screen attached, the internal LCD panel resumed normally from off (previously this didn't work).
    But today while I was in the office with my external 19" LCD screen attached, and both of them went off after being idle for 10 minutes, the internal LCD panel didn't resume again. So I've tried the Fn + F5 key combination to switch between modes, and I switched from dualview back to single. The internal LCD panel blinked for a second and then turned off immediately, and from that moment on, I was without picture on both of them. SO I ended up hibernating and resuming again. :( An important note - as soon as the computer began hibernating, the LCD went on and I could see the whole progress of hibernation before it turned off.
    Also another note - when I'm in dualview, I always have keep the internal LCD panel as the primary screen. So unfortunately, when it doesn't resume, I don't have access to the taskbar etc to try more things...
    Any more thoughts?
    Thanks again!
    Rado

Maybe you are looking for