Hp dv9000(dv9​392ea) How do you change the fan speed settings

Hi 
I have now been looking for hours on how to change the fan speed settings for this laptop and all the things I have used do not work, has anyone been able to get it work or knows of away?
Please let me Know 
Thanks

If you have a higher version it should include the earlier version settings.Usually each update is a rollup of previous changes plus newer.
If you are having serious overheating problems I would use a laptop cooling pad with fan/fans. Also,a less radical approach to the mod posted above is drilling some air holes in the bottom of case where the GPU is located. Adding copper shims shown HERE  or HERE on his 'About ME' also keeps temps down.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • How do you change the fan speed (rpm)

    On a mac, how do you change the fan speed to 7200 or something?

    As was mentioned, installing smcFanControl will do this:
    http://81.169.182.62/~eidac/software/page5/page5.html
    However, as others have indicated, you should determine what the issue is.  For starters, is your machine actually running hot?  Have you run something to let you know what the actual temperatures are?  Setting the fan at max speed will make your system noisy, will reduce the fan life, and significantly reduce your battery charge.

  • How do you change the nominal range settings from 0-10v to 0-1v

    Currently using a PCI-6052E with Mac OS, how do you change the resolution accuracy? In other words from say
    0-10V full scale for an AI to 0-1V full scale?

    Here is the information that you should follow when using DAQ with a Macintosh. I'm not sure whether you are using LabVIEW or some other programming language, so the two main references that you should refer to are the NI-DAQ Software Reference Manual for Macintosh and the LabVIEW Data Acquisition VI Reference Manual. Both of these resources are excellent sources of information and will explain to you anything you need to know about programming DAQ on a Macintosh.
    The NI-DAQ Software Reference Manual for Macintosh can tell you how to configure things such as Analog Input Mode (differential, RSE, NRSE), Range, Polarity, Analog Output Range, P
    olarity, Voltage Source, etc. Even reading just the first chapters of either of the above mentioned reference manuals should have you on your way.
    Hope this helps.
    Jared A

  • How can you change the aquisition speed?

    I have a vi that gets temperature as a function of time from a thermocouple (MCC). I want the temperature to be sampled at different times not just every 5 seconds. How?
    Message Edited by nicholas03 on 10-07-2007 04:43 PM

    Hi Nicholas3,
    I just want to verify that I understand your issue correctly. You are acquiring temperature data and want to slow you acquisition down, I am assuming that you are using a thermocouple and thus are using DAQmx to read said thermocouple. If this is correct the easiest way to accomplish this is to insert a wait into the acquisition loop. The wait functions are on the Timing palette. This will hold the loop for the specified number of milliseconds before allowing it to iterate. There is an excellent shipping example titled Cont Acq Thermocouple Samples-SW Timed.vi within this example this method of holding the loop is used. as illustrated in the screen shot from the example.
    What is happening is in the while loop a call to the DAQmx Read VI is made, pulling a single temperature sample from the DAQ device into PC memory. The while loop will then wait until the user specified amount of time has elapsed before iterating and pulling the next temperature sample from the DAQ device.
    Thanks
    Message Edited by jaced on 10-08-2007 03:31 PM
    JaceD
    Signal Sources Product Support Engineer
    National Instruments
    Attachments:
    SW loop timed.jpg ‏31 KB

  • How do you change the burn speed when making a CD?

    I have tried burning my iTunes purchases onto a CD, and when I try to play them back on my CD player, nothing happens. It will play back in iTunes on the Mac, but not on my CD player or in my car.
    I suspect it has to do with the speed at which they burn, but I have no idea how to change that?

    Check your similar post
    https://discussions.apple.com/message/18603508#18603508

  • HT5312 How do you change the email address used to send security answers?

    How do you change the email used to send the security answers you have forgotten? I have changed the alternative email adress in Name, ID and Email Addresses but this does not change the email address in the Password and Security section.

    Jus what do you want to accomplish? The Apple ID email address is used for variosu thing onthe iPod like:
    - For purchasing media. Srrings.iTunes and App stores. Sing out and sign into anoterh account
    - Settings>iCLoudl for iCloud account
    - Settings>FaceRome for Apple ID and where You can Be Reached At email address
    - Settings>Messages for Send And Receive email address.
    - Maybe for Game Center

  • Same question for the "2 iPhones in one account".....How do I change the name.  My iPhone is showing my wife's iPhone name when I am syncing it.  Why is that?  I know about using one iTunes account....But how do you change the name w/o erasing your data?

    Hi....How do you change the name?  When I sync my iPhone, it shows my wife's name on it?

    Unfortunately it is not doing it....
    Let me give more details..We have 3 iPods and 2 iPhone4....I recently purchased the iPhone4 and when we connected it..It was already reading my wife's iPhone4..We went to the Apple Store at the Grove today and was told to de-authorize the system and connect my iPhone4 back and I should be able to change the name.
    Nothing happened..Right now, I clicked on RESTORE settings...and it is uploading a new iPhone update. 

  • HT204053 I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

    I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

    See https://discussions.apple.com/message/19218571#19218571.

  • How do you change the Apple ID for my iPhone 4?

    How do you change the Apple ID for my iPhone 4. I am able to access my iTunes account using my new ID and password on my computer; however, my iphone has a different Apple ID and I do not have cannot access iTunes on this phone. 

    Also, if you have iCloud, you will probably also want to change the iCloud account on the phone to be yours:
    Settings>iCloud - if Account is not yours, go to the bottom and Delete Account. Then sign back on with your iCloud account info.
    Cheers,
    GB

  • How do you change the pink highlight for the present day in calendar when in week view

    How do you change the pink highlight for the present day in calendar when in week view - OSX Maverick

    the current day was light blue in ical in 10.6 but with plenty of contrast, but I recently made the bigger leap all the way to calendar in 10.9. the choice of color is terrible for reasons such as Spile1962 puts below, but also not having any way to tweak it is terrible. I'm on a bran d new imac and can barely see a difference and frankly, while I appreciate the subtlety, I still forget to look for the darker bar across the top of the current week and day. we should be able to adjust weekend and current day bg colors.
    I went into the app's package contents in hopes that they were using a tiff/png file that I could tweak on my own but couldn't find anything for them. all the icons are there, as are the bg sets for all the little pop-ups and things, but I couldn't even find a reference to a hex color in the plist file.
    send apple feedback. I just did myself, except that Calendar hasn't made the list (yet?), only iCal up to version 4.x, and Messages is still only iChat for feedback, and some others are old as well. apparently after steve died, apple's attention to these details just died with him. it's been that long since those other apps should have been relevant on their site.

  • How do you change the color of events on ICal.

    How do you changed the color of events on ICal? I was able to do this when I utilized ICal on the Snow Leopard system but can no longer do this with Lion.
    I know that I can select the Calanders list, but when I create a new "Calander" it doesn't allow me to choose a color and it doesn't show up in my list when working within an event.
    Thanks!

    Phoebe,
    Right-click on the new calendar and select "Get Info."
    Make sure that the ✓ mark is selected.
    Then choose the color from this pane:

  • How do you change the I'd on the log in screen when you want to update your apps and the I'd  is wrong

    How do you change the I'd on the log in screen when you want to update your apps and the I'd  is wrong and the password is also wrong. HELP

    Go to Settings>Store>Apple ID. Tap on the ID and sign out. Then tap on "sign in" and sign in with the correct account.

  • How do you change the default size of the print batch size for mail merge in Publisher 2010?

    I appended this question to another thread with the same topic but have not received a reply, so I'll try with a new question. Publisher 2010, when doing mail merge, will only merge and print two records at a time. How do you change the default size of
    the print batch size? This is for a 4 page document, 8 1/2 x 11, printed two sides on 11 x 17. I've tried all the suggestions that were in the other thread. The response that was marked as the answer by the moderator is incorrect and does not work. Nothing
    suggested in that thread works. A registry fix that worked for Publisher 2003 won't work because the print batch size key does not exist in the registry for Pub 2010. At least not that I can find. Printing to an XPS document doesn't work. It asks for a filename,
    prints 2 records, asks for new file name, prints 2 records, asks for new file name, and so on. The same for printing to a PDF document. Merging to a new Pub document doesn't work. When I print that job every other sheet is turned over. I.e., sheet one has
    pages 1 & 3 on top, next sheet has 3 & 4 on top, and so on. This makes it impossible to run them through the folder. The same thing happens when I print that complete merged document to XPS or PDF. I have the latest drivers installed for our printer, a Toshiba
    2500C copier/printer connected via network. What do I need to do to to change the batch size to something reasonable, like 100 records?

    It's been two weeks since I posted this question. What does it take to get an answer? I cannot believe it's being ignored, nor can I believe that someone in MS doesn't have an answer.

  • With IOS 7.0 How do you change the Color Red, that shows up on the Calendar to another color? People with certain eye problems cannot tolerate the color Red.

    How do you change the Color Red, that shows up on various points of the Calendar to another color? Persons with certain eye problems have visual irritations that can be caused by the color Red. This problem came up with the update to IOS 7.0.

    Sorry but you cant

  • HT2513 How do you change the name of a reminder in the reminder list.  I right click and then choose "get information"  I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled".

    How do you change the name of a reminder in the reminder list.  I right click and then choose "get information"  I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"

    Jerry,
    Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
    Hey presto, I've got the @ where it should be. Excellent.
    However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
    Very strange. I'll look at other keyboards and see where that gets me.
    Thanks,  Maz

Maybe you are looking for