Hp laser jet 1102 printer dosen't work on remote desktop

i have a problem on printer HP laserjet 1102 on printing on remote desktop .
my printer connected to my computer and work ok but when i open anther computer remote it appear on it but not printing
if this printer dosen't support this option what is the model you advice me
many thanks for you

Try to run the print and scan doctor and check the results.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03275041
Does it gives you an error message when you try to print from the remote desktop?
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Similar Messages

Help, Upgraded to Yosemite and now my HP Laser jet 1320 printer will not work!

Two days ago I upgraded to Yosemite on my Imac. Now my HP 1320 Laser jet will not print at all!!! I need a printer for my eBay business ASAP and this is not good. The printer is a driver version 19.8 Is it compatible with the new program? I am so frustrated.

Hello k1watt,
Thanks for using Apple Support Communities.
From your post I see that you're unable to print to your HP LaserJet 1320 series after upgrading to Yosemite on your Mac. I defintely understand how frustrating this is, especially since printing is vital to your business. The printer driver version 19.8 is the most current version available. To troubleshoot the issue however where you're unable to print, please follow the steps in the article below.
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel.Note:If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
UseSoftware Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Deletethe affected printer, thenaddthe printer again.
If the issue persists, try these additional steps:
Resetthe printing system, then add the printer again.
If the issue still persists,resetthe printing system again. Download and installyour printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Troubleshooting printer issues in OS X - Apple Support
OS X: Printer and scanner software available for download - Apple Support
Take care,
Alex H.

How do I use my HP Laser Jet 4M printer work with my OS 10.9 MacBook Pro

A "newbie" here. I am having trouble getting my new Macbook Pro and its 10.9 OS to accept my HP Laser Jet 4M+ printer. HP apparently does not support the Mac's OS10.9. Any help appreciated.

Ok, I've downloaded the drivers as suggested.but still not printing as it should.
It's now printing one page as opposed to many, but it still has the jargon on top of the page as depicted in my original post?
From this info you advised, it does suggest, does it not, that the HP Laser Jet 6p is supported.
Meanwhile, any other advice.
Regards

How do i install a hp laser jet 4l printer on windows7

how do i install a hp laser jet 4l printer on windows7 Where do I get the drivers

The driver is delivered through Windows Update as described here.
You could also use the Windows 7 driver finder tool at http://www.hp.com/go/tools.
If you do not have a parallel port on your Windows 7 machine you may need a USB-parallel converter cable. The models mentioned in the posts tagged here have been verified by users to work in Windows 7.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Mac OSx 10.8.5 and HP laser jet 2100M printer w/ driver version 19.8--Doesn't print!

I've got a macbook pro with Mac OSx 10.8.5. I've successfully printed with my HP Laser jet 2100M printer until recently. The driver version is 19.8. I don't know what changed but about a month ago the printer says "printing--connected to printer" but it never prints. What do I need to do to get my printer and my macbook to communicate again and start printing? I also have a mac mini desktop running on mac osx 10.7.5 and it doesn't talk to the HP Laser jet 2100M either (also driver 19.8.Please, can you tell me how configure so these macs will be able to print to my printer?

I have had a similar issue with my HP LaserJet 1320 printer on OS X 10.8. On certain PDF files (only those that I have tested so far), the data will send fine from the computer (and the job goes away) but the printer balks and drops the print job on its end. It's only when I save it as an image in Preview and then print will it work (advice from this forum post). However, when I updated the driver from 19.8 to 19.13 (in the Apple Software Update), it seemed to fix it. Do you know what changed between 19.8 to 19.13?

Can't print to hp laser jet 1020 printer connected to airport express

Hello All - I recently bought an airport extreme so I am doing some re-configuring of my home network but I am having issues getting the desired out come.
I have the airport extreme connected to the modem. From the extreme in another room, I have an airport express connected to the airport extreme wirelessly (I set that up through the airport utility without any problems.) Now I want to connect my usb hp laser jet 1020 printer the airport express to print from. I have a windows 7 machine. I can see the printer connected to the airport express through the airport utility. I have tried to use the bonjour print service to set up the print connection. Bonjour sees the printer connected as well, I run through all the prompts and click finish, but when I go to print something, it goes to print que and nothing happens. (side note, the printer works just fine when connected directly to the computer).
So I guess my question is, it appears the computer sees that my printer is connected to the airport express. But some point along the way, when I go to print, the message gets lost or goes to the wrong place. I am on the right track? Any other suggestions?
Thanks.

Does "plugged into it" mean that the printer is connected using USB or Ethernet?
If USB, have you run Bonjour for Windows to find and configure the printer? (Pages 16-17 in the Setup Guide)
Bonjour Print Services for Windows v2.0.2

What is the life expectancy of the hp laser jet p3015 printer?

What is the life expectancy of the hp laser jet p3015 printer?

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?
Apple has never published any life expectancy specifications for any of their routers (or desktops/laptops) that I am aware of. As a rule of thumb, I would consider two years for any consumer electronics that operates 24 x 7 to be a reasonable period. Obviously some experience more or less and it would depend on a number of factors: ambient temperature, electrical circuit stability, area prone to lightening strikes, etc.
Some telltale signs that an AirPort has (or is about to fail):
Status lights are not illuminated or do not match any of the known configurations.
Unit feels cool to the touch after power is applied even after a lengthly (15-30 minutes) period of time.
Unit refuses to intialize, even after performing multiple "factory default" resets.
Weak or no wireless signal.
Ethernet port(s) not functioning
Etc.
Also, are there any compatiility issues with newer models and G5/G4s?
Three potential issues:
Depending on the version of OS X you are running on these clients, they may not be able to support the latest AirPort Utility required to administer the latest AirPorts. OS X 10.5.7 is the minimum required.
Support for 802.11n connectivity. Most G5 or G4 Apples support 802.11g, some only 802.11b.
Support for WPA2. Not supported if the G5 or G4 is equipped with the Original AirPort Card.

HP Laserjet 1020 not working through remote desktop

I have a hp laserjet 1020 that I am vpn and remote desktop to a computer at work. I am suupose to be able to print from remote desktop to my local printer (the hp laserjet 1020) using the microsoft terminal Easy Print. The printer is showing up in the printer list, but when I try to print I get an error of Printer not ready. The printer is working fine on the local machine, just not through the remote desktop. I have install the printer drivers on the machine that I am remoting into , just to make sure. Is there anything else I can try. I am not finding any firewalls on either end blocking it?

After many months of frustration and 7 1/2 hours with Microsoft advanced prof support I've finally pinned down this printer and a slew of others. This problem as far as I have come across deals exclusively with HP printers. In simple terms: the drivers are flawed. This 1022 is a prime example. It prints locally and via TCP/IP just fine. I have about 7 other printers and dummy printers in my printer folder. Enter a remote desktop session and ALL of them populate except the 1022. This shows that the hooks and RDT finders are locating your printers and installing them properly as remote printers. All except the 1022.
Log out of your RDT session: goto the local 1022 setup and change the printer driver to a PCL driver. I used a 1200 PCL driver. Now log back into your RDT server and hockus pocus! there is your printer. Totally un-usable because the driver will not run this printer. Caveat: each time I did this XP crashed (I couldn't get to the properties TAB anymore -- I had to un-install the 1022 and then re-install it with at least 1 reboot in the process)
Moving on we go to the HP OfficeJet/LajerJet2840. Same thing. It won't pass through as remote printer in RDT. Go local. Set the printer driver to AppleLaserWriter8500 and boom. (same logout, change, back in steps) and your LJ2840 shows up and works.
While I will have to wait until tomorrow I am betting that this will fix the exact same problem with the HP Officejet 8500A all in one with the exact same problem.
Hey HP? Whats with the drivers??
Another work around if you have a static enough environment is to install your local printer that will not show up under RDT on the server, and then point the port to your fixed IP on your router, and passthru port 9100 to your locally installed printer that is failing. You can now be on RDT and chooses the network printer that is printing to the TCP address of your home (or office) router.

HP-Print-58-Laser Jet 1102

I want to be able to print wirelessly direct from my laptop to the printer. The instructions say to have a steady blue light showing but I can only get a flashing blue light.
The lap top can see the printer as an "HP Laser Jet Professional P 1102w Desktop PC" when I try to add a device, but I just get the message "That didn't work".
I have typed in the IP address into the browser window but nothing happens.
I have windows 8.1.

Try to run the print and scan doctor and check the results.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03275041
Does it gives you an error message when you try to print from the remote desktop?
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

About getting hp Laser Jet 1320 Printer Driver Softwear

Dear Team Leader,
I have lost my HP Laser Jet 1320 softwear CD. I want do download from Internet. Would you please help me by showing an easy way to get it?
Yours Ever
Mr_Shehub

Hello Bholla,
Welcome to the HP Support Forums!
I understood that you have recently installed Windows 7 again, since the LaserJet 1022n will not install. If you are getting "turn printer on" messages when the printer is on, you have to check the USB connection between printer and computer.
Have you tried to installed using the HP full feature software and drivers for this printer? If not it is a free download: HP LaserJet Full Feature Software and Driver.
Let me know if that works any better for you
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Hp Color Laser Jet 5550dn Print Quality Issues

Good Afternoon,
I have a Hp Color Laser Jet 5550dn that has some print quality issue. I've attached a black and white scan, but the color is a light blue to blue that form the blotches. On the back of the page there are blue and pink streaks.
I can print more sample pages or print them in color, but anyone have any idea what could be going on here?

We are encountering a similar problem. The streaking is coming fromt the Cyan cartridge and has continued for over a year now, despite numerous cartridge changes and replacing the transfrer case. It is progressively getting worse and I have yet to find a solution to this problem online. Any help or guidance would be appreciated.

Print Screen using new Microsoft Remote Desktop app on Mac

I am trying to figure out how to do a screen capture of a window using the new Microsoft Remote Destkop app on my MacBook Pro. I don't have a numeric keypad so the Ctrl+Alt+Minus on the keypad does not work. On the older remote desktop
client there were preferences to remap this but I cannot figure it out on the new app. And the snipping tool is great if connected to an OS that has it. Otherwise it does not help.
Thanks!
Richard

Hi,
Please check if you have the PrtScn key on your keyboard. If so, you can use this key to capture a full screen screenshot and paste it such as MS paint.
If you do not have the key, you can start the On-Scrren Keyboard to use the PrtScn Key within the remote session.
Control Panel\Ease of Access\Ease of Access Center
Hope this helps.
Jeremy Wu
TechNet Community Support

Ipad bluetooth keyboard not working with remote desktop

My clients ipad bluetooth keyboard works any other time, just not when connected to his servers via the remote desktop. PC Windows 7 Servers.
I'm trying to get the keyboard information, but any ideas?

Are you using an app like LogMeIn Ignition to access your servers? I believe that LogMeIn Ignition requires you to tap a little keyboard button near the bottom of the screen to activate use of the keyboard (that's how it works in Splashtop Remote, can't be much different in LogMeIn Ignition.)
Are you sure the app you have supports blue tooth keyboard support with remote desktop? (not sure if they have to, I just recall seeing this in Splashtop patch notes awhile ago.)
HuskieN.

Time machine is invisible but working via remote desktop - magic

Hello,
Time Machine is backing up properly an external firewire-disk of the server and the internal drive. If I run time machine on the server and restore the external volume - or internal volumes - time machine works but stays invisible. The finder window moves and resizes, the screen seems to be frozen - but it´s time machine invisibly running and I cannot see the stars and the space nor the buttons. But I can click them - I can abort time machine and get back to the finder. I also could try to find the place to click to scroll through time and change the windows´ content. I think I could also restore a file successfully but I did not try. But I cannot see time machine. It worked before I updated to 10.5.3 I think. It´s not the screen resolution in Apple Remote Desktop. And I cannot test the Macmini with a screen because it has no screen - it only is accessable via Remote desktop. It seems to me that the remote desktop client on the server does not send screen data of time machine.
What can I do?
Thank you.

Hello,
I made some more tests. I plugged a Screen adaptor for the TV at the mac mini to have a screen attached. The resolution in remote desktop was PAL and very small but time machine was working and it showed up well.
The result is that time machine needs a monitor to run properly or is it Remote Desktop that needs a monitor? The macmini is brand new and leopard server is 10.5.4.
Are there some ideas to solve this issue.
Thank you.
Best regards

Kinect application doesn't work over remote desktop but it works over TeamViewer

I have a use case where I need to use Kinect attached to a remote computer.
I tried to run an app on the remote computer via RDP but It turns out that it's not possible.
FPS drops to 0 (I get no data), for few seconds (LEDs on kinect device disappear) and then after few seconds kinect restarts to work for next few seconds (I can see LEDs on the device again). After few seconds that history repeats over and over (LEDs disappear,
I get no data from device....).
It's reproducible with all types of applications (WPF, DirectX, WinRT). I use RDP between two laptops with Windows 8.1.
However, everything is ok when I connect to the remote computer using TeamViewer.
Do you have any solution to that? If needed I'll be happy to provide you with more info on that problem.

See known issues and troubleshooting guide on remote desktop:
https://msdn.microsoft.com/en-us/library/dn758677.aspx
https://social.msdn.microsoft.com/Forums/en-US/20dbadae-dcee-406a-b66f-a182d76cea3b/troubleshooting-and-common-issues-guide?forum=kinectv2sdk
You must disable audio remoting to ensure the audio data is running through Kinect runtime on the host machine.
Carmine Sirignano - MSFT

Hp laser jet 1102 printer dosen't work on remote desktop

Similar Messages

Maybe you are looking for