HP LaserJet 3030 not detected

I have connected my HP LaserJet 3030 to my new Airport Extreme yet it is not being detected by the Airport Extreme. I have updated my drives to Gutenprint 5.2.5 to no avail. Please help.

Welcome to the discussion area!
Your HP Laserjet 3030 is not on the list of compatible printers that is published by the iFelix Support Site, but that does not necessarily mean that it won't work...it may not have been tested yet.
The best way to discover if your device is compatible is to work your way through the Apple Printer Troubleshooting Guide.
Not all printers are compatible. If the Troubleshooting Guide does not sort things out, I'm afraid that the evidence then points to your device as not being compatible.

Similar Messages

HP Color LaserJet CP1217 is not detected by PC

Hi
I have a HP Color LaserJet CP1217 which I am trying to connect by USB to a new computer running Windows 8.
When I first plugged the printer in the drivers were automatically detected and downloaded, and the printer was working.
I then moved the printer to a different PC for another printing job. Also worked fine.
When I brought the printer back to the new computer, the printing jobs were just getting stuck in the queue with an undescriptive error message.
I tried various combinations of restarting the PC, uninstalling drivers, re-installing drivers, updating drivers, turning printer on and off, using the HP print and scan doctor.
Using the HP print and scan doctor I am getting a message that the printer is not connected - though the USB cable is plugged in. I have tried different USB ports and a different USB wire but still the pc will not detect the printer.
These same cables work fine when I try the printer with another computer so it is obviously some other issue.
As the printer is more than five years old HP will not help over the phone. They recommend we buy a new one. But this one was working a few days ago!
Help please.

Hi
Yes other USB devices work (USB drive,keyboard etc).
Initially there was an error in the printing dialogue box but just said "error" with no other details.
Since un-installing drivers and re-installing, no printer is detected, only the printer driver. The printer is on and plugged in. When I go to devices and printers and run 'add printer' command it does a search and comes up with nothing.
Running windows 8.1, 64 bit.

Hp Laserjet 3030 PCL6 Printer does not want to work on windows7 x64, help!!!

Hi to all , i really need some help with this one , i have a Hp Laserjet 3030 PCL 6 all-in-one printer at work on our network and i'm struggling to get it installed , ive tried looking on the net , ive tried the windows 7 drivers with the update function
basically ive tried everything that i can think of and the thing still doesn't want to install , on my x32 bit machine it works perfectly , windows picked it up and installed it automatically and i can carry on , but for some reason the x64 doesn't want to
do anything , please anyone ho can help with this issue , it will help allot since i have been struggling for 2 weeks now

Hi Marcel,
I had the same problem - THe Hp Laserjet 3030 PCL 6 all-in-one printer is connected to a Windows XP machine and from my Windows 7 (32 and 64 bit) workstations I could not print.
By some research and trial and error configurations, I am now able to print from my Windows 7 workstations. You can follow these steps and let me know if it works for you :
Step 1 : Make sure that the printer is shared on the Windows XP workstation and you can see the printer share while browsing your network e.g : \\XPWorkStation\Printer Share
Step 2 : Click Start and go to Device and Printers. Click on Add a printer
Step 3 : Choose add a local printer (Not a network, wireless or bluetooth printer)
Step 4 : On the next screen choose create a new printer port and in the port name type in the path to your printer share e.g : \\XPWorkStation\Printer Share
Step 5 : In the driver list, select HP and your model. In some cases, the Hp Laserjet 3030 PCL 6 does not appear in the list. You will have to click on Windows Update and then you will have an updated list of the printers available. Hp Laserjet 3030 PCL
6 is not available in Windows Update list. I selected Hp Laserjet 3030 PCL 5 and the driver worked fine for me.
Regards,
Varun

Windows 8.1(64-bit) not detecting hp laserjet printer 1320

I recently replaced windows 7(64-bit) hp pc with windows 8.1 (64-bit) hp pc . Hp laserjet 1320 printer was working fine with Windows 7 but windows 8.1 is not detecting hp printer . Neither detecting in device manager nor in found new hardware wizard. As
i attach / removed USB Printer from pc a voice (dumm) comes from speaker but not show in device manager. Pls help..............

find the correct driver from HP site
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=410624&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4158%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
first thing try to update your chipset, isolate cable or port issue, and follow this instruction for basic TS regarding printer issue
http://windows.microsoft.com/en-CA/windows/printer-problems-in-windows-help#fix-printer-problems=windows-8&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
share with us what step you've done and the result

H.P. LASERJET 1213nf Mother Problem (Not Detecting)

H.P. Laserjet 1213nf
Printer Not Detecting : Problem is with the Mother Board, confirm by H.P.LaserJet Authorise Service Centre, Maha Electronics PVT. LTD. Andhra Pradesh, India.
we are ready to replace the mother board, but service centre is not supporting by saying this model is not repaired after warranty.
Tell me from whome, we have to repaired the printer, spares will not available outside. H.P. Service center they are suggesting to repaired outside.
when, H.P. dont want to give after sale service, why you are selling this printer, this is not 1 case, there are many H.P. same model printers inthe market having same problem.
H.P. is famous for there tremondous customer support, then why this printer is not servicing by H.P.
IF, we dont get the support DIRECTLY, WE ARE POSTING THE SYMTOM OF THIS MODEL PRINTER IN FACEBOOK, TWITTER, LINKIN ETC., atleast other will not face the problem.
we want immediate responce (support)
hope, we will get support from you as soon as possible.
This question was solved.
View Solution.

Hi indotech06,
If your HP Printer is no longer covered under its standard warranty or an HP Care Pack Service, you still have several options to get HP support.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=in&destPage=document&docname=c02652026&lc=en&tmp_docn...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP installer will not detect networked LaserJet MFP M1536dnf just on some PCs

Hello,
this printer/scanner was working fine (printer still works fine via a Windows print server). Then scanning (via network) stopped working on one PC (Windows 7).
Tried to uninstall drivers / HP software and reboot. Then tried to install again - HP Installer will not detect printer on the network no matter what. I can ping the IP of this printer, access its web interface without any issues on the same PC. Tried specifying IP address in the installer - does not detect, the same issue with MAC address.
Had a Windows 8 machine with drivers / software installed on it, tested - scanning still worked fine on that PC. Tried to remove HP software to see if problem will appear. And it did! I cannot install the same software package which I still had in downloads - it will NOT detect the printer on network.
Upgraded printer firmware - no change, even though I don't expect this to be a printer issue as it worked fine until I have uninstalled software on this W8 machine.
Tried using HP Scan & Print doctor. That thing doesn't see printer/scanner installed and only suggest to download and install software which is not helpfull at all.
I also tried extracting HP installation files and finding *.inf files which could be used to add scanner via Windows directly, but haven't succeded with that (I would also be not sure how to specify network IP address in such a case anyway).
Any help is MUCH appreciated. We are kind of stuck...
Thanks!

Hi,
Run some diagnostics and see if any issues are discovered.
There have been reported issues with the NVIDIA 650 with some of the HP PCs. Additionally, most models of the NVIDIA 650 require a 400 watt power supply as the minimum and some models require a PCI six (6) pin power connector which the 300 watt power supply in your PC is not provisioned.
There is a BIOS update posted for your PC so you might want to consider installing that update.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Fax not detected,Comm error, fax run test is all PASS,

Hi Good Day! Im Using a HP color Laserjet Pro MFP M177fw. The Problem is sending fax messages. I do all the updates you need to installed. but the problem with my hp fax machine is still there specially i still receive a fax not detected issue,comm.error, but when i run the fax test run..the result is all PASS. especially the active tel.line,correcrt port on fax machine,tel line current test,dial tone..all the question and are PASS. The firmware is updated like..20140914. Please help me for this kind of problem. Thank You!

Hi @ali_al , I can help you with the fax not being able to send faxes.
Check these settings on the printer:
Confirm the fax number:
Go to setup, fax setup, advanced setup, confirm fax #.
Turn off error correction:
Go to setup, service, fax service, error correction and turn if off.
Set the fax speed to medium:
Go to setup, fax setup, advanced setup, fax speed and select medium.
Turn off the private receive:
Go to setup, fax setup, advanced setup, private receive. Turn it off.
Test the fax.
I have provided a document with some steps to try to see if that will resolve the issue.
Cannot Send or Receive Faxes.
Please provide the following information so I can assist you better.
What type of connection do you have? (Analogue, DSL, Cable Modem)
Are you using the 2 wire phone cable?
Do you have distinctive ring set up on the line?
Is there any voice mail set up?
Do you have a answering machine? (Where is it connected to?)
Where is the fax cable connected to? (modem, wall jack)
Is there a phone also connected the printer?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp laserjet 3030 would print and now won't

When I plugged in the hp laserjet 3030 all-in-one to my mac mini and added a printer it worked!
Then, I found the driver CD that came with the printer so I thought I'd install the HP Director so I could scan etc.
Now the printer won't print, I used to get an error message that said something about a postscript and the number 13. I don't recall the entire message because I no longer get it, instead ...
I see in the printer que window that it is starting the job, then it just quits without anything being printed.
I've tried to unistall and install the printer multiple times. I'm not sure if I'm doing this right. I go to printer/fax preferences and remove any printers from my list. I've gone to user/library/printers and deleted any printers in that folder. I'm nervous to delete items in the mac hardrive/library/printers folder.
I've repaired disk permissions multiple times.
No luck
The strange thing is that I can use the hp director to use the scanner. The scanner works but printing won't go through.
Please, please help.
Dan

Hi Brotocol,
Thank you for your reply!
Please try the following:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. Disable antivirus software.
Disable any firewall programs. Windows Firewall from start to finish.
Create a new user account. Managing User Accounts and Logins (Windows 8).
Reinstall using the HP Printer Install Wizard for Windows.
Tips for troubleshooting wireless connection issues
The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
Make sure the router is broadcasting at 2.4 ghz and not 5 ghz.
Hope this information is helpful!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Laserjet 3050 Not Printing

I have the HP Laserjet 3050 and as soon as I click print, the printer goes into pause mode. I have removed the drivers, removed the printer from the library file, reset all printers and this problem still occurs. Is anyone else having this issue? Also will scanning ever be supported with this printer?
Thanks!

My HP Multipurpose LaserJet 3030 is working NOT similarly. Deleting the print queue, restartin, reseting the printing system, even updating HP drivers thru Software update (to 2.0) doesn't work. The best I can do is have the print queue say the printer is idle and ready. Driver version 5.3.0 is listed as working on Apple's website, interestingly, this version did NOT change after updating HP Drivers 2.0 thru SoftwareUpdate.
Every time I add a print job to the queue, the printer pauses and won't resume, clicking resume repeatidly I occasionally view a g;ajsglsdflksf USB error, but, it disappears too fast to read accurately. If I delete the print the job from the queue I can then resume the printer. That lasts until the next job is added, putting the printer permanently into "Paused" purgatory!! aka the HP PP syndrome!!

Laserjet 3030 and Officejet 7210 both 'All in One'

Both printers purchased and being used in U.S. with 110V. Am thinking about taking them with me when I move to South Africa where voltage is 220. I believe Laserjet 3030 will work with a transformer and adapter on 220V, correct? And is it possible that Officejet 7210 has dual voltage built-in (looking at product specifications, but am not sure) and therefore I will only need an adapter? Thank you for all feedback.

Hi @MacBimmer ,
I see that you are experiencing issues adding the printer over the wireless network back onto Yosemite. I will certainly do my best to help you.
Power cycle the router and restart the Mac and printer.
Follow these steps to Verify and Repair the Disk Permissions.
On the Apple menu bar, click Go, then click Utilities.
From the sub menu on the right, double-click Disk Utility .
From the list on the left, select your drive or active partition.
Click the First Aid tab, then click Verify then Repair Disk Permissions.
Restart your computer.
Reset The Printing System:
Note: This will delete all the printers listed and you will have to add them back in again.
Go to the Apple, System Preferences, Printers and Scanners, hold down the control button on the keyboard and click your mouse in the white area on the left side of the window, select Reset Printing System when it comes up and put in the Mac password. Then click the + sign, select the printer, then click on the add button. (you might have to click on the dropdown to select the printer name from the list)
If you are having network issues, then add the printer through the IP Protocal.
After clicking the + button, select the IP across the top, type in the printer's IPv4 address, select jet direct below and then Apply.
Test the printer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to fix 'Memory is low' error message on HP LaserJet 3030

I have my LaserJet 3030 connected to a PC that is accessed by other home computers on my LAN...been running without problems for years. The small window on my Laserjet has a statement 'Memory is low'...I press enter with no effect. Can anyone give advise on how to correct this problem?

Hi wbarattino and misterperov,
Please bear with me as I'm not supporting much of business printers but I found a similar article on HP Business Forums.
I also found this article (although it's a Color LJ 2600n printer) from the HP Business Support Center site.
Hope this helps both of you!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Cheers!
* If this post has helped you, the White Kudos star on the left is a great way to say thanks!
* Please mark Accept As Solution if it solves your problem so other users can benefit as well.

IPod Touch, not detected in Windows or iTunes...

First of all, hello to everyone...
i want to say that i read a lot EVERYWHERE about my issue and still i couldnt find a solution...
the problem is easy, i have a 3rd gen ipod touch, OS 4.2.1 now fully working... but, it's not detected in windows or itunes, as simple as that, and as u all have read in lots of other posts...
my ipod is now working because i took it to an apple store and they charged it in a MAC and they had no problem at all. the MAC detected the ipod, with all its content and my ipod's name...
but when i took it home -this has been hapenning since maybe... 5 MONTHS!-, i plug it in my PC and nothing happens...
ok, first of all, my spec... win vista home premium 64 bits, last version of itunes...
i tried ALL the solutions provided in APPLE official support page, and nothing happens... that means:
1- completely uninstall itunes and then reinstalling it... i ALSO FORMATED my entire hard drive twice!!!!
2- tried all USB ports and even an entirely different PC and nothing happened
3- bought 3 different IPOD to USB cables and nothing happened
4- tried setting ipod to restore, that way itunes SOMETIMES detected the ipod but i coulnt restore because of different error codes, so i had to take it several times to apple store to "unblock" it...
the only way it works -detection and charge- is with MAC computers or dock systems such as an iHome my gf has thats the way im charging it now, but otherwise it wont work...
i would really appreciate any help, since idont know what else to do!!
thx in advance!!

HI I was having some other problems getting my itouch to restore because it was not being recognized in itunes and kept erroring out. Now it has finally restored after I updated all kinds of drivers and removed and reinstalled itunes and apple software a million times,(yes this is all after installing itunes 8.1 and paying for an itouch upgrade as well) Now itunes says it cannot do anything with the ipod because it is getting an invalid response from the device. So it won't put anything back on my itouch or even show that I have plugged it in. I emailed tech support, If I find anything out I'll let you know, will you do the same for me?

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

Hard disk not detected once, but now working?

Hi,
I'm Zak, a bit of techie when it comes to playing with software, or re-assembling computers and whatnot. Unfortunately I've got no clue about some other things.
A bit of quick history on my notebook: The fan has been making terrible noises the last few weeks. Initially I thought it was some dust so I got some duster. A lot of dust came out, so that can only be good, but the noises came back after a few days. After some searching I figured the other logical explanation was probably the hard drive going bad. I'm hesitant to send it back to HP because I use it for all my university work and it would really set me back a few weeks to not have it.
So, a few days ago, I booted up my notebook to a "hard drive not detected" - or very similar - message. There were a few options, for f1-f4, they were system information, and 3 different tests (I think). I ran the tests, each one came back fine, noting that there was no OS installed, or hard disk to boot from. I rebooted because I hadn't quite seen it boot up, and wanted to see if there were any other options. Turns out, it started up fine. I restarted once more and again, it did fine.
Next, I scrambled around, backing up all my data, getting together warranty info, installing the HP Support Assistant, etc. I ran all the tests from the Support Assistant and there were no problems detected. Since then I've just been hibernating the notebook when I stop using it, and I haven't encountered any unusual trouble. It all seems fine, but my warranty expires Dec 7th of this year. Is it safe for me to assume the "hard drive not detected" error was just a single misfire? I've read a lot of threads and FAQs on it and it doesn't sound like something that just happens once and goes away. On the other hand, I've never had to use a warranty so am unsure quite how the process works, and like I said, sending it anywhere would put me back in my work.
For the sake of a full post, I have an HP G62-367DX Notebook, running on Windows 7 64-bit OS, and as far as I know there were no changes made between the error and my prior boot. If there's any other information I can provide, just let me know.
Cheers, thank you very much for any assistance, and good day
This question was solved.
View Solution.

The tests from the Assistant are not as comprehensive or reliable as the full hard drive test in the BIOS....tap F10 as you power up, go in there and find the hard drive test. Run the long form test and see what is says. It is not unusual for hard drive issues to start as intermittent and gradually get more frequent. If your drive passes the long form test you can fairly safely assume it was a one-time gremlin of some sort, but it is still a real good idea to back up. I like the idea of the online backup services and I will name Carbonite only because it is well known and not as an endorsement. There are several more and an external drive is also a good idea.
You cannot put off a reboot forever; you are going to have to confront the issue at some point.

My Iphone 5 is not detected in window 8.1

My Iphone is not detected in windows 8.1, what is the reason?

Camera roll to pc, no portable device anymore

HP LaserJet 3030 not detected

Similar Messages

Maybe you are looking for