HP Laserjet 3055 Setup issue

Dear Team,
I have HP Laserjet 3055 All in one Printer which is configured on Wireless through Print server.
My network printering is 100% OK.
But when I run HP full solution for Scanning & FAX then setup do not detect printer.
Please Help

HP please help.

Similar Messages

  • HP Laserjet 3055 printing issues

    I have a HP Laserjet 3055 which used to work fine and now won't print from my iMac. It's connected through USB directly to my iMac and I've reloaded the drivers a few times. I can scan but whenever I print, it goes to the active printing screen, then just shows up as a completed job without ever printing. If I go to HP Director, all the buttons work except for the "Maintain Device" button which brings up a "Error accessing device configuration page." when pressed. Also, the printer is hooked up to my network (through router) and all other Windows machines are able to print so it's some kind of issue with the Mac. Any help appreciated.

    I have the same problem. I've done everything. 

  • Can't install networked HP LaserJet 3055 on HP Mini

    Not a resolution issue. HP mini 1101; Windows XP home SP3. Virus protection and Firewalls off.
    HP LaserJet 3055 All-in-one is hard-wired (Ethernet) into wireless router. Mini accessing network wirelessly, and is able to see Internet and other computers on network. Successfully installed printer (using CD) on two desktop computers on the network, both running XP Pro (one wireless and one hard-wired to the router).
    Since I don't have a CD drive, I downloaded lj3050x-309x-PCL6-pnp-win-en.exe. I ran the file and installation failed. It kept telling me to make sure the printer is on and connected to the network (yes, and yes).
    I downloaded lj3050x-309x-PCL6-pd-win-en.exe and tried to manually install. Wizard can't find the printer (installing as network printer). I ask it to browse, but it only sees Microsoft Windows Network and the sub-item WORKGROUP. Instead of browsing, I type the name of the printer, but it doesn't recognize it.
    Printer's name is "Henry". I typed "HP LaserJet 3055 Series PCL 6", "Henry - HP LaserJet 3055 Series PCL 6"  (both with and without spaces and/or underscores), and the IP address of the printer... nothing.
    Is there a specific way to type the name of the printer, or a different address I'm supposed to use? Any other ideas?
    Thanks

    Hi @Memphis-Cat 
    It would help if you could post a little more detail. Can you print from NotePad? What happens when you try?
    If I understand correctly, you have the printer installed but can not print, is this correct. If you are having difficulty with the install itself, please download and run the HP Printer Install Wizard for Windows
    The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
    Also, the Print and Scan Doctor should give you the option to choose your default printer, can you please run it again and let me know the outcome?
    Please  let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
    If you see only green check marks (), the tool did not find any problems.
    If you see green wrenches (), the utility identified an issue and corrected it automatically.
    If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
    If you see a red X (), follow the on-screen instructions to resolve the issue.
    Thanks, I look forward to hearing back from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Acrobat X Pro + HP LaserJet 3055 = low contrast scans

    Hello,
    I have upgraded to Acrobat X Pro and am using it with an HP Laserjet 3055 all-in-one. My issue is that the scans of documents using grayscale are particulalry devoid of contrast, making them look faded out in the scan. Is there a way to correct this?  If I go to "PDF From scanner" then "Configure presets" there are no options to adjust contrast. I don't see any adjustements to make in "Edit" "Preferences" either.
    Does anyone have any suggestions?
    I initially had the same problem in Acrobat 9, but I was able to tweek something to correct it - but that was so long ago, I have forgotten what it was.
    thank you,
    Todd Last

    Try using  Optimization filters which have some filters to remove background (that removes the background shadows and other unwanted artifacts) and sharpen text (that makes your text look crisper and sharper).
    To access these filters, just check the option "Optimize Scanned PDF" and click on button "Options.."
    Hope that helps.
    Thanks

  • Can't see HP Laserjet 3055 with Bonjour on wireless network

    The printer is an HP Laserjet 3055 with Bonjour and is plugged into the LAN with an Ethernet cable. An eMac which is also connected to the network via Ethernet can see, print and scan without any issues whatsoever.
    All wireless computers cannot see the HP AiO which uses Bonjour. However, by manually entering the IP address in the Print Browser and using HP jet Direct - Socket, the printer is seen from the wireless computers. Using IP printing, all wireless iMacs and the MacBook Pro can print but the HP Director doe not see the printer therefore the scanning feature of the HP Laserjet 3055 are not accessed.
    iMac 20" Intels and MacBook Pro   Mac OS X (10.4.6)   HP Laserjet 3055
      Mac OS X (10.4.5)  

    Hi Chris
    This answer is rather late and you've probably sorted the problem out. At least I hope you have.
    I found your post as I was looking for anyne else with an Intel Mac who had successfully printed etc with HP Laserjet 3052/3055 as I'm about to buy these for the office. After having decided on these printers after checking that they work with Tiger I realised that I coudn't confirm on the HP website that they worked with Intels.
    So from your post I guess I now know that Intels do print with this printer, but did you ever sort out the scan function?

  • Problem getting laserjet 3055 scanner to work

    I run windows XP with service pack 3. I recently bought a second hand laserjet 3055. I downloaded the latest drivers from the hp website and it duly installed them. Printer works fine. But my scanning software will not work with the scanner. When I try pressing the scan button it says waiting for PC. Scan to button says not set up on PC. My scanning software recognises the scanner but it will not connect. Any ideas?.... Help!

    @Ironica 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Hp laserjet 3055 won't scan in windows 8

    I have a HP Laserjet 3055 All In One printer/scanner/copier/fax/cusinart and it will print on my new Lenovo desktop with Windows 8 but will not scan.  It is hooked up at the computer and the HP device by USB.  Little help for a Luddite out there?

    Thank you for the tech support and response on the community forum.  Somehow, someway after receiving my response in the forum, I got my printer installed complete with wireless function operational.  

  • HP LaserJet 3055 Will Not Duplex

    I am using an HP LaserJet 3055 AIO, printing wirelessly, and therefore (after the update of a few weeks ago), using both the HP driver (installed by CD) somewhere behind the scenes, but showing use of the Generic PostScript Printer 1.3. The Generic PS driver has the Duplex box checked, but I still cannot duplex print from any application with any configuration of printing instructions. Any ideas or suggestions?
    (At least after the latest update, I can now print envelopes!)

    I called HP. It is a known problem but there is no fix now. Apparently it works for some people and you might try manually deleting the files the driver uses, reinstalling the base leopard hp drivers, and then reinstalling the new driver from the hp web site. I haven't tried it, but it doesn't seem like it would do much. I guess I'll try it though.
    They haven't updated the drivers or firmware in a while, so I'm not sure when they will try to fix this.

  • HP Laserjet 3055 printer "waiting for printer to be available" after HP Printer Software Update 3.0

    I have an HP Laserjet 3055 All-in-One Printer. It has been printing just fine from my iMac running OS 10.9.5 (Mavericks) until after the HP Printer Software Update, Version 3.0, that I installed on 1 Oct 2014. Although the 3055 is shown as connected/idle to my iMac via USB, after clicking "PRINT" for a document, the print queue status soon changes from "printing" to "waiting for printer to become available", and the printer never becomes available. I have tried rebooting everything (printer, computer, text software), checking USB cable connections and changing USB ports, deleting and re-adding the 3055 printer (numerous times!) even after resetting the print system, but could there be something inherently wrong with the latest HP driver (version 19.9 for HP Laserjet 3052)? Or is it possible something else is going on?  In other words, I have exhausted all the solutions I've found in these and other forums to no avail.
    I have tested this printer by connecting it to my MacBook Pro (also running OX 10.9.5) but without having installed the HP Printer Software Update, Version 3.0. (Hadn't gotten around to this update...) The printer works fine, even though the driver has the same version number--19.9 for HP Laserjet 3052. So could the version 19.9 driver in the latest HP Printer Software Update be corrupted? Is there any way to reinstall that driver? Or copy the 19.9 driver from my MacBook Pro and install it on the iMac? HP only refers to the Apple Software Update process for Mavericks compatible drivers for this printer. Can I manually uninstall the HP driver for the Laserjet 3055 from my iMac and then have the iMac download the driver again in the process of re-setting up the 3055? Any suggestions appreciated.

    Many thanks for your suggestions. After creating a bootable back-up, I tried the first suggestion--downloading and re-installing the HP printer driver update kit for which you kindly provided the link--but to no avail. Before downloading the driver update kit, I "reset the printing system", clearing all the installed printers, queues, etc. After re-installing the HP printer drivers, I went to System Preferences>Printers & Scanners to once again add the HP LaserJet 3055 only to discover it was already listed as installed! This I find baffling, to say then least. I tried printing and again got the "waiting for printer to be available" message. I subsequently tried deleting and re-adding the printer, going through the printing system reset again, but still no-go.
    I also tried another approach to adding the printer which perhaps will shed some light on the problem. After clicking on the "+" button to add the printer, I select the "HP LaserJet 3055" which shows up as available via USB. Then, instead of using the "HP LaserJet 3052" driver that automatically appears in the "Use" [choose a driver] field, I chose "Auto Select" to see what happens. As the computer processes this request, the status message changes from "Gathering printer information..." to "Waiting for printer to become available..." And, of course, it never becomes available. This strikes me as odd, that the printer set-up system "sees" the printer accurately enough to list it as available to add but can't find it with the "Auto Select" approach to getting the appropriate driver. Of course, when I simply go with the "Use HP LaserJet 3052" driver option that, naturally enough, is the one automatically suggested by the printer set-up system, the printer is "successfully" added. I say "successfully" in quotes because it never becomes "available" to print something.
    Before I try your second suggestion--downloading and re-installing the 10.9.5 combo update--I wonder if it's possible that the printing system reset process is "broken". It's as though the reset fails to clear the printer queue, making it appear that there is a pending printing job that the system is waiting to be finished. Also, as noted above, I reset the printing system prior to re-installing the HP printer driver update kit and then, after installation, the HP LaserJet 3055 magically had already been added. This makes me wonder if the printer wasn't properly "cleared" from whatever makes up the printer System Preference process during the reset.
    Any other thoughts?

  • Duplex printing doesn't work on HP Laserjet 3055

    Hi!
    I am a new rMBP user and I need your help with setting up a printer. I want to use my old printer HP LaserJet 3055 for both side printing - using Widnows I didn't have any problem with that. The printer supports manual duplex printing - it means - print odd pages - beep - then I put sheets into the tray and click button - even pages. I use this printer via network.
    I was thinking about solution for a few hours. I've tried:
    installing printer with PCL, Postscript drivers,
    downloaded HP drives from Apple (even app store installed some kind of upgrade but doesn't include 3055)
    using HP Laserjet 3052 drivers (it's default choice by OS X)
    upgrading remotely printer drives using ltr command in Terminal,
    installing printer via USB,
    even installing Gutenprint and then hpijs with some sh**
    The printer is printing but not on both side My first impression about  OS X Yosemite and rMBP is awsome and I know that using so old devices may cause problems but I cannot change my printer.
    Help my guys, please!!
    PS Sorry for my English

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Setup issue in oracle projects - classifications link(standard link) is missing in oracle projects page

    Hi Team,
    I have a setup  issue in oracle projects
    I am unable to find the classifications link in oracle projects page.
    Navigation : Go to any projects responsibility-->search for the projects-->click on project -->click on setup Tab : At the bottom of the page, we can see some standard links along with UDA's.
    Here one standard link Classifications is missing.
    Can anybody guide me what setup we need to do get the link.
    Thank you.

    Hi,
    The classifications link is not appearing in your Project's Setup page because, Classifications must have been unchecked in the Project template from which your project has been created. You can find the Project template information by clicking on the Additional Information link in the same Project -setup page. Once you check the classification flag in the concerned Project Template, all future Project creations made out of this template would have the link enabled.
    But for the current project, classification link cannot be enabled.
    Rgds,
    Shan

  • Odd speed dial setup issue

    I am getting an odd speed dial setup issue.  Here are the steps:
    1. Open speed dial setup screen
    2. Tap an open slot
    3. Search for a contact using the keyboard
    4. Click on the contact to select it
    If I do it that way, I am taken back to the speed dial setup screen, but the contact is NOT added to the slot.
    On the other hand, if in step #3, I just scroll down the list of contacts and select a contact, it works just fine.  Seems to be an issue with the search function.  Anyone else have this problem?
    Android v2.2
    System Version.2.3.15.MB810.Verizon.en.US

    The steps that you are taking correct for setting up the speed dial. I have provided a link for additional information. 
    Click here http://motorola-global-portal.custhelp.com/app/answers/detail/a_id/48578/kw/speed+dial/p/30,6720,7500,/session/L3NpZC9zNEEzbVFhaw=

  • I am not able to install Scanner or scan from the Scanner to System.in laserjet 3055

    Laserjet 3055 Iam taking xerox / Printing from the Printer.  But not able to scan to computer.

    actually am not able to save them on my i phone , I actually deleted the folder which appears when we connect the I phone to the windows system (photo transfer without I tunes) I tried to restore it with I tunes and it started working but I loaded the backup the problem continued , one of my friend is also facing the same problem

  • HT1595 i can't see my apple tv on my screen? i'm not sure if this is an apple tv issue or a tv setup issue? (although it appears nothing has changed on my tv setup since the last time i used it?)

    i can't see apple tv on my screen? i'm not sure if this is an apple tv issue or a tv setup issue? (although it appears nothing has changed on my tv setup since the last time i used it?)

    As far as the flashing question mark and globe icons are concerned, your computer had lost track of its startup volume and was searching through the possibilities. The globe icon indicates that it is looking for a network to start from and the question mark indicates that it is looking for an OS X volume. To fix this, if you haven't already, go to System Preferences > Startup Disk and reselect your internal HD as the startup volume.
    From what you have described, this issue does seem to have corrected itself, and the faster start up is what one would normally expect. I think that you have absolutely no reason to reinstall your system.

  • AWE Transaction Configuration Event Notification Setup issue

    AWE Transaction Configuration > Event > Notification Setup issue
    On Final Denial Event has Notifications Option set to "Requester" "Both".
    The Email URL is redirecting to the correct Approval Component mentioned under Approval Component in On Final Denial Event
    But the Worklist URL is redirecting to another Component unlike the email URL, it is sending to a different component.
    Why the same notifications via the same Event (On Final Denial) have two different URL's??

    Hi,
    The worklist/notification component is defined on several places, where the "lowest" definition applies for the action being triggered.
    1 AWE Transaction Configuration> Transaction Registry > Default Approval Component
    2 AWE Transaction Configuration > Event
    3 AWE Transaction Configuration > Event > Notification > Template Detail tab
    Be aware that the Notification section in the Transaction Configuration shows 1 row in the grid, where more than 1 row can be defined. Click on the View all to expand the grid and see all notification defined for this event.
    See if above configurations differ in menu, component, page ...
    Regards,
    Hakan

Maybe you are looking for