HP LaserJet P1505n - Can't get Supply Status to print.

Greetings,
It is part of my job to make sure all the printers in our office buildings are stocked with toner. Whenever I try to print the Supply
Status page to see how much toner is left, all I get is the message:
"The Supply status is currently unavailable.
Please try again momentarily."
This would be fine, except I have tried again, at several different moments over many days. I really need this information to do my job properly. If I wait for it to run out completely, people have to wait until I'm informed and can get there to replace the toner. If I replace the toner whenever not willing to risk running out, it causes too much waste.
Any advice or help is greatly appreciated.
Thank you very much,
An IT person who doesn't know much about printers.

Apple doesn't show fax or scanner support for the HP MFP2727 in their list of drivers.
http://support.apple.com/kb/HT3669
But, HP shows a Firmware Update for this model that might or might not help.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=3377076&prodTypeId=18972&prodSeriesId=3377075&swLang=8&taskId=135&sw EnvOID=228

Similar Messages

From which table can we get the status of sales order

hi
from which table can we get the status of sales order

Hi
Check the Table VBUK for HEADER level status of Sales order
and VBUP for Item level statuses
enter VBELN = Sales order and VBTYP = C for sales orders
as VBUK and VBUP stores all Sales documents like deliveries, Invoices, quotations, contracts etc
Reward points for useful Answers
Regards
Anji
Message was edited by:
Anji Reddy Vangala

HP Laserjet P1006 Can not get new print cartridge into printer.

HP Laserjet P1006 Can not get new print cartridge into printer. Received two new cartridges from HP. CB435A, 35A are correct numbers for replacement but round part on left side appears too large for channel provided. I can not get the old cartridge back into the printer either. What am I doing wrong.

Hi,
Please use the following instructions to fix:
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
For MAC filter, you have to logon to the router to see.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can I get supplier actual lead time in system?

can I get supplier actual lead time in system?

suppose if oyu have created PO and as per your inforecord lead tine 15days but you really want the actula time based on the vendor promice
either you have to activate the ASN functionality or order acknowledge function
to do that when you create PO go to confirmation tab and select the order ack and/or shipping notification and make conf reqd filed checked that means prior to GR you need confirmation from vendor about the date, and qty atleast
you can receive the confirmation via EDI also but in this case you and vendor both should EDI funcitonality
once oyu receive the confirmation then you have to createin the system using VL31N tcode then it will be populated in your PO.

I am a Canadian staying in England for a few weeks. How can I get an iPhoto Book printed win England and sent as a gift to an English relative? With my account, it seems that Apple only allows for my book to be printed in Canada.

I am a Canadian staying in England for a few weeks. How can I get an iPhoto Book printed win England and sent as a gift to an English relative? With my account, it seems that Apple only allows for my book to be printed in Canada and then sent to my Canadian address..

in the iPhoto preferences change the print products country to the UK and give it a try - there may be some restirctions on billing but it has worked for some people
LN

How can I get another phone to print on my printer

how can I get another phone to print on my printer

Which printer?
Which Phone?
What connection type?
Please add some more details and then we will be able to assist you.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How can i get my ipad to print to my HP deskjet f4580

How can i get my ipad to print to a HP deskjet F4580

Hi there, probably the easiest way is to install the HP ePrint mobile print app on the iPad. Take a look at the information here to find out more about how this solution works and to find a download link to the App store in iTunes http://www8.hp.com/us/en/products/smart-phones-handhelds-calculators/mobile-apps/app_details.html?ap...
Feel free to post back if you're having any problems. All the best.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

How can I get my photos to print as they look on iphoto? Have tried my personal printer and Walgreens.

How can I get my photos to print as they look on iphoto? Have tried my personal printer and Walgreens.

Im not exactly sure what you mean by color profile..can you specify? So i have a dslr canon and take great portraits and tune them to exactly how I want them to look, they dont print at all like the colors presented on my screen. If i antique them then they print yellowish. Ive even tried printing them at walgreens because i thought it was my new printer. Hp hasnt let me doown til now. Is ot a printer setting? Ive never had this kind of printing issue.

How can I get my Epson NX625 printer back on line?

How can I get my Epson NX625 printer back on line?

The solution to your issue is in this thread:https://discussions.apple.com/thread/5233149
Specifically this post:
"astonishingly as it may seem, epson support sent me this 6 hours after i contacted them-
Subject
when attempting to print the epson print program shows "stopped - 'filter' faile
Discussion Thread
Response (Rodolfo M)
08/16/2013 03:21 PM
Dear Robert,
Thank you for contacting Epson.
I am sorry to hear that you are experiencing difficulties with your Epson Artisan 710 because of rastertoescpII error. To resolve this issue, please try the following steps below:
Power off the printer.
From the , select System Preferences.
Choose Sharing.
Check if "Computer Name" field is empty or not.
If the "Computer Name" is empty enter a name for the computer.
Restart the Computer.
Test if you are able to print.
We take your satisfaction seriously and hope that we have helped resolve your issue. If you receive a survey from us, we would greatly appreciate if you could take a few minutes to provide us with feedback about your support experience. Your ratings and comments are extremely important to us.
If this did not resolve your issue, please reply to this email for further assistance. If you have a different support issue, submit a request via our U.S. Support Site and we will respond in a timely manner.
Thank you again for contacting Epson.
Jun M."

I can't get my iPad to print with a HP 3520A printer

I have bought a HP 3520a printer and having connected it and loaded the software then registered for eprint I can't get my iPad to print. Can anyone help?

As it's not one of the printers that support AirPrint (http://support.apple.com/kb/HT4356), you will probably need an app - see if Kodak have their own app in the store, or there are third-party apps such as Print Central For iPad and Print n Share which might work with it. You could also do a search on here to see if anybody else has the same printer and see if they mention a particular app.

How can I get my ipad to print to my printer on the network

I can not get my Ipad to print to my network printer. The printer is an HP6500a plus officejet

You can use HP ePrint, Apple's AirPrint, or HP ePrint Home & Biz mobile app when it comes to the 6500A Plus eAIO.
Here are some articles pertaining to usage of these apps/methods of wireless printing that may help!
General how to for all methods:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02784317&cc=us&dlc=en&lc=en &product=4083977&tmp_track_link=ot_search
ePrint mobile driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ds-104730- 1&cc=us&dlc=en&lc=en&product=4083977&tmp_track_link=ot_search
Getting started with eprint:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02641663&cc=us&dlc=en&lc=en &product=4083977&tmp_track_link=ot_search
You want to make sure your printer has the latest firmware installed to support airprint. You can find that software by navigating your control panel on the printer to updates.
Once this has been performed it should be viewable as an Airprint compatible device through the ipad.
You can also download the ePrint Home & Biz app for free from the apple catalogue and use that method as well with much the same result, as well as online management capabilities on the printer.
Hope this helps!
I work with HP.

How can I get the status bar back on my web page

I want to get the status bar on the bottom of the web page so that I can slide from left to right if an article is too large for my monitor. I had it this morning 1-5-15. After checking out Thunderbird as an option for my email, the bar disappeared after uninstalling Thunderbird. I know about hovering over the web pages I have on my menu bar, but I would rather have the entire bar at bottom of page.
The gray bar shows up in my email only. I would like to have it on all my websites.
Thank you.

Does the scroll bar appear if you maximize the window or possibly switch to full screen mode via F12?
You can try to open the system menu via Alt+Space and see if you can resize the window in case the current window is too high and the horizontal scroll bar falls off.
Try to open a new window in case there is a problem with the current window.
You can check for problems caused by a corrupted xulstore.rdf file.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How can i get the status of the loaded database in OCI ??

Hi, buddy!
Now i wanna get the status of the loaded database,example MOUNT, NOMOUNT,OPEN. Can i use the OCI interface to get it? if it like that,
how can i do? Otherwise, is there another way to do in program??
thanks!!

My friend, thank you very much for your help!
I have tryed according to you advice. The result is that i can connect database successfully only when the database is in the OPEN mode. I use the V$DATABAES table to find the open_mode and of course the result is OPEN, so it's correct.
But when the database is in the MOUNT or NOMOUNT mode, i can't connect the database successfully.It will throw the exception "ORA-01033: ORACLE initialization or shutdown in progress".
Could you tell me why? Special thanks!!!
Message was edited by:
user588906

HP Laserjet M2727nf - can't get scan to work

I followed these instructions to the letter:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&dlc=en&lc=en &jumpid=regR1002USEN#
But I cannot my MAC to recognize the scanner. I am attached over a network. When I go to Printer Setup, the driver shows up as version 16.1. Do I have the right driver?
It prints just fine and I can see the printer webpage. How can I get scanner to work?

Apple doesn't show fax or scanner support for the HP MFP2727 in their list of drivers.
http://support.apple.com/kb/HT3669
But, HP shows a Firmware Update for this model that might or might not help.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=3377076&prodTypeId=18972&prodSeriesId=3377075&swLang=8&taskId=135&sw EnvOID=228

How can I get my 5524 to print 7x5 instead of 6x4 on 7x5 photo paper?

How can I get my photosmart 5524 to print proper size on 7x5 photo paper. It always comes out 6x4?

newbynorm,
According to the print spec:
http://goo.gl/50mSJ
5x7 is supported. The steps vary somewhat based on your operating system; what operating system are you running?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP LaserJet P1505n - Can't get Supply Status to print.

Similar Messages

Maybe you are looking for