HP LJ 1018 & Win 8.1

HP LJ 1018 to work under Win 8th Does not work under Win 8.1 driver is not available

Hi ssnet
I understand you need the drivers for Win8.1.
The driver for the Win8 will also work for Win8.1 full release but probably not the Win8.1 Beta version.
I checked other printer models and the drivers are the exact same.
I would download and run the HP Print and Scan Doctor to see if this resolve the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02073861&jumpid=ex_r4155/hho/ipg/cc...
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

HP Laserjet 1018 does not print (Vista)

Hi,
I've had the HP Laserjet 1018 for about 2 years and have been a very happy customer. Recently I upgraded to Windows 7 and have been using it without trouble for a few months. Just a few days ago I started having some spooler problems on Windows 7. Eventually the printer would not respond. I also have a laptop running Vista so decided to just use print using Vista instead.
The problem I'm having on Vista now is that when I send a print command, the printer does go into a warm-up state for about two to three seconds. I can hear moving parts inside and at the same time the 2 lights blink alternatively. But after this warm-up state the printer would just stop. At this pint the print queue on windows would be empty again, as if the print job has been complete.
I've used this printer with my Vista laptop for a long time without any problem. I hope this is a common problem and can be easily resolved. Thanks in advance for helping me out.
Theo

I have a similar problem. Dell XPS 64 bit desk top using Laserjet 1018 with Vista. Upgrade to Win 7 four months ago without a problem. Six days ago the print spooler stopped and stops immediately every time I start it. Pages of error reports in event log, but can't find one with a cause (that I can understand anyway). Cannot print. Can't uninstall HP drivers to install any new drivers because the spooler is stopped. Ran Windows system file checker without a problem documented. Windows says the printer is working and trouble shooter did not help. Printers display on control panel with limited function upon right click. Can't choose print directly to printer. A number of similar posts on Microsoft site without viable solution.

Share printer hp laserjet 1018

I have 3 computer one desktop with win7 family edition32bit and printer connect USB port (work fine) second laptop window xp home edition share the same printer wireless (work fine) third laptop win 7 family 64bit same setting for the printer but not work wireless (false paperjam message) printer work fine if i plug with USB all driver up to date

Hello muffa,
Welcome to the HP Support Forums!
I see you are attempting to install the LaserJet 1018 onto your new Mac, probably 10.9. From the research I have done, this printer is not supported on any Mac.
There is not much in this document, but it does display which LaserJet printers are not supported: This Product Is Not Supported in Any Macintosh Environment.
I have even looked into what Apple drivers are available for this printer, it seems there is nothing either. Here is the list: OS X: Printer and scanner software available for download.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Hp laserjet 1018 on Windows 8

Dear Sir ,
Product Name : HP Pavilion G4-2191SE
Printer Name : HP Laserjet 1018
O/S : Windows 8 PRO. 64 Bit
I've tried to download the driver of my above printer to be worked on Win 8 64bit but coudn't as it's still not availabile at HP drivers website till now.
Could you please help me to solve this problem , in order to use the printer on my new os.
Thanks and best regards

Hi,
Sorry I have to repeat this: Please check these to see if your printer IS in the lists:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03168175&cc=us&dlc=en&lc=en
1. If yes, you can download driver for it now.
2. If no, you have to wait longer and driver(s) may not come.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Laserjet 1018

I have 3 computer one desktop with win7 family edition32bit and printer connect USB port (work fine) second laptop window xp home edition share the same printer wireless (work fine) third laptop win 7 family 64bit same setting for the printer but not work wireless (false paperjam message) printer work fine if i plug with USB all driver up to date it seem a driver compatibility whit 32bit vs 64bit in win 7

Hi annelies,
I am sorry to inform you, the Laserjet 1018 is not supported in any Mac envoirnment:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01973413&cc=us&dlc=en&lang=en&lc=en&product=181...
You may try the following workaround and check if that may help:
Download and install the following package:
http://support.apple.com/kb/DL907
Open Print & Scan and click the Plus sign.
Select the listed Laserjet 1018.
Click the Use drop-down and click Select printer software.
Select the Laserjet 1022 from the list, add the printer and try printing using the configured printer.
If that does not help you may also try the 3rd party foo2zjs drivers and check if that works:
http://foo2zjs.rkkda.com/INSTALL.osx
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Install win 8.1 error looking for disk

I have a new Mac Mini w/ Mavericks OS. I have been trying to install Win 8.1 for days. I had a keyboard on order, finally came today to allow me to Recover the Mac from a failed Win 8.1 install. I have read hundreds of conversations on this topic. And to air one question constantly asked, 'Why! Why is it that there are dozens of different ways people are having to use to install one program? Why?!?'
I am able to get to the page in Windows setup where I am to select the drive called BOOTCAMP.
I select the drive
I then FORMAT the drive
Then I am told that drive - or any installation for Windows drive - is NOT found or available.
I've gotten to this screen a dozen times now.
I have arrived there by two methods 1) following the 'book' on Win 8.1 installation via BOOTCAMP and 2) Once here I shut the machine down and reboot with CTRL-key at restart -> select the WINDOWS drive from those available -> then follow the Windows install panels. Which, every time leads me right back to this page.
A note about this page. Every online tutorial, including the one on the Windows site and here on Apple forums, shows a DIFFERENT layout of the page. The tutorials show a page with a link to click for Advanced settings. My window just shows those Advanced settings. I don't see how this makes the process work or not, but that's a peculiarity of my setup woes compared to the instructions that exist.
NOW .. HOW in the name of all that is sensible!! -- do I get from the page where I select the partition I need to install Win 8.1 on..?
Again ..PLEASE!!! DO NOT retroute me through all the old settings everyone has been hashing about since September 2013. I need to know What Works NOW - January 2014- to get Windows 8.1, installed and working on my Mac Mini running latest version of Mavericks.
Thank you ... I HOPE!

Windows 8.1 is not yet officially supported in Bootcamp. There is no way to know when it will be supported.
Having said that some systems will install it and it runs fine, though these systems appear to be few and far between.
The only advice I can give is to try some of the workarounds available on various sites or wait until it is supported by Bootcamp.

Running Dual boot windows 8 and win 7 pro with xp mode installed!! I love it!!

It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
Step 1: using diskmgmt.msc you have to shring the C partition. I shrunk it so I had 80GB remaining as unallocated space.
Step 2: You have to enter the machine Bios adn set the BIOS to Both and UEFI as first
Step 3: Connect your usb dvd
Step 4: Put your win 7 pro dvd in the usb dvd drive
Step 5: Reboot your machine and when it starts press F12 to get the boot menu and select the usb dvd drive then press enter
The machine restarts
Message on screen says press a key to boot from cd/dvd
Press space and it boots up the win 7 pro DVD
After files copy and load the setup screen asks to accept the agreement and where to install win 7
BE SURE TO SELECT THE 80GB location
Then follow thru the win 7 prompts to load it.
When the machine restarts you will see a dual boot screen with Windows 7 on top as first selection and Windows 8 below it as 2nd selection.
Make sure to hit enter with windows 7 selected
The win 7 installation completes.
You will see many items with drivers not installed dont fret.
You can load most of the drivers by highlighting the device in control panel/device manager and pick update driver then select BROWSE for DRIVER and be sure to put in drive D:\ which is now the windows 8 drive and hit search.
Many of the windows 8 drivers installed with no issue.
The Realtek driver was an exception .. goto to the lenovo site and pick the x100e tablet and download the LAN driver from there about (4MB). Copy it to flash drive and install it in win 7 from the .exe file. The driver for LAN will install sucessfully. The version of the driver is 7.46 something the 7.11 versions do not workl.
I have only 3 drivers that I could not find - 2 list as unknown and are related to ACPI or power management and 1 lists as USB controller but all the USB stuff works without it.
Be sure to either shutdown the system or sign out of win 8 when your done so you get the dual boot menu. If you shutdown while logged into win 8 the next time you start up it will go right to win 8 until you signout and restart.
Just to let you know an easy way to shutdown is go to the desktop and press ALT + FN + F4 and a shutdown menu comes up on the desktop.
Once win 7 pro is installed you can download the XP mode free from Microsoft and install it.
This is of course AFTER you have ACTIVATED WINDOWS 7 ONLINE with YOUR ACTIVATION KEY(you supply).
ENJOY! This is the BEST machine I ever had!

It's been many, many years since I don't do dual boot anymore. Don't find the reason to do it, either. Different kinds of virtualization should be enough. Anyway...
dfw1417 wrote:
It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
ENJOY! This is the BEST machine I ever had!
WHICH machine?
Cheers.
If I helped you, please give me some kudos! ^^

Can a Mac and a Win share the same music library on an external?

I have a Powerbook, my wife a Toshiba laptop, both are authorized under my account. She's relatively new to iTunes and ipod so she has a small library on her Win machine. My Itunes library has grown so large I'm about to move it to an external drive. I'd like her to be able to access that library to load her ipod.
Is it a matter of formatting the external the correct way?
Powerbook G4 Mac OS X (10.3.9)

Interesting question!
I think the answer is FAT32, but I'd rather you tried NTFS first.
grin

TS1363 I was upgrading iPhone OS from 5.1 to 5.1.1 on Win 7 using iTunes 10.6.1.7. The iPhone hung. It is no longer visible by iTunes on Win 7

While upgrading iPhone OS from 5.1 to 5.1.1 on Win 7 using iTunes 10.6.1.7, the iPhone hung. I could not get iTunes to find it and Win 7 does not see it.
When I connect the iPhone to the USB, Win 7 issues the welcome sound, but that is it. The same happens when I disconnect iPhone.
The Devise Manager has the Apple Mobile Device USB Driver correct without any problem. I updated this driver called usbaapl64.
The iPhone is still hung.
I restarted the iPod service
I restarted the Apple Mobile Device Service
I tried to empty and delete the temp directory in C:\users\myname\AppData\Local\ but could not
The iTunes I am using is the latest version
I updated the Apple Mobile Device Driver as stated above correctly
The iPhone is still hung and is not recognized by Win 7 or iTunes, so I cannot restore the OS to the previous working version
What else can I do to restore the previous working OS on my iPhone 4

I was connecting the iPhone 4 to a USB 3.0 port. I was told by Apple Express Support (at US$29.99) not to use USB 3.0 and to use USB 2.1 instead.
If you are connecting your iPhone to the computer using a USB 3.0 port, disconnect it immediately. iPhones will lock up if you try to update while using a connection through a USB 3.0 port.
Disconnect the iPhone from the computer
Go to Device Manager and find the connected USB port. Click the mouse right button and update the driver
Shut the iPhone by pressing the sleep button and the home button concurrently for some time
Move the USB cable to a USB 2.1 port or older without the iPhone.
Restart iTunes.
Connect the iPhone
Your computer should recognize the phone and reloads the correct USB 2.1 driver (Apple Mobile Device)
Then iTunes should recognize the iPhone and starts reloading the firmware.
When that is complete it may ask if you wish to restore, naturally you say YES
iTunes will restore the iOS
Using iTunes, restore the latest backup to get your data back.
When all of the above is completed. Start enjoying your iPhone.
If the above does not work. Throw your iPhone out of the window and get a replacement Android phone.

Windows Easy transfer , ERROR message when trying to copy settings to Win 8 PC

I have a new hp-TouchSmart Envy 23. It has 2TB drive.
I want to use Windows Easy Transfer to move all my settings and data from the Windows 7 machine to the new hp-TouchSmart (my older PC is hp desktop is model # m9177c and has Win 7 OS) .
I have used easy transfer many times and I am reasonably experienced user .
I just cannot transfer my settings and data to my new PC. I have therefore copies all my data to the hp-TouchSmart . However I need to use Windows easy transfer to move all my settings. I have a very large number of settings , macros and much else that would take a very large amount of time to re-type.
I get an ERROR message when I want to transfer my settings. It says I don’t have enough disk space. The file I want to transfer is only 10.5 GB (after I removed all my data). The new machine has 2TB and yet I keep getting this error.
I have tried every possible way of transferring the settings , including : external drive; flash drive; direct wire ; easy transfer cable etc. I keep getting the same ERR message .
I am sure Easy transfer must allow transfer from Win 7 to Win 8. BUT HOW?
PLEASE do help. I would really appreciate very much .
THANK YOU
Adam

This thread may be useful.
Windows Easy Transfer will transfer from one drive to the other to mirror the original drive. What I suspect is happening is that the program is grabbing the D drive (recovery partition on most systems) and trying to transfer it to the new system which should also have a D drive. If that is happening,t hen that error will be thrown.
Try using the advanced options and view the report to see what exactly is happening and triggering the message.
Let me know what happens.
The document in the thread is for a previous version of Windows, but you can search for Easy Transfer Reports from the Start screen in Windows 8.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HP LaserJet 1018

Hello,
I'm trying to get this printer to work with my new MacBook Pro. I plug it in, go to System Preferences, Print & Fax, Add the printer under default, and when it searches for new drivers, it can't find any... does anyone know where you can download drivers for any printer for Mac OS X? This way, I'll just have it point to the driver saved.
I have the same problem at work with my Samsung ML-1710.

I don't really know--when I installed Leopard I trashed all the printer drivers that were included and then installed just the ones I needed from the HP web site. The included printer drivers take up 4 GB or something ridiculous, so I just got rid of the lot along with all the languages I don't use.
If you are near an Office Depot, check out their sales. I got my HP 1022 Laserjet for $99 with a $100 mail in rebate. And just recently I saw a fancier model that also scans and maybe faxes for $129 on clearance.
For some reason, HP makes some printers for Windows only and a little more expensive version for both Windows and Macs. The 1018 and 1020 are both Windows only as I recall, but the 1022 is for both Windows and Macs. If you get one new, it should come with a CD which will contain the driver. The reason for going to the HP web site and downloading the driver is to be sure you get the latest version, and to be sure the version you download is the right one for your OS. Because Apple keeps updating the OS, third parties also have to keep updating their software to be compatible with the latest version of the OS. That is why the drivers which come with the computer and the CD's which come with the printer can eventually become dated and too old to be compatible with the latest version of the OS. If you are looking at a new printer, be sure to check the manufacturer's web site to be sure there is a driver compatible with the version of the OS that you are running. Since you seem to be running Tiger, chances are that the drivers will be compatible. If you upgrade to Leopard, you might need to download a newer driver.
Also, when you are looking at printers in a store, it should say on the box if it is Mac friendly. Look for the blue Mac happy face. It should also list the OS versions it works with.
I have never had a Canon, but I had an Epson inkjet that I hated--expensive refills, and if a color ran out, it wouldn't print black and white, even with a full black cartridge. So I don't like Epsons, but I never tried one of their laserjets.
Also, if the printer is listed on the Apple web site, sometimes there are some reviews by people who have bought them. That kind of feedback can be helpful when deciding among different printers--at least you will probably hear about any problems.
Good luck!

Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop

My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.

Sorry you are having problems with printing from the internet. I have a few more questions to ask you before I can be of much assistance.
What web-browser are you using?
Do you have any problems printing from Word or other non-internet documents?
What did you do to fix your computer (system restore, clean install of the OS, etc)?
Have you tried an alternate web-browser?
Make sure to install all of your Microsoft updates to see if that helps. Otherwise, answer those questions for me please and I will be happy to help.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Update frome win8 to win 8.1 error oxc1900101 - ox30018

I have purchased at Toshiba laptop including win8.
After release, I installed win 8.1 easily, following common procedure. It worked perfectly and I was quite happy with it.
Due to some hardware issues, I turned the laptop in for repair.
The motherboard was replaced with a new one, and win 8 was reinstalled when I got the laptop back.
Obviously, I wanted to update to 8.1 once again.
This is where all my problems started.
Apparently the update is being installed, but at 95% of the install process done, it stops and reinstall win8 again.
The error codes oxc1900101 - ox30018 are displayed on the screen.
I have now spent months reading on that same problem online, and tried a lot the proposed solution, but with no luck.
I found many many people who had trouble updating, so clearly, there IS a problem with win 8.1
I have called Microsoft support, who said that Toshiba was responsible.
Toshiba says to contact Microsoft...
Microsoft wants me to pay 99$ for support, so they will fix it.
But it is supposed to be a FREE and very easy update - why would I pay for that?
I have tried to update drivers, clean start, reinstalled win8 a lot of times, uninstalled anti virus and anti malware, went into bios and disabled usb3, used lan cable instead of wi-fi and many more things, but the same error code still appears every time.
I really hope someone can help me - PLEASE PLEASE!
I don't think it is fair, that I have to buy a new license for win8.1

H Dennis,
When you roll back to the Windows 8, did it work fine? Was it activated? OEM's license is binding with motherboard.
If you change motherboard, it will not be activated.
Please contact Toshiba to activate it. Then try to upgrade.
The most cause is the hardware compatibility.This guide will be help you check if your computer meet its requirement:
Update to Windows 8.1: FAQ
http://windows.microsoft.com/en-IN/windows-8/upgrade-to-windows-8
If the issue still persists,upload the setup log file here in order to provide further help.
http://technet.microsoft.com/en-us/library/hh824819.aspx
Karen Hu
TechNet Community Support

Satellite Z930-14F - cannot install Win 8.1 from SCCM 2012 R2 environment

Dear all,
Sattelite Z series laptops cannot install OS (win 8.1) from our SCCM 2012 R2 environment.
Either no installation is starting, or pxe boot aborted error is showed.
The environment is used to successfully install OS (win 8.1) on different other vendor computers (dell) and virtual machines (hyper-v and vmware).
I've tried both UEFI and CMS boot options and tried to switch off the secure boot. Please advice.
Also, i've read about the "SCCM installation package for Toshiba". Will it help in my situation or is it just driver packages for SCCM?
Best Regards, Evgeny.

I guess you are speaking about this Toshiba package:
http://www.toshiba.eu/services/on-demand/business-computing/sdp120gs-v/
I dont have much experience using such SCCM drive package but it definitely compatible with the Toshiba business notebooks. The Satellite / Portege Z930 belong to the business range and I think the package should be compatible.
This package seems to be for all IT administrators who manage devices on the corporate network with SCCM 2012 R2. Toshiba offers with the new Toshiba SCCM package a solution to integrate other notebook into an existing IT infrastructure quickly and smoothly and all Toshiba Driver and application packages and a demonstration task sequence are integrated.
However, it seems that you could get more details about this package directly from Toshiba [email protected]
By the way: The Win 8.1 installation requires the UEFI mode (in case the UEFI BIOS is available). But booting from another, external source requires the disabled secure boot option.
So maybe you should use the UEFI mode but should disable the secure boot option in order to boot from LAN.

Pdf printer driver install win 8.1

i have uninstalled and reinstalled reader 11 5 times, that is after installing reader 8.1 in cs3. i have searched and tried every option and spent 5 hrs trying to get the pdf printer installed on my new asus with win 8.1. i was able to down load pdf blue and it worded out of the box. but why should i pay another $50 when i already pay adoby for the reader. can any one help me with the fix?

I have read your post several times, but I cannot figure out what your problem is; can you rephrase it?
Also this part does not make any sense to me
cy0179 wrote:
why should i pay another $50 when i already pay adoby for the reader.

HP LJ 1018 & Win 8.1

Similar Messages

Maybe you are looking for