HP LJ 600 M602 printer hard drive pass word reset

How to reset a lost password for a HP LJ 600 M602 printer. The Solid State hard drive failed and it is asking for a password in the admin menu. I did not set a password on this printer or hard drive.

If you could provide the error/code it is generating, we could prove you the password.
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

HP LaserJet 600 M602 printer goes offline every night

Hi,
I have a HP LaserJet 600 M602 CE991A printer on a wired network. I have quite a few other printers on the network as well and do not show me this kind of behavior.
But for some reason, this printer, from as soon as I bought it, goes offline every time from around 5.20-5.30pm to around 8.30pm. I have a ping tester running as I am trying to figure out what's going on and I got 100% drop every night for that time period.
I looked to see if there was a setting that puts this device to sleep or so but no, I cant find anything. I have tried with the energy setting sleep mode on or off, wake up events to trigger a wake up call to the printer but no luck.
Firmware Bundle Version3.2.5
Firmware Revision2302908_435019
Firmware Date Code20140529
I am out of options, in our other locations, we have sam printer but a CE993A models and they do not show this kind of behavior at all.
I am at a deadlock here.

Hi @Halan ,
I see by your post that you aren't able to print when the laptop isn't in the same area as the printer. I would like to help you out today.
What is the distance of the printer and the Laptop when the printer goes offline?
Try these steps to see if it will resolve the issue.
'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laser Jet 600 m602 printing issues

Device: laserjet 600 m602
Issue: error submitting print jobs through print server or directly.
Printer can be normally pinged and managed through web UI.
However last event log entry is dated April 30 with error codes 49.2F.E3 and 49.2F.51.
Since then I have managed to upgrade firmware to latest however nothing changed.
Print job sumbitted directly from web UI reports success while nothing gets printed while printing normally generates error printing status in the job queue. Any help greatly appreciated.

Hi damjano,
The HP LaserJet Enterprise 600 Printer M602 series are commercial printers. I recommend posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Also, here is a link to the support page:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Airport Express with printer & hard drive with Time Machine

I have a MacBook that I'd like to backup its data. Concerned about the following (in level of concern from highest to lowest): theft, crash, fire.
I currently have an Airport Express with a Brother printer attached to it that my PC and MacBook print to.
I am really in a dilemma as to what to do. I was looking into Carbonite to get an offsite backup location of my data. (I figured offsite would cover all concerns of losing data due to theft, fire, or just a crash) However, Carbonite does not hold onto data you delete (ie, my photos and videos will fill up my hard drive eventually and I'd like to just archive them in one central spot when I am done accessing them on a regular basis-- ie delete them off my MacBook hard drive). That is like $55/year to do Carbonite... but, the only thing that will help me with over a hard drive in my house is a fire (and theft if a burglar were to find where my backup drive was in the house).-- Of course, I'd probably want a different location for my hard drive for that reason -- so, I'd have to buy another airport or just a time machine that has the wifi built in.
I've read lots of issues with the Western Digital trying to download programs onto your computer... I have one for my PC that I backed up photos manually and it did try to install programs when I attached it to my PC... not so much my Mac when I took some photos off it. I looked into getting another portable hard drive at Costco for my Mac, but realized that it would require reformatting to use on my Mac (as it was built for a PC).... something I wasn't sure if I was computer-savvy enough to do or if I did do it, would I end up with issues later on?
Anyhow... in the end, what do you all do to backup your data, especially photos and videos? Do you have smaller hard drives that you back up to and then when full move them to an offsite location? Can you have more than one "hard drive" backing up..... I was thinking it would be nice to have one larger hard drive that would potentially hold all my photos and videos so I can access anytime, but then have smaller drives of the same data that I can take to a safe deposit box and use as my super secure backup (no fire, no theft, no crash).
btw, When doing time machine, does it keep all the metadata with each photo?
Burning CD's is time consuming.... and, I have heard there are different qualities of disks out there... archival v. not... how long do the archival last v. the non-archival... or is that more of an issue for future generations not being able to access our photos?

You need to remember that the Time Capsule is both a wireless router and a hard drive all in one enclosure. If you don't need a wireless router, around $150 of the $300 for a Time Capsule is going to be in the router portion of the device.
The nice thing about the Time Capsule is that it is a network drive. All Macs running Leopard or Snow Leopard will be able to back up automatically to a single device. The first generation of Time Capsules about two years ago had some power supply problems that affected some users. Apple announced a program for these users to replace their Time Capsules.
So, it depends on your requirements. If you are looking for a new, dual band wireless router and want to backup your Macs running Leopard or Snow Leopard automatically using ethernet or wireless, the Time Capsule is a logical choice.
If you don't need a new router, then you'll need to look at a separate hard drive that will be attached directly to the computer using the USB or FireWire port. If you have two Macs, you'll have to get two hard drives if you want to do Time Machine backups correctly.
Most hard drives can be reformatted to work with Mac if you don't mind a few extra steps and Disk Utility (Macintosh HD > Applications > Utilities > Disk Utility) does not look too complicated for you.
Message was edited by: Bob Timmons

AirPort Extreme does not see printer, hard drive, AirPort Express!

I just got an AirPort Extreme (802.11n), to replace my AirPort Express. I have a Brother 665CW wireless all-in-one printer, which had worked perfectly but now I cannot find it. I have also hooked my USB hard drive into the Extreme. I can see the hard drive in the AirPort Utility, but I don't know how to find it from my iBook. I'd also like to put the Express in another room to use the AirTunes feature. Unfortunately, almost nothing is working!
Here is how it's set up:
Den:
AirPort Extreme - hardwired to:
- DSL modem
- hard drive (via USB)
Brother 665CW (wireless)
Living Room:
AirPort Express
Advice would be appreciated. I'm usually able to troubleshoot my problems, but documentation on this Extreme is really bad! Thanks!
iBook G4 Mac OS X (10.4.9)

I had problems adding Airport expresses using Airport Utility. However I found it worked fine if I used the manual set-up option and not the Assist me option.
Reset the airport express then, in manual set-up, set the express to 'join an airport network' add the airport network password and see if that works

How to access printing & hard drive from my PC via AEBS

Got my MacBook Pro connected to my new AirPort Extreme Base Station and every thing is up and running along with wireless printing and Back-Up hard drive. My son’s PC running XP is connected to the AirPort broadband signal just fine, except I haven’t figured out how to have the PC to access the AirPort connected printer and networked hard drive. So, anyone have any words of wisdom in this arena?
Regards,

The AEBSn shares a USB-attached hard drive using both Apple Filing Protocol (AFP) aka AppleShare, the same format used by Personal File Sharing or the OS X Server to share files, AND Samba, a network file-sharing service compatible with OS X, Windows and Linux. Shared drives must be formatted in either Mac HFS+, FAT16 or FAT32. NTFS-formatted drives won't work.
To access the shared drive from Windows, just bring up the network browser by double-clicking Network on the Desktop. The base station name should appear in the Network browser window.

Hard drive passes all tests but extremely high response times causing major performance issues.

I have a HP Compaq Presario CQ62-360TX pre-loaded with Windows 7 home premium (64-bit) that I purchased just under a year ago.
Recently my experience has been interrupted by stuttering that ranges from annoying in general use to a major headache when playing music or videos from the hard drive.
The problem appears to be being caused by extremely hard drive high response times (up to 10 seconds). As far as I know I didn't install anything that might have caused the problems before this happened, and I can't find anything of note looking back through event viewer.
In response to this I've run multiple hard drive scans for problems (chkdsk, scandsk, test through BIOS, test through HP software and others) all of which have passed with no problems. The only thing of any note is a caution on crystaldiskinfo due to the reallocated sector count but as none of the other tests have reported bad sectors I'm unsure as to whether this is causing the problem. I've also updated drivers for my Intel 5 Series 4 Port SATA AHCI Controller from the Intel website and my BIOS from HP as well as various other drivers (sound, video etc), as far as I can tell there are none available for my hard drive directly. I've also wanted to mess with the hard drive settings in the BIOS but it appears those options are not available to me even in the latest version.
System Specs:
Processor: Intel(R) Pentium(R) CPU P6100 @ 2.00GHz (2 CPUs), ~2.0GHz
Memory: 2048MB RAM
Video Card: ATI Mobility Radeon HD 5400 Series
Sound Card: ASUS Xonar U3 Audio Device or Realtek High Definition Audio (both have problem)
Hard Drive: Toshiba MK5065GSK
Any ideas?
Edit: The drive is nowhere near full, it's not badly fragmented and as far as I can tell there's no virus or malware.

Sounds like failing sectors are being replaced with good spares sucessfully so far, this is done on the fly and will not show in any test, you have a failing drive, I would back up your data and replace the hard drive.
Sector replacement on the fly explains the poor performance also, replacing sectors with spares is normal if it is just a few over many years, but crystal is warning you there are too many, a sign of drive failure is around the corner.

Two computers to one external hard drive problem, pram reset...

I have a Powerbook 15" 1.0 Ghz and recently I made the mistake of connecting one external hard drive to two computers. My OWC External hard drive was connected to my powerbook via firewire 800 and my PC via firewire 400 with both on. There is a tiny little blurb on the external hard drive's instructions that says do not connect to more than one computer at a time but of course I didn't see that until after the fact. My powerbook was painfully slow so I restarted but it wouldn't come back on. I was instructed to reset the pram, which I succesfully did but now the powerbook is so slow it is unuseable. The pc works fine. Did I do any permanent damage? Do I need to reinstall OSX or what? I will kill myself if I fried something on my powerbook. Please help!!

Disconnect all devices from your PowerBook as well as power and the battery for about 30 seconds. Put the battery and power back in/on and then reset both PRAM (3 consecutive times) and the PMU. Hopefull this'll bring it back to life.
Otherwise, create a new user account and see if things are better there. It is possible that you have damaged software rather than hardware so a clean instal may do the trick.

Time Capsule on an external hard drive and password reset

Folks, I have a problem, and am hoping someone samrter (yes, intentional spelling mistake) than me can help. I've used an external USB drive as my time capsule, which has worked for me without a hitch for a couple of years.
I've just recently upgraded my MBP to Mountain Lion, and had noticed that everything was VERY slow. So, as a result I decided to reinstall ML by wiping my MBP hard drive clean, and doing a fresh install, which resulted in a very responsive OS.
Now the problem: when I went to restore my MacBook Pro from my TC on my USB drive, I was prompted for a password, which I provided, and have met with no success, then I ended up trying EVERY password that I could think of, and NONE of them worked! So, my question is this: Is there a way to retrieve/reset the password on my external USB Time Capsule?
Thanks in advance for any bit of wisdom
Mike.

Mike022465 wrote:
I tried restoring via Migration Assistant, and I was prompted for a password.
Very odd. Are you sure the drive wasn't encrypted? That's the only thing I can think of that would cause a password prompt there.
Can you post a screenshot of the prompt? That might provide a clue.
Here's the prompt for an encrypted drive:
Sorry, wasn't trying to come across as a weiner....
No problem -- just hard to figure out what's going on.

Why can't i use realplayer with my mac anymore? it worked fine until i had the hard drive erased and reset

why can't i use realplayer with my mac anymore? it worked fine until i had the hard drive erased and reset

Did you remember to reinstall it?

Device sharing (printer, hard drive) with MiFi 2200?

Is it possible to setup network shares using the MiFi 2200 using Windows XP Pro SP3? I've shared devices through a wired network before, but cannot seem to get it to work through the MiFi device.
The following thread makes me think I need a dedicated router for this to work -
http://community.vzw.com/vzw/board/message?board.id=Broadband_Netbook_MiFi_Devices_tmp&message.id=4159#M4159
Thank you.

Unfortunately this function is not available on this device. It is strictly for internet access rather than sharing network settings like on a printer. You will need a different type of network sharing system for this option. Hope this helps.

Pass word reset

My granddaughter has and old Ipod and has changed the code and has forgotten it. How can we use this Ipod?

For "regular" iPods (that are not the iPod touch), if you connect it to the computer that has the iTunes library normally used to sync this iPod, it should unlock. Otherwise, if that is not possible, you may need to do a Restore on the iPod using iTunes.
http://support.apple.com/kb/ht1339

HT5624 Pass word reset

I am trying to reset my password on my sons ipod, but am not receiving the email confirmation please help?

Make sure that you are are looking in the right mail account and that you have checked your spam folder.
Next try again. Last, contact iTunes by:
Contact iTunes

HP LJ 600 M602 uses paper from other tray

I have a problem with a new HP LJ 600 M602 printer.
I think it's best to discribe an example of the problem.
For example i start a printjob of 1000 pages from tray 1 which holds 500 sheets. Now it should just say tray 1 is empty when it hits the 500 pages printed but it wil automatically continue to print from tray 2. This should not be happening since i turned off the option "Use other tray" on the printer it's self and the web interface. It is also turned off in the printer settings on the computer in word that is used for the printing.
The actual configuration of the printer is:
Tray 1: Manual
Tray 2: blank paper
Tray 3: paper with corporate logo1
Tray 4: paper with corporate logo2
And all have the option "use other tray" turned off.
Could this be a driver problem or am i missing a setting somewhere?
Sorry if my english is not 100% it's not my native language, and thanks in advance if you can help me!

Hello Jackkemkens
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Hard drive failure on a G72-260US?

I hope someone has a few tips to help me out on this. I picked up an HP G72-260US about 10 months ago and suspect the hard drive has failed. I have had no prior problems with the unit. I was starting to back up about 3 months of photos to DVD and all was well. I went to refill my coffee cup and when I come back I had a black screen with 'no boot device - insert boot disk and press any key' message on the screen. I then turned it off and back on and got no boot device again. I checked in the bios (esc key on startup menu) and the hard drive is no longer listed in the list of boot device order. I tried the test from this menu and it says I have no hard drive installed. I used the restore bios default key and saved it but no change. I unplugged the cable between the motherboard and the drive on both ends and checked but could not see any oxidation. I removed and inserted both ends of the cable several times just to make sure. I can hear a solid 'click' when I power down coming from the drive as if the heads are parking so I assume the drive is getting power. I think I can feel a bit of vibration from the drive and it sounds like it's not spinning up to anywhere near normal speed. If I put a bootable cd into the cd/dvd drive the unit boots up but the hard drive does not appear in any list - it's like it vanished into thin air. This is my first HP notebook since I usually purchased another brand so I am hoping there is some trick here that I don't know rather than it came equipped with a 600 hour MTBF hard drive.
Thanks in advance for any help.

Sounds like it has failed,
Install a new one and use the HP recovery discs to install the OS.
If you have very inportant files you need recovered, you can contact this company, they are the least expensive and reliable company that can recover your data.
http://www.lowcostrecovery.com/pricing.html

HP LJ 600 M602 printer hard drive pass word reset

Similar Messages

Maybe you are looking for