HP Officejet 7410 All-In-One Doesn't work after installing Snow Leopard

installed Snow Leopard yesterday ....my HP 7410 printer doesn't work properly ....take a look at the response the HP Service Center gave me:
+Hello Charles,+
+Thank you for contacting HP Total Care.+
+I understand from your email that you want the 'HP Officejet 7410 All-in-One Printer' software driver for 'MAC OS X 10.6'.+
+I appreciate for the opportunity to assist you.+
+*Charles, I regret to inform you that the unit does not support the operating system. I recommend you change the OS to Microsoft Windows to avail the unit software driver.*+
+I will be more than happy to assist you when you change the OS.+
+For information on keeping your HP and Compaq products up and running, please visit our Web site+
at:
+http://www.hp.com/go/totalcare+
Sincerely,
Sentinaro
+HP Total Care+
+Our advice is strictly limited to the question(s) asked and is based on the information provided to us. HP does not assume any responsibility or liability for the advice given and shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information. Always back upyour data.+
+For more information, including technical information updates, please visit our Web site at http://www.hp.com/support.+
+HP does not require you to send any financial data in your reply to this email. As a prudent reminder, do not insert credit card details or other financial information in any e-mail replies.+

Help! I've spent hours researching this and can't find a solution...
I upgraded 3 Intel Macs in the house to Snow Leopard last weekend. All went differently...but all were successful. I found that the connection to my HP Officejet 7410 (connected wirelessly to 802.11g Airport Express (AEX) network) was "broken". Deleted then "re-intalled". Documents could now be printed. I then found out scan function was "broken". Figured out how to scan with new Snow Leopard "baked-in" driver and Scan tab...different, but it worked.
Then, tonight, on the eve of my birthday, I was given the green light to purchase an Airport Extreme 802.11n (dual-band) base station (AEBS). I set it up and got 2.5X speed on the two 802.11n laptops in the household. Glorious! Then I went to work to ensure print and scan functions were still operational. Tried to re-connect HP OJ 7410 to wireless network...when it found the network it asked for the "WEP" key (on previous AEX network I was secured utilizing WPA2/Personal)...I entered the WPA2/Personal password (same as previous network) and got the error message "Key must be 5 or 13 characters OR 10 or 26 length with 0-9 and A-F (hex)". So I turned off the wireless radio and instead plugged the 7410 into the AEBS via USB. Deleted the previous queue and re-installed. Found the printer no problem but now without the Scan tab or function anywhere...despite following all the recommendations found both on the HP site and here in the Apple Forums. I print fine. Can't for the life of me figure out what the problem with the now lost again Scan function is.
Only strangeness I can think of is the following: When setting up the network(s), I had the option of naming the 5 ghz band something different. I set mine up with the same name of the 2.4 ghz network with 5ghz in parenthesis (i.e. BobbyG and BobbyG (5 Ghz)).
Sorry for the long post but we need the scan function in the house for my wife's teaching purposes. Any assistance would be GREATLY appreciated.
Very Respectfully,
Bobby G.

Similar Messages

External Combo Drive doesn't work after installing Snow Leopard

This Mini was bought used with a defective combo drive. I purchased a "No-Brand" external Combo Drive (USB connected and powered) off eBay. Everything worked fine under Leopard. I used the external drive to install Snow leopard but could not eject the DVD at the completion of the installation process. I manually ejected the DVD and discovered the external drive now doesn't work with either DVD's or CD"s.
Any ideas what the problem is?
Ken

Mark this up to "cockpit' trouble on my part. The external combo drive now works.

IWork is all white and doesn't work properly with Snow Leopard

Whenever I open Pages or Numbers 09, everything is displayed as white. The text colour is black but I can't see the blinking text mouse icon (which looks like I). I can open templates and can only see the text when I highlight it otherwise the screen is white and I cant even type in a blank document. It all worked fine until I installed Snow Leopard.
I had similar problems with iMovie and iDVD 09 with transparencies not working. Could this be a problem with the graphics driver for my Nvidia 8800 GT? Or is there another way to fix it?

Apple's instructions are:
*Transferring files from one account to another on the same Mac*
*You can use your Shared folder:*
1) Log in to the account you wish to copy files from.
2) In the Finder, navigate to the Shared folder. It is located in the Users folder.
Copy any files or folders you wish to the Shared folder, such as items on your desktop, in your Documents folder, in your Music folder, and so forth. You may be asked to enter an administrator password when copying certain items. Note: To ensure that you copy items (as opposed to moving items), hold the Option key as you drag files to the Shared folder. Depending on item permissions, some files or folders will copy by default, some may move by default.
3) Log out of the current account.
4) Log in to the new account (that you are transferring files to).
5) In the Finder, navigate to the Shared folder. It is located in the Users folder.
Copy any files or folders you wish from the Shared folder to the desired locations, such as desktop, Documents folder, Music folder, and so forth. You may be asked to enter an administrator password when copying certain items.
And I'll add an additional step and a warning:
6) Having copied the files to the new account, Get Info, and change the ownership of them to your new account name. The easiest way to do this is to select each folder inside the user folder (ie Documents, Pictures etc). These should have the permission set properly to the new account owner. Click on the gear icon and select Apply to Enclosed Items
The Warning
It is safe to copy the contents of your Documents, Pictures, Music, Movies and Sites folders but since the problem is likely to be inside the user Library folder it isn't a good idea to copy it. You can probably safely copy your Safari bookmarks (not the entire Safari folder), Calendars, and Mail (but open the folder and delete the Bundles folder inside because it contains Mail plug-ins which might be the problem). I'd be very leery of copying any more than this since doing so might copy the problem into the new user folder. I often copy a one or two items from the Library folder at a time, restart, and then if all seems okay, copy a couple more. But I never copy the Preferences which means re-serializing a lot of programs and one or two programs might need to be reinstalled. The Applications Support folder is another one that may not be safe to copy over, but then again may be. It is one that I move into my new Library folder a couple folders at a time.
In short, moving items into the new account via the Public folder is, itself quite easy though you do need to be sure to that the ownership gets changed to the new account. As I said, the data is easy and safe. The Library is where the problems tend to be.
Incidentally it might seem easier to keep the old account and just moving the user Library elsewhere since that's where the problem is living. I've found that it isn't such a good idea for a number of reasons. Copying to the new account may be more time consuming but safer and in the long run better.

HP Officejet 7410 All-in-One no longer 'automatically' print double sided

After upgrading my PC from Windows XP 32-bit to Windows 7 64-bit my HP Officejet 7410 All-in-One printer no longer prints double-sided automatically. When sending something to print I am presented with only two options: Print One-Sided or Manually Print on Both Sides. If I choose the latter I have to manually reload the paper when prompted. I have tried searching for updates and downloading drivers but nothing has resolved the problem. I've even gone into printer properties printing shortcuts and changed the settings in "Print on Both Sides" to 'automatically' and still I am prompted to reload the paper. It is a real pain when I have to print a very large slide pack especially when the printer decides to pick up two sheets at the same time. I have spoken to HP and they say my printer is old and they cannot help me. It is about 8-10 years old. Any advice would be gratefully received.

Hello Toosweet
In Printer Preferences make sure the duplexer is enabled. Do you have the full feature software installed?
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Uninstalling the drivers and programs for Windows 7 SP1 64 bit of the OfficeJet 7410 All-In-One

Hi
Which utility should be used to properly and completely uninstall the drivers and programs for Windows 7 SP1 64 bit installed with the OfficeJet 7410 All-In-One printer?
Thanks
Bye
balubeto

Hi @balubeto
I located a software removal utility for you but if you have other HP printers or scanners you may perform the more basica uninstall.
Software and Driver Removal Utility
Uninstalling the Printer Software (more basic uninstall)
I hope this resolves your inquiry.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

My iPhoto doesn't work after installing lion?

My Iphoto doesn't work after installing lion.
it suggest that I have to instal iphoto again.
where can I find this

If it suggests that you install iPhoto again, install iPhoto again. In your Macs Box that it came in there should be 2 Discs, one is an Applications CD (You need this one) And another is the Mac OS X.
Insert your Applications CD and hold C while the computer is starting up, then you will be walked through the installation of Applications.

After installing Snow Leopard I can no longer "save photos on computer" after inserting a memory stick to an HP Photosmart C5180 All in 1 Photosmart C5180 All in one

Hello,
When I insert a memory stick into my HP Photosmart C5180 All in one and I try to "save photos on computer" the printer reads: "You need to install device software". This all started happening after I installed Snow Leopard on my Mac 10.6.8. Can someone please advise on what I need to do?

Typically it's a good idea to uninstall any devices attached to the Mac before doing an upgrade. This prevents problems that can be caused by the upgrade. Below are the instructions for uinstalling and reinstalling the printer. I'm also going to include a link to the full feature software and drivers for the printer. Let me know what happens.
Uninstalling the Printer Software
Installing the Printer Software in Mac OS X v10.6 Snow Leopard for a USB Connection
HP Photosmart Full Feature Software and Drivers - Mac OS X v10.6
I am a printer tech for HP.

My computer states HP officejet 7410 all in one no device found

went to hp driver, did a find hp, on hp website, did the download for product, HP solution center on desk when I click it pop up says No Hp devices have been detected HP solution center will close now ok In control panel under scanner and printer folder it has 1 icon HP officejet 7400 series with a green check and Ready next to it. Not only am I trying to get computer to work with solution center am trying to make wireless Can anyone help?

Hello there! Welcome to the forums @CFHPhilly ,
I read about the issues you're having with installing your Officejet 7410. Could you check the instructions in the guide below to ensure you have set up the printer the way the guide recommends? If not, please try out those steps and if you run into any issues, let me know what they are exactly and also which operating system you are running on your computer.
Installing the Printer Software on a Wireless or Wired (Ethernet) Network
Best wishes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I am not able to scan on my Officejet 7410 All-in-one

I run the HP Print and Scan Doctor finding and fixing scan problems and it keeps getting hung up at the point where is says that there is a registry problem found with device registration and it says I should unistall and reinstall the software from the Full Feature Software from Customer Care (recommended) which I have done 4 times and it still will not scan

Hi,
Thanks for reporting the issue. There are few ways you can do scanning from the Printer
1. Make sure you downloaded latest HP software and installed it.
2. From PC, launch HP printer application (Start->Program files-HP->printer model->Hp Model series) or the solution center and double click scan link to do scanning
OR
3. Any third party applications like Paint program, click file and choose insert the image from scanner.
4. If it is connected via network, then you can use your browser to make scan, Here is the video
http://www.youtube.com/watch?feature=player_embedded&v=HbWpgww5I-M
If any of above option doesn't work, then download the print and scan doctor application and run it.
Here is the location: http://ftp.hp.com/pub/softlib/software12/COL44841/mp-120776-1/HPPSdr.exe
Happy Printing
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Hp officejet 6110 all in one printer wont work!!!! i need help!!!!!!!!

i turn on my printer and it says that i need to remove and check my cartridges. i did that a million times and it still says that same message. i dont know what else to do. any suggestions??? also, i dont know where to get a connection for my labtop to connect to my printer. where can i get it???

Hi,
There is not a scan driver for the 6100 for 10.6/10.7. The product was released in 2004, and reached end of life in 2008 (a year before 10.6 was released). Chances are that a driver will not be written for this product.
I don't have a 6110 here that I can test with, so all I can offer are steps that I would try given the opportunity.
One thing I noticed from your response on trying the 6210 driver was that the product (in the queue) was still showing as the 6110. I am curious as to how you went about installing using the 6210 driver. I can only think of two scenarios off the top of my head:
1) You had the 6110 installed, went to options and supplies, to the driver tab, and specified the new driver.
2) You had no products installed, and when you went to add, you specified the 6210 driver in the Print Using box prior to clicking add.
The option that is more likely to provide the scan option is option 2, so if you haven't tried it, I would encourage you to do so. If that doesn't work, try other Officejet All in one drivers, or consider upgrading if none of the above will get it to work.
I understand that the lack of a full feature driver is frustrating, but most (if not all) companies have dates in place to cut off development/support for their products. A similar scenario is the Netgear FA311 Network Interface Card. I remember using one of these cards back in 2000/2001, but if I wanted a windows vista 64-bit driver i'd be out of luck. I'd likely end up using a realtek driver (per a forum post suggestion) and see if it would work, and hope for the best.
Best of luck, I hope option 2 (if not already attempted) gets it working for you.

Wireless printing on the HP2540 all in one doesn't work with my Mac computer

I have reinstalled the HP software 4 times but my MacBook Pro with the latest Lion OS will not print wirelessl with my HP 2540 All in One. Does anyone know how I might get this working?

Hello Seraphim8,
Welcome to the HP Support Forums! I understand you are having some problems getting your HP Deskjet 2540 connected wirelessly to your Mac running the Lion OS X.
I would like you to start here: 'Unable to find printer' Error Message Displays on the Computer During a Wireless Network Installati...
Please follow ALL steps listed and remember not all wireless routers support Bonjour or all of Bonjour's features. Since Bonjour is the default method for discovering printers on a network, you must first make sure that your wireless router supports Bonjour.
The document will help you determine if your router is compatible with Bonjour. Let me know the outcome, I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Hallo! I have Pavillon 5 with internet key.My new printer all-in-one doesn't work in web mode.

hi! my new web printer doesn't work in wireless mode. Pheraps is necessary a router? Thanks to everyone can help me! :-)

Hello maggio63,
You would definitely need to set up a network on a router with a modem for internet connection.
Once this is setup, you can follow this link to enable ePrint.
http://h71028.www7.hp.com/hho/us/en/ep/articles/setting-up-mobile-printing.html
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

The fax function on my c7280 all-in-one printer ceased working since installing windows 8....?

Product: hp photosmart c7280 all-in-one printer,fax, copier,scanner. I recently bought a new desktop (lenovo) with windows 8 pre installed. My printer prints, scans and copies but now refuses to fax. The compatibility centre for windows 8.1 tells me that my printer is compatible with the new os and na action is required...Any suggestions??? Tks

Hello there! Welcome to the forums @francojuve ,
I read about how you can no longer fax after upgrading to Windows 8. I have a couple of my own suggestion that might help!
1. Uninstall the Printer Software
2. Restart the PC
3. Reinstall the driver for Windows 8 here: HP Photosmart Full Feature Software and Drivers
Also, try the troubleshooting steps from this guide: Cannot Send or Receive Faxes
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you, such as a replacement or trade in. If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada region,: click here.
Best wishes to you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Launchpad Gestures doesn't work after install Lion

Hey people, I have this problem, after install Lion all gestures works properly, but Launchpad and Show desktop doesn't work even with the option in the Trackpad enabled.
Anybody can help me please.
Kind regards.

Here are my best suggestions for your camera problem:
• If Apple's http://support.apple.com/kb/HT2090
   suggestions do not help you, continue with the following.
• Use Disk Utility to repair permissions and then
   download and apply the 10.7.2 Combo Update:
     http://support.apple.com/kb/DL1459
• Repair permissions again immediately following the system restart
   that completes the Combo update.
The Combo version of updates can sometimes correct
strange problems like yours.
For camera problems in web video, you may need to update to the current version of Flash: http://www.adobe.com/software/flash/about/
If you need to update Flash, follow Adobe's instructions and uninstall your old Flash before installing the new one: http://kb2.adobe.com/cps/908/cpsid_90893.html

Internal Microphone doesn't work (after installing Boot Camp 3.1)

I have installed Boot Camp 3.1, and after this installation, my internal mic doesn't work (ONLY IN WINDOWS XP).
I tried to fix the problem with several manners (hardware test in CONTROL PANEL / SOUND .../ VOICE TAB / VOICE RECORDING; reinstalling drivers and hardware etc), but I can't get success (for example, the test results: SORRY, NO SOUND IN MIC...).
On the other hand, when I boot as Mac (Snow Leopard), I can use the mic (in skype, for example), without problem.
I note that ear plug (connector in the back of the iMac) doesn't work too.
Somebody can help me in this case ?
Regards
JGFilho

i got a macbook pro, 2 weeks ago, the 2.53Ghz unibody aluminium, the desing of this mac is great even tough the system specs are really low for the price actually, im happy with it(the hardware)...
The only reason i got this is cause apple claims to support windows, i like Mac OS, but i work on windows i need it... if theres no windows capability in mac i wouldnt ever buy one, so this issue is really bothering me A LOT. my impresions about apple are changing after seing this topic filled with questions and not a single moderator answer, go and check a logitech forum and see how they take care about user problems.

HP Officejet 7410 All-In-One Doesn't work after installing Snow Leopard

Similar Messages

Maybe you are looking for