HP Officejet Pro 8500 A909a_ Scan with HP Solution Center doesn't work

Hallo.
My name is Michele.
I can't use HP Solution Center for scanning with my HP Officejet Pro 8500 A909a (I have windows 7 O.S.) because, when I click on "Scan document" , a white error windows appears and says"Necessary Component is not founded or not correctly installed. Install again HP Photosmart software" . I uninstalled and installed again the software but it doesn't work. Previously it worked with XP. Recently I've updated XP with Windows 7 and I found HP Solution Center doesn't work. Perhaps it doesn't match with Win 7?
Thank you to everyone who wants help me
This question was solved.
View Solution.

Hi Folks,
I appreciate the time you have taken trying to resolve this issue. I was able to do some more research, and found a helpful solution, please click on the link below to get started:
The HP imaging device was not found... -Error popup
Please try the recommendation and let me know the outcome.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

New IPad airprint does not find Officejet Pro 8500 A909g series with DLM1FN1006BR firmware

Does the Officejet Pro 8500 A909g seriea with DLM1FN1006BR firmware accommodate airprint on the new IPad? If not, is there some fix?
This question was solved.
View Solution.

No, your printer is not AirPrint capable and cannot be. You can try other printing apps, like HP's ePrint Home & Biz.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet Pro 8500 wireless Networking with LINKSYS WRT54GS wireless router

I have a HP Officejet Pro 8500 wireless printer conneted via WiFi to my LYNKSYS WRT54GS wireless router. I do not have a USB cable or ethernet cable plugged to the printer. I am able to use the 'scan to email button' and the 'scan to network folder' button on the front of the printer and I can pint from the PC to the printer with no problems.
I installed the HP printer software from the CD, choosing network/wireless connection, without having to install any USB cables from the PC to the printer in the process. many posts in the forum mention having to connect USB cables in the wireless installation process.
Can I install the software in the same fashion on the other two laptops? Or, do I need to do something differently?

The USB cable is used on those printers which do not have display or front panel wireless setup is not possible. We configure the wireless settings during install and save those settings in printer's memory by transferring through USB cable. Therefore the USB is plugged in during wireless installation temporarily. In your case I don't think plugging in USB cable is necessary as the printer is already on network and had IP address. Connect the laptops on wireless network and proceed with regular install, the printer should be detected automatically.
Thanks
Naveen K
HP Support Engineering Center
Click on BLACK STAR button to say thanks
(Although employed by HP, I'm trying to address the issues with my sole willingness and my employer does not bear any liability for my responses)

HP OfficeJet Pro 8500 A909a - scanning stopped working in Windows 8

I'm using a HP Officejet Pro 8500 with Windows 8, connected via Ethernet. I was having a scanning issue with Windows 8 when I first upgraded from Windows 7 a few months ago that resolved when I reinstalled Windows 8 completely, but now it seems tha the problem is back. It was scanning fine until a few days ago, and when I tried then, the printer said "No scan options - refer to device documentation." When I open up HP Solution Center, it says "HP Officejet Pro 8500 A909g Disconnected!" even though it continues to show me my current ink levels. I can still print, but scanning does not work. There doesn't seem to be any issues with how the printer appears in Device Manager and Printers and Devices.
Sometime in the last 10 days, right around the time that scanning and HP Solution Center stopped working, HP Update downloaded an update. Does anyone know if this is related to my scanning issue, and more importantly, how do I get this thing working again?

Hello,
Please uninstall the existing software, and then download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the white star under my name.
Click "Accept as Solution" if it solved your problem, so others can find it.
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HP Officejet Pro 8500 A910 Scan to email failure Error Server Failure Try again Later message

HP Officejet Pro 8500 A910n ( CM758A ) Scan to email failure Error Server Failure Try again Later message
Ran HP Print & Scan Doctor - finds no problems. When sending a scanned document to the user email it has " Error Server Failure Try again Later " message . Can run test to the scanner without any errors. Tried to reset the printer - same result.
Any help would be much apreciated. AHuber

Hello there! Welcome to the forums @TheShadow42 ,
I read about the scan to email issue you are having and I will gladly try to help you! I would suggest checking your scan to email settings from the EWS, and perhaps run the scan to email wizard again. You should also see a scan and test option in the setup.
Here is a link to the User Manual, that has quite a bit of great info. Check out page 62 for the scan to email information.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet Pro 8500 prints slow with Lion. One page every 1.5 to 2 min. Apple support offered no help and HP unable to help. Any suggestions?

HP Officejet Pro 8500 Wireless prints slow with lion. One page every 1.5 to 2 min. Apple support and HP no help. Any suggestions?

Although printer is wireless capable I have it connected directly to iMac via USB to help with speed. I just completed resetting printer and reinstalling to no avail, still approx 2 min to print one page.

How to set up HP OfficeJet Pro 8620 to scan with Mac OS 10.10

How do I set up my HP OfficeJet Pro 8620 to scan using Mac OS 10.10. Installed all the software that comes with the printer.

try downloading the hp printer driver 3.0 from Apple.com. restart your computer then try again,

Maverick HP Officejet Pro 8500 Wireless - Scan is black after saving

it seems to be a common issue that after a major release upgrade the same issues come up again which are already solved in former releases. It's a pity that there is no learning effect.
After my upgrade to Maverick the Wireless AnyConnect VPN didn't work (always an issue after major release upgrade) and the HP scanner did scan well but when you save the document it's only a black sheet of paper. When you try to move the scanned document to another program there is only fuzzy printing on a white sheet.
Any solution?

There is a way to launch the scan application directly.
Go to c:\program files\hp\digital imaging\bin and double click on hpiscnapp.exe
See if you are able to complete a scan this way
If that doesn't work,
Rename the twain folder:
Navigate to C:\Windows and double click on it
Scroll down to the twain_32 folder, and rename the folder twain_32 old .
Then, Delete the whole Digital Imaging folder in the program files above and then do an install/reinstall which will repopulate the folder. NOTE: If you have multiple HP imaging devices (other printers, scanner, or cameras) Do not delete the Digital Imaging folder or you will need to reinstall those items.
I was an HP employee.
Kudos are appreciated if I have helped you.

Officejet Pro 8500 Wireless All-In-One Windows 8 driver not working

Hello!
I recently got a new Dell Inspiron computer running the 64-bit version of Windows 8, and I have an Officejet Pro 8500 Wireless All-In-One Printer from a long time ago. I don't have the disc version of the driver, since I purchased the printer before Windows 8 came out, so I tried to download it from the HP website. Whenever I try to run it, however, it says that it is extracting, but once the extract is finished, nothing happens. The Installation Wizard doesn't pop up, and there is no error message explaing it. Help please?
Thanks!
This question was solved.
View Solution.

Hi,
Can I check if your Officejet Pro 8500 is A909 or A910? Alternatively, you can install the class driver built into Windows 8 to print to your printer. There are also a couple of Windows Store apps (HP AiO Remote and HP Scan and Capture) that would work with your printer.
I work for HP.

HP Officejet Pro 8500 A909g - scanning

I am running windows 7, 64 bit OS, and and have a wireless 4 in 1 Printer, copier fax and scanner HP Office Jet Pro 8500 A909g. I can print fine to the printer as it prints to an IP address 192.168.0.04, but when I try to scan a document it won't complete the operation because it says it can't find the scanner. When I click on the Scan router it tells me it is set for an IP address of 192.168.0.02, and there appears no way to amend that to 04. Anyone suggest anything, other than uninstall and re-install the 4 in 1? I have used the HP print and scan doctor to no avail!

Hi there,
I understand you're having an issue scanning with your Officejet 8500 A909G printer. I'm sorry to hear this has been happening to you, but will certainly do my best to help!
When you ran the HP Print and Scan Doctor, were you able to run the Fix Printing and the Fix Scanning functions?
Did it give any errors at all? Or did everything check out okay?
Once I have this information I should be able to instruct you what to try next.
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Officejet Pro 8500 A909g Scan-To-Network-Folder Problem On New Dell Optiplex 3020

I hope that I am posting this issue to the correct board.
I recently purchased a Dell Optiplex 3020 64-bit desktop running Windows 7 Pro. My home network now has the old HP printer and my original 2003 vintage Sony Vaio XP Home 32-bit on wired connections. There is also an HP Notebook 64-bit running Windows 7 Home, using a WiFi connection. I replaced a Linux clone (which had connected ok to the printer) with the new Dell on the same wired connection.
With the other 2 PCs, I was able to set up Scan To Network Folder using the original HP software with no problems. I used a current setup file from the HP site to set up the Dell. The file is: "OJP 8500vA909_Full_14 HP Webpack". The Dell prints fine, but when I try to set up the network scan folders on the Dell the setup stalls and I get a request for an SSL certificate. I don't know if this is being generated by the OS or by the HP setup file that I downloaded. I can't figure out how to get the network folders to work on the new Dell, and I know next to nothing about SSL.
To be clear, the old Sony is a 32-bit Windows Home Edition, the HP notebook is Windows 7 Home 64-bit, and the new Dell is Windows 7 Pro 64-bit. Any suggestions will be appreciated. Sometime soon, the Sony will be retired and the OS environment will become much simpler.
While I'm at it, I probably should update the printer firmware. However, my guess is that I should wait to do that until the old 32-bit Sony goes out to pasture.
TIA for any advice and suggestions.

Hi Alla-guy,
As far as I know, you have posted your issue to the correct board, now let us see what we can do to get it resolved
I will answer your easier question first, in regards to the firmware. You can update the firmware whenever you are ready! You don't need to wait for the other computer to reach it's end, as the firmware is just within the hardware of the printer and shouldn't affect anything software wise on the computer, so go ahead and update the firmware when you have a few minutes!
As for the setting up to scan to a network folder, it is odd that it's asking for SSL, do you know if you're the administrator on the new computer?
I realize the instructions in this Set up and Use Direct Digital Filing for Windows document are for setup, but still have a look and make sure that is how things were going for yourself. Also, it may be a good idea to check any firewalls or anti-virus that you have and temporarily disable any firewalls or programs that could be blocking things over the network.
Let me know how this goes for you!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Scanning with HP Photosmart B110 doesn't work since upgrade to 10.6.5

I have a problem here on my HP Photosmart B110a: I can no longer scan via my iMac since I upgraded to 10.6.5. Same story on my MacBook Pro with 10.6.5
I do have an older MacBook still on 10.6.4 which can still scan, so it's clearly an issue in 10.6.5
This printer is a wireless printer, but I tried both via USB and wireless with the same result.
Anyone else with the same problem, and hopefully a solution?

Yes, I experienced this issue today, too
And it does not depend on having a USB or a wireless connection to the printer.
Until either HP or Apple (or someone else) comes out with a fix, the quickest workaround to scan should be to use the printed embedded browser controlled scanning-feature. Just browse to the IP-address (or local name) of your printer. Quite amazing, what this tiny piece of plastic has to offer ...
Cheers!

Hp officejet pro 8500 wireless a909g scan with Windows 7

I have been using HP officejet pro 8500 a909g wireless with windows xp with no problems scanning. I got a laptop with windows 7 64 bit and cannot scan to the computer from the solution center software on the computer or from the display on the unit like I used to be able to do. When I try to scan, it says that it is scanning and then quits after a short time. Nothing happens with the scanner. The Solution Center also sees the document is loaded. I have tried the scanning software program to see if something is wrong but it says all is fine. What do I need to do?

There is a way to launch the scan application directly.
Go to c:\program files\hp\digital imaging\bin and double click on hpiscnapp.exe
See if you are able to complete a scan this way
If that doesn't work,
Rename the twain folder:
Navigate to C:\Windows and double click on it
Scroll down to the twain_32 folder, and rename the folder twain_32 old .
Then, Delete the whole Digital Imaging folder in the program files above and then do an install/reinstall which will repopulate the folder. NOTE: If you have multiple HP imaging devices (other printers, scanner, or cameras) Do not delete the Digital Imaging folder or you will need to reinstall those items.
I was an HP employee.
Kudos are appreciated if I have helped you.

How can I Send a fax directly with HP Officejet Pro 8500

Hello
I have a printer of the type
hp officejet 7100 series
When I want to send a fax directly, a text document, for example, type it on the printer
hp officejet 7100 series fax
And converts it to a fax machine directly.
Now I buy a new printer
HP Officejet Pro 8500 A909g Series
I want to do the same work.
But there is no print on the fax.
I had to I do a print of the file manually and then sent through the printer
I want to resolve the issue
Send a fax directly

Just to make sure, this is how the process of faxing from Word is supposed to work, in general terms:
1
Create and save a Word document. You'll need a saved file on your computer before you're able to fax it.
2
In Microsoft Word, you can use the Fax Wizard to fax your Word document if you have Word and an Internet connection capable of doing so.
3
Click "File," then "Send To," then "Fax Recipient." This should open up a Fax Wizard window separate from the window of the document.
4
Follow the onscreen instructions of the Fax Wizard. If your computer is not capable of sending faxes, the Wizard will indicate this.
5
Enter the file, recipients' names and numbers and information from your coversheet. Click "Finish" at the bottom of the window.
6
If your computer is for some reason not capable of using the Microsoft Fax Wizard, you'll need to download a different Internet fax program from the Web.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

HP Officejet Pro 8500 A909a Print Cancelled when printing borderless A4

Hi
We have an HP Officejet Pro 8500 A909a that normally works very well. We need to print a brochure in full colour on A4 borderless and the printer starts printing and then cancels the job itself after printing about a fifth of the page. I have tried all different printing options and it works fine if there is a print margin but will not work for borderless. This applies to printing from all different applications (Microsoft and Adobe).
We urgently need to print the brochure so a speedy resolution would be gratefully received.
Thanks in advance.

I am having a similar problem printing a two-sided 3-fold brochure in full color. The first side prints normally, but the second side prints two fo the three panels and then printing cancels on the third. I am printing from a Windows 7 laptop over a Wifi connection onto an HP Officejet Pro 8500 Wireless printer. A solution would be much appreciated!

HP Officejet Pro 8500 A909a_ Scan with HP Solution Center doesn't work

Similar Messages

Maybe you are looking for