Hp officejet pro8500 a910 shoots out blank paper when trying to print from windows 10 installed firefox. Printer works fine from chrome and ie.

I am beta testing windows 10. I use both a hp laptop (dv77128nr) and a desktop (home made). I use a hp officejet pro8500 a910 printer.
When using firefox I get only blank pages while trying to print from within the browser. Only using firefox. Chrome works fine. IE works fine. If I boot to windows 7, firefox works fine. Can you help or should I report this to Microsoft?
Thanks for your help.
ps. Tried resetting firefox. Haven't tried a new install.

Firefox isn't officially supported on Windows 10. For that matter, Windows 10 isn't officially supported either. This is most likely a problem between Firefox, Windows 10, and your printer's driver. Try updating your printer's driver and see if that helps. Otherwise, it might be a good idea to post this on Microsoft's forums as well.

Similar Messages

Why does printe print test page ok then shoots blank paper when trying to print from MS Office word?

Why does my printer (HP Deskjet 2050 j510) print a test page ok but when I go to print a paper I typed in MS Office Wrd it shoots out blank paper? What an I do?

Hello,
How are you connected to the printer, USB or wireless?

The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

Hello gokulaan, '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

My HP Photosmart C4780 just shoots out blank pages when I try to print anything from the internet.

I'm using Firefox 9.1 on Vista 32-bit home premium. I've tried re-installing all the printer drivers and software to no avail.

Try the '''''reset''''' described here: <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

Hp officejet pro 8500 a909a frequently shows out of paper when it is not.

hp officejet pro 8500 a909a frequently shows out of paper when it is not. I am .getting rub marks on the top sheet of paper from the rollers.

Your response to my question seems to reflect a rude attitude simply because I asked this question. In response to your response, I have no manual, and the first place I went for info was the HP website - and I got you.
There are three things that I need from you, and none of them is a sarcastic rude attitude. Please provide me with the following information:
     1. Information on how to clean the rollers.
    2. Your name/employee i.d.
     3.  How to contact your supervisor.
Thank you,
B. Van

HP PSC 2175 spits out blank paper while I print.

I have Dell GX520 Desktop PC with Windows XP service pack 3 and HP PSC 2175 all-in-one printer. Since few days I m having trouble printing with my printer. When I try to print it simply picks up the paper scans it and spits out blank paper instead of printing it. There is no any error message or flashing light or any thing in the printer.
But still I can make copy or print the test page from it. The only thing is I can't print any document from WordPad or NotePad or through Adobe Reader. I don't have Office on my PC.
I have tried every thing that I can do. Uninstall the driver and reinstalled it downloading from HP website,updated the drivers manually, replaced new cartridges and what not. But I still have the problem. It would be so helpful if you have any solution to this problem.

I'm having the same problem....
The computer is a hp pavilion.
When trying to print, It loads the paper, It checks the paper position, then it just ejects the paper.
I opened the print job que and watched it.
When the print job ques up, it shows the job...then deletes the job before printing it.
It has been working fine up until a few days ago.
Any help would be appreciated.

My printer xi all-in-one) says its "out of paper" when it is Not. And will not print?

What's wrong with my printer? "Out of paper" error message is incorrect.(HP officejet 4215)

Hello marennad,
I am sorry to hear that you are having problems with your printer saying it is "out of paper" when it is not. If you would like my help, I would like for you to respond with some more information so I can better research this issue.
Please reply with:
Your Printers Model Number
Which OS you are running, Windows or Mac
Which troubleshooting steps have you attempted so far to help correct the issue?
I look forward to hearing from you.
Take care,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My computer says i am out of paper when i am not

my computer shows its out of paper, when its not

Unie,
If your Printer indicates the error, then what you do depends on your printer's model.
You can look up the troubleshooting tips for your printer:
Open HP Drivers & Downloads
Enter your Printer Model information
Select your Printer from the “Results” list
Open tab "Troubleshooting" > Select Solve a problem > Jam and Feed Problems >
Select An 'Out of Paper' Message Displays ...
The exact wording may vary. The point is to find the document that most closely matches your situation.
Click the Kudos Star!
It is a nice way to say “Thank You” for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

Firefox 4 search bar and "Tips" bar are blank windows that do not work. Removed F4 and downloaded again three times but no joy. Gone back to F 3.6.17.

On Firefox 4 home page the "Tips" bar and search bar above it
are both blank windows. The search bar does not say Google on left side. I can type in search bar but when I click on search nothing happens. ( Desktop XP Pro)
On my Laptop (XP home edition) Firefox 4 works fine and I have not found any faults so far.
It's a shame losing RealPlayer downloader for YouTube. I have to go to IE for that.

Seems that may have worked and that's great, thank you. But now I have another problem which seems to be as persistent as the search bar has been.
Now when I edit the bar and position of the buttons some of those buttons disappear when I click Ok in the customization, but reappear when I reopen the customization settings.
Why is that? When I put a space in between some of the buttons the buttons near the space will disappear and leave a blank space where it should be.
I'm beginning to be rather annoyed with this Firefox Beta to say the least and am considering returning to the version before it. Whatever I do now as far as customizing is concerned of the toolbar is reset every time I reopen Firefox. The buttons are no longer where I had set them up, the address bar is stretched to it's maximum, the Menu Bar is back the far left edge, buttons are missing that I had put there, and buttons I had removed are returned.
:| I know it may seem insignificant to some people but it annoys the crap out of me. I understand this is a beta and if there is no solution then I perhaps will use the earlier version for a while.
Thanks for your input by they way, it's much appreciated.

I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

Your previous tabs will not re-open or be available to re-open when starting Firefox if:
*your previous session was in Private Browsing mode; see --> http://support.mozilla.org/en-US/kb/Private+Browsing
*you use Clear Recent History (''Firefox button > History > Clear Recent History'' or ''Tools > Clear Recent History''); see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-clear-my-history
*you clear History automatically when closing Firefox; see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-make-firefox-clear-my-history-automatically
NOTE: Your third-party Plugins (Add-ons > Plugins) are not in the "Application Basics" (Troubleshooting Information) in the "More system details" of your original post. Third-party Plugins are categorized separately in "Installed Plugins" under "More system details". You should review but not change the Plugins as detected automatically by the software on this forum when posting a question.
If you problem still exists after checking the above, the problem could be caused by one or more of your Extensions or Plugins:
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
*See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card

I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.

Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
G5 PCIe options are listed here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html

I had to change my Hard Drive, now I want to work on files in iWeb, but can't access Time Machine before yesterday. The dates are there on the right hand side but are greyed out before yesterday when I changed my HD. How do I access anything from before.

I had to change my Hard Drive, now I want to work on files in iWeb, but can't access Time Machine before yesterday. The dates are there on the right hand side but are greyed out before yesterday when I changed my HD. How do I access anything from before?

Start with B5/6 in the 1st linked article.
Time Machine Troubleshooting
Time Machine Troubleshooting Problems

Blank page when trying to go to login from alliance-leicester site

blank page when trying to login from alliance&leicester site
== URL of affected sites ==
http://alliance-leicester.co.uk

Do you have any addons that may disable scripts?
Try [[Safe Mode]]

Anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

Hi, couple of things to try...
Anonymous
Post subject: NSURLErrorDomain error -1100 in OS X 10.8
If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
http://x704.net/bbs/viewtopic.php?f=12&t=6130
I was recently trying to upgrade to mountain lion through the app store. I have unreliable Internet from a cable company whom I will not name, but we all know who they are. My Internet dropped while downloading the upgrade. Once I went through the notorious unplug the modem/router and plugged it back in to gain Internet connectivity again, I could not resume. No matter what I did, the app store kept displaying "an error occurred." I am hoping that those with the same issue read this first to save them hours of skimming through the Internet to find a solution. Here are the steps to take:
1. Make sure you have reestablished Internet connection
2. Chances are you got frustrated when you tried to resume/unpause the download and clicked the "X" to the left. If so, select the "Store" drop-down menu from the App Store and select "View My Account." There should be an option to unhide your purchase. You know what to do.
3. There is also an option to reset all warnings for buying and downloading under "View My Account." Do this, click "Done," sign out of the App Store and quit the App Store.
4. Open the Preferences in safari and select Privacy. Select "Remove All Website Data." Just do it.
5. Launch the app store and sign in.
6. Now, if you "Check for Unfinished Downloads" everything works peachy.
I hope this helps. Not much I can do for your Internet connection though.
JonEz15...
https://discussions.apple.com/thread/4697970?tstart=120

Ora-04030 process out of memory when trying to allocate nn bytes..

Hi,
Again we are facing the same error after increasing pga_aggregate_target from 2G to 3G, the journal import program request finally results in ora-04030 process out of memory when trying to allocate nn bytes.
wiil there be any bugs issue?
DBMS:9.2.0.3
OS :sun sparc 5.10

IF possible try to apply last patchset to take your DB to the latest version which should be more reliable and many bugs should be solved.
Do you have free physical memory to use the 3gb?
Hope this helps.
Regards.
FR.

Hp officejet pro8500 a910 shoots out blank paper when trying to print from windows 10 installed firefox. Printer works fine from chrome and ie.

Similar Messages

Maybe you are looking for