HP Photosmart C6380 not scanning or photo printing with Windows 8

Just purchased HP M6/1125DX/15j with Windows 8. My current HP printer is an HP Photosmart C6380 All In One. The printer does work but the photo part and scanning icons no longer appear that were on my desktop before. I tried to download the whole program that said would update my printer but after 6 tries at an hour each, at the end it just said my download was cancelled. Is there any chance my printer will be supported by Windows 8 and how do I do that if I can't download. Or am I stuck buying a new printer? Thanks
This question was solved.
View Solution.

Hi,
The C6380 is supported in Windows 8 and has a Full Solution Download. I would try using the Print Install Wizard to help download and install the drivers.
Try this link for the Print Install Wizard.
Print Install Wizard
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

Similar Messages

Deskjet 930c does not do double sided printing with windows 7

We have just obtained a new machine with Windows 7 and connected the existing Deskjet 930c via a usb cable.
Under windows XP it was possible to select double sided printing and a prompt was displayed on the screen to turn the paper round.
This is not happening under windows 7. Is there something we have not done? Or is it not possible any more.
It does go through the motion of double sided printing but does not stop to change the paper.
Any ideas anyone - we do a lot of double sided printing and we hav spent hours trying to sort this out.

Please look at the HP Support page,
http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00098827&lc=ja&dlc=ja&cc=jp
Unfortunately, I could not find an equivalent page in English. This is for Win XP and Vista, but I checked
that a similar logic can be applied to Windows 7, too.
step 1 to 3 is to show property of the printer Deskjet9xxC.
step 4 is to select device setting tab
step 5: change "installable option" from "uninstalled" to "already installed"
step 6: OK
step 7: select print setting
step 8: select layout tab, and choose either long edge or short edge
that is all.
In my Japanese Windows 7 environment, when I double-click the "HP DeskJet 930C/932C/935C" icon, there are three sub items appeared. Two out of these three were used in the above steps.
Please try.
PaperlessUK wrote:
We have just obtained a new machine with Windows 7 and connected the existing Deskjet 930c via a usb cable.
Under windows XP it was possible to select double sided printing and a prompt was displayed on the screen to turn the paper round.
This is not happening under windows 7. Is there something we have not done? Or is it not possible any more.
It does go through the motion of double sided printing but does not stop to change the paper.
Any ideas anyone - we do a lot of double sided printing and we hav spent hours trying to sort this out.

HP3520 will not scan to new computer with windows 8.1

Downloaded and ran hpp1W.exe but still no connection. Printer connected just fine.... just can't scan

Well that didn't really tell us anything.
But we can't help you with your computer. We're just users, with no tech support resources. Expression Web is just a program, like any other; there's nothing special. You just have to install it after you download it.
A horse walks into a bar. The bartender asks "Why the long face?" "Because I was born into servitude and when I die my hooves will be used to make glue." It was at this point that the bartender realized he would not be getting a tip.

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either. I get an error message with multiple suggestions but none of them apply to my situation.
I am so dissatisfied with this printer. I'm sorry I got it from Amazon because now it is a hassle to return it. I will never buy another Canon.
The printer menus are confusing. I hate using it. I loved my previous Canon which finally stopped working after many years, that's why I purchased a newer Canon model. Never again. Stick with cameras.
Marcy Hotz

This note won't be as angry and frustrated as the last one...
Because I still had my old printer drivers and other applications on my hard drive, I think the application was trying to connect with the old printer. I deleted all the old stuff.
I also had several scanning applications on my drive which just confused me.
When I used the actual Canon MX922 application, I was able to scan but could only save as JPG, TIF or BMP (and one more, I forget which). So I did some research on the Canon site and found out how to save documents as PDF files using the Canon IJ Scan Utility.
It works now. So I'm satisfied, will keep this maching. I just had to take some time, sit down and focus on the problem.

When printing or scanning the copy prints with a black one inch wide stripe all the way down copy .

HP photosmart 2575 all-in-one, when printing or scanning the copy prints with an black one inche stripe down side of page but when i printed self-test page it printed fine

Good morning leetrout1. Lets try resetting the printer. Here is how we can do that:
Make sure the product is on, and then disconnect the power cord from the product.
Disconnect the USB cable from the product, and then disconnect it from the computer.
Reconnect the USB cable to the computer, and then reconnect it securely to the product.
Disconnect the power cord from the wall outlet, and then reconnect it to the wall outlet.
Reconnect the power cord to the product.
Press the Power button ( ) to turn on the product.
Let me know if this solves the issue. If not please be sure to post back with some more information like what operating system you are using, what applications this occurs in, etc.
Hope this helps!
-SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Photoshop CS4 does not recognize raw photos taken with newer cameras. Anyone else have this problem?

Photoshop CS4 will not recognize RAW2 photos taken with my new Panasonic Lumix FZ100 camera. This camera is listed in Adobe's 6.2 Camera Raw update for Photoshop CS5 but cannot be loaded in CS4. I paid a lot of money for CS4 and don't want to buy CS5 just because I bought a new camera, but it appears that Adobe no longer updates Camera Raw for CS4 or with newer cameras. When I called the Help Desk to find out if there was some kind of patch I could get to make CS4 compatible with my new camera a gentleman in New Delhi informed me that he couldn't even answer my question until I paid $40 since answering questions about CS4 was a "paid service." I hung up in a rage. Does anyone else have this problem and is there a solution?

This camera is listed in Adobe's 6.2 Camera Raw update for Photoshop CS5 but cannot be loaded in CS4.
Adobe does indeed not update obsolete versions of Camera Raw for new camera types.
And guess what: It’s the camera producers who seem to like to change their raws – so how about spreading some of your indignation their way?
I paid a lot of money for CS4 and don't want to buy CS5 just because I bought a new camera
The upgrade is cheaper than buying the full version.
Anyway, you could try the free DNG Converter which should be able to handle everything the most recent version of Camera Raw can handle.
Edit:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh&promoid= HTENC

My CS5 program does not support CR2 photo taken with Canon Rebel T5i. Why?

My CS5 program does not support CR2 photo taken with Canon Rebel T5i camera. Why?

If you take a look at the following charts, you will find that both the S110 and the T5i are not supported in CS5, both cameras require photoshop CS6 with a camera raw point upgrade, Photoshop CC or Lightroom 4.3(s110) 4.4(T5).
Camera Raw plug-in Supported cameras
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Photoshop CC indepth : camera raw - Supported cameras for plugin and lightroom
http://www.adobe.com/products/photoshop/extend.html
Camera Raw-compatable Adobe applications
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

Deskjet F4100 printer with Windows 7

I need an update to operate a deskjet F4100 printer with Windows 7

honyok,
That is a simple question, and easy to solve. Here is the link to that series.
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId...
1) Select the exact model
2) Select the exact OS
3) Download a) full feature software, updates, utilities
4) Burn all downloads to a CD.
Disconnect the power and USB cable. Install the full feature software, following the instructions.
The updates and utilities can be useful after the initial install.
I have the F4135, and needed the scan update.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

HP Laserjet p2015d auto duplex printing with Windows 7 64 bit operating system

I have used the HP Laserjet p2015d with Windows 7 32 bit operating system and have been able to use the AUTOMATIC DUPLEX feature of the printer without problems.
Now, however, I have installed the 64 bit version of Windows 7 operating system and the AUTO DUPLEX does not work and is not shown as being available on the PROPERTIES menu of the printer.
Is it possible to use the AUTO DUPLEX feature of the printer with Windows 7 64 bit operating system.
All replies welcomed! Aaron in Calif.

Hi Aaron,
Make sure the Automatic Duplexing option is enabled:
Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
Now Automatic Duplexing should become available.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Why won't my printer print with Windows 8?

Why won’t my printer print with Windows 8?
Have you just upgraded, or purchased a new computer with Windows 8, and now you can’t get your printer to work? If so, this may help you. A lot of people have questions about installing their printer on a new OS. This will help you answer those questions and make sure that you get everything installed.
Before You Start
Before you try to install the printer on a Windows 8 computer, you should check to make sure the printer is compatible with the new OS. The link below will give you a list of the printers that will work in Windows 8.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03168175&lc=en&cc=us&destPage=document&dlc=en
If you have upgraded your computer to Windows 8 form another version of Windows, make sure to completely uninstall all of the software for your printer. It should still print, but to use all the functions you will need to reinstall the software, if it’s available.
Another thing to consider is how you want to connect the printer to the computer.
USB. You should make sure that you have a USB cable that is no longer than 6 ft. (roughly 2m). Make sure to connect the printer directly to the computer. Do not use a USB hub.
Ethernet cable. Make sure you have the network setup, that you have a free cable port on the router, and that you have an Ethernet cable available.
Wireless. You should make sure that you have the wireless network setup, and that you have the password for the wireless network.
1.     Installing Via USB
Installing via USB in Windows 8 has become much simpler for HP printer users. In other versions of the Windows OS you had to start the installation and wait for it to ask you for the USB connection. If you didn’t, you would have to uninstall the printer from the Printers/Devices folder, and then start the install. In Windows 8, that will not be a problem. If you plug the printer’s USB cable in and then install the printer’s software, it will still work. Now for in depth instructions on installing the printer via USB click the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460670&tmp_task=solveCategory&cc=us&dlc=en&la...
2.     Installing Via an Ethernet Network Connection
For an Ethernet network connected printer the install is amazingly simple. All you have to do is connect the printer to the network. Once you have that done, Windows 8 will automatically install the drivers for you. Then, all you have to do is install the rest of the software, if it’s available. It’s really that easy.
http://www8.hp.com/us/en/support-drivers.html
3.     Installing Via a Wireless Network Connection.
For a wireless network connected printer the install is amazingly simple as well. All you have to do is connect the printer to the network. Once you have that done, Windows 8 will automatically install the drivers for you. Then, all you have to do is install the rest of the software, if it’s available. It’s pretty much the same as an Ethernet install, just wireless.
http://www8.hp.com/us/en/support-drivers.html
Alternate Install Methods
With Windows 8, many printers’ drivers are installed with the OS. These are known as InOS drivers, since they come built into the operating system. If you have one of those printers, all you should have to do is connect it to the computer via USB, or connect it to the network via Ethernet or wireless. Once you have that done Windows will handle the rest. There are alternate methods of installing your printer if the normal methods are not working for some reason. You can install the printer either using the Printer Install Wizard, or through Windows Updates.
Printer Install Wizard:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02681060&tmp_task=solveCategory&cc=us&dlc=en&la...
Windows Update:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460648&tmp_task=solveCategory&cc=us&dlc=en&la...
Note: The Laserjet drivers for the Asia-Pacific and Japan won’t be released until a later date. Check the support site linked below for driver availability. I will update this post once they become available.
http://www8.hp.com/us/en/support-drivers.html
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
This question was solved.
View Solution.

Hope this answers some questions.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

SharePoint Foundation 2010 - Your client does not support opening this list with windows explorer when clicking Open with Explorer

when I tried to open document library in Windows explorer view by click 'Open with Explorer', it popped up “Your client does not support opening list with windows explorer”
OS: Windows Server 2008 Enterprise x64
IE: 9.0 32bit
webcient service is runing
HKLM\System\CurrentControlSet\services\WebClient\Parameters and changed the BasicAuthLevel to 2 instead of 1.
Anybody knows how?
Thanks.

Did you add your site to trusted site list?
http://sharepoint.stackexchange.com/questions/15098/your-client-does-not-support-opening-this-list-with-windows-explorer
--Cheers

My iphone 4s (ios 7) is not recognized by my laptop with windows 7 home basic. It says device not recognized. I tried with different cables. Any suggestion??

my iphone is not recognised by my pc with windows 7 . ive tried with different cables. i tunes installed.. any suggestion?

Use this article:
support.apple.com/kb/ts1538

Your Client Does not Support Opening this list with Windows Explorer on Windows Server 2012 R2

I am trying to open a document library in Internet Explorer 11 on a Windows 2012 R2 server and I am receiving Your Client Does not Support Opening this list with Windows Explorer

Hi,
According to your post, my understanding is that you wanted to open a document library with the Internet Explorer 11 on a Windows 2012 R2 server. But you received the following error message: Your client
does not support opening this list with Windows Explorer.
There can be multiple reasons for it.
So, I recommend you can check with the following steps:
Go to the “Server Manager” of “Administrative Tools” > Enable the “Desktop Experience” feature in your environment.
Go to the “Services” of “Administrative Tools” >
Ensure the “WebClient” service is started.
Ensure that your computer has supported Web browser.
Ensure that Internet Explorer is configured correctly to add
https://*.sharepoint.com to Local intranet site in the “Security Tab” of “Internet Options”.
Ensure that
you have applied the latest updates on the system.
For more information, you can refer to the following articles:
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
http://mcgeeky.blogspot.com/2010/02/your-client-does-not-support-opening.html
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Your client does not support opening this list with windows explorer - related to multiple uploads?

Hi folks -
I've read through some threads regarding "Your client does not support opening this list with windows explorer" and it seems a lot of folks have a lot of solutions throughout the forum posts. Is there anything official or semi-official regarding
this?
I've tried a lot of the fixes including:
checking to see if the WebClient service is on
modifying so-and-so registry (I've since changed them back since they seem to have no effect)
and changing various settings in Internet Options including making sure the site is in the Local intranet zone.
I could live without this functionality but just recently my upload-multiple-files functionality in SharePoint 2010 has also gone away (red x instead of directory UI). I wonder if it's related somehow and could give us a clue.
If it helps I'm using various browsers but of the IE flavor 8 and 9 32-bit as the base for testing this.

For SharePoint 2013 (so could apply to 2010 as well), my problem was that I was trying to "Open with Explorer"
something that probably can't be opened with Explorer. In my case, I just wanted to open my team's Shared Documents with Explorer. I found that when I first log into SharePoint and view the page, I'm presented with those Shared Documents, but also other things
as well.
To get "Open with Explorer" to work, I must click "Shared Documents" under the Libraries heading on
the left. Then, all the other stuff (Links, Getting Started, etc.) go away and I'm focused on my team's shared documents. From there, I can go up to the Library Tools section in the ribbon, choose the Library tab in the ribbon, and click Open with Explorer.
Works like a champ on Windows 7 64-bit, running IE 9 32-bit.
Unfortunately that's not what was going on in my case. One obvious way to check is to see if other people or other computers can Open with Explorer. In my case it was just this one machine on my desk that had the issue.

In SharePoint 2010 Document Library "Open with Explorer" Your client does not support opening this list with Windows Explorer

Hi.
I am getting below error "Your client does not support opening this list with Windows Explorer" while click "Open with Explorer" option in document library.
My system is client machine which is 32 Bit system and
Web Client service is also running and Window 7 PC.
Other SharePoint sites "Open with Explorer" option in document library is working fine but specific site is giving error.
Even it was working fine but not is giving this error.
Please help me on it. Its making frustrations.
Thanks & Regards
Poomani Sankaran

Hi,
According to your post, my understanding is that you got “Your client does not support opening this list with Windows Explorer” error.
Did you enable the both authentication (Windows and FBA) on default zone.
As far as I remember when FBA is enabled on the same zone when Windows is used, it breaks whole client integration.
So it will be better if you will recheck your architecture and will use different zones for Windows and FBA.
There is also another thing to try: use claims based authentication with authentication provider which will work both with Windows and FBA.
What’s more, you can also check with below steps.
Use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
Add the site into Trusted sites to check whether it works..
Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
In addition, you can also try to enable Basic authentication on the client computer, by setting the BasicAuthLevel registry entry of the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
For detailed steps, visit the following KB page.
http://support.microsoft.com/kb/841215/en-us
There are some similar threads for your reference.
http://social.msdn.microsoft.com/Forums/en-US/e9a07773-db23-46e9-8d1d-7015cd5aa13b/your-client-does-not-support-opening-this-list-with-windows-explorer?forum=sharepointgeneralprevious
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

HP Photosmart C6380 not scanning or photo printing with Windows 8

Similar Messages

Maybe you are looking for