HP Photosmart Premium C309g/m

When I print picture there is a pink background to the picture. Hoe can I eliminate it?

See the troubleshooting steps in this page.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Printing problem with HP Photosmart Premium C309g-m

I'm running windows XP sp3 on all of my machines with this printer{HP Photosmart Premium C309g-m} wireless network.Recently everything starts to print one inch lower on the paper and cuts off the bottom of each document I try to print.I print mostly from microsoft word 2007,and I have checked all the settings in word.It is almost like the printer skips an invisible header then starts to print the document.Any ideas would be appreciated.

I don't think there is anything wrong with the DSL modem HW. There might be an issue with how print data is being routed though.
Please try the second experiment where you blank-out the default gateway and DNS entries from the printer's internal web configuration page. Open the printer's internal web page by browsing to its IP address. Select Networking and then Wireless (802.11). Under the IPv4 Configuration tab, select Manual IP:
For Manual IP Address, use the existing printer IP address.
For Manual Subnet Mask, use 255.255.255.0
For Manual Default Gateway, leave blank. This is important.
Select Manual DNS Server:
Leave both the Manual Preferred DNS Server and Manual Alternate DNS Server fields empty. This is important.
Press Apply.
Turn off the DSL modem, the printer and all computers connected to your network. Wait 60 seconds then turn on the DSL modem and then turn on the printer. Then turn on the computers. See if this corrects the printing speed.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

HP Photosmart Premium C309g-m unable to print ("check printer documentation")

My printer is: HP Photosmart Premium C309g-m
My computer is: Mac (Mac OS X system)
After removing a jammed paper (probably the incorrect way), I now receive a message to check "printer documentation" and then press "okay". Tried everything I could find, including uninstalling and reinstalling. Still receive same message, and still unable to print.
Can anyone tell me in very simple terms how to fix this?

Hi there chnich,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Powering Down HP Photosmart Premium C309g-m

Product: HP Photosmart Premium C309g-m
Operating System: Windows 7 64-bit
No Error Message
I Use my HP Photosmart Premium C309g-m printer or scanner and when I'm finished I go to power down or shut down the printer it will not respond. After several attempts I end up unplugging the power supply for 10 seconds and plug it in where HP Photosmart Premium C309g-m powers up automatically and then I'm able to power it down. This is not described in any areas of FAQs or found to have been posted any where that I can find. How do I resolve this problem?

is anyone able to help with this WON'T PRINT problem???????

My HP Photosmart Premium C309g-m printer frequently gives me false "low ink" readings

My HP Photosmart Premium C309g-m printer frequently gives me false "low ink" readings, which wouldn't be a big deal except that unlike other printers I've had, instead of just printing as best it can on low ink, it refuses to print at all.
I know the readings are false:
(a) because I've only recently refilled the ink - (since this started I write down when I refilled the ink and note the number of print jobs, which can be as low as 10 and the false readings can occur) and
(b) my only work around so far is to turn the printer off and on until the false readings stop, it then shows the correct ink levels and does print, but his can often take 5 or 6 times of "off and on." Very annoying.
Questions:
Has anyone else experienced this?
If so, is there a fix?
If no fix, is there a way to change the printer default configuration so it will print anyway -with low ink - instead of simply refusing to print?
Any help is appreciated.
Thank you

Maybe there is some ink on the connections to the cartridges. This document may help with checking those areas after you installed new cartridges last time:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01808074&cc=us&dlc=en&lc=en&product=3793676&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Issues with McAfee IPS and HP PhotoSmart Premium C309g-m performing port scan

Trying to run a HP PhotoSmart Premium C309g-m printer wirelessly and connect to a laptop computer with Windows 7 32-bit operating system. Printer is available for about 3 and a half minutes and then is blocked by McAfee because the printer is trying to perform a UDP port scan. The IP address of the printer is blocked for 10 minutes and then becomes available again. After about 3 and a half minutes, the printer IP address is again blocked by McAfee IPS for 10 minutes and the cycle repeats again. Goes on all day. Difficult to get any work done. Anyone have a fix to stop the port scans? Thanks

Hello JWB46,
Welcome to the HP Forums!
I understand when you scan a document, it takes longer and the background is black with horizontal white lines or a greenish background. I will do my best to assist you! First, I need to find out your operating system on your computer? Windows or Mac?
How is this printer connected? Wireless or USB?
Please make sure you have followed this entire HP document on Color or Brightness Level of Scanned Image is Not Correct. I would like to test out the hardware within your printer. Try copying a blank document on the scanner glass. Let me know if you have the same results. I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

Scan problems with my HP Photosmart Premium C309g-m

Hello
I have been experiencing a problem when I attempt to scan a Document or Photo on my HP Photosmart Premium C309g-m printer. Specifically when I scan it now takes longer to do so and when finished I save it to my deskstop but the result after saving consists or either a totally black background with horizontal white lines or a greenish background. I have tried resetting back to ‘default’ properties but nothing changes and the result is the same. I have shut down the printer, and unplugged it for several minutes and restarted it..but still no luck
Anyone out there with an answer on how I can fix this?
Thanks

Hello JWB46,
Welcome to the HP Forums!
I understand when you scan a document, it takes longer and the background is black with horizontal white lines or a greenish background. I will do my best to assist you! First, I need to find out your operating system on your computer? Windows or Mac?
How is this printer connected? Wireless or USB?
Please make sure you have followed this entire HP document on Color or Brightness Level of Scanned Image is Not Correct. I would like to test out the hardware within your printer. Try copying a blank document on the scanner glass. Let me know if you have the same results. I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

HP Photosmart Premium C309g-m on wireless for a wired PC

I have a Photosmart Premium C309g-m connected wirelessly to the LAN, as also are several other computers (both Windows and Mac). No problem here, all connect and print fine. I also have an older desktop (windows) connected to the access point wired. How do I get the desktop to print/scan on this device? It appears HP desktop software only gives me a option of having both the devices wired to the access point or both wireless. This is silly. This is a network printer and I should be able to simply connect to it at least with its IP.
What am I missing?
This question was solved.
View Solution.

What is the model of your router? Some routers have settings that prevent communication between the wired and wireless devices. The network diagnostics here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Photosmart Premium c309g-m Extracts but does't Install

I have a new Dell Inspiron 660, Windows 7 (64bit) trying to load HP Photosmart Premium c309g-m software. Original install disk spins up, does nothing, Download file from HP site extracts but doesn't load the set up wizard. Used most of the HP troubleshooting solutions, still a no go. Can anyone help?
This question was solved.
View Solution.

Hello MichaelDell660,
Let's go ahead and do an uninstall and reinstall of the Photosmart c309g software and drivers. Click the link How to uninstall on Windows 7 and pull out all the software related to the c309g printer, once we have successfully removed the software we are going to go ahead and
On the Windows taskbar, click the Start icon type %temp% in the Search programs and files box, and then press Enter.
Find folders that begins with 7z. Look for the folder that shows the date you originally downloaded the drivers in the Date modified column, and then open this folder.
Once you are in the folder please select the Setup.exe (has a black and white HP logo) folder and run the installation
Please let me know if this was successful at running the install, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Photosmart Premium C309g-m Printer

I have an HP-Photosmart Premium C309g-m printer . I put in new ink will it not print correctly. The color is so light it is impossible to read. Also when I trouble shoot I am told the cartridges ware not aligned.Have tried to align and it wont.
My computer is an HP 64bit,8GB

The steps here should help resolve your issue. If not I would suggest soaking the printhead as described in this post.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp photosmart premium C309g-m - trouble scanning

I have an hp photosmart Premium C309g-m - printer states scan saved but can't figure out how to print it

Hello NancyDonohue,
Welcome to the HP Forums!
I understand when you scan a document to your computer, you would like a option to print. I will do my best to assist you! Please reference the Photosmart Premium C309G Manual here. The manual doesn't state you can perform this feature. It does states you can scan to, then reprint a photo.
Sorry for the inconvenience.
I worked on behalf of HP.

HP Photosmart Premium C309g-m prints wirelessly from Mac & Vaio, but not Dell...

We bought an HP Photosmart Premium C309g-m about a month ago. It will print from my (old) Mac Book Pro and from hubby's new Sony Vaio, via cable, via bluetooth, and via wireless. We want to add a Dell laptop, and have installed the latest printer software from the HP website.
When we go to "add a device" on the Dell, the process goes through "Checking network configuration" and FINDS the printer (we have it set to automatic IP). We select the printer and click Next, the software says installing device and runs netowrk diagnostics without a problem.... and then we get an error at the installing device screen that says "Printer Setup has failed to complete, click Retry to Try again or Next to continue without connecting the printer."
Very frustrated! Any thoughts? Thanks in advance for any help. I thought maybe it was a port issue, but we turned the firewall OFF, and no dice.

You could download and run this very handy utility.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Photosmart Premium C309g-m goes offline

Have an HP Photosmart Premium C309G-M that shows connected/online to the wifi network on the printer and wifi router, but computers show it as offline. power down and then back on and it shows for a short period online then goes offline and unable to get it back with out powercycle. Happens with both Laptops in the house. One toshiba and one dell. both windows 7, one 32 bit and the other 64 bit. Router is Cisco/Linksys EA6500. using WPA-PSK. When i use print scan doctor it shows the router with correct IP, but then when it tries to communicate with printer it cannot reach it. Have also uninstalled and installed printer several times and nothing changes.

Anyone have any ideas?

HP Photosmart Premium C309g-m (Fails or SLOW to Print Wirelessly)

My printer has usually worked until recently (past couple months). I have re-installed the driver several times, uninstalled the HP software, re-installed the driver only... and still the same symptoms occur.
OS: Windows 7
WiFi Router: Linksys E4200
Printer: HP Photosmart Premium C309g-m
STEPS TAKEN:
I begin a continuous "ping" of the printer from my PC and my ipad, to ensure I'm not losing network connectivity.
Pings are received on both pc and ipad without issue..
I print a "test page" from the printer properties screen.
Pings are dropped continuously...on both PC and ipad with one or two sporatic ones received with extremely high latency (29165 ms).
Printer sometimes fails to print the document or the document takes 3 or more minutes to print.
I believe it is an issue with the wireless network device on the printer. I was hoping a firmware would fix it. Can you advise me as to what the problem may be, where should I focus my troubleshooting?
I did run a HP Print/Scan Doctor tool, and it did say I had a "port mismatch" and that I needed to reboot my PC. I rebooted my PC, re=ran, and still the same "Port Mismatch" error comes up. So.. that leads me to believe it is an issue w/ my PC...but I can't find any thing that seems to be wrong w/ the port settings. Currently it is set on my printers hostname address, RAW, Port 9100.

Are you installing and reinstalling the printer from the CD? Just to establish a clean baseline lets try a full uninstallation/ reinstallation from the drivers available from the HP website.
First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer (make sure to match your correct OS):
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3793676&
Install that and let me know the result!
Have a great day!

HP Photosmart Premium C309g-m will not connect wirelessly to laptop

Hi
I am having huge issues with my HP Photosmart Premium C309g-m. I have had it for just over a year, and have NEVER had any problems with it.
I am going to give as much information as I can.
I have:
HP Photosmart Premium C309g-m printer
Samsung ML-2010 Series (Working wirelessly)
Gateway (Acer) NV5915h laptop
Windows 7 Home Premium
64-bit Operating System
Intel(R) Pentium (R)CPU P6200 2.13GHz
4.00GB Ram
Norton 360 Premier Edition
Wireless Logitech Mouse
Wireless Microsoft keyboard
It started about 2 weeks ago
At first it would lose connection, and then I would have to reboot my laptop and the printer, and it would come back. Then I had to start removing the printer and then re-installing it. It worked for a bit, but now I am not sure what I am doing wrong.
I disabled my Norton while I did everything.
I tried adding the Photosmart through the install CD, Manually adding it, disabling the HP services, and I downloaded the setup from HP, in case there was something wrong with my CD. I have gone through the entire trouble-shooter.
I have run through the install CD over a dozen times, it finds the printer and goes all the way to the end, and it says “printer setup has failed to complete. Click retry to try installing again or click next to continue without connecting to the printer now, I will connect later."
I also went to
Start typed in cmd Services.msc located the HP Network Devices Support right click Properties changed start up type to Disabled. Then re-installed the printer. It didn’t work!
I uninstalled all the HP software, and then installed it again.
I even tried typing the IP address in.
If I open a webpage and type in the IP, it brings up my printer; it shows everything with no problems.
When I added it manually I tried to set it as my default printer and I get error0X00000709. It won’t let me set it as the default, so I tried leaving my other one as the default, and then selecting the HP Photosmart from the dropdown list, then print. Same thing happens I get the error.
I also installed through a wired (USB) connection, so that I could get all the driver updates. It updated everything, and I was able to print to it, but then when I went to switch to wireless, it errors.
I also installed it by:
Start Devices and printer add printer add a network, wireless or Bluetooth printer.
It searches for my printer, it finds it. The problem is it finds 3 of the HP Photosmart!!
It shows them as follows:
HP0AB1A0 (HP Photosmart premium c309g-m)              IP http:\\192.168.1.70:3910
HP Photosmart on OWNER-PC                                             IP: \\OWNER-PC\ HP Photosmart
Samsung on OWNER-PC                                                        IP \\OWNER-PC\Samsung) (working)
Photosmart Premium C309g-m (HP)                                   IP 192.168.1.70.
I have gone through and installed them one by one, and deleting it when it didn’t work.
I have gone through the entire fix it problems on the HP website.
I can print to both of my printers through our desktop computer. I can print to my Samsung wirelessly from my Laptop; it’s just the HP that won’t print.
This is so frustrating! I used to work for HP, so I have gone through all the tricks I know.
Please help I really need to get this working. My email is [email protected], if you want to contact me directly. I might forget to come and check this.
Thank you in advance to anyone who has any ideas!

I am having the same problem with our hp 5514 printer.
IT SHOULD JUST WORK!!!!!
Why will hp not answer anybody here?
We have even changed printer from 5510 to 5514 and it will not work.
Please answer as this is very frustrating.

HP Photosmart Premium C309g-m slow previews

Hello,
Yesterday I bought HP Photosmart Premium C309g-m printer and I really wonder on few things with it's speed. Whenever I try to use some advanced features when printing photos like: adding frames, cropping, rotate etc it is incredible slow! I firstly thought that it not works at all as when I used any of these functions then just a black space appeared there. But today I tried to wait about 2-3 minutes and then the image appeared, but it is still not usable.
Any ideas how to fix that? (maybe firmware update or so) The same applies when using the snapfish.com .
Thank you so much!

I have the same problem when I want to crop a photo after it is scanned. I have to wait several seconds for the dotted lines to appear for cropping. And then when I grab them to move them, that takes up to 10 seconds also. I agree, it is slower than I expected. I am working with a Macintosh G4 PowerPC , with Mac OS 10.5.8.

HP Photosmart Premium C309g/m

Similar Messages

Maybe you are looking for