HP Split Extl Monitor

Hi can I remove the lap top screen and then work with an external monitor?

Colesie wrote:
Hi can I remove the lap top screen and then work with an external monitor?
Hi,
Yes, nearly all my laptops work that way. What is the Operating System on your machine ? The following setup is for Windows (Vista, Windows 7, Windows 8 & Windows 8.1):
(a) Right click a blank space on desktop and select Personalize,
(b) Click Personalize,
(c) Click Display
(d) Select your external Display (1 or 2)
(e) Click use this display only.
Depending on your machine, you may have to start to logon before the machine redirects display to external screen.
Now my wuestion: what do you mean by REMOVE ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How to split one monitor into two, differently configured desktops

Hello,
I have a 27" iMac. I would like to split the screen into two differently configured desktops or monitors. Apps like TwoUp or Divy don't exactly do this. I'll explain it with an example:
Suppose I'm working on a document and I need to open many folders to retrieve files. One common problem is that opened folders overlap each other and sometimes they overlap with the document I'm working on, or they go underneath the document. I would like to split the screen vertically in, say, two virtual, independent desktops/monitors, like this:
- one window/space on one side (say, on the left) of the screen would contain the document from top to bottom, with no dock bar on the bottom
- the other window/space (right) would behave as a regular, full desktop, with the entire dock on the bottom
In this way, if I need to navigate to find a file to use in the document, I would move the cursor to the right. The Finder would work only in this window/space, thus windows or other applications would never overlap or clutter the left side of the screen. Drag-and-drop from right to left should be possible.
One way to imagine it is as if the 16x9 monitor were comprised by two vertical, 8x9 independent monitors side by side, each with its own configuration.
Is this possible? Can anyone recommend an application or type of setup?
Thank you,
-celso

Looking for something like this?
You can tell Display Maid to save the positions of your open windows across many apps and later restore those positions when things become a mess. With Display Maid you don’t have to restore windows one at a time, or even one app at a time. Display Maid restores all saved window positions across all apps with one command. It will also restore window positions automatically when it detects a workspace change.
http://www.funk-isoft.com/index.php/display-maid

Cannot remove file menu from split screen monitors.

Hello, I installed the latest update from Apple which was the new Safari 7. I run 2 added monitors with my iMac being the primary. After update installed, both of my split monitors have the file menu on the top of the monitors. I went into the system menu under display and everything is as it should be yet I cannot remove the file menu from my secondary monitors....

Thanks for the info however this still didnt solve the issue. I unselected and closed window but no changes were detected. I re opened the mission control and the box was selected again. I still have the file menues on both secondary monitiors. After i installed the latest update from apple, the one with the new safari update, is when i started having this issue. Everything worked fine before. My computer seems to be runing much slower now and when i click to open safri, it takes about 40 seconds to open safari..On both secondary monitiors, the file menues operate as if they are the main monitor, which my imac should be operating as the main....This is anoying...

DHCP Split Scope Monitoring

Hello :
I have an interesting scenario where I need to setup some kind of monitoring around DHCP Scope exhaustion. Now each site has two DHCP servers with the Scopes split. So If I setup event log monitor and one server reports that a scope is running out of IP
addresses, it does not mean that the second server is also running out of free IP. Is there a way to use SCOM to monitor both DHCP servers and alert if the scope is out of free IP on both servers? There is a nice article on this for Solarwinds - https://thwack.solarwinds.com/docs/DOC-174909
but I would like to achieve this using SCOM.
PS: I know IPAM can be a good solution, but I am really interested in ways to do this using SCOM and I am open to any scripted solution or custom MPs.
Any pointers will be highly appreciated.
-A

Hi,
How about using an aggregate rollup monitor to group multiple monitors into one monitor and then use that monitor to set the health state and generate an alert.
Or Dependency Monitors with Percentage policy set:
http://technet.microsoft.com/en-us/library/hh457606.aspx
In addition, would suggest you look at DHCP failover in WS2012, which opens up some new options for HA design.
DHCP failover: This feature provides the ability to have two DHCP servers serve IP addresses and option configuration to the same subnet or scope, providing for continuous availability of DHCP service to clients. The two DHCP servers replicate lease information
between them, allowing one server to assume responsibility for servicing of clients for the entire subnet when the other server is unavailable. It is also possible to configure failover in a load-balancing configuration with client requests distributed between
the two servers in a failover relationship. For more information about DHCP failover, see Step-by-Step:
http://technet.microsoft.com/en-us/library/hh831385.aspx
Regards,
Yan Li
Regards, Yan Li

Split 4k monitor into two "virtual monitors"?

Hi all,
I'm thinking of buying a 4k monitor to replace a dual-screen setup. However, I like the functionality of having two things maximised at once. Is there any way to set up X so that it sees the 4k 3840x2160 monitor as two separate 1920x2160 monitors? That way, maximising an application would only take up half of the physical screen and the taskbar would only appear on one half.
Thanks!
Last edited by Tom B (2014-06-04 12:15:13)

You might want to look into fakexrandr or try a tiling window manager.

T420 on docking + extl Monitor shows on vc not the right resolution

Hello
i have an T420 ThinkPad which is connectet at home with a docking station per displayport. The display from the laptop is closed all the time all works well only when i not start X server the resolution is not set right here is what i mean. When starting X the resolution is ok.
und hier ncmpcpp
this is my .xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
#virtual desktop:
#xrandr --output LVDS1 --auto --output DP2 --auto --right-of LVDS1
#when not docked:
#xrandr --output LVDS1 --auto --output DP2 --off
#docked with NEC:
xrandr --output DP2 --auto --output LVDS1 --off
#when not docked:
#xrandr --output LVDS1 --auto --DP2 --off
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
sh ~/.fehbg &
conky &
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
exec openbox-session
The reason is i will when i not start X start ncmpcpp on vc1 but as you can see on the pictures they take the resolution from my laptop
How can i fix this is it possible?
ps;on my .xinitrc i have this 2 times what of them is the right? or are both the same?
#when not docked:
#xrandr --output LVDS1 --auto --output DP2 --off
#when not docked:
#xrandr --output LVDS1 --auto --DP2 --off

Thanks for the replies. I don't have an xorg.conf file. I tried one (generated by Xorg -configure) in my attempts to fix the problem, but I deleted it when I didn't work.
I'm not at home right now, so I can't get the exact output from xrandr, but I know it showed that the resolution was 1024x768.
When I first installed the system I thought that I needed the xf86-video-s3 driver, but that didn't work (X just ignored it and used vesa) so after a bit of research I found that the driver I needed was xf86-video-savage, which, as you can see from the log file, it is using.
karol, I'll try your suggestion of the UseBIOS option when I get home. The problem in your link looks exactly like mine!

Msi 6950 Splits my monitor in two after an hour or so of gaming.

http://imageshack.us/photo/my-images/69/img0054xvb.jpg/
http://imageshack.us/photo/my-images/193/img0055nl.jpg/
http://imageshack.us/photo/my-images/193/img0059xk.jpg/
As you can see this is what happens after i run furmark, 3dmark or even after an hour of Trash ops. I have tested with CF disabled and same results. I do not get such artifacts if i use my gigabyte video card by itself.
This is the problematic card
http://www.newegg.com/Product/Product.aspx?Item=N82E16814127555&cm_re=msi_6950-_-14-127-555-_-Product
Im running a crossfire configuration with a Gigabyte 2gb 6950 video card.
Is there a solution to this because i haven't found anyone with such issues and probably i have something set up wrong. I would have rmad but this card is out of stock and i dont want to refund since i got a great deal on it and ill lose it if i do.
My machine just in case
Windows 7 Ultimate
Msi 6950 CF with Gigabyte 6950
8gb 1866 gskill Ram
iNTEL 2600K processor
900W Apevia Warlock Power supply.

Quote from: aslator on 23-June-11, 01:52:34
ps:btw is that mouse photoshop or is that for real
Yes, the mouse go into training 3 times in a week

Dual Monitor setup for Mac Mini???

I just bought a VGA Y-cable and split my monitor signal to two monitors. Unfortunatley the same thing is displayed on both screens where as I was looking for an extension to my desktop.
I found this http://www.national-tech.com/catalog/dvisplitter.htm (the top one for $ 146)
I was wondering if I split the signal with a dvi splitter rather than a vga splitter if i could have a dual monitor setup with more screen space...
Thanks,
Paulie
Mac Mini Mac OS X (10.3.9)

This will do it for you: http://shopmatrox.com/usa/products/datasheet.asp?ID=788
ibook g4, mac mini core solo, powermac g4 gigabit ethernet Mac OS X (10.4.5)

I want to buy iMac. Need tips and answers

I'm considering high to purchase the iMAC 27-inch 3.1 Ghz i5 and if my question are well answered, with god grace, I will confirm my order on the launch of LION OS.
The iMac will serve the purpose as mentioned below
1. I'll be working on with Pro Logic Music Full Edition (for the purpose of composing and arrangement musics)
2. Aperture 3
3. Final Cut Express
So basically I'll be working on publications, some video and music composing and editing. So thats my main purpose.
However, I'm having consideration to upgrade
1. Is it worth it to upgrade form i5 to i7 processor? Obviously there will be increase in speed. But my question is, doest it really shows a significant speed from upgrading from i5 to i7? Can I see the processiong speed increase alotz? and if it increase, is it just little or huge difference?
2. The pre installed is 4GB, by increasing it to 8GB, will I see any significant differences, especially when working out on logic express and final cut, as i believe it needs alot of memory usage. However, does the 3 applicaiton, supports upto 8GB or what? Does it really contribute to significant of increased performance?
3. Upon purchasing my iMac, I woud like to attach another 2 units of Samsung 27 inch FULL HD supports upto 1920 x 1080 screen resolution. So basically, there will be 2 separate monitors + 1 iMac. So is it necessary for me to upgrade to the 2GB Graphics Card?? Or just leave it as 1GB. By splitting the monitors, do I really need higher resource of graphic card? i'm NOT going to play GAME. I've heard some issues, whereby when they split the monitors, there appear to be some black coverage area, and the screen size is not maximise.
4. I currenlty own a External Sound Card Powered by the FireWire 400mbps, the iMac mentioned it supports up to 800mbps, so can my external sound card support the iMac. ( This is for recording and output purpose) as I won't be using the iMac speakers, instead attaching a huge Powered Speakers to my External sound card.
5. Finally, I'm interested in purchasing the Thunderbolt Peragus Drive which can support up to 4 to 6 terabytes. So the problem and issue now is, iMac provides
1 Fire Wire - (which I will be using for External Sound Card)
Thunderbolt - 2 units, which I will be using it for 2 monitors
Peragus Thunderbolt Drive - I HAVE LACK OF ONE THUNDERBOLT CONNECTION. SO HOW?
can I use the 1 unit of thunderbolt to output into 2 EXTRA MONITORS?? My monitor supports HDMI, and DVI signals. And If yes, Will there be a PIXEL DISTORTION or BREAK?? I mean I really want a clear view of the monitor, without any loss of quality. So please suggest me. I'm extremely new to MAC, and I need very good professional advice.
I would be thankful, if you guyz could answer me clearly, according to the question.

Kalimullah Khan wrote:
I'm a bit confuse.
1. You mentioned to install another 8GB. Are you trying to say the total memory will be 12GB??
How's the situation. Is it like this
1st Slot - 2GB
2nd Slot - 2GB
3rd Slot - 4GB
4th Slot - 4GB
Yes if the way the slots are numbered result in matched pairs of memory, i.e. nothing to worry about if the Apple-supplied memory is not touched as they’ll be a matched pair; just add the two 4 GB sticks in the two empty slots.
If you don’t install the memory in matched pairs, it will work but you won’t have dual path access to the memory so the memory will be slower.
When you sum up, you get total of 12GB, which I don't think so can be configured in apple store. The options are 4GB in each slot, when you plan to upgrade from 4GB to 8GB or 16GB only.
Yes, the total would be 12 GB and you buy the additional 2x4GB memory sticks from either Apple at the time you purchase the computer or from a third-party vendor - but you must be careful to get the correct type of memory. Sites like OWC can be very helpful guiding you. If you buy from Apple, you cannot add to the device via the configuration options as you pointed out. But once you initiate the online purchase, you’ll be able to Continue Shopping for other items such as memory to Add to Cart before you Checkout. It’s easy to install memory yourself. Just be careful to buy the memory exactly designed for your machine! Any tiny variance and the memory won’t work; it’s not too difficult but read the specifications carefully.
2. You mentioned that I don't need 2GB memory card, however, my question is, by splitting the monitors into another 2 additional monitors, will the graphic display will be compromised or not? To be more clear, will I have an accurate display or a bit less quality display?
I am sure that graphics card with 1 GB will support the three displays if you are not using the computer for gaming. If you are gaming, then you might want the 2 GB card. You can prudently call Apple to discuss if you like.

Is the Dv7t or ENVY better for gaming and video editing?

Hello everyone!
I currently own a Pavilion dv7t Quad Edition notebook PC and have had it since December 2009. Ever since the beginning, my dv7t has always gotten incredibly hot when playing the simple online game RuneScape, and, quite frankly, whenever I would do... anything. Now, however, it will not turn on past the Windows OS introduction 80% of the time and the wireless detector will rarely work. Instead of sending it in for a massive repair fee, I think I'll just buy a new laptop.
So my question is: Which laptop is better for playing Runescape, video editing with Sony Vegas Pro, and general web surfing, word processing, etc: The Pavilion dv7t or the Envy 17? Do you have any information on how hot they get? I would really appreciate all support.

Hi,
Check the configurator as both can be configured with the 2nd generation Intel(R) Core(TM) i7-2820QM (2.3 GHz, 8MB L3 Cache) with Turbo Boost up to 3.4 GHz.
Split your monitor screen and put on model in each window and walk thru the configurators and pick chose your desired options noting the change in price.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Proble with Before and After in camera raw

The problem that I am having is the before and after in Camera Raw. When I press the P key for before and after; CR display the before and after to whole changes that I made and not just to one section. Let say, I am in the Detail section and Just want to see what changes I made in the Detail section only. I used to press the P key, but now I am seeing all the changes that I made to my file. I am using Adobe Photoshop CC and all my software is updated. I appreciatre a fix to this problem with many thanks

Alternatevely you can take advantage of the new function recently introduced in CC. Press "Q" , this will split the monitor in two, (either vertically or horizontally) and each time you go to a new tab and make some change you can go back to previous state by clicking the icon in the bottom right corner (see the picture).
as you can see..you can "toggle between current settings and defaults for the visible panel"

How can I get my iMac screen to divide into sections? I'm using OS X 9.2. Thanks.

How can I get my iMac screen to divide into sections? I'm using Maverick OS X 9.2. Thanks.

You cannot split a monitor up into sections in Mac OS X.
You can have separate monitor spaces or desktops that you can access using the Spaces or Mission Control functionality in OS X Mavericks.
You cannot split monitor views into seperate sections
There is no such way to do this in Mac OS X.
Do a search for an app called Cinch OR another app called A Better Snap Tool. Both of these apps are in the Mac App Store.
These may work for you.
http://www.irradiatedsoftware.com/cinch/

648Max-L and GF4 MX440-VTD 8X

I have a couple of issues I cannot seem to find the answers to. HELP!!!!
1. After I install the SIS UDMA Drivers, my video card(monitor) flashes on and off after I login (I believe it happens when nview drivers start or a least right around that time). This problem also happens randomly during game play (split second monitor off, monitor on). With a clean install, all is well, provided I do not install the SIS Drivers (2.1 and 2.2).... Damn no ATA... what a waste of money!
2. My video card has a seperate issue. I cannot get my TV out to work on my video card. I have tried the latest drivers and some backdated ones... NOTHING I do works. Video in works in all cases but video out.... NO WAY! It will not find a TV display and I have no way to Force it to use TV out to test. I am at a lost and am very frustrated.
So far I am VERY UNHAPPY with MSI. I get absolutely NO response via email, phone etc... I am at my wits end!!!
If I can not resolve these issues soon, MSI will get there CRAP back with a nice BIG BOW and the NASTIEST letter they have ever received. At that point I will see to it that I do everthing in my power to inform the public, via the media, of my woes, and see to it that it does not happen to another unsuspecting, prospective buyer of MSI Products.
MSI take some tips from a CONCERNED CUSTOMER.... Your customer service needs MAJOR improvments.... Remember, without us you would not have made the $1.14 Billion USD you did in public sales in 2002.... Something to think about I'd say!

you install SIS ide drivers,no?
(UDMA drivers????????)
you have detonator 40.72?
did you install sis agp drivers 1.13?
you must install all SIS drivers first....
I have a lot of friends who have GEf4mx440 without problems with TV out

GF4 MX440-VTD 8X and 648Max-L

I have a couple of issues I cannot seem to find the answers to. HELP!!!!
1. After I install the SIS UDMA Drivers, my video card(monitor) flashes on and off after I login (I believe it happens when nview drivers start or a least right around that time). This problem also happens randomly during game play (split second monitor off, monitor on). With a clean install, all is well, provided I do not install the SIS Drivers (2.1 and 2.2).... Damn no ATA... what a waste of money!
2. My video card has a seperate issue. I cannot get my TV out to work on my video card. I have tried the latest drivers and some backdated ones... NOTHING I do works. Video in works in all cases but video out.... NO WAY! It will not find a TV display and I have no way to Force it to use TV out to test. I am at a lost and am very frustrated.
So far I am VERY UNHAPPY with MSI. I get absolutely NO response via email, phone etc... I am at my wits end!!!
If I can not resolve these issues soon, MSI will get there CRAP back with a nice BIG BOW and the NASTIEST letter they have ever received. At that point I will see to it that I do everthing in my power to inform the public, via the media, of my woes, and see to it that it does not happen to another unsuspecting, prospective buyer of MSI Products.
MSI take some tips from a CONCERNED CUSTOMER.... Your customer service needs MAJOR improvments.... Remember, without us you would not have made the $1.14 Billion USD you did in public sales in 2002.... Something to think about I'd say!

Quote
Originally posted by buckfitty
2. My video card has a seperate issue. I cannot get my TV out to work on my video card. I have tried the latest drivers and some backdated ones... NOTHING I do works. Video in works in all cases but video out.... NO WAY! It will not find a TV display and I have no way to Force it to use TV out to test. I am at a lost and am very frustrated.
You have to connect your monitor to the DVI connector with DVI/VGA adapter and then tv-out will work

CS4-How do I remove a split screen in the Program monitor window?

I have Pro CS4 on a vista 64 OS. I am using the Mainstream encoders and my Program monitor window switches to a split screen every time I play the timeline. When I stop the playback, the screen returns to normal full screen with the last frame showing. When I start the playback again, the screen splits into two screens squishing the actual playback window to the left part of the monitor window. Any Ideas? Thanks.

I found the solution by changing my quality settings (in the top right hand corner of the program display window) from "Automatic Quality" to "Highest Quality".
I am not sure why it affects the display in this manner, but it just works this way and it is repeatable.
I am working with 50 Mb MXF files from a Sony PDW900 HD camera.I use the Mainstream codecs to inport the files. I am using a Nvidia Quadro CX as a video card with the latest drivers. I first thought that the Mainstream codecs were affecting the display somehow, but then again, I do not remember changing these display settings. Thanks for the suggestions, I appreciate the response just the same...

HP Split Extl Monitor

Similar Messages

Maybe you are looking for