Hp split x2

hi i have hp split x2 and im searching for a pressure sensitive stylus that will work with it that doesnt have a rubber tip
if you have any idea or name of anstylus please reply

Hi
As far as i know the screen on the Split X2 does not support a use of stylus.. but i can double check that for you if you want.
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

Similar Messages

PTax ded Twice incase of WPBP SPLIT (Mid month Transfer)

Hi Friends:
In SAP, whenever an Employee transfers from one state to another then system deducts P Tax Twice in that Payroll Period and this is a standard behaviour. (Due to two Splits and two regions)
Ex: 1- 15 in MH and 16 to 30 in AP then P tax of MH is deducted for 1-15 days GROSS and P Tax of AP deducted for GROSS on 16 to 30.
Now, i want to deduct only the P Tax for the Last split record in that Payroll Period. That is P tax for Extire GROSS to be deducted based on AP Region slab.
Has anyone faced this scenario/ issue. Any Exits/ BADI's available to achieve this?
regards,
Srikanth

Hi
If you want to differ from the standard calculation then you can use the BADI
HR_IN_CALC_PTX_BASIS
Regards
Sumit Pradhan

IP Phone SSL VPN and Split tunneling

Hi Team,
I went throught the following document which is very useful:
https://supportforums.cisco.com/docs/DOC-9124
The only things i'm not sure about split-tunneling point:
Group-policy must not be configured with split tunnel or split exclude. Only tunnel all is the supported tunneling policy
I could see many implementation when they used split-tunneling, like one of my customer:
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
banner value This system is only for Authorized users.
dns-server value 10.64.10.13 10.64.10.14
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
default-domain value prod.mobily.lan
address-pools value SSLClientPool
webvpn
anyconnect keep-installer installed
anyconnect ssl rekey time 30
anyconnect ssl rekey method ssl
anyconnect ask none default anyconnect
username manager-max password XTEsn4mfYvPwC5af encrypted privilege 15
username manager-max attributes
vpn-group-policy GroupPolicy1
tunnel-group PhoneVPN type remote-access
tunnel-group PhoneVPN general-attributes
address-pool SSLClientPool
authentication-server-group AD
default-group-policy GroupPolicy1
tunnel-group PhoneVPN webvpn-attributes
group-url https://84.23.107.10 enable
ip local pool SSLClientPool 10.200.18.1-10.200.18.254 mask 255.255.254.0
access-list split-tunnel remark split-tunnel network list
access-list split-tunnel standard permit 10.0.0.0 255.0.0.0
It is working for them w/o any issue.
My question would be
- is the limitation about split-tunneling still valid? If yes, why it is not recommended?
Thanks!
Eva

Hi,
If you're not using certificates in client authentication then the SSL handshake will complete before the user is requested to authenticate with username/password. If this authentication request fails you will see the SSL session terminated immediately following this failure (as in the logs you provided). Notice the 5 seconds between the SSL session establishment and termination, this is most likely when the user is being authenticated against the aaa server. If the phone is failing authentication against an external aaa-server you'll want to investigate the logs on that server to determine the root cause of the failure. The ASA can also provide confirmation of the authentication request/reject with the command 'show aaa-server'. If you want to see what's going on at an authentication protocol level you can enable several debugs including "debug aaa authentication|common|internal' and protocol specific debugs such as 'debug radius user|session|all' or 'debug ldap'.
Did this answer your question? If so, please mark it Answered!

Hi, I am having trouble MacBook Air crashing since Yosemite upgrade. I ran an Etresoft check but I don't know what it means... my system runs slowly and crashes. I have to force shutdown. Sometimes screen is black for a split second b/w webmail pages

Hello,
I am having trouble with my MacBook Air 13 inch June 2012 MacBook Air5, 2 4GB RAM details below in Etresoft report. I recently upgraded to Yosemite and am having system trouble. My computer crashes and I have to force quit to restart. When using webmail there is a black screen for a split second between pages. This did not happen before. I am worried that it is not running properly and perhaps I need to revert to the previous operating system. I only have a MacBook Air and no need to share images between a tablet or phone so I did not need the new photo sharing software of Yosemite. I wonder if I don't have enough RAM to run it? I did not run time machine before I made the upgrade as I did not realise the significance of an upgrade as not very Mac literate. Any advice on whether my system is in danger... most appreciated! I am writing a book and making a back up but this machine is my lifeline and my work is conducted through it. It ran perfectly before... the Yosemite upgrade has perhaps highlighted some problems and it has unnerved me!
Thanks ever so much for your advice!
Lillibet
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 9:53 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Air (13-inch, Mid 2012) (Technical Specifications)
    MacBook Air - model: MacBookAir5,2
    1 1.8 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Not upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n
    Battery: Health = Normal - Cycle count = 694 - SN = D86218700K2DKRNAF
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD 1440 x 900
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:22:41
Disk Information: ℹ️
    APPLE SSD SM256E disk0 : (251 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 249.77 GB (167.35 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
    Apple, Inc. Keyboard Hub
        Mitsumi Electric Apple Optical USB Mouse
        Apple Inc. Apple Keyboard
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/WD +TURBO Installer.app
    [not loaded]    com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
    [not loaded]    com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
    [not loaded]    com.wdc.driver.USB-64HP (1.0.3) [Click for support]
    [not loaded]    com.wdc.driver.USBHP (1.0.14) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
    [loaded]    com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Agents: ℹ️
    [running]    com.mcafee.menulet.plist [Click for support]
    [running]    com.mcafee.reporter.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
    [running]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [failed]    com.apple.spirecorder.plist
    [running]    com.mcafee.ssm.Eupdate.plist [Click for support]
    [running]    com.mcafee.ssm.ScanManager.plist [Click for support]
    [running]    com.mcafee.virusscan.fmpd.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Dropbox    Application (/Applications/Dropbox.app)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    EvernoteHelper    Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    TouchP-150M    Application (/Applications/Canon P-150M/TouchP-150M.app)
    iPhoto    Application (/Applications/iPhoto.app)
    WDDriveUtilityHelper    Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
    WDSecurityHelper    Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    JavaAppletPlugin: Version: Java 8 Update 45 Check version
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    FUSE for OS X (OSXFUSE) [Click for support]
    Java [Click for support]
    MacFUSE [Click for support]
    NTFS-3G [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 249.77 GB Disk used: 82.42 GB
    Destinations:
        My Passport Edge for Mac [Local]
        Total size: 499.94 GB
        Total number of backups: 27
        Oldest backup: 2013-01-31 21:15:26 +0000
        Last backup: 2015-05-02 11:33:09 +0000
        Size of backup disk: Adequate
            Backup size 499.94 GB > (Disk used 82.42 GB X 3)
Top Processes by CPU: ℹ️
         6%    WindowServer
         3%    fontd
         2%    VShieldScanManager
         0%    taskgated
         0%    notifyd
Top Processes by Memory: ℹ️
    745 MB    Google Chrome Helper(8)
    439 MB    kernel_task
    246 MB    VShieldScanner(3)
    160 MB    Google Chrome
    127 MB    Finder
Virtual Memory Information: ℹ️
    130 MB    Free RAM
    3.87 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 2, 2015, 09:30:08 PM    Self test - passed
    May 2, 2015, 08:52:59 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-02-205259_[red acted].crash
    May 2, 2015, 09:28:53 AM    /Library/Logs/DiagnosticReports/backupd_2015-05-02-092853_[redacted].cpu_resour ce.diag [Click for details]
    May 1, 2015, 05:45:24 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-01-1745 24_[redacted].crash
    May 1, 2015, 05:38:54 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173854_[redacted].crash
    May 1, 2015, 05:38:43 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173843_[redacted].crash
    May 1, 2015, 05:38:32 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173832_[redacted].crash
    May 1, 2015, 05:38:27 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173827_[redacted].crash
    May 1, 2015, 05:38:10 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173810_[redacted].crash
    May 1, 2015, 05:38:00 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173800_[redacted].crash
    May 1, 2015, 05:37:49 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173749_[redacted].crash
    May 1, 2015, 05:37:38 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173738_[redacted].crash
    May 1, 2015, 05:37:27 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173727_[redacted].crash
    May 1, 2015, 05:37:22 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173722_[redacted].crash
    May 1, 2015, 05:37:06 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173706_[redacted].crash
    May 1, 2015, 05:36:55 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173655_[redacted].crash
    May 1, 2015, 05:36:44 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173644_[redacted].crash
    May 1, 2015, 05:36:33 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173633_[redacted].crash
    May 1, 2015, 05:36:22 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173622_[redacted].crash
    May 1, 2015, 05:36:17 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173617_[redacted].crash
    May 1, 2015, 05:36:01 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173601_[redacted].crash
    May 1, 2015, 05:35:50 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173550_[redacted].crash
    May 1, 2015, 05:35:39 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173539_[redacted].crash
    May 1, 2015, 05:35:28 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173528_[redacted].crash
    May 1, 2015, 05:20:29 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-172029_[red acted].crash
    May 1, 2015, 04:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-165505_[red acted].crash
    May 1, 2015, 02:53:58 PM    /Library/Logs/DiagnosticReports/sharingd_2015-05-01-145358_[redacted].crash
    Apr 20, 2015, 09:31:20 PM    /Library/Logs/DiagnosticReports/Kernel_2015-04-20-213120_[redacted].panic [Click for details]

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

How do we split our iCloud accounts but keep one iTunes account so we can share purchased content for our multiple iPhones and iPads?

How do we split our iCloud accounts but keep one iTunes account so we can share purchased content for our multiple iPhones and iPads?

You can migrate a copy of the data to a new account, then delete the other person's data from each account. To do this, on the phone that will be changing accounts, if you have any photos in photo stream that you want to keep on the phone, save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll. If you have any synced notes that you want to keep on the phone, email these to yourself so you can create new notes in the new account.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The phone that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account. You will create a new icloud email address with you turn Mail to On.
Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (such as deleting your wife's data from your account, and vice versa).

How can I display & split the audio & video from the same digitized clip?

I digitized a scene into iMovie that I edited on a professional system which I don't have access to anymore. The whole scene is 1 clip. Now I see a few tweaks that I want to make, so I was hoping to do them in iMovie.
I want to "pull up" the audio in one section - meaning I want to take cut about 20 frames of audio from the end of a shot, and then move all the other audio up to fill the hole. To compensate for the missing 20 frames, I'll cut video off the head of the next shot. Some call this prelapping. Some call it an L-cut. Some call it asymmetrical trimming. Either way, I can't figure out how to do it in iMovie.
My clip appears in the timeline as one track - a single track that contains the video and 2 audio tracks. How can I display the audio that's tied to the video on its own track? Then I think I could split audio & video wherever I wanted and trim things up - but I can't figure out how to do it.
Am I asking too much of this software?
BTW, I never see the option to "Split audio clip at playhead". I'm not displaying clip volume or waveforms. Choosing to display waveforms doesn't show me anything. Maybe iMovie thinks I'd only want to see waveforms of audio that isn't tied to my video-and-audio clips?
Thanks in advance for any help...

Jordon,
"Am I asking too much of this software?"
No, you're not.
You first want to select your clip(s) and choose Advanced>Extract Audio.
This will copy the audio from the video clip and place it on one of the two separate audio tracks while lowering the audio level to zero in the original video track.
You can now edit and move the audio independently of the video.
With the audio clip selected, you'll find you now have access to Edit>Split Selected Audio Clip at Playhead.
Matt

How to delete the one of cost centers in Splitting Structure(OKEW)?

Dear All,
I have a question about Splitting Structure as below? Could I get favor from you? Thanks a lot.
How to delete the one of cost centers in Splitting Structure(OKEW)?
Jocha

Hi Chang
Welcome to SDN! Its our pleasure to help you here
Step 1: Select your Cost Center in OKEW which is assigned to the Splitting Str
Eg: Cost Ctr 1001 is assigned to Splitting Str Z1... Tick the Check box against 1001 under Z1 Splitting Str
Step 2: Do a Single Click on the text "Non Assigned Cost Centers"
Step 3: Press Shift +F6 (Or Click on the Assign Button, next to the Pencil icon)
Br, Ajay M

We have one apple id for all out iphones and was wondering if there was a way to split our account out to 4 seperate accounts

trying to find out if there is a way for me to split out my itunes account so we can each have our own log in?

You can create new accounts for each of you for future purchases, but all the content you have purchased through your current ID is permanently locked to that ID and cannot be assigned to another.
Regards

How can I split my itunes account?

We have had an itunes account for both of my teenage boys. Now that one is off to college and the other is into different music we find it very complicated to have 2 different accounts. Is there any way to keep items they purchased on this account but split it into 2 accounts?

You can create a new account (e.g. via this page), but you can't currently copy or transfer content from one account to another - so anything that was bought or downloaded via your account will remain tied to your account

How can I split a large library without days of tedious work???

I've been reading other discussions for a few hours but feel my situation warrents a new discussion to see if anyone can help.
I've been using iPhoto for many years. I've been using a 2 GHz Intel Core Duo 2007 era iMac the whole time. I'm now using iPhoto v8.1.2. Running OSX 10.6.8.
My iPhoto library is now quite large with about 40,000 photos and about 175 G in total size. I have put a lot of time into organizing the photos. Everything is religiously backed up.
Over the past year or so the performance of iPhoto in terms of speed has been slowly declining. It takes a long time to open, but the most cumbersome is the spinning beach ball when I "commit" to enhancements to a photo I've made (contrast, saturation, sharpness etc). Recently that beach ball could actually take 3-5 minutes. I find this intolerable.
So I started researching this to see if others have the problem. As best I can make out after a few hours of research is that my library is too large and my computer too old. I don't want to replace my computer becuase of iPhoto so I started researching the idea of splitting my library into smaller libraries.
I found several 3rd party programs (iPhoto Buddy, iPhoto Library Manager) that made it seem they may be able to help me easily split my library into several libraries. Unfortunately neither actually does this but instead tells you how you need to do that manually.
The methods to split your library manually they suggest are horrendously tedious for a 40,000 photo library with over 1,300 carefully constructed Events.
And this brings me to where I stand today. I copy my entire library to an external hard drive, open the copied library and what I WANT to do is prune it to say 1/10 of the size (say two years of my photos). (Realize I'll have to do this process of copying my entire library 10 times, and pruning each time.)
But then I find out that iPhoto totally chokes when you try to trash more than "80-100" photos at a time! Morever, I come to find out that emptying the trash of even 80 photos takes 3-5 minutes!
Although I appreciate the help and advice, perhaps you can understand my frustration with Apple. I'm literally an indentured servant to iPhoto if I want to preserve all the work I've done on my library. I'd switch to another program if it would preserve all my events but I can not find one that does.
1. The performance of their software declines with no warning to the point where it can't be used unless you're unemployed and have nothing else to do.
2. You look for a fix and find you have to split your library.
3. When you try to split your library you find it will takes days and days of tedious work to complete.
So that is my story. That is why I'm so angry with Apple.
Have I missed anything or am I doomed to this dreary work?
Thank you for any help and guidance you can provide.

My next move would be to rebuild with Library Manager:
note the caveats:
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Phoshare will still work for an older version of iPhoto like yours. The problems it reports are with iPhoto 11, and that has the same ability built-in, so making it redundant.
I'm not sure about videos, an email to either developer should answer that one for you.
Regards
TD

Can you split an iTunes account into two separate iTunes accounts?

My son and I have shared my iTunes account since he was in junior high. We have both added to it over the years, amassing a huge library. My son has now left home and joined the military. At this point we want separate accounts - so we can pay separately for our purchases, back up to our own Clouds, etc. Can he take his purchased music from my library and move it to his own, new account? This would leave me with only the music I have purchased, which is fine with me. The library is currently on both of our computers.

You can't split accounts nor transfer content from one account to another account - content will remain tied to the account that downloaded it.
For new purchases he can have his own account, and he can have that and your shared existing account authorised on the computer's iTunes that he uses (Store > Authorise This Computer menu option).
If he uses iTunes Match, automatic downloads or redownloads an account's past purchases then he may tie that computer (or iOS device) to that account for 90 days : http://support.apple.com/kb/HT4627 - so he wouldn't be able to do any of those three things on a different account until the 90 days have completed.

Split list view in finder

Anyone know if there is any plugin (or app) for Finder that split list view in 2 independent columns, so I could drag and drop files (and folders) between folders more easily?
Path Finder have this feature, but I wish to keep in finder (its free and follows the "less is more" idea).

It's what I've been doing... I just thought that an plugin like these wouldn't be so hard to find! But that's alright!
Thank's everybody!
Message was edited by: Cesar Lucci
Message was edited by: Cesar Lucci

Split PO

Hi,
While creating a split PO, i am getting error message as "can not retrieve tax information". I checked and still getting the same message.
any solution pls
Lava

hi lava,
Check this thread
Tax Information cannot be reteived!
Jeyakanthan

Getting split payment terms in case of customer credit memo(Doc type DG)

Hi Guys,
Is there any FM available for getting split payment terms in case of customer credit memo(Document type DG). There will be no invoice/billing doc for this document type and will be created from FB75 transaction. For billing document i am using FM SD_PRINT_TERMS_OF_PAYMENT_SPLI. Please let me know if there is any FM for accounting document also.
Thanks,
Vinod.

Hi,
Try this bapi
BAPI_AR_ACC_GETSTATEMENT

Inbound Delivery: Inbound WHSCON IDoc with Batch Split - HowTo...?

Hello
We have another tricky problem to solve on our ERP 6.0 system.
My colleagues of Lindt UK create manually inbound deliveries (VL33N) which are replicated to the warehouse (DESADV IDoc -> TRADACOMS.ORDHDR).
When the goods arrive at the warehouse they send back a good receipts message (TRADACOMS.DLCHDR -> WHSCON IDoc).
In some cases we have a batch split because the goods have been put into different storage locations. Example:
- item 10: 200 Cases of product 4711, batch 10-2011, in storage location '0001' (free available for Sale)
- item 10:     5 Cases of product 4711, batch 10-2011, in storage location '0004' (damaged)
I am aware that in the inbound WHSCON item 10 is a main position and the two actual batch split positions are sub-items (900001 & 900002 with HIPOS = '10'). I tried to used E1EDL19-QUALF = 'BAS' (= batch split) with the sub-items but failed so far to update the inbound delivery that I can see the batch split.
I have managed to get one sub-item but not 2 of them. Somehow the system aggregates the quantities for both sub-items into the single item that shows up in the inbound delivery.
When we send the inbound delivery to the warehouse the item looks like this:
- item 10: 200 Cases (no batch yet, Putaway quantity = 0, because these data are coming from the warehouse).
QUESTION: Has anybody else been faced with a similar (if not identical) problem and how did you solve it?
Thanks a lot in advance for your valuable input.
Regards
Uwe

Hello Finbarr
I assume that you do NOT send any (suggested) batches to your warehouse. Otherwise you would have the same problem like we have that the WHSCON cannot overwrite a (suggested) batch.
However, if you just send the quantity per item then the batch split is much simpler than you suggested:
"First E1EDL24 segment:
POSNR     50
MATNR     000000000000602006
MATWA     000000000000602006
CHARG     L1519   " <<< first batch
LFIMG     37.000
VRKME     CT
"Second E1EDL24 segment:
POSNR     50
MATNR     000000000000602006
MATWA     000000000000602006
CHARG     L1880   " <<< second batch
LFIMG     37.000
VRKME     CT
Well, and as qualifier we use: E1EDL19-QUALF = 'XYZ' " a dummy
The SAP system is smart enough the realize that these two E1EDL24 segment belong to the same item yet have different batches and, therefore, yield a batch split in the delivery. The system generated the 9xxxxx numbers for this sub-item lines automatically.
Although I believe that it is not possible to change a batch in the delivery using an inbound WHSCON I would appreciate to have a final proof of this assumption. I could imagine that if you first delete the item containing the suggested batch and then add a new item with the actual batch from the warehouse it might works. However, this would require to implement a user-exit which I do not prefer.
Regards
Uwe
PS: It seems I gave an answer to the wrong question (should be EDI (DESADV): Can batches be overwritten by an inbound WHSCON (pick conf)? )

Domain Splitting and iDisk issues

First, my apologies if my question has been answered previously. I did search the forums, but didn't find anything promising.
I have split my large domain.sites file into four separate domain.sites file, following the guidance of folks on this forum. Each domain.sites file contains two sites; a one-page "index" site with links to all my sites and one of my "real" sites. (the index site has a slightly different name in each domain.sites file so I don't ovewrite).
But now I'm having a dickens of a time keeping all the sites online at the same time. I did some searching in these forums and discovered that I have to do two rounds of "publish all." Since these were existing files, the first time I told one domain file to "publish all," it erased the sites I had deleted from that file. After the second round of publishing, the sites have all come back (except for my biggest one, which I haven't published a second time; I'll do that overnight).
It looked like I have everything working...until I synced my iDisk. Then one of my sites disappeared again! Plus, some of my sites that I can access on-line don't show up on my iDisk.
I typically leave my iDisk mounted on my desktop. Do I need to change this if I'm working with multiple domain.sites files?
Thanks for any help you can provide!

Thanks to both of you for your help. I after one last publish last night, I got all my sites on line.
Syncing my iDisk didn't work as well, though. Somehow I ended up with two copies of my iDisk on my desktop: one with the typical globe icon and another with a generic "drive" icon. The globe one was supposedly the current one, saying it had sinced this morning, but it only had some of my sites on it. (Oddly enough, it had each of the index sites, from all four domain.sites files, but not all the "real" sites from those files) The plain "drive" icon idisk had all the files on it. I couldn't get rid of either of them without restarting. But restarting seemed to set things to rights.
I've taken Varkgirl's advice and don't have my iDisk on my desktop. I didn't really access it much anyway.
Would it be of benefit to others for me to spell out the steps I took to split my domains and have a site index always show up as the site for the short url? I'd adjust it with some of the things I've learned in the process. I know there are good instructions for domain splitting in this forum already, but I don't know that my approach to a sites index with multiple domains has appeared on the forums before.

Hp split x2

Similar Messages

Maybe you are looking for