HP xw8600 nvidia gtx 650 graphics card "cannot start device code 10"

I have an HP xw 8600 with two Xeon 5450 processors and 4GB RAM, it's still running XP sp3 with /3GB enabled. Bios 01.46
The original ATI Firegl graphics card just died and I have installed an nvidia geforce GTX650. The latest nvidia driver is installed version 344.11. But the graphics card isn't running correctly, it provides very slow low resolution graphics and device manager says "cannot start device code 10".
I tested the card in a Dell t1700 and it worked correctly.
NB. while waiting for the GTX650 I installed an old nvidia fx550, the card worked correctly running dual monitors. BUT after installing the GTX650 and getting the error, if I switch back to the fx 550 it also now gives the code 10. Tried going back to a restore point before the GTX650 was installed and reinstalling the fx550, but it stall has the same code 10 error.

Hi:
You may also want to post your question on the HP Business Support Forum -- xw Workstations section.
http://h30499.www3.hp.com/t5/Workstations-z-series-xw-series/bd-p/bsc-272#.VC1Y-Xl0y9I

Similar Messages

Installed Geforce GTX 650 graphics card, but monitors won't turn on

I have installed a geforce gtx 650 graphics card in my hp pavilion and a corsair hx750 power supply, but after installing it and trying to get it to work the monitor won't detect any signal from the dvi plugs. I've tried looking up the problem before, and I think it is because the hp pavilion is an AMD, so it is locking out any new hardware in the computer, but after uninstalling everything and putting the original power supply back in, the monitors still won't get signal. I don't know if I might have broke something while trying to hook up the power supply or graphics card, but i figured someone else could figure out the problem.

Hi,
Please post the HP product number for your PC. How to Find the HP Model Number and the HP Product Number or let HP automatically find your PC model number and HP network attached printers.
Monitor or monitors? Title indicates monitors.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

T22 ethernet card cannot start error code 10

i iust bought this computer trying i have t22 2647 m2u trying to find driver for ethernet card ive tried several drivers from different sights none seem 2 work all say cannot start error code 10 i tryed 3com mini pci card and and intel 10/100 sp mobile combo i have win xp sp 3 anything else you need to know email me sorry if didnt do something right on this im new at this posting

Welcome to the forum!
The problem here is most likely that there is no ethernet card installed, although there is a port in the back, since that's the way machine had left the factory:
Product: ThinkPad T22 2647-M2U [change]
Operating system: All [change]
Original description: PIII 900MHz (256KB), 128MB RAM, 20.0GB HDD, 14.1 XGA(1024x768) TFT LCD, 8x-2.3x DVD, Modem, TV out, Li-Ion battery, Win98SE
But don't worry, you can get a combo modem/LAN card for a few bucks nowadays.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Wifi card cannot start (Code 10) with 4 port USB2.0 hub inserted

Hello,
I could use some help with the following:
I have an IBM Thinkpad 390X 2626 L0A with 512MB and W2K SP4, for internet/networking I use an Wifi card with an Atheros AR2413A chipset. This setup works great but recently I bought a 4 port USB2.0 hub cardbus with a VIA VT612 chip.
When I insert the USB hub in the second (top) slot and conect a memory stick to it the internet/networking connection falls away. Properties in devicemanager shows: Cannot start device, Code 10.
When I restart with both cards inserted I get the same message.
When I use both cards in a Toshiba Tecra 8000 256MB and W2K SP4 they both work fine. So it looks like the cards are working fine.
I installed all the latest drivers and BIOS for the Thinkpad and for the cards.
My questions are:
Is there anyone with the same problem.
Is there a kown solution. Maybe some changes in the registry.
Could a program like CardWizard help.
Any other advice is also welcome.
Thanks,
Antoine

Glad to be joining ship.
I also thought about an IRQ conflict. But W2K SP4 should be able to handle that and actually doesn't allow you to manually change IRQ settings. Device manager shows both cards on/with IRQ 7. Maybe there is something I can do with the PCI manager in Configuration Manager but I wouldn't know what. It just reads Device 1,3,4 on IRQ 11 en Device 2 on IRQ 5.
I think it is most likely a power issue, since the Wifi-card uses (relatively) a lot of power. Using Configuration Manager I already shut down all not used ports (serial, parallel, joystick, IR and modem) and I also tried disabling the PCI power management in BIOS.
I'm looking for a tweak (registry) to boost the power to the pcmcia slots or just the slot containing the wifi-card, or to assign a different IRQ to each slot/device. Also I would like to try the Card Wizard program that was available for the NT versions.

Video card issue - nvidia gtx 650 ti in a HP xw 4600

I am installing a nvidia gtx 650 ti into a HP xw 4600 running win 7. At start up we are getting 6 beeps and no monitor output.
We tried the card in a different machine and it worked, so we know the card is good. Any assitance would be appreciated!
We have upgraded the power supply to 600W thinking that was the problem, no joy.
Any other thoughts?

From the troubleshooting guide:
http://h10032.www1.hp.com/ctg/Manual/c01973592.pdf
it's a pre-video graphics error - try to reseat the graphics card.
Well, I think you have done that already.
This is an office workstation designed for quadro graphics cards ...
Maybe you need a BIOS update:
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=12454&prod...
*** Say 'Thanks' with Kudos ***

Render video with Nvidia Gefore GTX 860m graphics card

Is there a way to render video with my Nvidia Gefore GTX 860m graphics card in Premire Pro CS6? It's not on the list, and the option is grayed out.

Add it to the list

Lighting effects filter not available on PScc - using windows 8.1 with GeForce GTX 680 graphics card

I have Photoshop cc and Lightroom 5.5. My computer runs windows 8.1, 64 bit, with GeForce GTX 680 graphics card.
I am trying to use the lighting effects filter, but it is grayed out so I cannot select it.
Can you tell me what I need to change in order to use the lighting effects filter?

This is the Lightroom forum. I don't use the lighting effects very often in Photoshop. But if I recall correctly, it will only work on 8-bit images.

NVidia GT 610 Graphics Card - Code 12

I have installed my new NVidia GT 610 Graphics Card and installed the driver perfectly (BIOS is also up to date) but when I check the device manager (via the built in Integrated Graphics) it says:
This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)
I tried disabling the Integrated Graphics and then restarting the system with the GT 610. I can hear the computer reach my log-in screen but I have no picture apart from a black screen and a solid white '-' in the top left corner. I tried to take it a step further by disabling the intergrated graphics directly from the BIOS but when I do that, when the pc starts up I get stuck on the Blue into screen that says "press escape for startup menu" which doesn't work at all, forcing me to turn if off.
I feel like I am so close to getting my new card to work but I can't figure out what to do from here. I have tried looking for a similar experience using the search function and one dude said he got his to work by disabling "many" "unnecessary" hardware things, but I am hesitant to do that without proper knowledge...
Please help! I will keep a close eye on this thread in the coming hours (currently 8:54pm here).
Edit: I have posted the exact same question on the GeForce forums.
Edit: Troubleshooting tells me that "Hardware changes might not have been detected".
Edit: Location - PCI Bus 1, device 0, function 0.
This question was solved.
View Solution.

Actually you may find that you have more success with an AMD\ATI Radeon video card.
I have experienced that with some motherboards, specifically Pegatron motherboards.
The problem is that you are delving into the DIY gaming PC realm and trying to do it with a prebuilt desktop PC.
Upgrading a prebuilt PC does not always result in a success story. Don't even consider trying to install cutting edge gaming memory modules. That will be a definite disappointment for you.
You may get lucky with an AMD Radeon HD video card.
But...You might just run into the same frustrating scenario you are facing today. I wish I had better news to give you.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Nvidia Gtx 650 ti boost vs Nvidia Gtx 580

Hi everybody,
I have an hard question about nvidia gtx video cards.
The nvidia gtx 650 ti boost is adeguate for editing video in fullHD with Premiere Pro Cs6 ?
I have chosen this video card because the price is very interesting: "only" 150 € (more or less)
Another question: is it adeguate for sporadically editing whit After Effects Cs6 ?
I have compared the gtx 650 ti boost with the gtx 580. The second is more more powerful, but the price is 450 € (more or less). I have found the gtx 580 used at 200 €.
Question: Which is the better choice? gtx 650 ti boost new or gtx 580 used (and maybe overclocked)?
Thanks.
Reference:
gtx 650 ti boost http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-650ti-boost/specifications
gtx 580 http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-580/specifications

Software components? I use only Premiere and After Effects.
I'm sorry, I expressed myself badly.
It is clear that the 580 is faster than the 650 but my question is: the 650 is powerful enough? I don't pay 200 Euro for a "insufficient" video card.
The second question is if the used grafic card is a good choice.
Thank you so much.
PS: the configuration of the system is:
Intel i7 920 (8M, 2.66 -> 2.93 Ghz)
RAM 12 GB triple channel @ 1066 Mhz
Motherboard: Asus p6t

Success story: NVIDIA 8600M GT graphics card defect repaired at no cost

This is the story of Apple servicing my MacBook Pro with the NVIDIA graphics card defect.
I had the NVIDIA 8600M GT graphics card defect in my 2 year old MacBook Pro. The symptoms were pinkish images, scrambled and chopped images, and finally leading to no video, all within a matter of 3 days. I called AppleCare using the old number I remembered from my 100mhz Mac days: 1-800-SOS-APPLE. I was greeted by a real person within 3 minutes. She explained that my 90-day complimentary phone service had expired some 600 days ago.
After I mentioned the specific Apple Knowledge base article that described the defect (TS2377), and that it was covered up to three years out of warranty, she transferred me to a MacBook Pro specialist. Sheri ran me through several standard resets and reboots. She then suggested that it be taken into an Apple store for a genius to look at. When I explained that the nearest Apple Store was an hour away, she arranged for a mail-in service.
After the call had ended, I received a simple email with her phone number so that I could contact her if I needed to. Another automated email contained my repair case number and a link to check the status online. The online status center is very easy to use. It displayed three steps: Sending the empty box, service in progress and return. FedEx tracking numbers were included with working links.
The next day an empty box arrived, completely with graphical IKEA like packaging instructions and form fitting foam for my MacBook Pro. I knew when the FedEx truck came around, so I had my computer ready by my side. As soon as FedEx showed up, I explained that the empty box was for the computer and Marcos helped me apply the pre-paid return label and taped the box expertly with tape from his truck. I also placed in the box a copy of the Apple Knoweldge base article and pictures I had taken of the issue.
Apple had included a small stack of super adhesive pre-cut tape square, but Macros was already taping it before I figured out what they were. The return label was also pre-paid with overnight service.
The next day I logged into the online support status at Apple.com and checked my status. The tracking number showed it had arrived in Houston, and the three steps had been updated to "Repairs completed" and "Return in progress."
The return FedEx tracking number was displayed later in the evening, and it showed that it was guaranteed to arrive by 10:30AM the next day. Speedy service! Sure enough, the next day I had my computer back in my hands, all data perfect and intact. I was very worried since I was not able to make a back up before sending it in, and Apple does not guarantee data safety. Apple had replaced the logic board, valued at $700 on iFixit (http://www.ifixit.com/MacBook-Parts/MacBook-Pro-15-Inch-Core-2-Duo-2-2-GHz-Logic -Board/IF185-073).
The funny thing is, for the past 5 years, I have always cloned my drive or used time machine, but for the past two months I had cleared the backups to make up extra room on my externals. You really never know when disaster will strike!
Learned:
- Apple Customer Care is top notch, speedy and their status site is very easy to use
- FedEx service was very helpful
- If you have a NVIDIA graphics card, Mac or PC, check if your model is affected. Just today Sony announced that NVIDIA cards with defects will now be covered for 4 years out of warranty. (http://news.cnet.com/8301-13924_3-10307592-64.html)
- Back up your stuff NOW. Use a flash drive or email files to yourself for a cheap fix.
Roland

ha
got the same problem with my mbp (dec 2007)
also no video within 5 hours .... also no external video.
lucky i had screen sharing on so i could check the system profiler via an other mac.
It couldn't find the 6800M GT anymore...
did another backup and went to the local apple store
took a print out of Apple Knowledge base article that described the defect (TS2377)
and they replaced the logicboard+gpu for free within 10 days ...
everything is ok now except for my maxmsp copy which thinks it runs on an other machine and complains about a missing licence ....

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

This is my experience with MSI, and their NVIDIA GTX 570 reference card.

Hello my name is James king.
and This is my experience with MSI, and their NVIDIA GTX 570 reference card.
(5/27/12) Day one. I update my driver from Beta 301.24 To WHQL 301.42. and as you would expect, it worked. so i restart and go play kerbal space program (if you haven't played this go, play it now i love it) 5 minutes later it starts artifacting, eg. textures stretching, random green spots. "ugh" so i start troubleshooting, reinstall revert and so on. later i give up and go play Portal 2, i load the game opening screen i see lots (100-250) of little flickering green dots. first instincts says its the cable, test nope. then maybe the screen, test nope. i keep testing throughout the night, to no avail.
(5/28/12) so to the internet, for help. 3 hours later nothing, but people with bad cards. at opening i call NVIDIA Tech Support, they say to call MSI so i do. 3 calls no pick up, 4th call and i get a "Support technician" who is no help, says to fill out a RMA form online. and so i do more troubleshooting for the rest of the day. and i give up, and go to bed.
(5/29/12) i fill out a RMA form, end of day i get an email from MSI that says; "Dear Valued Customer [email] your RMA is pending approval, and you will get an email within 1 weak with shipping information.
(6/1/12) shipping information, instructions, but no shipping label.
(6/4/12) i ship the card, via UPS
(6/12/12) after using the most round about route eg. it got to MSI.
United States 06/04/2012 6:40 P.M. Order Processed: Ready for UPS
[my city], MS, United States 06/04/2012 9:10 P.M. Departure Scan
Jackson, MS, United States 06/05/2012 12:15 A.M. Arrival Scan
Maumee, OH, United States 06/07/2012 3:40 A.M. Departure Scan
Hodgkins, IN, United States 06/07/2012 7:00 A.M. Departure Scan
Hodgkins, IL, United States 06/07/2012 2:42 P.M. Departure Scan
Vernon, CA, United States 06/11/2012 10:30 P.M. Departure Scan
Baldwin Park, CA, United States 06/11/2012 11:05 P.M. Arrival Scan
Baldwin Park, CA, United States 06/12/2012 9:42 A.M. Delivered
(6/13/12) email from MSI, says they got it.
(6/14/12) email from MSI, says it is in procesing.
(6/20/12) email from MSI, saying they shipped it and that [this] is the tracking number.
(6/26/12) end of day. i receive the card, and see the case is badly scratched. i install it in my pc and hey it worked (for now). watch some YouTube, and go to play skyrim. start up load my save and i make one step, and my pc hard freezes. "sigh" half an hour later, i give up and go play minecraft 10 minutes in, and it hard freezes. so now more troubleshooting,5 hours later no luck.
(6/27/12) i have called MSI Tech Support 2 times, when they picked up the phone they say to call customer service. 7 calls later no pickup.
and that is it MSI have sent my on the run around too long.

So are you asking us for help with your PC issues or simply complaining to us about your RMA which we on this forum have nothing to do with. We are MSI product users here the same as you and we are helping each other out with problems on their PCs with their MSI parts. If you need what help we can offer assisting you with a problem then start a new topic and we'll do the best we can to help you.

Why is the Nvidia GTX 680 CUDA card supported by Premiere Pro CC, and NOT After Effects CC?

Why is the Nvidia GTX 680 CUDA card supported by Premiere Pro CC, and NOT After Effects CC?

Thanks Todd for all the info. It is much appreciated and very helpful. On a different note, could you possibly direct me to the correct forum to fix this bug? I am suddenly recieving a warning on my System SSD referencing Adobe Exchange. Here is a screen grab to best explain:

Can i install nVidia PCI express graphics card on a ATI X200 motherboard

Is ATI X200 motherboard compatible with nVidia PCI Xpress graphics card(Gforce 6series card)?
My system configuration
AMD Athlon 64 3200+
ATI XPRESS 200 RS482M2 Series Motherboard
512 MB DDR RAM

It is indeed my friend, I have put an NVidea G-Force 6600 PCI-E in a MSI RS482M-IL Motherboard (using the ATI Chipset) and it works a dream , not a problem. The only advantage of using an ATI card is that the catalyst drivers on the CD for the motherboard works with the card!

NVIDIA Quadro FX3800M Graphics Card for PC Laptop

I am looking to buy a new laptop PC.
Does the NVIDIA Quadro FX3800M graphics card work with the Mercury Playback engine.

I can tell you first hand that it works on my laptop with the "soft-hack". I am using a Sager custom build with 3 internal drives and an eSata external drive for my media.
Please feel free to contact me with any questions you may have. My response may be a bit slow as I am on assignment in Afghanistan.
Bill

HP xw8600 nvidia gtx 650 graphics card "cannot start device code 10"

Similar Messages

Maybe you are looking for