HR ABAP Simple Report

in HR ABAP Report
I have Statement saying,,
Read all the action infotype (IT0000) record for the selected employee number from the table PA0000 where MASSN = Hire (01) or Rehire (ZD), BEGDA is Greater than or equal to 19000101 and ENDDA is Less than or equal to 99991231.
Now can I call it using the
Read * or shud I use any other ..
Plz do let me know.
ThankQ
Rohini.

if this the only requirement then don go for the LDBs..
simply do code as below
parameters: p_pernr like pa0000-pernr.
data: begin of itab occurs 0.
include structure pa0001.
data: end of itab.
start-of-selection.
select * from pa0000
into table itab
where pernr eq p_pernr
and ( massn = '01' or massn = 'ZD' )
and begda ge '19000101'
and endda le '99991231'.
*process ur table now
loop at itab.
endloop.
Reward points if helpfull

Similar Messages

Simple Abap PO report with Item text

Hello Abap,
Need some help as am more on functional side and our abaper is 2months holiday.
Need to develop simple reports with the following information.
EKKO-EBELEN,
EKKO-WAERS,
EKPO-EBELP
EKPO-TXZ01
EKPO-MENGE
EKPO-NETPR
EKPO-NETWR
ITEM TEXT (TEXT ID-F01) - 100char to be printed.
Tried to developed from scratch but no luck. Need it asap. Thanks in advance.

Hi,
I don't have test data but I think the following code will give you an idea, try to fill in the FM "READ_TEXT" below with your own parameter (check with table STXH).
REPORT ZTEST.
TYPES: BEGIN OF TY_RESULT,
   EBELN TYPE EKKO-EBELN,
   WAERS TYPE EKKO-WAERS,
   EBELP TYPE EKPO-EBELP,
   TXZ01 TYPE EKPO-TXZ01,
   MENGE TYPE EKPO-MENGE,
   NETPR TYPE EKPO-NETPR,
   NETWR TYPE EKPO-NETWR,
   ITEM_TEXT TYPE CHAR100,
   END OF TY_RESULT.
DATA: GT_EKPO TYPE STANDARD TABLE OF EKPO,
       GS_EKPO TYPE EKPO,
       GT_EKKO TYPE STANDARD TABLE OF EKKO,
       GS_EKKO TYPE EKKO,
       GT_RESULT TYPE STANDARD TABLE OF TY_RESULT,
       GS_RESULT TYPE TY_RESULT,
       LV_TAB_IND TYPE SY-TABIX,
       GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       GS_FIELDCAT TYPE LINE OF SLIS_T_FIELDCAT_ALV,
       GV_NAME TYPE CHAR70,
       GS_TLINE TYPE TLINE,
       GT_TLINE TYPE STANDARD TABLE OF TLINE.
SELECT-OPTIONS: SO_EBELN FOR GS_EKKO-EBELN,
                 SO_WAERS FOR GS_EKKO-WAERS.
START-OF-SELECTION.
   PERFORM SELECTION.
   PERFORM BUILD_FIELDCAT.
   PERFORM DISPLAY.
*&      Form SELECTION
*       text
FORM SELECTION.
   SELECT EBELN WAERS FROM EKKO INTO CORRESPONDING FIELDS OF TABLE GT_EKKO
     WHERE EBELN IN SO_EBELN
     AND WAERS IN SO_WAERS.
   IF GT_EKKO[] IS NOT INITIAL.
     SELECT EBELN EBELP TXZ01 MENGE NETPR NETWR FROM EKPO INTO CORRESPONDING FIELDS OF TABLE GT_EKPO
       FOR ALL ENTRIES IN GT_EKKO
       WHERE EBELN EQ GT_EKKO-EBELN.
     SORT GT_EKPO BY EBELN.
   ENDIF.
   LOOP AT GT_EKKO INTO GS_EKKO.
     CLEAR GS_RESULT.
     CLEAR LV_TAB_IND.
     MOVE-CORRESPONDING GS_EKKO TO GS_RESULT.
     READ TABLE GT_EKPO TRANSPORTING NO FIELDS WITH KEY EBELN = GS_EKKO-EBELN BINARY SEARCH.
     IF SY-SUBRC EQ 0.
       LV_TAB_IND = SY-TABIX.
       LOOP AT GT_EKPO INTO GS_EKPO FROM LV_TAB_IND.
         IF GS_EKKO-EBELN NE GS_EKPO-EBELN.
           EXIT.
         ENDIF.
         MOVE-CORRESPONDING GS_EKPO TO GS_RESULT.
         CONCATENATE GS_RESULT-EBELN GS_RESULT-EBELP INTO GV_NAME.
         CONDENSE GV_NAME NO-GAPS.
         CALL FUNCTION 'READ_TEXT'
           EXPORTING
             CLIENT         = SY-MANDT
             ID             = 'F01'
             LANGUAGE       = SY-LANGU
             NAME           = GV_NAME
             OBJECT         = 'TEXT'
           TABLES
             LINES          = GT_TLINE
           EXCEPTIONS
             NOT_FOUND      = 1.
         LOOP AT GT_TLINE INTO GS_TLINE.
           IF SY-TABIX EQ 1.
             GS_RESULT-ITEM_TEXT = GS_TLINE-TDLINE.
           ELSE.
             CONCATENATE GS_RESULT-ITEM_TEXT GS_TLINE-TDLINE INTO GS_RESULT-ITEM_TEXT.
           ENDIF.
         ENDLOOP.
         APPEND GS_RESULT TO GT_RESULT.
       ENDLOOP.
     ENDIF.
   ENDLOOP.
ENDFORM.                    "SELECTION
*&      Form BUILD_FIELDCAT
*       text
FORM BUILD_FIELDCAT.
   CLEAR GS_FIELDCAT.
   GS_FIELDCAT-COL_POS         = 1.
   GS_FIELDCAT-TABNAME         = 'GT_RESULT'.
   GS_FIELDCAT-FIELDNAME       = 'EBELN'.
   GS_FIELDCAT-SELTEXT_L       = 'Purchasing Document Number'.
   APPEND GS_FIELDCAT TO GT_FIELDCAT.
   CLEAR GS_FIELDCAT.
   GS_FIELDCAT-COL_POS         = 2.
   GS_FIELDCAT-TABNAME         = 'GT_RESULT'.
   GS_FIELDCAT-FIELDNAME       = 'WAERS'.
   GS_FIELDCAT-SELTEXT_L       = 'Currency Key'.
   APPEND GS_FIELDCAT TO GT_FIELDCAT.
   CLEAR GS_FIELDCAT.
   GS_FIELDCAT-COL_POS         = 3.
   GS_FIELDCAT-TABNAME         = 'GT_RESULT'.
   GS_FIELDCAT-FIELDNAME       = 'EBELP'.
   GS_FIELDCAT-SELTEXT_L       = 'Item No'.
   APPEND GS_FIELDCAT TO GT_FIELDCAT.
   CLEAR GS_FIELDCAT.
   GS_FIELDCAT-COL_POS         = 4.
   GS_FIELDCAT-TABNAME         = 'GT_RESULT'.
   GS_FIELDCAT-FIELDNAME       = 'TXZ01'.
   GS_FIELDCAT-SELTEXT_L       = 'Short Text'.
   APPEND GS_FIELDCAT TO GT_FIELDCAT.
   CLEAR GS_FIELDCAT.
   GS_FIELDCAT-COL_POS         = 5.
   GS_FIELDCAT-TABNAME         = 'GT_RESULT'.
   GS_FIELDCAT-FIELDNAME       = 'MENGE'.
   GS_FIELDCAT-SELTEXT_L       = 'Purchase Order Quantity'.
   APPEND GS_FIELDCAT TO GT_FIELDCAT.
   CLEAR GS_FIELDCAT.
   GS_FIELDCAT-COL_POS         = 6.
   GS_FIELDCAT-TABNAME         = 'GT_RESULT'.
   GS_FIELDCAT-FIELDNAME       = 'NETPR'.
   GS_FIELDCAT-SELTEXT_L       = 'Net Price'.
   APPEND GS_FIELDCAT TO GT_FIELDCAT.
   CLEAR GS_FIELDCAT.
   GS_FIELDCAT-COL_POS         = 7.
   GS_FIELDCAT-TABNAME         = 'GT_RESULT'.
   GS_FIELDCAT-FIELDNAME       = 'NETWR'.
   GS_FIELDCAT-SELTEXT_L       = 'Net Order Value'.
   APPEND GS_FIELDCAT TO GT_FIELDCAT.
   CLEAR GS_FIELDCAT.
   GS_FIELDCAT-COL_POS         = 8.
   GS_FIELDCAT-TABNAME         = 'GT_RESULT'.
   GS_FIELDCAT-FIELDNAME       = 'ITEM_TEXT'.
   GS_FIELDCAT-SELTEXT_L       = 'Item Text'.
   APPEND GS_FIELDCAT TO GT_FIELDCAT.
ENDFORM.                    "BUILD_FIELDCAT
*&      Form DISPLAY
*       text
FORM DISPLAY.
   CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
       I_CALLBACK_PROGRAM      = SY-REPID
       IT_FIELDCAT             = GT_FIELDCAT[]
     TABLES
       T_OUTTAB                = GT_RESULT
     EXCEPTIONS
       PROGRAM_ERROR           = 1
       OTHERS                  = 2.
   IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.
ENDFORM.                    "DISPLAY
Thanks.
Regards,
Keng Haw

Simple report on ABAP OBJECTS

Hi Experts,
Can any body send one simple report using abap object....
Thanks
kris

Hi,
Check this example..
CLASS MY_CLASS DEFINITION.
PUBLIC SECTION.
METHODS: ADDITION IMPORTING IP_1 TYPE INT4
IP_2 TYPE INT4
EXPORTING OP_1 TYPE INT4,
SUBTRACTION IMPORTING IP_1 TYPE INT4
IP_2 TYPE INT4
EXPORTING OP_1 TYPE INT4.
ENDCLASS.
CLASS MY_CLASS IMPLEMENTATION.
METHOD ADDITION.
OP_1 = IP_1 + IP_2.
ENDMETHOD.
METHOD SUBTRACTION.
OP_1 = IP_1 - IP_2.
ENDMETHOD.
ENDCLASS.
START-OF-SELECTION.
DATA: OBJ TYPE REF TO MY_CLASS.
CREATE OBJECT OBJ.
DATA: V_OUTPUT TYPE INT4.
CALL METHOD OBJ->ADDITION EXPORTING IP_1 = 1
IP_2 = 3
IMPORTING OP_1 = V_OUTPUT.
WRITE: / V_OUTPUT.
Thanks,
Naren

ABAP list report, multiple selections - select-options

I have written a very simple ABAP list report, that contains a single select-option. On the selection screen, I have the option of entering multiple values, with each new value being displayed directly underneath the old, but I am only getting the first value entered on the screen displayed. Does anyone have any sample code for me?

Hi Daniel,
Select_Options consists of 4 parameters, in with the range consists in eg...
Select-options s_vbeln for vbak-vbeln.
then s_vbeln-low, s_vbeln-high are the range values...
So whne you write select query.
write vbeln in s_vbeln
instead of vbeln eq s_vbeln
Hope this solves your problem.
Thanks & Regards,
Dileep .C

Problem when down loading a simple report to Excel sheet

HI Frenz,
When I download a Simple report to excel , The Excel shows a blank column in between two column, which should not be the case.
Kindly let me know ASAP
Regards
Irfan

Hi,
Check out the below samle code
Download a report to excel with format (border, color cell, etc)
REPORT ZSIRI NO STANDARD PAGE HEADING.
* this report demonstrates how to send some ABAP data to an
* EXCEL sheet using OLE automation.
INCLUDE OLE2INCL.
* handles for OLE objects
DATA: H_EXCEL TYPE OLE2_OBJECT,        " Excel object
      H_MAPL TYPE OLE2_OBJECT,         " list of workbooks
      H_MAP TYPE OLE2_OBJECT,          " workbook
      H_ZL TYPE OLE2_OBJECT,           " cell
      H_F TYPE OLE2_OBJECT.            " font
TABLES: SPFLI.
DATA H TYPE I.
* table of flights
DATA: IT_SPFLI LIKE SPFLI OCCURS 10 WITH HEADER LINE.
*&   Event START-OF-SELECTION
START-OF-SELECTION.
* read flights
SELECT * FROM SPFLI INTO TABLE IT_SPFLI UP TO 10 ROWS.
* display header
ULINE (61).
WRITE: /     SY-VLINE NO-GAP,
          (3) 'Flg'(001) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (4) 'Nr'(002) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (20) 'Von'(003) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (20) 'Nach'(004) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (8) 'Zeit'(005) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP.
ULINE /(61).
* display flights
LOOP AT IT_SPFLI.
WRITE: / SY-VLINE NO-GAP,
           IT_SPFLI-CARRID COLOR COL_KEY NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CONNID COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CITYFROM COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CITYTO COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-DEPTIME COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP.
ENDLOOP.
ULINE /(61).
* tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
*           PERCENTAGE = 0
           TEXT       = TEXT-007
       EXCEPTIONS
            OTHERS     = 1.
* start Excel
CREATE OBJECT H_EXCEL 'EXCEL.APPLICATION'.
* PERFORM ERR_HDL.
SET PROPERTY OF H_EXCEL 'Visible' = 1.
* CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'c:\kis_excel.xls'
* PERFORM ERR_HDL.
* tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
*           PERCENTAGE = 0
           TEXT       = TEXT-008
       EXCEPTIONS
            OTHERS     = 1.
* get list of workbooks, initially empty
CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
PERFORM ERR_HDL.
* add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP.
PERFORM ERR_HDL.
* tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
*           PERCENTAGE = 0
           TEXT       = TEXT-009
       EXCEPTIONS
            OTHERS     = 1.
* output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
PERFORM FILL_CELL USING 1 3 1 'Von'(003).
PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
LOOP AT IT_SPFLI.
* copy flights to active EXCEL sheet
    H = SY-TABIX + 1.
    PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
    PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
    PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
    PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
    PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
ENDLOOP.
* changes by Kishore - start
* CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
CALL METHOD OF H_EXCEL 'Worksheets' = H_MAPL." EXPORTING #1 = 2.
PERFORM ERR_HDL.
* add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP EXPORTING #1 = 2.
PERFORM ERR_HDL.
* tell user what is going on
SET PROPERTY OF H_MAP 'NAME' = 'COPY'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
*           PERCENTAGE = 0
           TEXT       = TEXT-009
       EXCEPTIONS
            OTHERS     = 1.
* output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
PERFORM FILL_CELL USING 1 3 1 'Von'(003).
PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
LOOP AT IT_SPFLI.
* copy flights to active EXCEL sheet
    H = SY-TABIX + 1.
    PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
    PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
    PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
    PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
    PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
ENDLOOP.
* changes by Kishore - end
* disconnect from Excel
*      CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'C:\SKV.XLS'.
FREE OBJECT H_EXCEL.
PERFORM ERR_HDL.
*       FORM FILL_CELL                                                *
*       sets cell at coordinates i,j to value val boldtype bold       *
FORM FILL_CELL USING I J BOLD VAL.
CALL METHOD OF H_EXCEL 'Cells' = H_ZL EXPORTING #1 = I #2 = J.
PERFORM ERR_HDL.
SET PROPERTY OF H_ZL 'Value' = VAL .
PERFORM ERR_HDL.
GET PROPERTY OF H_ZL 'Font' = H_F.
PERFORM ERR_HDL.
SET PROPERTY OF H_F 'Bold' = BOLD .
PERFORM ERR_HDL.
ENDFORM.
*&      Form ERR_HDL
*       outputs OLE error if any                                       *
* --> p1        text
* <-- p2        text
FORM ERR_HDL.
IF SY-SUBRC <> 0.
WRITE: / 'Fehler bei OLE-Automation:'(010), SY-SUBRC.
STOP.
ENDIF.
ENDFORM.                    " ERR_HDL
Cheers,
Chandru

Simple report for lock users not actives in last 30 days ?

Hi, we need code in SE38 simple report for lock all users not actives in last 30 days.
This sample is good but need check : user its inactive in last 30 days.
http://www.sap-basis-abap.com/abap019.htm
Thank you.

You do not need a report to do this. The instance parameter
login/password_max_idle_productive
will do this for you.
Cheers
Graham Robbo

Simple reports

Hi
Gud Morning . I am Srikanth from hyderabad . I would like to know the following :-
   1) Difference between simple reports and complex reports
   2) Seqential procedure for creating SIMPLE REPORTS
   3) FAQ's on SIMPLE REPORTS
Regards,
M.Srikanth

How many types of reports are there in ABAP and what is the difference between them?
Answer
In ABAP, there are a total of 7 types of reports. They are:
Classical
Interactive
Logical Database
ABAP query
ALV Reports (ALV stands for ABAP List Viewer)
Report Writer/Report Painter
drill down reports
Classical ReportsEdit section
These are the most simple reports. Programmers learn this one first. It is just an output of data using the Write statement inside a loop.
Classical reports are normal reports. These reports are not having any sub reports. IT IS HAVING ONLY ONE SCREEN/LIST FOR OUTPUT.
Events In Classical Reports.
INTIALIZATION: This event triggers before selection screen display.
AT-SELECTION-SCREEN: This event triggers after proccesing user input still selection screen is in active mode.
START OF SELECTION: Start of selection screen triggers after proceesing selection screen.
END-OF-SELECTION : It is for Logical Database Reporting.
Interactive Reports
As the name suggests, the user can Interact with the report. We can have a drill down into the report data. For example, Column one of the report displays the material numbers, and the user feels that he needs some more specific data about the vendor for that material, he can HIDE that data under those material numbers. And when the user clicks the material number, another report (actually sub report/secondary list) which displays the vendor details will be displayed.
We can have a basic list (number starts from 0) and 20 secondary lists (1 to 21). Events associated with Interactive Reports are: 1. AT LINE-SELECTION 2. AT USER-COMMAND 3. AT PF<key> 4. TOP-OF-PAGE DURING LINE-SELECTION. HIDE statement holds the data to be displayed in the secondary list. sy-lisel : contains data of the selected line. sy-lsind : contains the level of report (from 0 to 21)
Interactive Report Events:
AT LINE-SELECTION : This Event triggers when we double click a line on the list, when the event is triggered a new sublist is going to be generated. Under this event what ever the statements that are been return will be displayed on newly generated sublist.
AT PFn: For predefined function keys...
AT USER-COMMAND : It provides user functions keys.
Logical Database ReportsEdit section
Logical database is another tool for ABAP reports. Using LDB we can provide extra features for ABAP reports.
ABAP Query Reports
ABAP query is another tool for ABAP. It provides efficency for ABAP reports. These reports are very accurate.
Transaction Code : SQ01
Report Writer
Key Concept :
Super users and end users can use Report Painter/Report Writer tools to write their own reports.
Giving them the ability to report on additional fields at their discretion shifts the report maintenance burden to them, saving SAP support groups time and effort normally spent creating and maintaining the reports.
Instead of using ABAP code to write a report in FI and CO, many users build a Report Painter/ Report Writer library using transaction MC27.
However, this workaround has some drawbacks. Little known transaction GRCT solves these problems in most cases, and eliminates the need to use transaction MC27.
ABAP Report Types
ABAP report types are those ones available in some report's attributes screen, i.e. :
Executable program
Function group (containing function modules)
Include
Interface pool
Class pool
Module pool
Subroutine pool
Also ALV means ABAP List Viewer. Most convenient way to use it is through reuse library (cf. transaction se83) available from release 4.6 of SAP R/3.
ALV is available in two modes: list and grid. List mode is good old list processing with standard functionnalities, and grid mode is using a new OCX object displaying grids

Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi - [.....] - RTBUIP_Build_Invoke.vi.ProxyCaller

Hi all,
I am on a field campaign with my Labview-controlled instrument. I wanted to make a small change to the code and build it again for uploading to a cFP-2020 Fieldpoint but the application builder stopped with the following error message:
Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi -> ABAPI Dist Cmp Settings to Disk Hier.vi -> ABAPI Get Settings From File2.vi -> ABAPI Get Settings From File.vi -> RTBEP_Invoke_Build_Engine.vi -> RTBUIP_Build_Invoke.vi -> RTBUIP_Build_Invoke.vi.ProxyCaller
This is another computer than the one I used in the lab previously so might have forgotten to install something. I just copied the whole application folder with project file and subfolders
to the Laptop I am using now. Labview version should be the same though (8.20).
Any suggestions?
Olaf

Hello Olaf,
This error is usually found when a subVI or a support file (DLL, custom control, etc)
isn't able to be found by the application builder. Possible reasons
for this could include subVIs no longer located in their original
paths and in need to be relinked, a DLL that isn't included in the build,
and many other possibilities.
You wrote that you copied the project from another PC, so it is very possible that some file went missing. Are all VIs in your project executable?
You could try to mass compile all the VIs in your project and see if that helps.
Regards,
Johannes
AE, NI Germany

Generate a simple report in XML publisher

Hello,
I have a simple Oracle Report 9i which displays data from four tables. It uses three different queries to get the data. How can I simply generate a similar report in XMLP without using the oracle report? I tried joining the queries (like outer join) but wasn't able to get the format which report 9i was generating.
Each table has two columns to be equated with other tables among the four i.e (A.c1=B.c1 AND A.c2=B.c2). The results are displayed in a hierarchial manner. Could anyone please help me out with a clear approach? Please let me know if I need to be more clear.
-Sitaram.

Check out in BIP user guide, fior sample simple reports.
to give you an overview ,this is the way BIP works ,
you create code to genrate the xml through any method from DB.
and Bip merges the xml and your template to get you the output you wanted.
BIP does more than what i have said, just go thru user guide :)
if you are expecting some help from your xml and xsl code,
paste your xml here and your xplanation , what you are expecting.

ABAP Custom Report (ALV Format) in Background Processing

Hi
I am not the hardcore ABAP Person. But want to know about the detail fact of the ABAP Custome Reports. The question is can we do the background processing for the ABAP Custome Report in ALV Format.
If Yes ..do we require to have any additional Function/code to get the spool in ALV Format. I saw the comments that the output will look like the mess.
Please share your comment or any useful documenation on this. We are in ECC 6.0
Thanks in advance..and yes it will be rewared by points.
Navin

You can use alv's in background using docking containers, but the display wont be interactive. If you search the forum you will see tons of threads which talk about running ALV's in background.
For the output to be interactive, you can run the report in foreground and do the data processing in background.
Refer this link:
Displaying ALV Grid in Background Job

BOE XI 3.1: Problem with Simple Report Filter.

Hi everyone!.
One requirement that i have in one customer is about the use of simple reports filters, the customer doesn't want to use the input controls.
If i add one simple report filter and save the report, the final user can add other simple report filters, but the problem is that the name "Others" appears with all the variables than i have created to be used in the report.
Is it possible to hide the group "Others"?
Thanks!
Edited by: Jaime Pestaña on Mar 12, 2010 10:26 AM

If I understood you clearly, I think you have few variables created and one set of variable is called Others and you dont want users to see it.
There are couple of things you can do.
First one is to Use Othere filters as constant and it will not appear.
Second you can use others filter at Report level and it will not prompt to users.
Bashir Awan

How to write ABAP HR reports in ABAP web dynapro

Hi All,
How to write ABAP HR reports in ABAP web dynapro? We can add HR REPORT CATEGORY in ABAP HR using logical database like PNP.How to add HR REPORT CATEGORY in ABAP Webdynapro ?
Thanks.

You can't use legacy concepts like logical databases directly in Web Dynpro ABAP. Even if you could do so, you shouldn't. Web Dynpro ABAP should always follow MVC - meaning that your business logic (the model) should be separated from WD as much as possible. This means calling function modules or class methods to consume the business logic and data. So in general there should be no difference between building HR reports or any other type of report in WDA - since from the WDA side you are calling other objects to consume the data.
This probably does mean that you will need to create classes to expose the HR data that you want in your WDA.

Problem in displaying selection screen of a abap-hr report

Hi,
I have developed a abap-hr report in ver..6.2.I have used logical data base PNP for it.It was working fine.
But when i migrate it into ver.4.6, I can see no selection screen for the report.
How to get the selection-screen?
Please help me through.
Thanks in advance,
Raj.
Edited by: raj b on Feb 20, 2008 8:00 AM

Hi Raj,
Please check whether you have assigned any report category for the PNP selection screen in the version 6.2.
The report category might not exist in the 4.6 version and that might be the reason the selection screen is not appearing.
Cheers,
Aditya

Nodes statement in payroll in SAP ABAP hr Report

hi,
i am working in sap abap hr report for payroll.i am using nodes statement in that report.it is showing error that ""PERNR" is not a node of the logical database __S".how can i solve this error.in this report.
NODES pernr .
INFOTYPES: 0000, 0001, 2001.
TABLES: t554s, pcl1, pcl2.
INCLUDE rpclst00.
INCLUDE rpc2rx09.                      "Payroll results datadefns-Intl.
INCLUDE rpc2rxx0.                      "Payroll results datadefns-Intl.
INCLUDE rpc2rgg0.                      "Payroll results datadefns-GB
INCLUDE rpcfdcg0.                      "Payroll results datadefns-GB
INCLUDE rpcdatg0.
INCLUDE rpc2cd00.                      "Cluster Directory defns.
INCLUDE rpc2ps00.                      "Cluster: Generierte Schematas
INCLUDE rpc2pt00.
INCLUDE rpcfdc10.
INCLUDE rpcfdc00.
INCLUDE rpppxd00.
INCLUDE rpppxd10.
INCLUDE rpcfvp09.
INCLUDE rpcfvpg0.
INCLUDE rpppxm00.
TYPES: BEGIN OF t_salrate,
    seqnr    TYPE pc261-seqnr,
    begda    TYPE p2001-begda,
    endda    TYPE p2001-endda,
    split(2) TYPE c,
    val      TYPE p DECIMALS 2,
   END OF t_salrate.
DATA: it_salrate TYPE STANDARD TABLE OF t_salrate INITIAL SIZE 0,
      wa_salrate TYPE t_salrate.
*Selection screen
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: so_awart FOR p2001-awart.
SELECTION-SCREEN END OF BLOCK block1.
*START-OF-SELECTION.
START-OF-SELECTION.
GET pernr.
get payroll results data
rp-init-buffer.
CLEAR rgdir. REFRESH rgdir.
CLEAR rt. REFRESH rt.
CLEAR: rx-key.
set key to current pernr
MOVE pernr-pernr(8) TO cd-key-pernr.
retrieves payroll results for specific pernr(personnel number)
rp-imp-c2-cd.
IF rp-imp-cd-subrc = 0.                                "rgdir success
    rx-key-pernr = pernr-pernr.
    SORT rgdir BY seqnr ASCENDING.
    CLEAR rgdir.
ENDIF.
SORT rgdir BY fpbeg fpend ASCENDING seqnr DESCENDING.
RGDIR the table where all payroll results periods are stored
LOOP AT rgdir WHERE abkrs IN pnpabkrs        "pay area
                  AND srtza EQ 'A'
                  AND void NE 'V'.
    IF sy-subrc NE 0.
    set key to specific payroll results period(current RGDIR loop pass)
      UNPACK rgdir-seqnr   TO   rx-key-seqno.
    Retrieves data for specific payroll results period (current RGDIR
    loop pass)
      rp-imp-c2-rg.
    Loop at wpbp data for specific payroll results period
      LOOP AT wpbp.
        wa_salrate-seqnr = rgdir-seqnr.
        wa_salrate-begda = wpbp-begda.
        wa_salrate-endda = wpbp-endda.
        wa_salrate-split = wpbp-apznr.
      loop at rt data for specific payroll results period
        LOOP AT rt WHERE lgart EQ '/010' AND             "wage type
                         apznr EQ wpbp-apznr.            "payroll split
          wa_salrate-val = ( rt-betpe * ( wpbp-adivi / wpbp-kdivi ) ).
          APPEND wa_salrate TO it_salrate.
        ENDLOOP.
      ENDLOOP.
    Process BT table
      LOOP AT BT.
      ENDLOOP.
    Process NIPAY table
      LOOP AT NIPAY.
      ENDLOOP.
    etc................
    ENDIF.
ENDLOOP.
*END-OF-SELECTION.
END-OF-SELECTION.

Hi,
Have you put a Logical Database in the attributes of the program that you have created ?
Regards,
Samson Rodrigues.

Report for time log on detail for each employees in SAP ABAP-HR report

hi experts,
      please help me .how to create a report for time log on detail for each employees in SAP ABAP-HR report.please help me.
                                                  thank you

Hi,
For Time Management Infotypes , If you want to read the data using macro you need to use the Macro called RP_READ_ALL_TIME_ITY
Example:
DATA: BEGDA LIKE P2001-BEGDA, ENDDA LIKE P2001-ENDDA.
   INFOTYPES: 0000, 0001, 0002, ...
                     2001 MODE N, 2002 MODE N, ...
     GET PERNR.
   BEGDA = '19900101'. ENDDA = '19900131'.
   RP_READ_ALL_TIME_ITY BEGDA ENDDA.
   IF PNP-SW-AUTH-SKIPPED-RECORD NE '0'.
      WRITE: / 'Authorization for time data missing'.
      WRITE: / 'for personnel number', PERNR-PERNR. REJECT.
   ENDIF.

HR ABAP Simple Report

Similar Messages

Maybe you are looking for