HR_MAINTAIN_MASTERDATA, buffer gives old data

Hi All,
We are using a module pool program that facilitates hiring of employees. A user who performs hiring action, uses this program and updates records that get updated in R3 PA tables.
The problem is when the user tries to update a batch of records. It works fine for the first record but for the second, it displays the details of the first. (if my 2nd employee is Y, the details of emp X still get displayed)
We are using HR_INFOTYPE_OPERATION for this. I debugged and found that HR_MAINTAIN_MASTERDATA is used inside. A perform called GET_INFOTYP_BUFFER in mainitain_masterdata gets the data from buffer (which is of the old record and not the new one)..Why is the buffer still having the old record details? How to refresh the buffer?
Regards,
Aruna Nivetha.R

Hi Shrinivas,
That dint help much. Even when I used HR_INITIALIZE_BUFFER, the problem still persists....
Any other clue?
Regards,
Aruna Nivetha.R

Similar Messages

Webi report gives old data in infoview on refresh

Hi Experts,
We are facing this strange issue on a webi report after some data updation in the SAP BW infocube.
The webi report is based on the universe which is connected to an infocube in our BW dev system. After some data updation in the cube, we had tested the report in webi rich client and everything was working fine (the newly updated data from cube was reflecting). Now, we had tested the same report in infoview, but it was showing the old data only. We had tried exporting the report once again to infoview, refreshed universe structure; but without any success.
What appeared to be even more strange was that the last refresh time was also not changing. While running the report in the infoview it hardly takes 40secs. But on refreshing it says the last refresh time was 5mins.
Any help on this would be highly appreciated.
Regards,
Arun.

it sounds like when you refresh report in Infoview you get the cached data, it never goes to the DB to fetch new one...
You'll need to enable traces on webi processing server as well as SOFA/MDX tracing and review log files to see if requests are going to db or not and what is being returned.
It could be at webi proc level or at your BW level.
You can also try disabling webi caching in webi proc server properties and see what happens.

Logon_time in v$session gives old date for new session

Hi,
I have a unique issue whenever I run v$session for username='A' and status= active I see logon_time as old date in this its '12-MAY-2008'. Now there are total 150 sessions for username='A'. 2 are status= Active, 1 is status=Killed and 147 are status=INACTIVE.
So whenever a new session comes from application side it activates the INACTIVE session and date remains 12-May-2008 instead of current date.
Also when you logon directly to Oracle using user 'A' , again same logon_time in v$session, rather than current date in logon_time. We are using Oracle 9.2.0.6 on Unix.
Any way I can resolve this issue?
Regards,
Tushar Kathe

Hi,
select username,logon_time,machine,terminal from v$session where status='ACTIVE';
USERNAME LOGON_TIM MACHINE TERMINAL
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
SYS 22-MAY-08 prod1.test.com
pts/4
TEST 12-MAY-08 app20.test.com
SYS 22-MAY-08
16 rows selected.
You can see the schema test shows logon_time as 12-May-08 but he has infact logon in the system today so should have today's date. The Toad time output I don't have.
Regards,
Tushar Kathe

Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?

Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?

Place the device in DFU mode (google it) and restore as new.

I am looking into Buying Retail a New Blackberry Q10. Doing this to avoid having to Give up my old Data Plan. Have read that when you activate a new Phone it forces you to pick a new Plan. Is this True? and How to I avoid this? 20 Year Verizon Client

I am looking into Buying Retail a New Blackberry Q10. Doing this to avoid having to Give up my old Data Plan. Have read that when you activate a new Phone it forces you to pick a new Plan. Is this True? and How to I avoid this? Any other advise in this matter would be greatly appreciated.
20 Year Plus Verizon Client

The only "unlimited" plan I can think of where this would not apply is the old Connect plan for multimedia/basic phones. That unlimited data, on devices such as the LG Voyager, EnvTouch, and other "multimedia" devices is not the same.
If you currently have an individual $29.99 unlimited data plan with a 3G Smartphone, then you can buy a BBQ10 retail and activate it with the same data plan and keep the unlimited.

How can I tell this FM to update the buffer before reading data??

Hi All,
I have developed a Web Dynpro Application that calls a FM.
Values are written into the database (I use a standard FM for that).
After that, values a read from the database to be show in the Web Dynpro Application again (Again, using a standard FM).
However, the data is not being updated, that is, the data delivered by the function module is not the updated, new data, but the old data.
If I select the data using simple select statements, ist is provided correctly (new data). That means the database already has the correct data, but the FM uses some sort of buffer which does not seem to be up to date at this point in time...
How can I tell the FM to update is buffers before being acually executed?
The function module in question is called HRIQ_ACAD_READ_TIMELIMITS, but I don't think this information is required to answer my question.
THANKS, Johannes

aye, thats ecaxtly what i meant.
Displaying the data in a new process. i know this is not what you finally want, but if the data is correct in your new process we might get better ideas what is causing your buffer problems.
BTW is your system scaled? do you have more than one application server and may this be a synchronisation error?

Old data capture

Is there any option to capture old data from tally 7.2 to Sap B1.

Hi Monika,
SAP gives you the Data Transfer Workbench tool for it.
Inside this tool you have lots of different excel templates for the objects. You should transform the data from tally to the right format for the DTW(which is sometimes hard).
Hope that helps,
Ibai Peñ

How old data file replace with new 10g installed datafile

Sir
I my 10g is corrupt
I copy all 10g folder in other my usb and install new 10g with same name
I want to use all old user and data from usb
Please give me which folder or datafile change with new file
Old 10g database file mfa10g
New 10g database file mfa10g
How use old data and user
Please give me step by step detail
Thank you

Before I attempt to answer,answer the following questions
1)Which o/s you are working upon?
2)When you say files are corrupted,which files are corrupted,database files or software files?
3)Which files you have copied?Your oracle database files ?
For the last part,
Please give me which folder or datafile change with new file
Old 10g database file mfa10g
New 10g database file mfa10g
You can't just put one file from somewhere and "plug-in" with your database.Either you have to recover that file which has another complications or you have to restore the entire old database.
Answer the questions that I have just asked.This will help for a better answer .
Aman....

BAPI_INCOMINGINVOICE_GETDETAIL returns "old" data

Hello,
I have developed some WF which handles incomming invoices but also have some Z tables behind.
I will describe my problem now. One of the tasks opens a secondary screen with tx MIR7, on a primary screen there is a button which reads data from invoice. Steps are:
1. user opens a task - he has a screen with some data
2. wf automaticallly opens a secondary window with MIR7 (so user can switch between two sap windows with e.g. alt+tab)
3. user make some changes in MIR7 and save invoice
4. user click the button in the primary window -> action which reads data from invoice with BAPI_INCOMINGINVOICE_GETDETAIL -> sometimes this function returns "old" data.
Do u know if the data from MIR7 are saved in some update task, or are they buffered, or....? how can i avoid this?
thx,
JJ

hi..
U have to give vendor invoice number for it to work. The invoice should be posted in MM, if u post in FI this BAPI wont work.
MIR4: In this tcode, you can display the vendor invoice numbers.
MIR5: THIS CODE gives the list of available invoice documents.
Regards,
VIshwa.

MI Deployment does not work - Client reports "Ignored old data"

Hi,
when syncing with an mi client (Mi2.5 SP13) to deploy MAM application. The Client reports:
Ignored old data that has been received for user XXX
The Trace-File says:
[20050906 10:28:45:953] I [MI/Sync                  ] Inbound file size for user xxx is 102
[20050906 10:28:45:953] P [MI/Sync                  ] Synchronisation successfully connected
[20050906 10:28:45:953] D [MI/Sync                  ] Begin: Dumping file C:\Programme\SAP Mobile Infrastructure\sync\xxx\in\inbound.sync
<ID>MISYNC</ID><FLAGS>0x0</FLAGS><VERSION>251300</VERSION>
<PROLOG>
<JCO_INFO>JCO-library-version: 1.1.13; Creation time: UNDEFINED DATE UNDEFINED TIME</JCO_INFO>
<SYNC_STATUS>A</SYNC_STATUS>
<EXECUTION_TIME></EXECUTION_TIME>
<MORE_PACKAGES_WAITING> </MORE_PACKAGES_WAITING>
<SYNC_COUNTER>0</SYNC_COUNTER>
</PROLOG>
[20050906 10:28:45:953] D [MI/Sync                  ] End: Dumping file C:\Programme\SAP Mobile Infrastructure\sync\xxx\in\inbound.sync
[20050906 10:28:45:953] D [MI/Sync                  ] Initial buffer size of BinaryReader is 102
[20050906 10:28:45:953] P [MI/Sync                  ] Read current inbound counter from file: 0
[20050906 10:28:45:953] W [MI/Sync                  ] Execution time is not set; either old data received or processing wihtin middleware failed.
I have deleted any old assignments for the user and the device through the web console.
The problem consists after uninstall and reinstall of the mi client also on different devices.
Any ideas?
Thanks in advance
Alexander

Thanks for your help so far.
I did already install and reinstall the client.
I get this error for some, also newly created users and for others on the same machine it works!
I think it is related to the trace file row:
<JCO_INFO>JCO-library-version: 1.1.13; Creation time: UNDEFINED DATE UNDEFINED TIME</JCO_INFO>
This obviously leads to the conclusion that the data is outdated for the client.
The client and server are in the same timzone and also configured that way.
Any other ideas?
Thanks
Alexander

How can we give the Data Format (File Type ) in Runtime

Hi all,
How can we give the Data Format (File Type ) in Runtime for the following method,
cl_gui_frontend_services=>gui_download.
Thanks in advance
Sri

There is a filetype parameter which you can set
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
*    BIN_FILESIZE              =
    filename                  =
*    FILETYPE                  = 'ASC'
*    APPEND                    = SPACE
*    WRITE_FIELD_SEPARATOR     = SPACE
*    HEADER                    = '00'
*    TRUNC_TRAILING_BLANKS     = SPACE
*    WRITE_LF                  = 'X'
*    COL_SELECT                = SPACE
*    COL_SELECT_MASK           = SPACE
*    DAT_MODE                  = SPACE
*    CONFIRM_OVERWRITE         = SPACE
*    NO_AUTH_CHECK             = SPACE
*    CODEPAGE                  = SPACE
*    IGNORE_CERR               = ABAP_TRUE
*    REPLACEMENT               = '#'
*    WRITE_BOM                 = SPACE
*    TRUNC_TRAILING_BLANKS_EOL = 'X'
* IMPORTING
*    FILELENGTH                =
changing
    data_tab                  =
* EXCEPTIONS
*    FILE_WRITE_ERROR          = 1
*    NO_BATCH                  = 2
*    GUI_REFUSE_FILETRANSFER   = 3
*    INVALID_TYPE              = 4
*    NO_AUTHORITY              = 5
*    UNKNOWN_ERROR             = 6
*    HEADER_NOT_ALLOWED        = 7
*    SEPARATOR_NOT_ALLOWED     = 8
*    FILESIZE_NOT_ALLOWED      = 9
*    HEADER_TOO_LONG           = 10
*    DP_ERROR_CREATE           = 11
*    DP_ERROR_SEND             = 12
*    DP_ERROR_WRITE            = 13
*    UNKNOWN_DP_ERROR          = 14
*    ACCESS_DENIED             = 15
*    DP_OUT_OF_MEMORY          = 16
*    DISK_FULL                 = 17
*    DP_TIMEOUT                = 18
*    FILE_NOT_FOUND            = 19
*    DATAPROVIDER_EXCEPTION    = 20
*    CONTROL_FLUSH_ERROR       = 21
*    NOT_SUPPORTED_BY_GUI      = 22
*    ERROR_NO_GUI              = 23
*    others                    = 24

How do I use old data files with a new installation in Oracle 9i

I am in an unenviable position, with an unsupported database.
We are running Oracle 9i on Windows XP. We are upgrading soon to Oracle 11g on a newer platform, but need to get our development environment working first.
We lost a system that was running our development database without having a database export. The C drive was placed into a new system as the D drive.
I have loaded Oracle 9i on the C drive, but I have been unable to determine how to point it to the existing data files on the D drive. My search skills may be the limiting factor here...
We cannot simply load the drive as C, since the hardware is different.
What are the steps to point the new database software at the data files on the D drive? Or, how do I copy the old data files into the new Oracle Home and have them recognized properly?
Thanks for any advice.

user3930585 wrote:
I am in an unenviable position, with an unsupported database.
We are running Oracle 9i on Windows XP. We are upgrading soon to Oracle 11g on a newer platform, but need to get our development environment working first.
We lost a system that was running our development database without having a database export. The C drive was placed into a new system as the D drive.
I have loaded Oracle 9i on the C drive, but I have been unable to determine how to point it to the existing data files on the D drive. My search skills may be the limiting factor here...
We cannot simply load the drive as C, since the hardware is different.
What are the steps to point the new database software at the data files on the D drive? Or, how do I copy the old data files into the new Oracle Home and have them recognized properly?
Are you stating that you don't know how to use COPY command?
Can you recreate same directory structure on new C drive as exist on old C drive?
Can you then drag & drop copies of the files?

JSP page is coming back with old data even when DB updated

Hello,
I am updating an existing record on a database using an HTML form and the changes update the ACCESS database immediately, but the .jsp page is picking up
old data.
But but when i do a manual REFRESH, the correct data comes back fine!
Thanks very much for any insights!
Summary of the code:
1. InputEmployeeInfo.html - enter change data, call update....jsp
<HEAD> <meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/> </HEAD>
<FORM NAME="updateInfo"
ACTION="./UpdateEmployeeInfo.jsp" >>>>>2.
METHOD="POST">
2. UpdateEmployeeInfo.jsp: - call bean, update database, forward to present..jsp
<HEAD> <meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/>
</HEAD>
<% response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
response.setDateHeader ("Expires", 0); %>
<jsp:useBean id="empInfo"
class="com.ora.jsp.beans.employee23.EmployeeInfoBean" >>>>>3.
scope="request"/>
<jsp:setProperty name="empInfo" property="*" />
<% empInfo.updateDatabase(); %> >>>>>3b.
<jsp:forward page="PresentChangeOfEmployeeData.jsp" /> >>>>>4.
</BODY>
</HTML>
3. com.ora.jsp.beans.employee23.EmployeeInfoBean - Bean-update DB with change data
public class EmployeeInfoBean {
public void updateDatabase(){                                            <----3b.
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver").newInstance();
Connection conn =
DriverManager.getConnection("jdbc:odbc:example");
String sql = "UPDATE EMPLOYEEINFO SET " +
"NAME=?, ADDRESS=?, PHONE=? WHERE ID=?";
PreparedStatement statement = conn.prepareStatement(sql);
statement.setString(1, name);
statement.setString(2, address);
statement.setString(3, phone);
statement.setInt(4, id);
statement.executeQuery();
statement.close();
conn.close();
4. PresentChangeOfEmployeeData.jsp - read database and display changes <----4.
<HEAD> <meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/>
</HEAD>
<% response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
response.setDateHeader ("Expires", 0); %>
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver").newInstance();
Connection conn =
DriverManager.getConnection("jdbc:odbc:example");
Statement statement = conn.createStatement();
String sql = "SELECT * FROM EMPLOYEEINFO WHERE ID = " + employeeID;
ResultSet rs = statement.executeQuery(sql);
while(rs.next()){
%>
<TR><TD ALIGN="right" WIDTH="50%">Name:</TD>
<TD WIDTH="50%"><%= rs.getString("NAME") %></TD>
================================================================================
Complete code listing:
1, InputEmployeeInfo.html
<HTML>
<HEAD>
<meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/>
<TITLE>Change of Information</TITLE>
</HEAD>
<BODY>
<TABLE WIDTH="100%" BORDER="0" BGCOLOR="navy">
<TR ALIGN="center">
<TD><FONT SIZE="7" COLOR="yellow">Employee Information</FONT></TD>
</TR>
</TABLE>
<CENTER>
<FONT SIZE="5" COLOR="navy">
Please Enter Your Information<BR>
Fill in all fields
</FONT>
</CENTER>
<TABLE WIDTH="100%">
<FORM NAME="updateInfo"
ACTION="./UpdateEmployeeInfo.jsp" >>>>>>>>>2.
METHOD="POST">
<TR><TD WIDTH="40%" ALIGN="right">Current ID: </TD>
<TD WIDTH="60%"><INPUT TYPE="text" NAME="id"></TD>
</TR>
<TR><TD WIDTH="40%" ALIGN="right">New Name: </TD>
<TD WIDTH="60%"><INPUT TYPE="text" NAME="name" VALUE="Mickey"></TD>
</TR>
<TR><TD WIDTH="40%" ALIGN="right">New Address: </TD>
<TD WIDTH="60%">
<INPUT TYPE="text" NAME="address" VALUE="St. Louis, MO">
</TD>
</TR>
<TR><TD WIDTH="40%" ALIGN="right">New Phone: </TD>
<TD WIDTH="60%">
<INPUT TYPE="text" NAME="phone" VALUE="555-555-1234">
</TD>
</TR>
<TR><TD COLSPAN="2" ALIGN="center">
<INPUT TYPE="submit" NAME="btnSubmit" VALUE="Update Profile"></TD>
</TR>
</TABLE>
</FORM>
</BODY>
</HTML
2. UpdateEmployeeInfo.jsp:
<HTML>
<HEAD>
<meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/>
<TITLE>Updating Employee Information</TITLE>
</HEAD>
<BODY>
<% response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
response.setDateHeader ("Expires", 0);
%>
<jsp:useBean id="empInfo"
class="com.ora.jsp.beans.employee23.EmployeeInfoBean" >>>>>>>>>>>>>3.
scope="request"/>
<jsp:setProperty name="empInfo" property="*" />
<% empInfo.updateDatabase(); %> >>>>>>>>>>>>>3b.
<jsp:forward page="PresentChangeOfEmployeeData.jsp" /> >>>>>>>>>>>>>4.
</BODY>
</HTML>
3. com.ora.jsp.beans.employee23.EmployeeInfoBean <-------------3.
package com.ora.jsp.beans.employee23;
import java.sql.*;
public class EmployeeInfoBean {
private String name, address, phone;
private int id;
public void setName(String input){
name = input;
public String getName(){
return name;
public void setAddress(String input){
address = input;
public String getAddress(){
return address;
public void setPhone(String input){
phone = input;
public String getPhone(){
return phone;
public void setId(int input){
id = input;
public int getId(){
return id;
public void updateDatabase(){                                       <-------3b.
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver").newInstance();
Connection conn =
DriverManager.getConnection("jdbc:odbc:example");
String sql = "UPDATE EMPLOYEEINFO SET " +
"NAME=?, ADDRESS=?, PHONE=? WHERE ID=?";
PreparedStatement statement = conn.prepareStatement(sql);
statement.setString(1, name);
statement.setString(2, address);
statement.setString(3, phone);
statement.setInt(4, id);
statement.executeQuery();
statement.close();
conn.close();
catch (Exception e) {}
4. PresentChangeOfEmployeeData.jsp <---------4.
<HTML>
<HEAD>
<meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/>
<TITLE></TITLE>
</HEAD>
<BODY>
<% response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
response.setDateHeader ("Expires", 0);
%>
<%@ include file="CompanyBanner.html"%>
<%@ page import="java.sql.*" %>
<jsp:useBean id="empInfo"
class="com.ora.jsp.beans.employee23.EmployeeInfoBean"
scope="request"/>
<CENTER>
<FONT SIZE="5" COLOR="navy">
Your New Information
</FONT>
</CENTER>
<TABLE WIDTH="100%" BORDER="1">
<%
int employeeID = empInfo.getId();
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver").newInstance(); <--------4b,
Connection conn =
DriverManager.getConnection("jdbc:odbc:example");
Statement statement = conn.createStatement();
String sql = "SELECT * FROM EMPLOYEEINFO WHERE ID = " + employeeID;
ResultSet rs = statement.executeQuery(sql);
while(rs.next()){
%>
<TR><TD ALIGN="right" WIDTH="50%">Name:</TD>
<TD WIDTH="50%"><%= rs.getString("NAME") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Address:</TD>
<TD WIDTH="50%"><%= rs.getString("ADDRESS") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Phone Number:</TD>
<TD WIDTH="50%"><%= rs.getString("PHONE") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Work Status:</TD>
<TD WIDTH="50%"><%= rs.getString("WORKSTATUS") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Total Sick Days:</TD>
<TD> <%= rs.getString("TOTALSICKDAYS") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Taken Sick Days: </TD>
<TD><%= rs.getString("TAKENSICKDAYS") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Total Personal Time(in hours): </TD>
<TD><%= rs.getString("TOTALPERSONALTIME") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Taken Personal Time(in hours): </TD>
<TD><%= rs.getString("TAKENPERSONALTIME") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Health Care Plan:</TD>
<TD WIDTH="50%"><%= rs.getString("HEALTHCAREPLAN") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Dental Plan:</TD>
<TD WIDTH="50%"><%= rs.getString("DENTALPLAN") %></TD>
</TR>
<TR><TD ALIGN="right" WIDTH="50%">Vision Plan:</TD>
<TD WIDTH="50%"><%= rs.getString("VISIONPLAN") %></TD>
</TR>
<% }//end while loop
} // end try block
catch (Exception e) {};
%>
</TABLE>
<%@ include file="ch24_SiteNavigator.html" %>
</BODY>
</HTML>

<%
String dept_name=request.getParameter("D1");
String itmp,itmcd,sn;
%>
<%
Connection con;
PreparedStatement ps;
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con=DriverManager.getConnection("jdbc:odbc:acc");
Statement stmt=con.createStatement();
ResultSet rs=stmt.executeQuery("select * from item_details where Item_Name='"+dept_name+"'
%>
<td> Product name</td>
<td>Product description</td>
<td><Product code</td>
<td>Product price</td></tr>
<form method=post action="mycreate.jsp">
<%
while(rs.next())
%><tr>
<%=rs.getString(1)%></td>
<%=rs.getString(4)%></td>
<td><font color="#ffffff" size="3" face="arial unicode
ms">    <%=rs.getString(3)%></td>
<% String temp=rs.getString(3);%>
<%=temp%>
<td>
<%=rs.getString(5)%></td>
<td><input type=submit value="Add to cart"></td></tr>
<form method=post action="mycreate.jsp">
<%
con.close();
%>
</tr>
</table></tr></table></tr></table>
</form>
</form>
I want the value of rs.getString(3) in a variable

Urgent please: lost all datas while sync my new iPhone. how can i retrieve my old datas? through icloud?

urgent please: I have a new iphone 4S and while sync with itunes, it was not done using the data of my old iphone but with a new virgin iphone. how can I retrieve and sync with my old datas? through icloud? or have I lost everything? please help

to be more precise
I have saved all my datas of my old iphone on itunes and icloud. I got a new phone 4s that I connected to itunes in order to load it and sync with my old datas. but I don't konw how but when itunes sync my new iphone i did not take my old datas. at the end of the sync process, I got an iphone totally virgin, but none of my previous apps, neither contact neither calendar neither anything. what happened? did itunes erased all my previous datas?? i hope not but if it's the case, can I recuperate my old datas through icloud? please help because as a lot of us, all my life is in this iphone.. (contacts, photos of my 18months girl, etc etc)
thank you very much

HT1766 I have forgotten my iPhone backup password. Is there a way of getting it as I am trying to load my old data from iPhone 4 to an iPhone 5?

I have forgotten my iPhone backup password. Is there a way of getting it as I am trying to load my old data from iPhone 4 to an iPhone 5?

If on a Mac, and you elected to save such to your Keychain, you can recover it from your Keychain. Otherwise, you can't.
While you can continue to sync/backup, if you can't remember it & want to remove it, you'll have to delete your existing backups & restore the phone as a new device. Your data will be unrecoverable.

HR_MAINTAIN_MASTERDATA, buffer gives old data

Similar Messages

Maybe you are looking for